Description
1.25-Inch Pool Inlet Jet Nozzle, Hose Holder & Strainer Grid Kit
The iFJF Complete Pool Inlet Kit includes everything you need to connect your filtration system to an above ground swimming pool. With the inlet jet nozzle, hose holder, and strainer grid, this kit replaces worn or missing pool inlet components in one convenient package.
What's Included
-
Inlet Jet Nozzle: Directs filtered water back into the pool with an adjustable eye for optimizing circulation patterns
-
Hose Holder/Adapter: Secures the 1.25-inch filter hose to the pool wall fitting for a leak-free connection
-
Strainer Grid: Prevents large debris from entering the filtration system and protects the pump impeller
Key Features
-
Standard 1.25-Inch Fitment: Compatible with most above ground pool filtration systems including Intex, Bestway, and Coleman
-
Adjustable Jet Direction: Aim the water flow to optimize circulation and improve skimming efficiency
-
Corrosion-Resistant Materials: UV-stabilized ABS plastic withstands pool chemicals and sun exposure
-
Leak-Free Connection: Precision-molded threads and gasket surfaces ensure a watertight seal
-
Easy DIY Installation: No special tools needed — typical installation takes under 15 minutes
Why Replace Your Pool Inlet Fittings?
Over time, pool inlet components degrade from constant exposure to chlorinated water and UV rays. A worn jet nozzle can't direct water effectively, leading to poor circulation and dead spots where algae can grow. A cracked hose holder causes leaks that reduce pump efficiency. And a missing strainer grid allows debris into your pump — potentially damaging the impeller. This kit addresses all three issues at once.
Installation Steps
- Turn off the pool pump and close any existing valves
- Remove the old inlet components from the pool wall
- Clean the wall fitting threads with a soft brush
- Install the new strainer grid on the inside of the pool wall
- Thread the jet nozzle into the inside wall fitting
- Attach the hose holder to the outside wall fitting
- Connect your filter hose and tighten the hose clamp
- Open valves and restart the pump — check for leaks
FAQ
Q: Will this fit my Intex above ground pool?
A: Yes. This 1.25-inch inlet jet kit is designed as a direct replacement for standard Intex and Bestway above ground pool filtration fittings.
Q: What's included in the kit?
A: The kit includes one inlet jet nozzle, one hose holder/adapter, and one strainer grid — everything for a complete inlet connection.
Q: How do I know if I need 1.25" or 1.5" fittings?
A: Measure the outside diameter of your existing pool hose or fitting. Most smaller above ground pools (up to 15 feet) use 1.25-inch fittings, while larger pools typically use 1.5-inch.
Q: Is this compatible with saltwater systems?
A: Yes, the fittings are made from corrosion-resistant ABS plastic suitable for saltwater and chlorine pools.
Related Products
📚 Related Guides & Articles
