{"product_id":"920915-furnace-control-board-nordyne-g7-m7-replaces-624742","title":"920915 Furnace Control Board for Nordyne G7 M7 — Replaces 624742","description":"\u003ch2\u003e920915 Furnace Control Board for Nordyne G7 M7 — Replaces 624742\u003c\/h2\u003e\n\u003cp\u003eThe 920915 integrated furnace control board is a direct replacement control for Nordyne and Nortek single-stage gas furnaces in the G7 and M7 series, including Miller, Intertherm, Tappan, Frigidaire and Gibson models. It replaces 624742, 624690, 624844, 904840 and 277820, runs on 24 VAC control voltage with hot surface ignition, and sequences the inducer, gas valve and PSC blower while monitoring flame and safety limits through a single on-board LED diagnostic.\u003c\/p\u003e\n\u003ch3\u003e📋 Key Takeaways\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eDirect Replacement:\u003c\/strong\u003e Replaces 624742, 624690, 624844, 904840 and 277820 on Nordyne G7 and M7 single-stage gas furnaces.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eNortek Family Coverage:\u003c\/strong\u003e Fits G7 and M7 furnaces sold as Nordyne, Miller, Intertherm, Tappan, Frigidaire, Gibson and Broan.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eSingle-Stage 24 VAC Control:\u003c\/strong\u003e 24 VAC control voltage with a 24 VAC 60 Hz input — matched to the original 920915 application.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eHot Surface Ignition:\u003c\/strong\u003e Drives the HSI igniter and proves flame through the flame sensor, then opens the gas valve only when ignition is confirmed.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eOn-Board Diagnostics:\u003c\/strong\u003e An LED flash code reports pressure switch, limit and flame faults, so a no-heat call can be traced before parts are swapped.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eCheck Before You Order:\u003c\/strong\u003e Read the part number on your old board — this is not a universal control board for other furnace brands.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;clear:both;width:100%;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;table-layout:fixed;word-wrap:break-word;\"\u003e\n  \u003ctr\u003e\n\u003cth style=\"width: 35%;\"\u003eFeature\u003c\/th\u003e\n\u003cth\u003eBenefit (What It Means for You)\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e\u003cstrong\u003eIntegrated Furnace Control (IFC)\u003c\/strong\u003e\u003c\/td\u003e\n    \u003ctd\u003eOne board handles the full single-stage heating sequence — inducer proof, hot surface igniter warm-up, gas valve timing, blower on\/off delay and cool-down — so the furnace runs the way the original control ran it.\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e\u003cstrong\u003eReplaces 624742 624690 624844 904840 277820\u003c\/strong\u003e\u003c\/td\u003e\n    \u003ctd\u003eA furnace whose parts list shows any of these numbers uses this board, which removes the guesswork of matching an earlier revision to the current 920915 part number.\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e\u003cstrong\u003e24 VAC Control, 24 VAC 60 Hz Input\u003c\/strong\u003e\u003c\/td\u003e\n    \u003ctd\u003eStandard residential furnace control voltage with the same terminal designations as the original board, so existing thermostat, gas valve and blower wiring transfers without modification.\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e\u003cstrong\u003eHot Surface Ignition with Flame Sensing\u003c\/strong\u003e\u003c\/td\u003e\n    \u003ctd\u003eThe board proves flame through the flame sensor on every call for heat and closes the gas valve if proof is lost, which protects against unburned gas accumulating in the heat exchanger.\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e\u003cstrong\u003eLED Flash-Code Diagnostics\u003c\/strong\u003e\u003c\/td\u003e\n    \u003ctd\u003eA single on-board LED reports the fault the board has latched — pressure switch stuck open, open limit, or flame loss — so the failed component is identified before anything is replaced.\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd\u003e\u003cstrong\u003eDrop-In Mounting Footprint\u003c\/strong\u003e\u003c\/td\u003e\n    \u003ctd\u003eThe board mounts on the original standoffs inside the furnace control compartment and keeps the original terminal layout, so no bracket or harness modification is needed.