Products

iFJF Swimming Pool Pipe Support with Plunger Valve – 2-Pack (1.25" & 1.5") Secure your above ground pool plumbing with this dual-size pipe support and plunger valve kit from iFJF. Each set includes pipe supports compatible with both 1.25-inch and 1.5-inch fittings, plus integrated plunger valves for convenient flow control. Key Features Dual Size Compatible: Works with both 1.25-inch and 1.5-inch above ground pool fittings – one kit covers multiple connection sizes Integrated Plunger Valve: Each support includes a plunger-style shut-off valve for quick water flow control during maintenance 2-Pack Value: Two complete assemblies included – perfect for inlet and outlet connections Durable Construction: Made from UV-resistant, impact-resistant materials built for outdoor pool environments Secure Fit: Engineered to hold pipes firmly in place, reducing strain on pool wall fittings Compatibility Designed for above ground swimming pool plumbing systems using 1.25-inch or 1.5-inch hose connections. Compatible with most standard above ground pool brands and sand filter pump setups. Specifications Package: 2-Pack (2 pipe supports with plunger valves) Fits Hose Sizes: 1.25 inch and 1.5 inch Valve Type: Plunger / Push-Pull Shut-Off Application: Above Ground Pool Fittings Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

1.25-Inch Pool Inlet Jet Nozzle, Hose Holder & Strainer Grid Kit Complete iFJF pool connection kit for above ground swimming pools. Includes everything you need to connect your filtration pump — inlet jet nozzle, hose pipe holder, strainer grid, and hose clamps. Designed for 1.25-inch hose systems. Features High-quality plastic and rubber construction for durability and watertight seal Strainer grid filters out leaves and large debris before they reach the pump Inlet jet nozzle directs return water flow for optimal circulation Hose pipe holder provides stable support at the pool wall connection Complete kit — no need to source individual parts separately Compatibility Fits most above ground swimming pools with 1.25-inch hose connections Compatible with pool pumps under 1000 gallons per hour (GPH) Note: If your hose is 1.5 inches, an adapter B is required (not included) Installation Order Strainer Grid → Hose Clamp → Hose → Pool Pump → Hose → Hose Pipe Holder → Hose Clamp → Inlet Jet Nozzle Package Includes 1 x Pool Pipe Holder 1 x Strainer Grid 1 x Inlet Jet Nozzle 2 x Hose Clamps Factory Direct Supply — iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

10-Pack Brass Pool Cover Anchor Collar Beauty Rings iFJF premium brass beauty rings for pool cover anchor systems. These collars sit flush around your pool cover anchors, providing a clean, finished look while protecting the anchor area from debris and wear. Features Made from high-quality solid brass — superior durability in harsh cold weather Rigorously tested to withstand extreme temperature fluctuations and pool chemicals Universal fit works with most major pool cover brand brass anchors Suitable for both inground and above ground pool covers Value 10-pack covers a complete pool anchor setup Compatibility Works with most major pool cover brand brass anchor systems. Please verify your anchor dimensions before ordering. Specifications Material: Solid Brass Inner Diameter: 9/16 Inch Outer Diameter: 1-1/2 Inch Quantity: 10 Collars per Pack Factory Direct Supply — iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

10747 / 25010 Plunger Valve Assembly for Above Ground Pool Systems iFJF replacement plunger valve assembly designed for Intex and most above ground pool filtration systems. Controls water flow between the pool and filter pump, allowing you to shut off flow for maintenance without draining. Features Replaces part numbers: 25010, 25080RP, 10747 Works with Intex 1500, 2500, 4000 GPH filtration pumps Also compatible with Intex saltwater chlorinators and 2500 GPH chlorinators Includes O-rings for a watertight seal — no leaks on startup Universal fit for most above ground pool brands including Intex and Summer Waves Compatibility Fits models: 28633EG, 28635EG, 28645EG, 28647EG, 28651EG, 28671EG, 28677EG, 28681EG Note: A 1.5-inch hose adapter is required for perfect fit (not included) Specifications Replacement Part Numbers: 25010, 25080RP, 10747 Package Includes: 2 x Plunger Valves + 3 x O-Rings Application: Above Ground Swimming Pools Factory Direct Supply — iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

