FL2051S Oil Filter for F250 F350 F450 F550 6.7L Powerstroke 2011-2020 Engine Replace BC3Z-6731-B BC3Q-6714-CA

• Fits 2011-2020 F250-F550 Super Duty Trucks w/ 6.7L Powerstroke Diesel V8 Engine.
• Interchange Part Number: FL2051S, BC3Z-6731-B, PF67, B7379, P502503, PH10890, LF17494, BC3Q-6714-CA, 57151.
• Pressure relief valves help maintain the supply of oil to the engine under extreme cold conditions or if the filter gets clogged.
• Steel cases are "ironed" for a precise fit, fluted to ease removal and painted. Large media area provides optimal capacity and efficiency,Perforated Steel Center Tubes withstand pressure surges and prevent leakage.

Installation instructions

1.Use proper protective gear.Drain the remaining oil.Used motor oil should not come in contact with bare skin.

2.Place a drain pan under the oil filter and unscrew the filter.

3.Clean mounting base, making sure the O-ring from the old filter is not stuck to the filter mount.

4.Apply film of clean oil to filter gasket. Do not use grease.

5.Screw new filter on until gasket reaches base contact.Then tighten.

6.Check owner’s manual for correct oil specification, viscosity and amount.

7.Add oil to ‘full’ on dipstick. Idle engine for 5 minutes and check for leaks.

8.Shut off engine and recheck oil level after 5 minutes and top off as necessary.