Description
Dryer Door Switch — Whirlpool & Kenmore Exact Replacement
The 3406107 Dryer Door Switch Replacement Exact Fit for Whirlpool Kenmore Dryer is a precision replacement door switch engineered for Whirlpool and Kenmore electric and gas dryers. This essential safety component detects when the dryer door is closed and enables the drying cycle to start — a malfunctioning switch is one of the most common causes of a dryer that won't turn on.
Key Features
-
Exact OEM Fitment — Matches original Whirlpool/Kenmore specifications for seamless plug-and-play installation
-
3-Terminal Design — Correctly wired for drum light control and motor safety interlock
-
Durable Construction — High-quality contacts rated for thousands of open/close cycles
-
Safety Critical Component — Properly stops the drum from spinning when door is opened (essential for household safety)
-
Universal Compatibility — Fits most Whirlpool-manufactured dryers including Kenmore, Maytag, Amana, and Roper brands
Compatible Brands & Models
| Brand |
Typical Models |
| Whirlpool |
Duet, Cabrio, WED/WGD Series (most 2000-present models) |
| Kenmore |
110, 400, 600, 700, 800 Series (Whirlpool-manufactured) |
| Maytag |
Bravos, Centennial, Performa Series |
| Amana |
Most electric and gas dryer models |
| Roper |
All dryer models |
Technical Specifications
| Specification |
Detail |
| Part Number |
3406107 / WP3406107 |
| Switch Type |
3-Terminal Momentary Push-Button |
| Electrical Rating |
120V AC / 15A |
| Terminal Configuration |
COM / NO / NC |
| Actuator Type |
Spring-Loaded Plunger |
Symptoms of a Bad Door Switch
- Dryer will not start when the start button is pressed
- Dryer drum light stays on when door is closed
- Dryer stops mid-cycle when door is bumped
- Dryer runs with the door open (safety hazard!)
- Intermittent operation — works sometimes, not others
Installation Guide
-
Unplug the dryer from the wall outlet before beginning
- Remove the dryer top panel (typically 2 screws at the rear, then slide forward)
- Locate the door switch behind the front panel near the door latch area
- Disconnect the 3 wires from the old switch, noting their positions
- Remove the old switch (tabs or screw mount)
- Install the new switch and reconnect wires to matching terminals
- Reassemble and test operation
Why Choose iFJF
-
OEM Quality at a Better Price — Same specifications as factory part at significant savings
-
Quick DIY Fix — Most common dryer no-start problem solved in under 30 minutes
-
US Stock — Ships fast from our domestic warehouse
Frequently Asked Questions
Q: How do I know if my door switch is the problem?
A: If your dryer doesn't start but has power (lights work, timer advances), the door switch is the most likely culprit. You can test with a multimeter: the switch should show continuity (0 ohms) when the plunger is pressed.
Q: Will this fit my Kenmore dryer?
A: This fits Kenmore dryers manufactured by Whirlpool (model numbers starting with 110.). If your Kenmore was made by LG or Samsung, it may not fit. Check your existing part number before ordering.
Q: Is this the same as OEM part 3406107?
A: Yes. This is a direct replacement for Whirlpool part number 3406107 / WP3406107 / AP6007995. It matches the OEM specifications for fit, form, and function.
Q: Can I install this myself?
A: Yes! Door switch replacement is a beginner-friendly DIY repair. Most installations take 15-30 minutes with just a screwdriver and possibly a nut driver.
