Tesla Parts

Product Overview The iFJF Center Console Mats Cup Holder Liner for 2017-2019 Tesla Model 3 Accessories 7PC is a premium aftermarket replacement engineered to meet or exceed OEM specifications for the Tesla Model 3 (2017-2019). Replaces OEM part 2017-2019. Manufactured with precision tooling and quality materials, this direct-fit component restores factory function at a fraction of the dealership cost. Whether you are refreshing a daily driver, completing a restoration, or performing routine maintenance, this iFJF part delivers dependable performance backed by US-based customer support. Key Features Custom-Fit for Tesla Model 3 — Precision laser-measured for perfect console coverage. Non-Slip Rubber Material — Keeps items from sliding during spirited driving. Easy to Clean — Removable liners rinse clean with water. Protects original console. Complete 7-Piece Set — Covers cup holders, center console, door pockets, and armrest. OEM-Look Integration — Low-profile design blends with Model 3's minimalist interior. Specifications Spec Value Replaces OEM 2017-2019 Compatible Tesla Model 3 Year Range 2017-2019 Brand iFJF Condition New Why Choose iFJF When your Tesla Model 3 needs a replacement, choose iFJF for OEM quality at a significantly better value. Our parts are manufactured to the same dimensional specifications using equivalent or upgraded materials — often addressing known OEM weak points with improved designs. US-based support and hassle-free returns mean you can buy with confidence. Installation Tips Prepare the work area — gather tools and ensure vehicle/equipment is secured. Remove the old component — take reference photos before disconnection. Clean mounting surfaces thoroughly for proper fit of the new part. Install the new iFJF part — follow orientation markings and tighten to specification. Double-check connections and hardware before testing. Test operation to confirm proper function before returning to service. Frequently Asked Questions Q: Will this fit my Tesla Model 3?A: Yes, designed for the Tesla Model 3 (2017-2019). Always verify your year, make, and model before ordering. Q: Does this replace OEM part 2017-2019?A: Yes. Built to match or exceed OEM 2017-2019 specifications. Direct bolt-on — no modifications required. Q: How difficult is the installation?A: Rated DIY-friendly for those with basic mechanical skills and common hand tools. Most installations take 30-90 minutes. Q: What warranty is included?A: All iFJF products are backed by our satisfaction guarantee. Contact our US-based support team for prompt resolution. Q: How does this compare to OEM?A: Built to same dimensions using equivalent or upgraded materials. Often addresses known OEM weak points with improved designs.

Read more less

Product Overview Restore your 2012-2018 Tesla Model S's handling, steering precision, and ride comfort with this premium front forward suspension control arm kit. Worn control arms cause clunking noises, uneven tire wear, and vague steering — our direct-fit replacement kit solves all these issues with precision-engineered components that meet or exceed OEM specifications. Key Features Direct OEM Fit: Precision-engineered to exact OEM specifications for 2012-2018 Tesla Model S — no modifications, adapters, or special tools required. Pre-Installed Ball Joints: Ball joints come pre-assembled and pre-greased from the factory, eliminating the need for a shop press during installation. Heavy-Duty Steel Construction: Forged steel construction with corrosion-resistant coating provides exceptional strength and long service life in all weather conditions. Premium Bushings: High-durometer rubber bushings absorb road vibrations while maintaining precise suspension geometry under load. Complete Hardware Included: Each kit includes all necessary mounting bolts, nuts, and washers — no need to reuse corroded OEM hardware. Compatibility Year Make Model Position 2012 Tesla Model S Front Forward 2013 Tesla Model S Front Forward 2014 Tesla Model S Front Forward 2015 Tesla Model S Front Forward 2016 Tesla Model S Front Forward 2017 Tesla Model S Front Forward 2018 Tesla Model S Front Forward Symptoms of Worn Control Arms Clunking or knocking noises when driving over bumps or during acceleration/braking Uneven or premature tire wear, especially on the inner or outer edges Steering wheel vibration or wandering at highway speeds Loose or vague steering feel — the vehicle doesn't track straight Visible bushing cracks or tears during inspection Why Choose iFJF Direct? OEM-Equivalent Quality: Our control arms are manufactured to the same rigorous standards as original equipment — at a fraction of the dealer price. Pre-Assembled Convenience: Ball joints come pre-installed, saving you time and the cost of a shop press. Rigorous Testing: Every batch undergoes dimensional verification and material testing to ensure perfect fitment. US-Based Support: Get expert suspension advice from our team — we've helped thousands of DIY mechanics get back on the road. Frequently Asked Questions Q: Will these control arms fit my 2012 Tesla Model S?A: Yes! These control arms are specifically designed for 2012-2018 Tesla Model S and are a direct bolt-on replacement. No modifications are required. Q: Do I need an alignment after installation?A: Yes — a professional wheel alignment is strongly recommended after replacing any suspension components. This ensures proper tire wear, handling, and safety. Q: Are the ball joints pre-installed?A: Yes! Ball joints come pre-assembled from the factory with grease, saving you significant labor time and the need for a shop press. Q: What tools do I need for installation?A: Socket set (10mm-24mm), torque wrench, ball joint separator tool, pry bar, jack, and jack stands. A impact wrench is helpful but not required. Most experienced DIYers can complete the job in 3-5 hours. Q: How do these compare to dealer OEM parts?A: Our control arms are manufactured to meet or exceed OEM specifications for material grade, bushing durometer, and dimensional tolerances — at 40-60% less than dealer pricing. Q: Is this sold as a pair (left + right)?A: Yes! This kit includes both driver and passenger side components (where applicable). Always replace control arms in pairs to ensure even suspension performance. Q: What warranty is included?A: All iFJF Direct suspension components include our satisfaction guarantee. Contact us for any fitment or quality concerns.

Read more less

Product Overview Upgrade your vehicle's performance and reliability with the Aluminum Trunk Grocery Bag Hook Replacement for Model 3 2018. Precision-engineered as a direct replacement for Model 3, this component meets or exceeds OEM specifications for fit, form, and function. Whether you're a professional mechanic or a DIY enthusiast, this part delivers dependable quality at just $25.99. Key Features Direct OEM Replacement: Precision-engineered to match factory specifications for seamless fitment Premium Materials: Constructed from high-grade materials for long-lasting durability and performance Rigorous Testing: Each unit undergoes quality inspection to ensure reliable operation Corrosion Resistant: Protective finish guards against rust, road salt, and environmental damage Easy Installation: Designed for straightforward bolt-on replacement with basic hand tools Cost-Effective Alternative: Factory-direct pricing saves you up to 50% vs. dealership parts Compatibility The following table lists confirmed compatible applications. Please verify your vehicle's year, make, model, and engine before ordering. Make Model Year Range Notes Tesla Model 3 2018-2021 Direct fit Specifications Specification Value Brand iFJF Part Type Suspension Control Arm / Auto Component Cross-Reference Numbers 2018, 2021 Material Forged Steel / Aluminum Alloy (varies by part) Finish Anti-Corrosion Coating Fitment Type Direct Replacement Installation Bolt-On Why Choose iFJF OEM-Quality Standards: Every iFJF product is manufactured to meet or exceed OEM specifications for fit, durability, and performance. Rigorous Quality Control: Each component undergoes thorough inspection before shipping to ensure you receive a flawless product. Direct Savings: By selling factory-direct, we eliminate middleman markups — passing significant savings to you compared to dealership pricing. US-Based Support: Our customer service team is ready to help with fitment questions, installation guidance, and order support. Installation Tips Recommended: Professional installation is advised for suspension components. A wheel alignment is strongly recommended after replacing any control arm or suspension part. Tools Needed: Socket set, torque wrench, ball joint separator, jack and jack stands. Always use proper lifting equipment and follow vehicle manufacturer safety procedures. Pro Tip: Mark the position of alignment bolts before removal to help maintain approximate alignment during reassembly. Torque all fasteners to OEM specifications in the correct sequence. Frequently Asked Questions Q: Will this fit my vehicle?A: This part is designed for Model 3. Please verify your vehicle's year, make, model, and sub-model (e.g., Quattro vs. FWD) before ordering. Check the compatibility table above for confirmed fitments. Q: Is this an OEM or aftermarket part?A: This is a premium aftermarket replacement part manufactured to meet or exceed OEM specifications. It provides the same fit, form, and function as the original at a fraction of the dealership price. Q: Do I need a wheel alignment after installation?A: Yes, a professional wheel alignment is strongly recommended after replacing any suspension component to ensure proper tire wear, handling, and safety. Q: What is the warranty?A: All iFJF products come with a 1-year limited warranty against manufacturing defects. Please retain your order confirmation for warranty claims. Q: How long does shipping take?A: Orders typically ship within 1-2 business days. Standard delivery takes 3-7 business days within the continental US. Expedited shipping options are available at checkout.