11872 Dual Split Hose Plunger Valve for Above Ground Pool Pumps iFJF replacement dual split hose plunger valve for above ground swimming pool filtration systems. This valve controls water flow between your pool and pump — use it to shut off water during filter cleaning, pump maintenance, or vacuuming. Features Dual-split design — controls both suction and return hoses simultaneously Opens and closes water flow from the pool to the filtration system with a simple push/pull action Built-in shutoff allows pump maintenance without draining the pool Also usable for vacuum pumping operations Durable plastic construction resists pool chemicals and UV exposure Compatibility Fits models: 26323CA, 26331CA, 26361CA, 26371CA, 26175EH, 26193EH, 26303EH, 26321EH, 26323EH, 26331EH, 26335EH, 26337EH, 26351EH, 26371EH, 26375EH, 26381EH, 26301T, 28345VM, 26341W, 26345W, 26351W, 26751W Suitable for most above ground pools and equipment including Intex and Summer Waves Specifications Replacement Part Number: 11872 Type: Dual Split Hose Plunger Valve (2 valves) Function: Shuts off both hoses simultaneously Application: Above Ground Swimming Pools with Electric or Manual Pumps Factory Direct Supply — iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

11872 Dual Split Hose Plunger Valve Kit with Nozzle and Strainer Complete iFJF plunger valve and hose connection kit for above ground swimming pools. This all-in-one set includes dual split hose plunger valves, inlet air nozzle, strainer connectors, and strainer grids — everything needed to connect and control water flow between your pool and filtration pump. Features Dual split hose plunger valves allow independent hose shutoff — convenient for pump maintenance Made from high-quality, durable materials built to withstand pool chemicals and outdoor conditions Includes strainer grids to catch debris before it reaches the pump 1.25-inch connections — standard for most above ground pool systems All-in-one kit replaces multiple worn parts in a single purchase Compatibility Dual Split Hose Plunger Valve — fits models: 26323CA, 26331CA, 26361CA, 26371CA, 26175EH, 26193EH, 26303EH, 26321EH, 26323EH, 26331EH, 26335EH, 26337EH, 26351EH, 26371EH, 26375EH, 26381EH, 28345VM, 26301T, 26341W, 26345W, 26351W, 26751W Pool Plunger Valve Assembly — fits models: 28633EG, 28635EG, 28645EG, 28647EG, 28651EG, 28671EG, 28677EG, 28681EG Compatible with pool pumps under 1000 GPH. Not suitable for inflatable pools. If your hose is 1.5 inches, adapter B is required (not included). Replacement Part Numbers Dual Split Hose Plunger Valve: 11872 Pool Plunger Valve Assembly: 10747, 25010, 25080RP Pool Inlet Air Nozzle: 12364 Pool Inlet Strainer Connector: 12365 Strainer Connectors: 11070 Strainer Grids: 11072 Package Includes 2 x Split Hose Plunger Valves 1 x 1.25" Pool Inlet Air Nozzle 1 x 1.25" Pool Inlet Strainer Connector 2 x Strainer Connectors 2 x Strainer Grids Factory Direct Supply — iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