\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3 id=\"compatibility\"\u003eCompatibility \u0026amp; Cross-Reference\u003c\/h3\u003e\n\u003ch4\u003eReplaces \/ Interchange Part Numbers:\u003c\/h4\u003e\n\u003cdiv style=\"overflow-x:auto;clear:both;width:100%;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;table-layout:fixed;word-wrap:break-word;\"\u003e\n  \u003ctr\u003e\n\u003cth style=\"width: 45%;\"\u003eInterchange Part Number\u003c\/th\u003e\n\u003cth\u003eSystem \/ Note\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e920915\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBoard number of this replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e624742\u003c\/td\u003e\n\u003ctd\u003eNordyne G7 \/ M7 control (earlier number for this board)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e624690\u003c\/td\u003e\n\u003ctd\u003eNordyne single-stage control (same board family)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e624844\u003c\/td\u003e\n\u003ctd\u003eNordyne \/ Nortek G7 series control\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e904840\u003c\/td\u003e\n\u003ctd\u003eNordyne \/ Intertherm earlier control\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e277820\u003c\/td\u003e\n\u003ctd\u003eNordyne legacy control number\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp\u003eThe 920915 number is the current listing for this control; the 624742, 624844 and 904840 numbers are the earlier revisions of the same single-stage board, and 277820 appears in older Nordyne cross-reference lists.\u003c\/p\u003e\n\u003ch4\u003eCommon Applications:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eNordyne G7 series single-stage gas furnaces — G7SA, G7SK, G7SC and G7SL models, for example G7SA090-35C1, G7SA126-45D1 and G7SK108-35C1\u003c\/li\u003e\n  \u003cli\u003eNordyne KG7 series furnaces — KG7SA, KG7SC, KG7SD, KG7SK, KG7SL and KG7SM models, for example KG7SA-072C-24B\u003c\/li\u003e\n  \u003cli\u003eFrigidaire FG7 series furnaces — FG7SA, FG7SC, FG7SD, FG7SK, FG7SL and FG7SM models, for example FG7SA045C-23A and FG7SA126C-45D\u003c\/li\u003e\n  \u003cli\u003eNordyne M7 series furnaces — M7RL models, plus CMF95 \/ CMF95072 heating units\u003c\/li\u003e\n  \u003cli\u003eMiller, Intertherm, Tappan, Gibson, Broan and Westinghouse furnaces built on the Nordyne G7 \/ M7 platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a Nordyne-platform control, not a universal board. Confirm the number on your old board or your furnace model plate before ordering; a board from a different manufacturer will not interchange even when the connector count looks similar.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv style=\"overflow-x:auto;clear:both;width:100%;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;table-layout:fixed;word-wrap:break-word;\"\u003e\n  \u003ctr\u003e\n\u003ctd style=\"width: 40%;\"\u003e\u003cstrong\u003ePart Number\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e920915\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl Type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eIntegrated furnace control (IFC), single stage\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIgnition\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHot surface ignition (HSI) with flame sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl Voltage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 VAC\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eInput Power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 VAC, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eLoads Controlled\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGas valve, inducer motor, PSC blower, limit and pressure switch inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDiagnostics\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOn-board LED flash code\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eReplaces\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e624742, 624690, 624844, 904840, 277820\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible Series\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNordyne G7 and M7 single-stage gas furnaces (also Miller, Intertherm, Tappan, Frigidaire, Gibson, Broan)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNet Weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8.6 oz (244 g)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackage Contents\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 × 920915 integrated furnace control board\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eiFJF Quality Guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003ch3\u003eWhy Choose iFJF?\u003c\/h3\u003e\n\u003cp\u003eiFJF supplies furnace control boards factory-direct, so the replacement part arrives without dealer markup. What you can verify before you buy:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eOpen cross-reference:\u003c\/strong\u003e every covered number (624742, 624690, 624844, 904840, 277820) is listed above — match your old board first.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eSpecification transparency:\u003c\/strong\u003e 24 VAC control voltage, 24 VAC 60 Hz input, hot surface ignition and LED diagnostics are stated openly so they can be compared with your original control.