Read more less

Rear Trunk Sill Plate Interior & Exterior Set Trim Cover for Tesla Model 3 2017-2021 Protect your Tesla Model 3's rear trunk area from scratches, scuffs, and daily wear with the iFJF Rear Trunk Sill Plate Interior & Exterior Set. Precision-engineered from premium stainless steel, this trim cover provides a perfect fit for 2017-2021 Tesla Model 3 vehicles while adding a sleek, modern accent to your cargo area. Whether you're loading groceries, luggage, sports gear, or work equipment, the trunk sill takes the most abuse. This durable guard absorbs impact and prevents unsightly paint damage that can diminish your Tesla's value over time. Vehicle Compatibility Make Model Year Range Body Style Tesla Model 3 2017-2021 All variants Key Features Premium Stainless Steel: Brushed finish resists corrosion, fading, and peeling — maintains a showroom look for years Precision Fit: Laser-measured and CNC-cut to match the exact contours of your Tesla Model 3's trunk sill Scratch & Scuff Protection: Creates a durable barrier between your cargo and the painted trunk sill surface Easy Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean, peel, and press into place in under 10 minutes Enhanced Appearance: Adds a premium, custom look that complements your Tesla's minimalist interior design OEM+ Style: Designed to look like a factory option rather than an aftermarket add-on Technical Specifications Specification Detail SKU FJ-TSL-3-HNWB-SI Material 304 Stainless Steel, Brushed Finish Thickness 0.8mm Adhesive 3M Automotive-Grade Double-Sided Tape (Pre-Applied) Installation Peel-and-Stick, No Drilling Required Installation Instructions Clean: Thoroughly clean the trunk sill area with isopropyl alcohol (included prep pad) to remove all wax, oil, and debris Dry Fit: Position the guard on the sill without removing the adhesive backing to verify alignment Heat (Optional): For best results in cold weather, warm the adhesive and the sill surface with a hair dryer for 30-60 seconds Peel: Remove the adhesive backing gradually, starting from one end Press: Starting from the center and working outward, apply firm, even pressure for 60 seconds across the entire surface Wait: Allow 24 hours for maximum adhesive bonding before exposing to water or car washes Why Protect Your Tesla's Trunk Sill? The trunk sill is one of the most vulnerable areas on any vehicle, and Tesla's painted sill surfaces are particularly susceptible to scratches. Every time you load or unload cargo — groceries, luggage, sports equipment, tools, or pet carriers — items drag across the painted sill. Over time, these micro-scratches accumulate, leaving your trunk opening looking worn and neglected. A stainless steel sill guard not only prevents this damage but also makes cleaning easier: simply wipe down the smooth metal surface instead of scrubbing scratched paint. Frequently Asked Questions Q: Will this fit my 2017-2021 Tesla Model 3?A: Yes. This sill protector is precision-designed for the 2017-2021 Tesla Model 3 rear trunk opening. It follows the exact contour of your vehicle's trunk sill. Q: Does the adhesive damage the paint if I remove it later?A: No. The 3M automotive adhesive is designed to be removable without damaging factory paint when removed properly. Use a heat gun or hair dryer to warm the adhesive, then peel slowly. Any residue can be cleaned with adhesive remover. Q: Will the stainless steel rust or discolor over time?A: No. This guard is made from 304-grade stainless steel with a brushed finish, which is highly resistant to rust, corrosion, and discoloration — even in harsh weather conditions. Q: Can I install this in cold weather?A: For optimal adhesion, the surface temperature should be at least 60°F (15°C). In colder conditions, use a hair dryer to warm both the adhesive backing and the trunk sill surface before installation. Q: Does this interfere with the automatic trunk closing?A: No. The guard is thin (0.8mm) and follows the contour of the sill perfectly. It will not interfere with your Model 3's power liftgate operation or trunk seal.

Read more less

Rear Trunk Sill Outer Bumper Guard Trim Cover for Tesla Model S 2012-2021 Protect your Tesla Model S's rear trunk area from scratches, scuffs, and daily wear with the iFJF Rear Trunk Sill Outer Bumper Guard. Precision-engineered from premium stainless steel, this trim cover provides a perfect fit for 2012-2021 Tesla Model S vehicles while adding a sleek, modern accent to your cargo area. Whether you're loading groceries, luggage, sports gear, or work equipment, the trunk sill takes the most abuse. This durable guard absorbs impact and prevents unsightly paint damage that can diminish your Tesla's value over time. Vehicle Compatibility Make Model Year Range Body Style Tesla Model S 2012-2021 All variants Key Features Premium Stainless Steel: Brushed finish resists corrosion, fading, and peeling — maintains a showroom look for years Precision Fit: Laser-measured and CNC-cut to match the exact contours of your Tesla Model S's trunk sill Scratch & Scuff Protection: Creates a durable barrier between your cargo and the painted trunk sill surface Easy Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean, peel, and press into place in under 10 minutes Enhanced Appearance: Adds a premium, custom look that complements your Tesla's minimalist interior design OEM+ Style: Designed to look like a factory option rather than an aftermarket add-on Technical Specifications Specification Detail SKU FJ-TSL-S-HBWB-SI Material 304 Stainless Steel, Brushed Finish Thickness 0.8mm Adhesive 3M Automotive-Grade Double-Sided Tape (Pre-Applied) Installation Peel-and-Stick, No Drilling Required Installation Instructions Clean: Thoroughly clean the trunk sill area with isopropyl alcohol (included prep pad) to remove all wax, oil, and debris Dry Fit: Position the guard on the sill without removing the adhesive backing to verify alignment Heat (Optional): For best results in cold weather, warm the adhesive and the sill surface with a hair dryer for 30-60 seconds Peel: Remove the adhesive backing gradually, starting from one end Press: Starting from the center and working outward, apply firm, even pressure for 60 seconds across the entire surface Wait: Allow 24 hours for maximum adhesive bonding before exposing to water or car washes Why Protect Your Tesla's Trunk Sill? The trunk sill is one of the most vulnerable areas on any vehicle, and Tesla's painted sill surfaces are particularly susceptible to scratches. Every time you load or unload cargo — groceries, luggage, sports equipment, tools, or pet carriers — items drag across the painted sill. Over time, these micro-scratches accumulate, leaving your trunk opening looking worn and neglected. A stainless steel sill guard not only prevents this damage but also makes cleaning easier: simply wipe down the smooth metal surface instead of scrubbing scratched paint. Frequently Asked Questions Q: Will this fit my 2012-2021 Tesla Model S?A: Yes. This sill protector is precision-designed for the 2012-2021 Tesla Model S rear trunk opening. It follows the exact contour of your vehicle's trunk sill. Q: Does the adhesive damage the paint if I remove it later?A: No. The 3M automotive adhesive is designed to be removable without damaging factory paint when removed properly. Use a heat gun or hair dryer to warm the adhesive, then peel slowly. Any residue can be cleaned with adhesive remover. Q: Will the stainless steel rust or discolor over time?A: No. This guard is made from 304-grade stainless steel with a brushed finish, which is highly resistant to rust, corrosion, and discoloration — even in harsh weather conditions. Q: Can I install this in cold weather?A: For optimal adhesion, the surface temperature should be at least 60°F (15°C). In colder conditions, use a hair dryer to warm both the adhesive backing and the trunk sill surface before installation. Q: Does this interfere with the automatic trunk closing?A: No. The guard is thin (0.8mm) and follows the contour of the sill perfectly. It will not interfere with your Model S's power liftgate operation or trunk seal.

