Description
Pool Pipe Support with Plunger Valve — 1.25" & 1.5" Dual-Size for Above Ground Pools
Product Overview
The iFJF Pool Pipe Support with Plunger Valve solves two common above-ground pool problems in one integrated unit. First, the sturdy clamp bracket supports your filter hoses, preventing the sagging and kinking that restricts water flow and strains your pump. Second, the integrated plunger valve gives you instant shut-off control — close the valve to clean your filter basket, swap hoses, or perform maintenance without draining the pool or getting drenched.
Designed with dual-size compatibility, this support fits both standard 1.25-inch and 1.5-inch pool hoses used by Intex, Bestway, Coleman, and most other above-ground pool brands. The UV-stabilized ABS construction withstands direct sunlight, chlorine, and pool chemicals without cracking or fading. A single unit handles one hose connection — purchase two for a complete inlet/outlet setup.
Key Features
-
Dual-Size Compatibility: Fits both 1.25-inch and 1.5-inch pool hoses — the two most common sizes for above-ground pools up to 18 feet.
-
Integrated Plunger Valve: Push-pull valve provides instant water shut-off for filter maintenance, hose changes, or winterizing without tools.
-
Hose Support Bracket: Prevents hose sag and kinking that reduces water flow — keeps your pump running efficiently.
-
UV-Stabilized ABS: Heavy-duty construction resists sun damage, chlorine, and temperature extremes for multi-season durability.
-
Clamp-On Installation: Attaches directly to your pool's metal frame tubing — no drilling or permanent modification required.
-
Universal Fit: Compatible with Intex, Bestway, Coleman, Summer Waves, and most other above-ground pool brands.
Compatibility
| Pool Brand |
Hose Size |
Frame Type |
| Intex |
1.25" & 1.5" |
Metal Frame / Easy Set |
| Bestway |
1.25" & 1.5" |
Steel Pro / Power Steel |
| Coleman |
1.25" & 1.5" |
Power Steel Frame |
| Summer Waves |
1.25" & 1.5" |
Metal Frame |
Specifications
| Specification |
Value |
| Compatible Hose Sizes |
1.25 inch & 1.5 inch (ID) |
| Material |
UV-Stabilized ABS Plastic |
| Valve Type |
Push-Pull Plunger (On/Off) |
| Mounting |
Clamp-On Frame Bracket |
| Quantity |
1 Pack (Single Hose Support + Valve) |
Frequently Asked Questions
Q: Do I need one or two of these for my pool?
A: Most above-ground pools have two hoses (inlet from pump and outlet to pool). For full shut-off control on both lines, purchase two units. One unit works for single-hose setups or if you only need support on one side.
Q: Will this fit my Intex 12ft pool?
A: Yes. The dual-size design fits both the 1.25" hoses common on smaller Intex pools (8-12 ft) and the 1.5" hoses on larger models (14-18 ft).
Q: Can I leave this installed over winter?
A: We recommend removing and storing indoor for winter. While the ABS material is durable, freeze-thaw cycles with trapped water can stress the valve mechanism. Open the valve fully before winter storage.
Q: Does the plunger valve leak?
A: The plunger valve uses O-ring seals for a watertight shut-off when fully pushed in. For best results, ensure the O-ring is clean and lubricated with silicone grease at the start of each season.
Q: How do I install the bracket on my pool frame?
A: The clamp bracket opens and wraps around your pool's metal frame tube. Tighten the thumbscrew until snug — do not overtighten, as this can stress the plastic bracket. Position near the hose connection point for best support.
