iFJF Aluminum Floor Jack Pad Billet Compatible with All 1997-2021 C5/C6/C7 and Cayenne /911 Premium Bolt on Jack Points Red 4 Packs

Description

Fitment: Compatible with 1997-2021 C5, C6, C7 and C8 models, including Z06 Zr1 and Cayenne /911

Material Selection: Advanced aluminum embryo raw materials, and supporting bolts, gaskets after strict screening, precise size, precise hole position and durable

Scientific Design: Bevel is designed so that your car will not get stuck at 9/16 depth on any road surface, extra bonus protection for battery and painting

Easy Installation: (1) Find four holes the size of gaskets in the chassis of the car and clean them up. (2) Pass two screws through the two holes of the floor jack pad billet and connect the gaskets, screw them in several turns to make the gaskets feel a little force. (3) Insert the gasket end into the chassis hole and rotate 90° to make the gaskets hang on the chassis. (4) Use the hexagon wrench to tighten the two screws, and install the other three screws in the same way.

Packing List: 4 × Red aluminum jack pads, 8 × Bolts, 4 × Gaskets, 1 × Hexagon wrench(as shown)

iFJF Aluminum Floor Jack Pad Billet Compatible with All 1997-2021 C5/C6/C7 and Cayenne /911 Premium Bolt on Jack Points Red 4 Packs

Product form

SKU: FJ-JACKPAD-BSJ-RD

$47.99

    • Shipped today? Order within: May 31, 2024 17:00:00 +0800

    Description

    Fitment: Compatible with 1997-2021 C5, C6, C7 and C8 models, including Z06 Zr1 and Cayenne /911

    Material Selection: Advanced aluminum embryo raw materials, and supporting bolts, gaskets after strict screening, precise size, precise hole position and durable

    Scientific Design: Bevel is designed so that your car will not get stuck at 9/16 depth on any road surface, extra bonus protection for battery and painting

    Easy Installation: (1) Find four holes the size of gaskets in the chassis of the car and clean them up. (2) Pass two screws through the two holes of the floor jack pad billet and connect the gaskets, screw them in several turns to make the gaskets feel a little force. (3) Insert the gasket end into the chassis hole and rotate 90° to make the gaskets hang on the chassis. (4) Use the hexagon wrench to tighten the two screws, and install the other three screws in the same way.

    Packing List: 4 × Red aluminum jack pads, 8 × Bolts, 4 × Gaskets, 1 × Hexagon wrench(as shown)

    Recently viewed products

    © 2024 iFJF Direct

      • PayPal

      Login

      Forgot your password?

      Don't have an account yet?
      Create account