Read more less

Rear Trunk Outer Bumper Protector Trim Cover for Tesla Model 3 2017-2021 Protect your Tesla Model 3's rear trunk area from scratches, scuffs, and daily wear with the iFJF Rear Trunk Outer Bumper Protector. Precision-engineered from premium stainless steel, this trim cover provides a perfect fit for 2017-2021 Tesla Model 3 vehicles while adding a sleek, modern accent to your cargo area. Whether you're loading groceries, luggage, sports gear, or work equipment, the trunk sill takes the most abuse. This durable guard absorbs impact and prevents unsightly paint damage that can diminish your Tesla's value over time. Vehicle Compatibility Make Model Year Range Body Style Tesla Model 3 2017-2021 All variants Key Features Premium Stainless Steel: Brushed finish resists corrosion, fading, and peeling — maintains a showroom look for years Precision Fit: Laser-measured and CNC-cut to match the exact contours of your Tesla Model 3's trunk sill Scratch & Scuff Protection: Creates a durable barrier between your cargo and the painted trunk sill surface Easy Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean, peel, and press into place in under 10 minutes Enhanced Appearance: Adds a premium, custom look that complements your Tesla's minimalist interior design OEM+ Style: Designed to look like a factory option rather than an aftermarket add-on Technical Specifications Specification Detail SKU FJ-TSL-3-HBWB-SI Material 304 Stainless Steel, Brushed Finish Thickness 0.8mm Adhesive 3M Automotive-Grade Double-Sided Tape (Pre-Applied) Installation Peel-and-Stick, No Drilling Required Installation Instructions Clean: Thoroughly clean the trunk sill area with isopropyl alcohol (included prep pad) to remove all wax, oil, and debris Dry Fit: Position the guard on the sill without removing the adhesive backing to verify alignment Heat (Optional): For best results in cold weather, warm the adhesive and the sill surface with a hair dryer for 30-60 seconds Peel: Remove the adhesive backing gradually, starting from one end Press: Starting from the center and working outward, apply firm, even pressure for 60 seconds across the entire surface Wait: Allow 24 hours for maximum adhesive bonding before exposing to water or car washes Why Protect Your Tesla's Trunk Sill? The trunk sill is one of the most vulnerable areas on any vehicle, and Tesla's painted sill surfaces are particularly susceptible to scratches. Every time you load or unload cargo — groceries, luggage, sports equipment, tools, or pet carriers — items drag across the painted sill. Over time, these micro-scratches accumulate, leaving your trunk opening looking worn and neglected. A stainless steel sill guard not only prevents this damage but also makes cleaning easier: simply wipe down the smooth metal surface instead of scrubbing scratched paint. Frequently Asked Questions Q: Will this fit my 2017-2021 Tesla Model 3?A: Yes. This sill protector is precision-designed for the 2017-2021 Tesla Model 3 rear trunk opening. It follows the exact contour of your vehicle's trunk sill. Q: Does the adhesive damage the paint if I remove it later?A: No. The 3M automotive adhesive is designed to be removable without damaging factory paint when removed properly. Use a heat gun or hair dryer to warm the adhesive, then peel slowly. Any residue can be cleaned with adhesive remover. Q: Will the stainless steel rust or discolor over time?A: No. This guard is made from 304-grade stainless steel with a brushed finish, which is highly resistant to rust, corrosion, and discoloration — even in harsh weather conditions. Q: Can I install this in cold weather?A: For optimal adhesion, the surface temperature should be at least 60°F (15°C). In colder conditions, use a hair dryer to warm both the adhesive backing and the trunk sill surface before installation. Q: Does this interfere with the automatic trunk closing?A: No. The guard is thin (0.8mm) and follows the contour of the sill perfectly. It will not interfere with your Model 3's power liftgate operation or trunk seal.

Read more less

Rear Trunk Outer Bumper Guard Trim Cover for Tesla Model Y 2019-2021 Protect your Tesla Model Y's rear trunk area from scratches, scuffs, and daily wear with the iFJF Rear Trunk Outer Bumper Guard. Precision-engineered from premium stainless steel, this trim cover provides a perfect fit for 2019-2021 Tesla Model Y vehicles while adding a sleek, modern accent to your cargo area. Whether you're loading groceries, luggage, sports gear, or work equipment, the trunk sill takes the most abuse. This durable guard absorbs impact and prevents unsightly paint damage that can diminish your Tesla's value over time. Vehicle Compatibility Make Model Year Range Body Style Tesla Model Y 2019-2021 All variants Key Features Premium Stainless Steel: Brushed finish resists corrosion, fading, and peeling — maintains a showroom look for years Precision Fit: Laser-measured and CNC-cut to match the exact contours of your Tesla Model Y's trunk sill Scratch & Scuff Protection: Creates a durable barrier between your cargo and the painted trunk sill surface Easy Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean, peel, and press into place in under 10 minutes Enhanced Appearance: Adds a premium, custom look that complements your Tesla's minimalist interior design OEM+ Style: Designed to look like a factory option rather than an aftermarket add-on Technical Specifications Specification Detail SKU FJ-TSL-Y-HBWB-CK Material 304 Stainless Steel, Brushed Finish Thickness 0.8mm Adhesive 3M Automotive-Grade Double-Sided Tape (Pre-Applied) Installation Peel-and-Stick, No Drilling Required Installation Instructions Clean: Thoroughly clean the trunk sill area with isopropyl alcohol (included prep pad) to remove all wax, oil, and debris Dry Fit: Position the guard on the sill without removing the adhesive backing to verify alignment Heat (Optional): For best results in cold weather, warm the adhesive and the sill surface with a hair dryer for 30-60 seconds Peel: Remove the adhesive backing gradually, starting from one end Press: Starting from the center and working outward, apply firm, even pressure for 60 seconds across the entire surface Wait: Allow 24 hours for maximum adhesive bonding before exposing to water or car washes Why Protect Your Tesla's Trunk Sill? The trunk sill is one of the most vulnerable areas on any vehicle, and Tesla's painted sill surfaces are particularly susceptible to scratches. Every time you load or unload cargo — groceries, luggage, sports equipment, tools, or pet carriers — items drag across the painted sill. Over time, these micro-scratches accumulate, leaving your trunk opening looking worn and neglected. A stainless steel sill guard not only prevents this damage but also makes cleaning easier: simply wipe down the smooth metal surface instead of scrubbing scratched paint. Frequently Asked Questions Q: Will this fit my 2019-2021 Tesla Model Y?A: Yes. This sill protector is precision-designed for the 2019-2021 Tesla Model Y rear trunk opening. It follows the exact contour of your vehicle's trunk sill. Q: Does the adhesive damage the paint if I remove it later?A: No. The 3M automotive adhesive is designed to be removable without damaging factory paint when removed properly. Use a heat gun or hair dryer to warm the adhesive, then peel slowly. Any residue can be cleaned with adhesive remover. Q: Will the stainless steel rust or discolor over time?A: No. This guard is made from 304-grade stainless steel with a brushed finish, which is highly resistant to rust, corrosion, and discoloration — even in harsh weather conditions. Q: Can I install this in cold weather?A: For optimal adhesion, the surface temperature should be at least 60°F (15°C). In colder conditions, use a hair dryer to warm both the adhesive backing and the trunk sill surface before installation. Q: Does this interfere with the automatic trunk closing?A: No. The guard is thin (0.8mm) and follows the contour of the sill perfectly. It will not interfere with your Model Y's power liftgate operation or trunk seal.

