Jeep Parts

High-Visibility Fire Extinguisher Mount for Jeep Wrangler JK The iFJF Adjustable Roll Bar Fire Extinguisher Holder in eye-catching red gives you the same rugged functionality as our black version, with the added benefit of high visibility. In an emergency, every second counts — the bright red finish makes your extinguisher instantly visible from any angle. Engineered specifically for the Jeep Wrangler JK (2007–2018) roll bar, this mount features a fully adjustable clamp design with rubber-lined contact surfaces that grip firmly without damaging your roll bar. Key Features High-Visibility Red Finish — Instantly locate your extinguisher in low light or emergency situations Adjustable Roll Bar Fit — Compatible with all Jeep Wrangler JK (2007–2018) 2-door and 4-door roll bars 3lb Fire Extinguisher Capacity — Fits standard 3lb automotive extinguishers (sold separately) Quick-Release Strap — Deploy your extinguisher in under 2 seconds Powder-Coated Steel Construction — Red finish resists rust, corrosion, fading, and chipping No-Drill Installation — Clamp-on design requires zero permanent modifications Rubber-Lined Clamps — Protects roll bar finish and eliminates rattles Vehicle Compatibility Jeep Wrangler JK 2-Door — 2007–2018 Jeep Wrangler JK Unlimited (4-Door) — 2007–2018 Compatible with hard top, soft top, and dual top configurations Fits factory and most aftermarket sport cage / roll bar upgrades Why Red Matters: The Case for Visibility When smoke starts filling the cabin or you smell burning wiring on the trail, you don't want to be searching for a black bracket in a dark footwell. The red powder-coat finish is instantly recognizable — even in low light, dust, or smoke conditions. It meets the standard color convention for fire safety equipment, making it intuitive for passengers or fellow off-roaders to locate and deploy. Trail Safety Checklist A fire extinguisher is just one piece of a complete off-road safety kit. For maximum trail preparedness, consider pairing this mount with: first aid kit (trauma-focused for remote locations), recovery gear (tow strap, shackles, kinetic rope), tire repair kit and air compressor, emergency communication device (satellite messenger or GMRS radio), and extra water and emergency food rations. Frequently Asked Questions Q: Does the red finish fade in the sun?A: No. Our powder-coating process includes UV-stable pigments designed to resist fading even with years of direct sun exposure. Q: Is the red version the same as the black version?A: Yes — identical construction, materials, and fitment. The only difference is the red powder-coat finish for enhanced visibility. Q: Will this hold a 5lb extinguisher?A: No, this mount is specifically designed for 3lb extinguishers. Using a larger extinguisher may result in an insecure fit. Q: Can I install it behind the driver's seat?A: Yes. The 360-degree adjustable clamp lets you position it in any orientation around the roll bar — behind the driver, passenger, or in the cargo area. Q: Does it rattle on rough roads?A: No. The rubber-lined clamps absorb vibration and the quick-release strap keeps the extinguisher firmly seated even on washboard roads and rock gardens. Related Products Complete your build with these complementary iFJF products: iFJF Fire Extinguisher Holder Black — Jeep JK iFJF Door Cable Repair Kit 32 Ends iFJF Jeep 4.0L Exhaust Manifold 1991-2003 Frequently Asked Questions Q: Will this fit my 2007-2018 Wrangler?A: Designed for 2007-2018 Jeep Wrangler Wrangler. Verify your exact year and model (2-door vs 4-door) before ordering. Q: Is installation difficult?A: Most Jeep accessories are designed for DIY installation with basic hand tools. Average install time is 15-45 minutes. Q: What material is this made from?A: Manufactured from high-grade materials including billet aluminum, stainless steel, and UV-resistant polymers selected for off-road durability. Q: Is this compatible with aftermarket modifications?A: Most accessories work with stock and mildly modified Wranglers. For extensive modifications, verify fitment with product dimensions. Q: How does this compare to OEM?A: iFJF aftermarket accessories match or exceed OEM quality at a more accessible price point with rigorous quality control for harsh off-road conditions. Q: What is the warranty?A: All iFJF products come with a 1-year warranty against manufacturing defects. 🔧 Related Products Browse All Jeep Wrangler Parts — Compatible gaskets, hardware & upgrades Exhaust Gaskets & Hardware — Fresh gaskets recommended for every install 📖 Helpful Resources iFJF Installation Guides — Step-by-step tutorials for your vehicle Contact Our Support Team — Expert advice for your setup