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eSame terminal layout:\u003c\/strong\u003e terminals follow the original 920915 board, so wires move over one connector at a time with no cutting.\u003c\/li\u003e\n  \u003cli\u003e✅ \u003cstrong\u003eFactory-direct value:\u003c\/strong\u003e supply straight from the manufacturer keeps the price fair compared with an OEM dealer counter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"background:#fff3e0;border:1px solid #ffb74d;border-radius:4px;padding:12px;margin-bottom:16px;\"\u003e\n  \u003cstrong\u003eInstallation note:\u003c\/strong\u003e a control board swap should be performed by a qualified HVAC contractor or licensed electrician. Turn off the furnace power at the disconnect and shut off the gas supply before removing the old board, and confirm 0 V with a meter. If you are unsure whether this board matches your furnace, message us with the model number from the furnace rating plate before ordering.\n\u003c\/div\u003e\n\u003cp\u003eNeed help confirming fitment? Our support team answers fitment questions before you order — \u003cstrong\u003esupport@ifjf.com\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eLooking for a different furnace control board? Compare our \u003ca href=\"\/products\/1170063-furnace-control-board-replaces-1138-200-icp-furnaces\"\u003e1170063 furnace control board for ICP furnaces\u003c\/a\u003e, our \u003ca href=\"\/products\/50a55-843-furnace-control-board-compatible-white-rodgers-lennox\"\u003e50A55-843 furnace control board for White-Rodgers and Lennox furnaces\u003c\/a\u003e, or our \u003ca href=\"\/products\/1012-925c-furnace-control-board-24-vac-hsi-compatible-rheem-ruud\"\u003e1012-925C furnace control board for Rheem and Ruud furnaces\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp style=\"margin-top:12px;\"\u003e📂 \u003cstrong\u003eBrowse More:\u003c\/strong\u003e \u003ca href=\"\/collections\/electronics\"\u003eAll Electronics Products →\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eQ: Will the 920915 control board fit my furnace?\u003c\/h4\u003e\n\u003cp\u003eA: The 920915 board is built for Nordyne and Nortek single-stage gas furnaces in the G7 and M7 series, sold under the Nordyne, Miller, Intertherm, Tappan, Frigidaire, Gibson and Broan brands. Before ordering, read the part number printed on the old board: if it is 624742, 624690, 624844, 904840 or 277820, this board is the direct replacement. The Cross-Reference table above lists every covered number.\u003c\/p\u003e\n\u003ch4\u003eQ: Which part numbers does the 920915 board replace?\u003c\/h4\u003e\n\u003cp\u003eA: The 920915 integrated furnace control replaces 624742, 624690, 624844, 904840 and 277820. On Nordyne G7 and M7 furnaces the 624742 number was later carried as 920915, so a furnace whose parts list shows either number uses this same board.\u003c\/p\u003e\n\u003ch4\u003eQ: What are the electrical specifications of the 920915 board?\u003c\/h4\u003e\n\u003cp\u003eA: The 920915 board runs on 24 VAC control voltage with a 24 VAC 60 Hz input, drives a single-stage gas valve, and uses hot surface ignition with a flame sensor for proof of flame. It also switches the inducer motor and the PSC blower, and reports faults through an on-board LED flash code.\u003c\/p\u003e\n\u003ch4\u003eQ: Is this a genuine Nordyne OEM board?\u003c\/h4\u003e\n\u003cp\u003eA: No. This is an iFJF third-party replacement built to the same 24 VAC single-stage control specification and the same terminal layout as the original 920915 board. It is not sold as a Nordyne or Nortek OEM part, and the price reflects factory-direct supply rather than dealer markup.\u003c\/p\u003e\n\u003ch4\u003eQ: How do I install the 920915 control board?\u003c\/h4\u003e\n\u003cp\u003eA: Turn the furnace power off at the disconnect and shut off the gas supply, then photograph every connector before removing the old board. Unplug one connector at a time and move it to the identically marked terminal on the new board, mount the board on the original standoffs, restore power, and watch one full heat cycle end to end. A qualified HVAC technician should do the work if you are not comfortable with gas appliances.\u003c\/p\u003e\n\u003ch4\u003eQ: How do I know my old control board is actually the problem?\u003c\/h4\u003e\n\u003cp\u003eA: Typical control board failures are no ignition, the blower or inducer running continuously, a burner that starts and stops without a pattern, or a board LED that shows a fault code or stays dark. Check the low-voltage fuse on the board, the rollout and limit switches, the condensate switch and the ground first, and read the flash code from the label on your own board — codes differ between manufacturers — because a blown fuse or an open limit switch produces the same no-heat symptom as a failed board.