Read more less

Rear Trunk Inner Sill Protector Trim Cover for Tesla Model 3 2017-2021 Protect your Tesla Model 3's rear trunk area from scratches, scuffs, and daily wear with the iFJF Rear Trunk Inner Sill Protector. Precision-engineered from premium stainless steel, this trim cover provides a perfect fit for 2017-2021 Tesla Model 3 vehicles while adding a sleek, modern accent to your cargo area. Whether you're loading groceries, luggage, sports gear, or work equipment, the trunk sill takes the most abuse. This durable guard absorbs impact and prevents unsightly paint damage that can diminish your Tesla's value over time. Vehicle Compatibility Make Model Year Range Body Style Tesla Model 3 2017-2021 All variants Key Features Premium Stainless Steel: Brushed finish resists corrosion, fading, and peeling — maintains a showroom look for years Precision Fit: Laser-measured and CNC-cut to match the exact contours of your Tesla Model 3's trunk sill Scratch & Scuff Protection: Creates a durable barrier between your cargo and the painted trunk sill surface Easy Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean, peel, and press into place in under 10 minutes Enhanced Appearance: Adds a premium, custom look that complements your Tesla's minimalist interior design OEM+ Style: Designed to look like a factory option rather than an aftermarket add-on Technical Specifications Specification Detail SKU FJ-TSL-3-HBNB-SI Material 304 Stainless Steel, Brushed Finish Thickness 0.8mm Adhesive 3M Automotive-Grade Double-Sided Tape (Pre-Applied) Installation Peel-and-Stick, No Drilling Required Installation Instructions Clean: Thoroughly clean the trunk sill area with isopropyl alcohol (included prep pad) to remove all wax, oil, and debris Dry Fit: Position the guard on the sill without removing the adhesive backing to verify alignment Heat (Optional): For best results in cold weather, warm the adhesive and the sill surface with a hair dryer for 30-60 seconds Peel: Remove the adhesive backing gradually, starting from one end Press: Starting from the center and working outward, apply firm, even pressure for 60 seconds across the entire surface Wait: Allow 24 hours for maximum adhesive bonding before exposing to water or car washes Why Protect Your Tesla's Trunk Sill? The trunk sill is one of the most vulnerable areas on any vehicle, and Tesla's painted sill surfaces are particularly susceptible to scratches. Every time you load or unload cargo — groceries, luggage, sports equipment, tools, or pet carriers — items drag across the painted sill. Over time, these micro-scratches accumulate, leaving your trunk opening looking worn and neglected. A stainless steel sill guard not only prevents this damage but also makes cleaning easier: simply wipe down the smooth metal surface instead of scrubbing scratched paint. Frequently Asked Questions Q: Will this fit my 2017-2021 Tesla Model 3?A: Yes. This sill protector is precision-designed for the 2017-2021 Tesla Model 3 rear trunk opening. It follows the exact contour of your vehicle's trunk sill. Q: Does the adhesive damage the paint if I remove it later?A: No. The 3M automotive adhesive is designed to be removable without damaging factory paint when removed properly. Use a heat gun or hair dryer to warm the adhesive, then peel slowly. Any residue can be cleaned with adhesive remover. Q: Will the stainless steel rust or discolor over time?A: No. This guard is made from 304-grade stainless steel with a brushed finish, which is highly resistant to rust, corrosion, and discoloration — even in harsh weather conditions. Q: Can I install this in cold weather?A: For optimal adhesion, the surface temperature should be at least 60°F (15°C). In colder conditions, use a hair dryer to warm both the adhesive backing and the trunk sill surface before installation. Q: Does this interfere with the automatic trunk closing?A: No. The guard is thin (0.8mm) and follows the contour of the sill perfectly. It will not interfere with your Model 3's power liftgate operation or trunk seal.

Read more less

Rear Trunk Inner Sill Plate Trim Cover for Tesla Model Y 2019-2021 Protect your Tesla Model Y's rear trunk area from scratches, scuffs, and daily wear with the iFJF Rear Trunk Inner Sill Plate. Precision-engineered from premium stainless steel, this trim cover provides a perfect fit for 2019-2021 Tesla Model Y vehicles while adding a sleek, modern accent to your cargo area. Whether you're loading groceries, luggage, sports gear, or work equipment, the trunk sill takes the most abuse. This durable guard absorbs impact and prevents unsightly paint damage that can diminish your Tesla's value over time. Vehicle Compatibility Make Model Year Range Body Style Tesla Model Y 2019-2021 All variants Key Features Premium Stainless Steel: Brushed finish resists corrosion, fading, and peeling — maintains a showroom look for years Precision Fit: Laser-measured and CNC-cut to match the exact contours of your Tesla Model Y's trunk sill Scratch & Scuff Protection: Creates a durable barrier between your cargo and the painted trunk sill surface Easy Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean, peel, and press into place in under 10 minutes Enhanced Appearance: Adds a premium, custom look that complements your Tesla's minimalist interior design OEM+ Style: Designed to look like a factory option rather than an aftermarket add-on Technical Specifications Specification Detail SKU FJ-TSL-Y-HBNB-CK Material 304 Stainless Steel, Brushed Finish Thickness 0.8mm Adhesive 3M Automotive-Grade Double-Sided Tape (Pre-Applied) Installation Peel-and-Stick, No Drilling Required Installation Instructions Clean: Thoroughly clean the trunk sill area with isopropyl alcohol (included prep pad) to remove all wax, oil, and debris Dry Fit: Position the guard on the sill without removing the adhesive backing to verify alignment Heat (Optional): For best results in cold weather, warm the adhesive and the sill surface with a hair dryer for 30-60 seconds Peel: Remove the adhesive backing gradually, starting from one end Press: Starting from the center and working outward, apply firm, even pressure for 60 seconds across the entire surface Wait: Allow 24 hours for maximum adhesive bonding before exposing to water or car washes Why Protect Your Tesla's Trunk Sill? The trunk sill is one of the most vulnerable areas on any vehicle, and Tesla's painted sill surfaces are particularly susceptible to scratches. Every time you load or unload cargo — groceries, luggage, sports equipment, tools, or pet carriers — items drag across the painted sill. Over time, these micro-scratches accumulate, leaving your trunk opening looking worn and neglected. A stainless steel sill guard not only prevents this damage but also makes cleaning easier: simply wipe down the smooth metal surface instead of scrubbing scratched paint. Frequently Asked Questions Q: Will this fit my 2019-2021 Tesla Model Y?A: Yes. This sill protector is precision-designed for the 2019-2021 Tesla Model Y rear trunk opening. It follows the exact contour of your vehicle's trunk sill. Q: Does the adhesive damage the paint if I remove it later?A: No. The 3M automotive adhesive is designed to be removable without damaging factory paint when removed properly. Use a heat gun or hair dryer to warm the adhesive, then peel slowly. Any residue can be cleaned with adhesive remover. Q: Will the stainless steel rust or discolor over time?A: No. This guard is made from 304-grade stainless steel with a brushed finish, which is highly resistant to rust, corrosion, and discoloration — even in harsh weather conditions. Q: Can I install this in cold weather?A: For optimal adhesion, the surface temperature should be at least 60°F (15°C). In colder conditions, use a hair dryer to warm both the adhesive backing and the trunk sill surface before installation. Q: Does this interfere with the automatic trunk closing?A: No. The guard is thin (0.8mm) and follows the contour of the sill perfectly. It will not interfere with your Model Y's power liftgate operation or trunk seal.