Read more less

Trail-Ready Fire Extinguisher Mount for Jeep Wrangler JK The iFJF Adjustable Roll Bar Fire Extinguisher Holder provides a secure, quick-access mounting solution for your Jeep Wrangler JK (2007–2018). Whether you're hitting the trails, overlanding, or just want peace of mind on the road, this mount keeps a 3lb fire extinguisher within arm's reach at all times. Engineered specifically for the JK's roll bar diameter, this holder features a fully adjustable clamp design that grips firmly without scratching or damaging your roll bar's finish. Key Features Adjustable Roll Bar Fit — Compatible with Jeep Wrangler JK (2007–2018) 2-door and 4-door Unlimited roll bars 3lb Fire Extinguisher Capacity — Fits standard 3lb automotive fire extinguishers (extinguisher sold separately) Quick-Release Design — Rapid access in emergencies; no fumbling with straps or buckles Heavy-Duty Powder-Coated Steel — Black finish resists rust, corrosion, and UV damage No-Drill Installation — Clamps directly onto roll bar; no permanent modifications required Rubber-Lined Clamps — Prevents scratching and provides vibration-dampening grip 360-Degree Adjustable Mounting Angle — Position the extinguisher for optimal accessibility Vehicle Compatibility Jeep Wrangler JK — 2007–2018 (2-door and 4-door Unlimited) Fits factory and most aftermarket roll bars Compatible with hard top and soft top configurations Why Carry a Fire Extinguisher Off-Road? Vehicle fires can happen anywhere, but they're especially dangerous on remote trails where emergency services are far away. Common off-road fire hazards include fuel leaks, electrical shorts from aftermarket accessories, overheated brakes igniting dry brush, and catalytic converter contact with tall grass. A properly mounted fire extinguisher gives you critical seconds to respond before a small flame becomes a total loss. Installation Guide Choose your mounting location on the roll bar — driver or passenger side, front or rear Loosen the clamp bolts to open the mounting brackets Position brackets around the roll bar at your desired angle Tighten bolts evenly until the holder is secure — do not overtighten Insert your 3lb fire extinguisher into the cradle and secure the quick-release strap Test that the extinguisher can be removed quickly and easily Frequently Asked Questions Q: Does this come with a fire extinguisher?A: No, this listing is for the mounting bracket only. You'll need a standard 3lb automotive fire extinguisher (sold separately). Q: Will this fit a 4-door JK Unlimited?A: Yes! The roll bar diameter is the same on both 2-door and 4-door (Unlimited) Wrangler JK models from 2007–2018. Q: Can I install this on the driver or passenger side?A: Yes. The mount is fully reversible and 360-degree adjustable — install it wherever provides the quickest access for you. Q: Will this scratch my roll bar?A: No. The clamps feature rubber-lined contact surfaces that protect your roll bar's paint or powder coat finish. Q: Is this legal for on-road use?A: Yes. Carrying a fire extinguisher is legal and recommended in all 50 states. It's also required equipment for many organized off-road events. Related Products Complete your build with these complementary iFJF products: iFJF Fire Extinguisher Holder Red — Jeep JK iFJF Truck Cap Clamps 4-Pack — Chevy/GMC iFJF Jeep 4.0L Exhaust Manifold 1991-2003 Frequently Asked Questions Q: Will this fit my 2007-2018 Wrangler?A: Designed for 2007-2018 Jeep Wrangler Wrangler. Verify your exact year and model (2-door vs 4-door) before ordering. Q: Is installation difficult?A: Most Jeep accessories are designed for DIY installation with basic hand tools. Average install time is 15-45 minutes. Q: What material is this made from?A: Manufactured from high-grade materials including billet aluminum, stainless steel, and UV-resistant polymers selected for off-road durability. Q: Is this compatible with aftermarket modifications?A: Most accessories work with stock and mildly modified Wranglers. For extensive modifications, verify fitment with product dimensions. Q: How does this compare to OEM?A: iFJF aftermarket accessories match or exceed OEM quality at a more accessible price point with rigorous quality control for harsh off-road conditions. Q: What is the warranty?A: All iFJF products come with a 1-year warranty against manufacturing defects. 🔧 Related Products Browse All Jeep Wrangler Parts — Compatible gaskets, hardware & upgrades Exhaust Gaskets & Hardware — Fresh gaskets recommended for every install 📖 Helpful Resources iFJF Installation Guides — Step-by-step tutorials for your vehicle Contact Our Support Team — Expert advice for your setup

Read more less

Product Overview The factory steering stabilizer on a JK Wrangler hangs low — right where it meets rocks, logs, and trail obstacles. One solid impact can bend the shaft or tear the mount off, causing death wobble and a ruined trail day. The iFJF Steering Stabilizer Relocation Bracket moves the stabilizer up and out of harm's way. CNC-fabricated from stainless steel with black powder coat, it's a simple, permanent fix that protects one of your steering system's most vulnerable components. Key Features Raises Stabilizer Above Tie Rod — Relocates stabilizer to a higher, protected position behind the axle, dramatically reducing rock strike risk. Universal Stabilizer Compatibility — Fits any stabilizer with 1-3/8" mount width and 1/2" bolt. OEM, Bilstein, Fox, Rancho — all compatible. Stainless Steel, Black Powder Coat — High-strength stainless resists rust and corrosion. Black powder coat for clean appearance and chip resistance. LHD Design — Engineered for US-spec left-hand drive JK Wranglers. Bolt-on using existing factory holes — no drilling. Cost-Effective Protection — A bent stabilizer costs $50-100+ to replace. A torn mount requires welding. This bracket prevents both for a fraction of the cost. Compatibility Make Model Years Jeep Wrangler JK 2-Door 2007-2018 Jeep Wrangler JK Unlimited 2007-2018 Specifications Specification Detail Material Stainless steel Finish Black powder coat Mount Width 1-3/8" (universal) Bolt Size 1/2" SKU FJ-CC03-CK Frequently Asked Questions Q: Aftermarket stabilizer compatible?A: Yes — any stabilizer with 1-3/8" mount width and 1/2" bolt fits. That covers virtually everything on the market. Q: Remove stabilizer for install?A: Unbolt from factory mount, install bracket, reattach to new position. ~15-20 minutes with basic tools. Q: Affect steering feel?A: No — the bracket only relocates the mount point. Stabilizer angle, stroke, and damping remain identical. Q: RHD compatible?A: Designed for LHD (US/Canada spec) only. RHD models may have different steering geometry. Q: Needed if I don't rock crawl?A: Even on forest roads, the factory stabilizer is a low-hanging target. Cheap insurance against a ruined steering day. Related Products Swaybar Quick Disconnect — JK 2.5" Series II Lift Kit — JK Brake Line Anchor — JK/JL Related Blog Posts iFJF Guides — Installation & Maintenance Jeep Wrangler Lift Kit Buyer's Guide

Read more less