Description
11872 Dual Split Hose Plunger Valve Kit with 1.25" Inlet Nozzle & Outlet Strainer
The iFJF Complete Plunger Valve Kit bundles a dual split hose plunger valve (11872) with a 1.25-inch inlet nozzle and outlet strainer — everything you need for a full pool-to-pump connection setup. Designed as a direct replacement for Intex and similar above ground pool filtration systems.
What's Included
-
11872 Dual Split Hose Plunger Valve: Controls water flow between the pool and filter pump with a simple push-pull plunger mechanism
-
1.25" Inlet Jet Nozzle: Adjustable direction eye for optimizing water circulation
-
1.25" Outlet Strainer Grid: Prevents debris from entering the pump and damaging the impeller
-
O-Ring Seals: Included for all connection points — ensures watertight seal
Key Features
-
All-in-One Solution: Valve + nozzle + strainer in one kit — no hunting for individual parts
-
Plunger Mechanism: Simple push-to-close, pull-to-open operation — stops water flow for pump maintenance without draining the pool
-
Standard 1.25" Fitment: Compatible with Intex, Bestway, Coleman, and most above ground pool brands
-
Durable Construction: Heavy-duty ABS plastic with UV inhibitors for long outdoor life
-
Cross-References: Intex 10747, 25010, 25080RP, 11872
Why Upgrade Your Pool Valves?
Plunger valves take a beating — constant opening and closing, sun exposure, and chemical contact all take their toll. A worn valve that doesn't fully close means your pool drains when you disconnect the pump for cleaning. A cracked nozzle disrupts circulation. A damaged strainer lets debris into the pump. Replacing all three components together ensures your filtration system operates at peak efficiency.
FAQ
Q: Is this compatible with Intex pool pumps?
A: Yes. This plunger valve kit is compatible with Intex and most other above ground pool filtration systems using standard 1.25-inch hose connections.
Q: What's the difference between 11872 and 10747?
A: The 11872 is a dual split hose plunger valve (two hose connections), while the 10747 is a standard single plunger valve assembly. Both share the same 1.25-inch hose size.
Q: Do I need Teflon tape for installation?
A: No. The hose connections use compression fittings with rubber gaskets — Teflon tape is not needed and can interfere with the seal. Ensure gaskets are properly seated and hand-tighten plus 1/4 turn.
Q: How do I stop a leaking plunger valve?
A: Common causes: worn O-ring (included in kit), cracked valve body, or loose hose clamp. Replace the O-ring first — it's the easiest fix and solves most leaks.
Related Products