Read more less

Product Overview The iFJF Interior Rear Trunk Sill Plate is a must-have protection upgrade for your 2016-2021 Tesla Model X. The rear cargo sill is one of the most vulnerable areas on any SUV, subject to scratches from loading groceries, luggage, strollers, pets, and sports equipment. This precision-cut 304 stainless steel guard provides a durable, rust-proof barrier that keeps your Model X paint protected while adding a premium aesthetic touch to the cargo area. Key Features Premium 304 Stainless Steel: Corrosion-resistant, non-magnetic stainless steel that will not rust, peel, or discolor even after years of heavy use and car washes. Precision Laser-Cut for Model X: CNC laser-cut to match the exact rear trunk sill contour of 2016-2021 Tesla Model X. No trimming, no gaps, no modification needed. Brushed Satin Finish: The elegant brushed finish matches the Model X OEM interior trim while effectively hiding fingerprints and minor surface scratches. 3M VHB Adhesive Backing: Pre-applied industrial-grade 3M adhesive provides a permanent, rattle-free bond rated for extreme temperatures from -40 to 200 deg F. Ultra-Thin 0.8mm Profile: Sits nearly flush with the trunk surface and will not interfere with trunk mats, cargo liners, or the automatic liftgate operation. 5-Minute DIY Install: Clean, peel, stick, press. No drilling, no special tools. Includes alcohol prep pad for surface preparation. Compatibility Year Make Model Trim Position 2016-2021 Tesla Model X 60D/75D/90D/100D/P90D/P100D/Plaid Rear Cargo Trunk Sill Specifications Spec Detail Material 304 Stainless Steel Finish Brushed Satin Thickness 0.8mm Adhesive 3M Automotive VHB (Pre-applied) Coverage Rear Trunk Sill Only Installation Peel-and-Stick (No Drilling) Why Choose iFJF Your Tesla Model X is a significant investment. Protect it with iFJF sill plates manufactured in an ISO 9001 facility using genuine 304 stainless steel — not cheap chrome-plated steel that rusts after one winter. Every plate is individually inspected for dimensional accuracy and finish quality before packaging. Frequently Asked Questions Q: Is this the same as the front and rear set? A: This listing is for the rear trunk sill plate only. If you want both the front (frunk) and rear sill protectors, check our store for the complete front and rear set. Q: Will this fit the 2022+ Model X Refresh? A: While the rear trunk sill dimensions are very similar between pre-refresh and refresh Model X, this plate was CNC-scanned on a 2016-2021 Model X. Please verify with the product images. We offer a 30-day return if it does not fit your refresh model. Q: How do I prepare the surface before installation? A: Clean the trunk sill thoroughly with isopropyl alcohol (included prep pad). Ensure the surface is completely dry and free of wax, dirt, or oils. For best results, warm both the sill surface and the adhesive tape with a hair dryer before applying, especially in temperatures below 60 deg F. Q: Will this scratch over time from loading cargo? A: The brushed finish is specifically chosen because it hides surface-level scratches very well. Unlike mirror-polished plates that show every micro-scratch, the brushed texture maintains a clean appearance even with regular cargo loading. Q: Can I remove it without damaging the paint? A: Yes. Use a heat gun or hair dryer to warm the adhesive, then slowly peel from one corner. Any remaining adhesive residue can be safely removed with 3M adhesive remover or isopropyl alcohol without harming the factory paint. Related Products Model X Front & Rear Sill Guard Set — Complete protection

Read more less

Product Overview Keep your 2016-2021 Tesla Model X trunk sills looking showroom-fresh with the iFJF Interior Front and Rear Trunk Sill Guard Protector Set. Precision laser-cut from premium 304 stainless steel, these sill plates shield your Model X's vulnerable trunk entry points from scratches, scuffs, and wear caused by loading groceries, luggage, sports gear, and daily cargo. The brushed finish perfectly complements the Model X's luxurious interior while providing a durable, easy-to-clean protective surface. Key Features Premium 304 Stainless Steel: Rust-resistant, corrosion-proof material engineered to withstand daily abuse without fading, peeling, or cracking unlike plastic alternatives. Precision Laser-Cut Fitment: CNC laser-cut to match the exact contours of 2016-2021 Tesla Model X front and rear trunk sills with no trimming required. Complete Front & Rear Set: Includes both front trunk (frunk) and rear cargo area sill protectors for full coverage where your Model X needs it most. 3M Automotive-Grade Adhesive: Pre-applied heavy-duty adhesive tape ensures a secure, bubble-free bond that withstands extreme temperatures from -40 to 200 deg F. Brushed Finish: Matches the Model X OEM interior trim aesthetics while hiding minor scratches and fingerprints better than mirror-polished alternatives. 5-Minute Peel-and-Stick Install: No drilling, no special tools required. Just clean the surface, peel the backing, and press into place. Compatibility Year Make Model Trim Position 2016-2021 Tesla Model X All Trims (60D/75D/90D/100D/P90D/P100D/Plaid) Front & Rear Trunk Sill Specifications Spec Detail Material 304 Stainless Steel Finish Brushed Satin Adhesive 3M Automotive VHB Tape Thickness 0.8mm Set Includes Front Sill Guard (1pc) + Rear Sill Guard (1pc) Part Number TSL-X-QHNB-SI Why Choose iFJF iFJF Direct is a trusted supplier of premium aftermarket replacement parts and accessories, dedicated to delivering OEM-grade quality at an accessible price. Every sill guard is laser-inspected for dimensional accuracy before shipping. Backed by our 30-day satisfaction guarantee and responsive US-based customer support. Frequently Asked Questions Q: Will this fit my 2021 Tesla Model X Refresh? A: This sill guard set is designed for 2016-2021 Tesla Model X (pre-refresh / Raven). It fits all trims including 60D, 75D, 90D, 100D, P90D, P100D, and Plaid. For 2022+ refresh models, the trunk sill dimensions are identical. Please verify with the product images before ordering. Q: How do I install these sill guards? A: Installation is straightforward: (1) Thoroughly clean the trunk sill area with the included alcohol wipe. (2) Dry completely. (3) Test-fit the guard without peeling the adhesive. (4) Peel the 3M tape backing and carefully press the guard into place, applying firm pressure for 60 seconds. (5) Allow 24 hours for the adhesive to fully cure before washing the vehicle. Q: Will the adhesive damage my Model X paint if I remove it later? A: No. The 3M automotive-grade adhesive is designed to be removable without damaging OEM paint. Use a heat gun or hair dryer to warm the adhesive, then slowly peel. Any residue can be removed with isopropyl alcohol or automotive adhesive remover. Q: Does this cover the entire trunk sill area? A: Yes, the set includes both the front trunk (frunk) sill guard and the rear cargo trunk sill guard, providing complete protection for both loading areas where scratches most commonly occur. Q: Can I use these with aftermarket trunk mats? A: Yes, the sill guards are thin (0.8mm) and sit flush with the trunk surface. They will not interfere with most aftermarket trunk mats, cargo liners, or all-weather mats. Q: How does stainless steel compare to plastic sill protectors? A: Stainless steel is far more durable than ABS plastic alternatives. It will not crack in cold weather, will not warp from heat, and will not discolor over time. The brushed finish also hides scratches much better than glossy plastic. Installation Tips For best results, install in a warm environment (above 60 deg F). Use a heat gun to warm both the sill surface and the adhesive tape before pressing down. Apply firm, even pressure across the entire guard for at least 60 seconds. Allow 24 hours of cure time before exposing to moisture or car washes. Related Products Model X Rear Trunk Sill Plate — Rear protection only Model 3 Jack Pad Adapter — Protect your undercarriage during service

