Description
3514635 3585502 Rear Wheel Bearing Kit — Polaris Ranger 400-900 4x4
The 3514635 3585502 Rear Wheel Bearing Kit is a complete rear wheel bearing replacement set engineered for Polaris ATV and UTV models. Restore smooth wheel rotation, eliminate grinding noise, and fix excessive wheel play with this direct-fit bearing kit. Whether you're servicing a workhorse Ranger or prepping for the trail, fresh bearings mean safer, more predictable handling — and no seized hubs in the backcountry.
Key Features
-
Complete Replacement Set: Includes all bearings, seals, and snap rings needed for a full rear wheel bearing service — both sides.
-
Precision-Ground Races: Heat-treated chrome steel (GCr15) bearings with precision-ground races for smooth rotation and long service life under heavy loads.
-
Double-Lip Seals: Upgraded double-lip rubber seals keep water, mud, and sand out significantly better than single-lip seals — critical for ATV/UTV use.
-
Pre-Packed Grease: Bearings come pre-packed with high-temp, water-resistant lithium complex grease — ready to install out of the box.
-
Direct OEM Replacement: Matches Polaris part numbers 3514635 and 3585502 exactly — no modifications needed.
Compatibility
| Make |
Model |
Engine |
Years |
| Polaris |
Ranger 400 |
400cc |
2010-2014 |
| Polaris |
Ranger 500 |
500cc |
2005-2018 |
| Polaris |
Ranger 700 |
700cc |
2005-2010 |
| Polaris |
Ranger 800 |
800cc |
2010-2014 |
| Polaris |
Ranger 900 |
900cc |
2013-2019 |
| Polaris |
Worker 500 4x4 |
500cc |
Various |
Frequently Asked Questions
Q: How do I know if my wheel bearings need replacement?
A: Common symptoms: grinding or humming noise from the wheel area that changes with speed, excessive wheel play when you rock the tire side-to-side, uneven tire wear, or the wheel feeling "loose" during turns. To test: jack up the ATV, grab the tire at 12 and 6 o'clock, and rock it — any play indicates worn bearings.
Q: Can I replace just one side?
A: We recommend replacing both sides at the same time. Bearings wear at similar rates, and if one side is gone, the other is usually not far behind. This kit includes components for both sides.
Q: What tools do I need for this job?
A: You'll need a bearing press or a bearing driver kit, snap ring pliers, socket set, torque wrench, and a dead blow hammer. A hydraulic press makes the job straightforward. Without one, you can use the freezer/heat method (freeze bearings, heat hub with a heat gun), but a press is strongly recommended.
Related Guides & Articles