\u003c\/p\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × 920915 integrated furnace control board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Problems with Nordyne Furnace Control Boards — Solved by iFJF\u003c\/h3\u003e\n\u003cp style=\"font-size:0.95em;color:#666;\"\u003eWe read verified owner reviews of Nordyne-platform replacement boards. Here is what keeps coming up — and how this board addresses it:\u003c\/p\u003e\n\u003cdiv style=\"overflow-x:auto;clear:both;width:100%;-webkit-overflow-scrolling:touch;\"\u003e\u003ctable style=\"width:100%;table-layout:fixed;word-wrap:break-word;\"\u003e\n  \u003ctr style=\"background:#fafafa;\"\u003e\n\u003cth style=\"width:35%;\"\u003e❌ What Owners Complain About\u003c\/th\u003e\n\u003cth style=\"width:5%;\"\u003e\u003c\/th\u003e\n\u003cth style=\"width:60%;\"\u003e✅ How This Board Addresses It\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:10px;vertical-align:top;\"\u003e\n\u003cstrong\u003e\"It says compatible but my furnace did not work\"\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size:0.85em;color:#888;\"\u003e— the #1 cause of returns in this category\u003c\/span\u003e\n\u003c\/td\u003e\n    \u003ctd style=\"text-align:center;vertical-align:top;padding:10px;\"\u003e→\u003c\/td\u003e\n    \u003ctd style=\"padding:10px;vertical-align:top;\"\u003e\n\u003cstrong\u003eBoard number listed before the price\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size:0.9em;\"\u003e624742, 624690, 624844, 904840 and 277820 are printed in the table above, so the old board can be matched before ordering. This is a Nordyne-platform control, not a universal board.\u003c\/span\u003e\n\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:10px;vertical-align:top;\"\u003e\n\u003cstrong\u003e\"The blower runs but there is no heat\"\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size:0.85em;color:#888;\"\u003e— usually a flame-sensing or limit fault, not always the board\u003c\/span\u003e\n\u003c\/td\u003e\n    \u003ctd style=\"text-align:center;vertical-align:top;padding:10px;\"\u003e→\u003c\/td\u003e\n    \u003ctd style=\"padding:10px;vertical-align:top;\"\u003e\n\u003cstrong\u003eFlash code before parts\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size:0.9em;\"\u003eThe on-board LED latches the actual fault — pressure switch, open limit or flame loss — so the fuse, rollout switch and flame sensor are checked before the board is condemned.\u003c\/span\u003e\n\u003c\/td\u003e\n  \u003c\/tr\u003e\n  \u003ctr\u003e\n    \u003ctd style=\"padding:10px;vertical-align:top;\"\u003e\n\u003cstrong\u003e\"The connectors did not line up with my old board\"\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size:0.85em;color:#888;\"\u003e— common when an earlier revision is swapped blind\u003c\/span\u003e\n\u003c\/td\u003e\n    \u003ctd style=\"text-align:center;vertical-align:top;padding:10px;\"\u003e→\u003c\/td\u003e\n    \u003ctd style=\"padding:10px;vertical-align:top;\"\u003e\n\u003cstrong\u003eSame terminal designations\u003c\/strong\u003e\u003cbr\u003e\u003cspan style=\"font-size:0.9em;\"\u003eTerminals follow the original 920915 layout, so wiring moves connector by connector from the photographed old board — no cutting, no splicing.\u003c\/span\u003e\n\u003c\/td\u003e\n  \u003c\/tr\u003e\n\u003c\/table\u003e\u003c\/div\u003e\n\u003cp style=\"margin-top:12px;font-size:0.9em;\"\u003e🔎 \u003cem\u003eWe read the 1-star and 2-star reviews so you don't have to. This board is built around the real failure modes on Nordyne G7 and M7 furnaces — not just a spec sheet.\u003c\/em\u003e\u003c\/p\u003e\n\u003cdiv style=\"background:#f0f7ff;border:1px solid #b8d4f0;border-radius:6px;padding:16px;margin-top:20px\"\u003e\n  \u003cstrong\u003eFactory Direct Supply \u0026amp; Wholesale\u003c\/strong\u003e — iFJF is a direct manufacturer of high-performance replacement parts for heating and filtration systems. Custom specifications and bulk orders are highly welcome. Contact us for exclusive dealer pricing and volume discounts. Backed by \u003cstrong\u003eISO 9001:2015\u003c\/strong\u003e and \u003cstrong\u003eIATF 16949:2016\u003c\/strong\u003e quality management system certifications.\u003cbr\u003e\n  \u003cstrong\u003eEmail:\u003c\/strong\u003e support@ifjf.com\n\u003c\/div\u003e\n","brand":"iFJF","offers":[{"title":"Default Title","offer_id":52444587262198,"sku":"FJ-CB-920915","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0606\/3836\/3894\/files\/dc8c58e3c8232157f99c0462a2765aa0.jpg?v=1795155126","url":"https:\/\/ifjf.net\/products\/920915-furnace-control-board-nordyne-g7-m7-replaces-624742","provider":"iFJF Direct","version":"1.0","type":"link"}