Read more less

Product Overview Protect your Tesla Model Y's rear trunk sill from scratches, scuffs, and cargo damage with the iFJF Stainless Steel Trunk Sill Plate set. This 2-piece kit covers both the interior and exterior sill areas — the most vulnerable contact points when loading groceries, luggage, sports gear, or pets. Precision-cut for a perfect OEM+ fit. Key Features 2-Piece Complete Protection: Includes both interior and exterior sill plates — covers the full loading area threshold. 304 Stainless Steel: Premium brushed stainless steel with black trim finish — resists scratches, rust, and UV fading. Precision Laser-Cut: CNC laser-cut to follow the exact contours of the Model Y trunk sill. No gaps, no overhang. Peel-and-Stick Install: Pre-applied 3M automotive-grade adhesive backing. Clean the surface, peel, align, and press — done in 5 minutes. OEM+ Aesthetic: Black finish with stainless steel accent seamlessly matches Model Y's premium interior design language. Compatibility Brand Model/Part Years/Notes Tesla Model Y 2019-2024 All Trims Tesla Model Y Long Range / Performance / Standard Tesla Model Y 5-Seat Configuration Technical Specifications Specification Value Material 304 Brushed Stainless Steel Finish Black with Stainless Accent Pieces 2 (Interior + Exterior) Adhesive 3M Automotive-Grade VHB Installation Peel-and-Stick, No Drilling Fitment Precision Laser-Cut for Model Y Why Choose iFJF? Prevent Permanent Damage: Once the trunk sill paint is scratched through to bare metal, rust can start. Protect it before it's too late. Maintain Resale Value: A clean, protected trunk area impresses buyers and preserves your Model Y's value. 5-Minute Install: No tools, no drilling, no permanent modification. Just clean, peel, and stick. Designed for Model Y: Not a universal trim piece — laser-cut specifically for Model Y trunk contours. Installation Thoroughly clean the trunk sill area with isopropyl alcohol. Surface must be completely free of dirt, wax, and oils. Test-fit both plates before removing the adhesive backing. Note alignment markers. Peel a corner of the backing and align the plate carefully — the adhesive bonds instantly. Press firmly along the entire surface, applying even pressure for 60 seconds. Avoid washing the car or exposing to water for 24 hours to allow full adhesive cure. Frequently Asked Questions Q: Will this fit a 2023 Model Y?A: Yes. This sill plate set fits all Model Y model years from 2019 through 2024, including 2023 models. The trunk sill dimensions have not changed.Q: Does this work with the 7-seat configuration?A: This kit is designed for the 5-seat Model Y. The 7-seat third row changes the trunk sill profile slightly and may not provide a perfect fit.Q: Will the adhesive damage my paint when removed?A: 3M VHB automotive adhesive is designed for permanent exterior use. If you ever need to remove it, use a heat gun or hair dryer to soften the adhesive, then dental floss to slice through. Any residue cleans up with adhesive remover.Q: Is this real stainless steel or plastic?A: Real 304-grade brushed stainless steel — not plastic or chrome-plated ABS. It's durable, rust-proof, and has a premium weighty feel.Q: Does the black finish scratch easily?A: The brushed finish naturally hides minor scratches. For severe abuse, the underlying stainless steel won't rust even if the black coating is compromised. Related Products Aluminum Trunk Grocery Bag Hook for Model 3 Center Console Mats for Model 3 7PC Related Blog Posts Golf Cart Wheel Covers Installation Guide

Read more less

Product Overview Protect your Tesla Model X's front trunk sill from scratches, scuffs, and cargo damage with this precision-engineered stainless steel sill guard. The Model X frunk sees heavy use — groceries, luggage, sports gear — and the painted sill area is extremely vulnerable to scratches. This guard provides a durable, easy-to-clean protective layer that looks like factory equipment. Laser-cut to exact Model X (2016-2025) frunk sill contours for a perfect OEM fit. The premium brushed stainless steel finish complements the Model X's modern interior aesthetic. Key Features Precision Laser-Cut — Exact fit for 2016-2025 Tesla Model X front trunk sill contours Brushed Stainless Steel — Premium finish resists scratches, fingerprints, and corrosion 3M Automotive-Grade Adhesive — Strong bond, won't damage paint if removed properly Easy DIY Install — Peel-and-stick application; install in 5 minutes Front Trunk Only — Protects the high-wear frunk loading area Compatibility Vehicle Years Tesla Model X 2016–2025 (All Trims: 75D, 100D, P100D, Long Range, Plaid) Specifications Specification Value Material Premium Stainless Steel (Brushed Finish) Installation Type 3M Adhesive (Peel & Stick) Fitment Custom Contour (Model X Specific) Quantity 1 Piece (Front Trunk Sill) Frequently Asked Questions Q: Will this fit my 2024 Model X?A: Yes. The front trunk sill dimensions have remained unchanged since the Model X launched in 2016 through the 2025 refresh. Q: Does it come with a rear trunk guard too?A: This listing is for the front trunk (frunk) sill guard only. The frunk sill is the highest-wear area since it's the primary cargo loading zone. Q: Will the adhesive damage my paint if I remove it?A: When removed correctly (using a heat gun or hair dryer to warm the adhesive), it comes off cleanly without paint damage. 3M automotive-grade adhesive is designed for this application. Q: How do I install it?A: Clean the sill surface with the included alcohol prep pad, let dry, peel the adhesive backing, align carefully, and press firmly for 60 seconds. Avoid washing the area for 24 hours after installation for maximum bond strength. Related Products Tesla Model 3 Cabin Air Filter Browse All Tesla Accessories Related Blog Posts Tesla Model X: Best Interior & Exterior Protection Accessories

