RV Slide-Out Controller V-Sync II Dual Synchronous Velocity — 13398-DO Replacement

Description

Product Overview

Replacement V-Sync II dual synchronous velocity slide-out controller for RV in-wall slide systems. Replaces part #13398-DO and is compatible with Lippert (LCI) Schwintek in-wall slide mechanisms. Independent dual-channel motor control for smooth, synchronized slide operation — no binding, no racking. Plug-and-play with OEM-compatible wiring harness connector.

Key Features

  • Dual Synchronous Control — Independent dual-channel motor control ensures both sides move in perfect sync — no binding or racking.
  • Plug-and-Play — OEM-compatible wiring harness — unplug old, plug in new. No splicing, no wiring, no modifications.
  • In-Wall Slide Compatible — Specifically for Schwintek/Lippert in-wall slide-out systems on modern travel trailers, 5th wheels, and motorhomes.
  • Built-In Protection — Onboard overload, short circuit, and reverse polarity protection safeguards expensive slide motors and wiring.
  • Velocity & Position Sensing — Hall-effect sensor feedback monitors motor speed and position for precise control throughout slide travel.

Compatibility

Make Model Year Range Notes
Lippert (LCI) Schwintek In-Wall Slide 2012–2023 All Sizes — Dual Motor
Goshen In-Wall Slide Systems 2014–2023 Dual Motor Config
Various OEMs 13398-DO Compatible All Years Dual Synchronous

Specifications

Specification Value
Part Number 13398-DO (Replacement)
System V-Sync II Dual Synchronous Velocity
Motor Channels 2 (Independent Control)
Input Voltage 12V DC Nominal
Protection Overload / Short Circuit / Reverse Polarity

Frequently Asked Questions

Q: How do I know if this fits?
A: Check your existing controller for part #13398-DO. Compatible with Lippert/Schwintek dual-motor systems. Contact us with your slide model if unsure.

Q: Is it plug-and-play?
A: Yes. OEM-compatible connectors — unplug old, plug in new. No wiring or splicing needed.

Q: My slide moves unevenly — will this fix it?
A: If your current controller has failed (one side moves, other doesn't), this replacement restores proper dual-synchronous operation.

Q: What causes controller failure?
A: Water intrusion, voltage spikes, motor overload, and general age. Exterior compartment controllers are most vulnerable.

Q: Can I install this myself?
A: Yes — basic DIY. Disconnect battery first. Most installations take under 30 minutes with just a screwdriver.

Related Products

RV Slide-Out Controller V-Sync II Dual Synchronous Velocity — 13398-DO Replacement

Product form

SKU: FJ-JP-X-BC08

$99.99

    • Shipped today? Order within: Nov 20, 2026 17:00:00 +0800

    Description

    Product Overview

    Replacement V-Sync II dual synchronous velocity slide-out controller for RV in-wall slide systems. Replaces part #13398-DO and is compatible with Lippert (LCI) Schwintek in-wall slide mechanisms. Independent dual-channel motor control for smooth, synchronized slide operation — no binding, no racking. Plug-and-play with OEM-compatible wiring harness connector.

    Key Features

    • Dual Synchronous Control — Independent dual-channel motor control ensures both sides move in perfect sync — no binding or racking.
    • Plug-and-Play — OEM-compatible wiring harness — unplug old, plug in new. No splicing, no wiring, no modifications.
    • In-Wall Slide Compatible — Specifically for Schwintek/Lippert in-wall slide-out systems on modern travel trailers, 5th wheels, and motorhomes.
    • Built-In Protection — Onboard overload, short circuit, and reverse polarity protection safeguards expensive slide motors and wiring.
    • Velocity & Position Sensing — Hall-effect sensor feedback monitors motor speed and position for precise control throughout slide travel.

    Compatibility

    Make Model Year Range Notes
    Lippert (LCI) Schwintek In-Wall Slide 2012–2023 All Sizes — Dual Motor
    Goshen In-Wall Slide Systems 2014–2023 Dual Motor Config
    Various OEMs 13398-DO Compatible All Years Dual Synchronous

    Specifications

    Specification Value
    Part Number 13398-DO (Replacement)
    System V-Sync II Dual Synchronous Velocity
    Motor Channels 2 (Independent Control)
    Input Voltage 12V DC Nominal
    Protection Overload / Short Circuit / Reverse Polarity

    Frequently Asked Questions

    Q: How do I know if this fits?
    A: Check your existing controller for part #13398-DO. Compatible with Lippert/Schwintek dual-motor systems. Contact us with your slide model if unsure.

    Q: Is it plug-and-play?
    A: Yes. OEM-compatible connectors — unplug old, plug in new. No wiring or splicing needed.

    Q: My slide moves unevenly — will this fix it?
    A: If your current controller has failed (one side moves, other doesn't), this replacement restores proper dual-synchronous operation.

    Q: What causes controller failure?
    A: Water intrusion, voltage spikes, motor overload, and general age. Exterior compartment controllers are most vulnerable.

    Q: Can I install this myself?
    A: Yes — basic DIY. Disconnect battery first. Most installations take under 30 minutes with just a screwdriver.

    Related Products

    Recently viewed products

    © 2026 iFJF Direct | Sitemap

      • American Express
      • Diners Club
      • Discover
      • Maestro
      • Mastercard
      • PayPal
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account