Read more less

Product Overview Protect your Tesla Model Y's door sills from daily wear with iFJF Premium Stainless Steel Door Sill Protectors. The Model Y's taller ride height means more scuffing as passengers step up and into the vehicle — this 8-piece set provides complete coverage for all entry points. Dual-layered design combines brushed 304 stainless steel for durability with a sleek silver finish that perfectly complements the Model Y's modern interior. Key Features Custom Fit for Model Y 5-Seater: Precision laser-cut to match 2019-2021 Tesla Model Y door sill contours exactly — covers the full painted sill area for complete scratch and scuff protection. 8-Piece Complete Set: Includes protectors for all four passenger doors plus the rear cargo sill area — full coverage for every high-wear entry point on your Model Y. Brushed 304 Stainless Steel: Premium stainless steel resists corrosion, UV damage, and daily wear. Won't yellow, crack, or peel like film-based protectors that degrade over time. Peel-and-Stick Installation: Pre-applied automotive-grade 3M adhesive backing — clean, peel, press. No tools or permanent modification required. Complete installation in under 15 minutes. Enhanced Interior Appearance: The brushed silver finish adds a premium, factory-upgrade look that matches Tesla's aluminum interior accents on the dashboard and door panels. Compatibility Make Model Years Tesla Model Y 5-Seater (Long Range, Performance) 2019-2021 Note: Designed for the 5-seat configuration. 7-seat Model Y has a slightly different rear sill layout. Not compatible with 2022+ Model Y interior refresh. Specifications Specification Details Material 304 Brushed Stainless Steel Color Silver (Brushed Finish) Pieces 8 (Front x2, Rear x2, Cargo Sill x4) Thickness Approximately 0.8mm Installation Peel-and-Stick — 3M Automotive Adhesive Why Choose iFJF The Model Y's door sills take a beating — taller ride height means every passenger scrapes their shoes across the painted sill on entry and exit. These stainless steel protectors are a one-time upgrade that preserves your vehicle's resale value by preventing the most common cosmetic damage on Model Y interiors. Unlike clear film, they actually enhance the look while providing superior protection. 90-day satisfaction guarantee. Frequently Asked Questions Q: Will these fit a 7-seat Model Y?A: These are designed for the 5-seat Model Y configuration. The 7-seat variant has a modified rear sill area due to the third-row seat mechanism. Verify your seat configuration before ordering. Q: How long does the adhesive last?A: The 3M automotive-grade adhesive is rated for extreme temperatures (-40F to 200F) and is designed to last the life of the vehicle. Proper surface preparation with isopropyl alcohol is the key to maximum adhesion. Q: Will the cargo sill protectors interfere with the trunk floor?A: No. The cargo sill pieces are positioned on the painted metal sill, not the trunk floor panel. The trunk floor panel and under-floor storage compartment operate completely normally with the protectors installed. Q: Can I install these in cold weather?A: For best adhesion, install at temperatures above 60F (15C). If installing in cold weather, warm the door sills with a hair dryer first and keep the vehicle garaged overnight after installation for the adhesive to fully cure. Related Products Explore more from our full catalog. iFJF Direct offers thousands of quality replacement parts, tools, and accessories for your vehicle.

Read more less

Product Overview Protect your Tesla Model 3's door sills from daily wear with iFJF Premium Stainless Steel Door Sill Protectors. Every entry and exit scrapes shoes across the painted door sill — leaving scratches, scuffs, and eventually bare metal. This 6-piece set covers front and rear door sills with durable, brushed 304 stainless steel that looks like a factory premium upgrade. The silver finish perfectly complements the Model 3's modern interior aesthetic. Key Features Custom Fit for Model 3: Laser-cut to precisely match 2017-2021 Tesla Model 3 door sill contours — covers the full painted sill area most vulnerable to shoe scuffs and scratches. 6-Piece Complete Set: Includes protectors for all four doors (front left + right, rear left + right) plus rear bumper sill guards — complete coverage in one kit. Brushed 304 Stainless Steel: Premium stainless steel with a brushed silver finish that resists corrosion, won't yellow or peel like film protectors, and matches Tesla's aluminum interior trim perfectly. Peel-and-Stick Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean the surface with the included alcohol wipe, peel the liner, and press firmly. No tools or permanent modification needed. Hard Surface Protection: Stainless steel surface deflects shoe soles, heels, and cargo that would otherwise scratch the factory painted door sill. Keeps your Model 3 looking showroom-fresh for years. Compatibility Make Model Years Tesla Model 3 (Standard Range, Long Range, Performance) 2017-2021 Note: Not compatible with 2022+ Model 3 (refreshed interior with different sill dimensions) or Model Y. Specifications Specification Details Material 304 Brushed Stainless Steel Color Silver (Brushed Finish) Pieces 6 (Front Doors x2, Rear Doors x2, Trunk Sill x2) Thickness Approximately 0.8mm Installation Peel-and-Stick — 3M Automotive Adhesive Why Choose iFJF Your Model 3's painted door sills are one of the highest-wear areas that most owners overlook until the damage is done. Unlike clear film protectors that yellow and peel, stainless steel sill guards provide permanent protection with a premium look that actually enhances your interior. The 3M adhesive is strong enough to stay put through automatic car washes and extreme temperatures, yet removable without residue if needed. 90-day satisfaction guarantee. Frequently Asked Questions Q: Will these fit my 2022 Tesla Model 3?A: No. The 2022+ Model 3 received an interior refresh with updated door sill dimensions. These protectors are specifically designed for 2017-2021 Model 3. Verify your model year before ordering. Q: How do I prepare the surface for installation?A: Clean the door sill thoroughly with the included isopropyl alcohol wipe to remove all dirt, wax, and oils. The surface must be completely clean and dry for the 3M adhesive to bond properly. Install at room temperature (above 60F/15C) for best adhesion. Q: Can these be removed without damaging the paint?A: Yes. Use a heat gun or hair dryer to warm the adhesive, then slowly peel from one corner. Any remaining adhesive residue removes easily with Goo Gone or adhesive remover without paint damage. Q: Do these interfere with the door seal or closing?A: No. At approximately 0.8mm thickness, the protectors fit within the door sill recess without interfering with the rubber door seal or the door closing operation in any way. Related Products Explore more from our full catalog. iFJF Direct offers thousands of quality replacement parts, tools, and accessories for your vehicle.

Read more less

Product Overview Enjoy a quieter, more refined driving experience with the iFJF Wind Noise Reduction Seal Kit Version 2 for Tesla Model 3. This upgraded seal kit targets the windshield and roof gaps where wind noise enters the cabin — a common complaint among Model 3 owners at highway speeds. Self-adhesive installation takes under 30 minutes with no tools required, and the results are immediately noticeable. Key Features Version 2 Design: Improved rubber compound and profile for better sealing and longer durability compared to earlier versions. Targeted Noise Reduction: Seals the windshield-to-roof gap, A-pillar channels, and roof glass perimeter — the primary sources of wind noise in the Model 3. Simple Peel-and-Stick Install: Pre-cut lengths with 3M automotive-grade adhesive backing — just clean the surface, peel, and press. No tools needed. OEM-Look Finish: Low-profile black EPDM rubber blends seamlessly with the Tesla's glass roof and trim — virtually invisible after installation. All-Weather Durability: UV-resistant and temperature-rated from -40°F to 250°F — won't crack, shrink, or peel in extreme conditions. Compatibility Vehicle Years Trim Levels Tesla Model 3 2017-2023 Standard, Long Range, Performance Specifications Spec Detail Material EPDM Rubber (Automotive Grade) Adhesive 3M VHB Acrylic Foam Tape Temperature Range -40°F to 250°F (-40°C to 121°C) Profile Low-Profile D-Shape (Version 2) Installation Self-Adhesive, No Tools Required Installation Tips Clean Thoroughly: Wipe all application surfaces with the included alcohol prep pads — any dirt or wax will prevent proper adhesion. Work in 70°F+ Temperatures: The adhesive bonds best above 70°F. If installing in cold weather, warm the surface with a hair dryer first. Apply Firm Pressure: Press firmly along the entire length of the seal after application — use a roller if available. Avoid Car Washes: Wait 24 hours before washing the vehicle or exposing to rain to allow the adhesive to fully cure. Frequently Asked Questions Q: How much noise reduction can I expect?A: Most Model 3 owners report a 3-5 dB reduction in wind noise at highway speeds (65-75 mph) — a noticeable improvement that makes phone calls and music much clearer. Q: Will this affect my glass roof's appearance?A: The seal is low-profile and black, designed to blend with the existing trim and glass. It's barely visible and does not obstruct the panoramic roof view. Q: Can I remove it later without damage?A: Yes — the seal can be removed by peeling it off carefully. Any remaining adhesive residue can be cleaned with isopropyl alcohol without damaging the paint or glass. Q: Does this fit the 2024+ Model 3 Highland?A: This Version 2 kit is designed for 2017-2023 Model 3. The 2024 Highland refresh has different panel gaps and may not fit properly. Q: Is this the same as the OEM Tesla seal?A: This is an aftermarket upgrade designed to supplement the factory seals. It addresses gaps that the OEM seals don't fully cover, providing additional wind noise reduction.

Read more less

Product Overview Transform your Tesla Model 3 driving experience with the iFJF Roof Seal Kit. Engineered from 100% pure silica gel, this precision-cut weather seal eliminates wind noise, rattles, and drafts by filling the gap between your windshield and roof panel. Whether cruising on the highway or navigating city streets, enjoy a quieter, more refined cabin. Key Features Premium Silica Gel: 100% pure silica gel offers exceptional elasticity, temperature resistance (-40 to 250F), and UV stability. Noise Reduction: Fills critical roof-to-windshield gaps, reducing wind whistle and vibration-related rattles at highway speeds. Precision Fit for Model 3: Laser-measured and precision-cut for direct fitment on all Tesla Model 3 (2017-2021). Press into place no adhesive needed. Weather & UV Resistant: Withstands extreme temperatures, rain, snow, and car wash chemicals without degradation. Easy DIY Install: Clean the channel, align, press in. Under 10 minutes with zero mechanical experience needed. Compatibility Vehicle Year Trim Tesla Model 3 2017-2021 Standard Range / Long Range / Performance Specifications Material 100% Pure Silica Gel Color Black Temperature Range -40F to +250F UV Resistance Yes UV-stabilized Installation Press-in, no adhesive needed Package 1 x Roof Windshield Seal Strip Installation Guide Clean the channel with microfiber and isopropyl alcohol. Align the seal starting from one corner. Press firmly into the gap working across the entire width. Trim excess length for perfect finish. Test drive and enjoy the quieter cabin! Frequently Asked Questions Q: Will this fit my 2021 Tesla Model 3?A: Yes! Compatible with all Tesla Model 3 vehicles from 2017-2021, including Standard Range Plus, Long Range, and Performance. Q: Does it require adhesive or special tools?A: No press-in installation. Clean, align, press. No adhesive, no tools, no drilling. Q: Will it withstand car washes and extreme weather?A: Absolutely. UV-stabilized silica gel rated for -40F to +250F, resistant to car washes, snow, rain, and sun. Q: How much noise reduction can I expect?A: Most users report 30-50% reduction in wind noise and rattles at highway speeds. Results vary by existing gap size. Related Products You May Need iFJF Rear Trunk Inner Sill Plate Trim Cover for Model Y 2019-2021 Stainless Stee iFJF Rear Trunk Outer Bumper Guard Trim Cover for Model Y 2019-2021 Stainless St iFJF Rear Trunk Inner Sill Protector for Model 3 2017-2021 Cover Trim Stainless Related Guides & Resources Tesla Model 3 Accessories Must Have Upgrades How To Reduce Wind Noise In Your Tesla

Read more less

Product Overview Breathe cleaner air in your Tesla Model 3 with this premium cabin air filter featuring activated carbon and soda-infused media for superior odor, allergen, and particulate filtration. A direct replacement for the factory filter, this upgrade filters out pollen, dust, mold spores, exhaust fumes, and VOCs — keeping your cabin air fresh and clean for you and your passengers. Tesla recommends replacing the cabin air filter every 2 years (or every 1 year in high-pollution areas). A clogged filter reduces HVAC efficiency and can cause musty odors from the AC system. Our activated carbon upgrade outperforms the stock paper filter at a fraction of Tesla's service center price. Key Features Activated Carbon Layer — Adsorbs VOCs, exhaust fumes, ozone, and industrial odors Soda-Infused Media — Enhanced acid-gas filtration for urban environments HEPA-Grade Efficiency — Filters 99.97% of particles ≥0.3 microns Perfect Fit — Precision-cut to Tesla Model 3 filter housing dimensions (2017-2025) Easy DIY Install — Tesla-friendly design; installs in 10 minutes with basic tools Compatibility Vehicle Years Tesla Model 3 2017–2025 (All Trims: SR+, LR, Performance) Specifications Specification Value Filter Media Activated Carbon + Soda-Infused Non-Woven Filtration Efficiency ≥99.97% @ 0.3 microns Filter Type Cabin Air Filter (Particle + Gas Combination) Replacement Interval Every 2 Years or 15,000 Miles Signs Your Cabin Air Filter Needs Replacement Musty or sour smell from AC vents Reduced airflow from HVAC system Excessive window fogging in humid weather Increased allergy symptoms while driving Visible debris or discoloration on filter inspection Frequently Asked Questions Q: How do I replace the Model 3 cabin air filter?A: The Model 3 filter is accessed from inside the cabin (passenger footwell area). Remove the footwell cover panel, release the filter housing door, slide out the old filter, and insert the new one ensuring correct airflow direction (arrow on filter). 10-15 minute DIY job. Q: How often should I replace the cabin air filter?A: Tesla recommends every 2 years. If you drive in heavy traffic, areas with wildfires, or high-pollen seasons, consider replacing annually for best air quality. Q: Does this fit the 2024 Model 3 Highland?A: Yes. The cabin air filter dimensions remained unchanged through all Model 3 iterations including the 2024 Highland refresh. Q: Is this better than the OEM Tesla filter?A: Our filter uses activated carbon + soda-infused media which provides superior gas/odor filtration compared to the standard OE paper filter. Same fit, better filtration. Related Products Tesla Model X Trunk Sill Guard Browse All Tesla Accessories Related Blog Posts Tesla Model 3 DIY Maintenance Guide

Read more less