122-0833 Oil Filter — Premium Replacement for Cummins Onan RV Generators The iFJF 122-0833 Oil Filter is a full-flow spin-on lube filter engineered for Cummins Onan Quiet Diesel RV generators. With 30-micron filtration and 98% efficiency, it traps carbon deposits, metal wear particles, and combustion byproducts before they can damage your generator's engine bearings and oil pump. Manufactured to IATF 16949 quality standards. Generator Compatibility Series Spec Range Generator Models HDKAH Spec A–R RV QD 3200, 6000, 8000 HDKAK Spec A–R RV QD 10000, 12500 HDKAJ Spec A–L Late-model Quiet Diesel HDKBA Spec A–E Older Quiet Diesel generators HQDPA Spec A–C Quiet Diesel commercial series HQDPC Spec C Quiet Diesel commercial Cross-Reference Part Numbers Brand Part Number Cummins Onan (OEM) 122-0833 Fleetguard LF3591 Baldwin B179 WIX 51064 Fram PH3593A John Deere AM101378 Other PF1127, ML 1002 Specifications Spec Value Filter Type Full-flow lube spin-on Thread Size M20 × 1.5 mm Filtration Rating 30 micron Efficiency 98% Height 3.39 in (86 mm) Outer Diameter 3.02 in (77 mm) Key Benefits Full-Flow Design — All engine oil passes through the filter media before reaching bearings, camshaft, and valve train. No bypass during normal operation. Anti-Drainback Valve — Prevents oil from draining out of the filter when the generator is shut down, ensuring instant oil pressure on startup — critical for infrequently-used RV generators. High Dirt-Holding Capacity — Cellulose/synthetic blend media holds more contaminants before reaching capacity, extending service intervals without bypass. Spin-On Convenience — Standard spin-on design. Hand-tighten after gasket contact — no torque wrench needed. When to Replace Cummins Onan recommends oil and filter changes every 150 hours of generator runtime or annually. RV generators often sit unused for months — condensation and acid buildup in the oil are just as damaging as runtime wear. Change the oil filter with every oil change. If you run the generator in dusty conditions or use it as your primary power source while boondocking, consider 100-hour intervals. Installation Tips Warm up the generator for 5 minutes to thin the oil, then shut down. Place a drain pan under the oil drain plug and filter. Remove the old filter with a strap wrench or cup-style filter wrench. Clean the filter mounting surface and apply a thin film of fresh oil to the new filter's gasket. Spin on by hand until gasket contacts the mounting surface, then hand-tighten an additional ¾ turn. Refill with oil, run the generator for 30 seconds, shut down, and check for leaks. Top off oil as needed. Frequently Asked Questions Q: What's the difference between this and a standard automotive oil filter?A: This filter is specifically designed for the Cummins Onan generator engine — it has the correct thread pitch (M20×1.5), bypass valve setting, and anti-drainback valve for this application. A standard car filter may physically thread on but won't have the correct internal specs. Q: Can I use this filter with synthetic oil?A: Yes. Compatible with conventional, synthetic blend, and full synthetic diesel engine oils. For synthetic oil extended drain intervals, follow the oil manufacturer's recommendation — but do not exceed Cummins Onan's maximum of 150 hours between filter changes regardless of oil type. Q: Does this come with the O-ring or gasket?A: Yes, the rubber gasket is pre-installed on the filter. Lubricate it with clean oil before installation for a proper seal. Q: Need the fuel filter and air filter too?A: Check our Complete Maintenance Kit — includes this oil filter plus the 149-2513 fuel filter and 140-2897 air filter in one order. Or buy individually: 149-2513 fuel filter · For gasoline Onan models: 149-2341-01 Fuel Filter Pump fits Marquis Gold, BGM, NHM, RV QG generators. DIY replacement guide → 140-2897 air filter.

Read more less

Air Jet Valve & Cap Kit — 12363 / 12373 Replacement Replaces Part Numbers: 12363, 12373. Compatible with Above Ground Pool Models: 26165EH, 26167EH, 26175EH, 26183MW, 26191CA, 26191EH, 26193EH, 26301T, 26303EH, 26309EH, 26321EH, 26323CA, 26323EH, 26331CA, 26331EH, 26335EH, 26337EH, 26341W, 26343EH, 26345W, 26351EH, 26351W, 26361CA, 26361EH, 26361W, 26365EH, 26371CA, 26371EH, 26375EH, 26381EH, 26719MW, 26719W, 26733EH, 26735EH. Key Features Perfect Fit: Direct replacement for 12363 air jet valve and 12373 air jet valve cap — no cutting or adaptation needed. Controls Water Flow: The air jet valve at your pool inlet regulates circulating water, maintaining proper pressure and flow throughout your above ground pool system. Quality Materials: Manufactured from high-grade, UV-resistant plastic that withstands pool chemicals and outdoor exposure. Complete Kit: Includes 1 x Air Jet Valve and 1 x Air Jet Valve Cap — everything you need for a single inlet replacement. Package Includes 1 x Air Jet Valve + 1 x Air Jet Valve Cap Note: Professional installation recommended. No installation instructions included. Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

Overview The iFJF 140-2897 Air Filter 3-Pack keeps your Onan QD and HQD Series RV generator breathing clean — and your wallet happy with bulk savings. Designed as a direct replacement for the factory air filter, this filter uses a metal-reinforced mesh and durable plastic frame to trap dirt, dust, and debris before they reach your generator's engine. Dirty air is the #1 cause of power loss and premature wear in RV generators — swapping in a fresh filter every 500 hours (or more often in dusty conditions) is the cheapest preventive maintenance you can do. This value 3-pack covers a full season or multiple maintenance cycles. Each filter replaces OEM numbers 140-2897, PA5658, 83697, AF27906, LAF5978, CA11094, and 49697. Fits Onan QD Series (HDKAH Spec A-N, HDKAK Spec A-N, HDKAJ Spec A-L) and HQD Series (HQDPA Spec A-C, HQDPC Spec C). Key Features 3-Pack Value — Three filters at bulk pricing saves 30%+ compared to buying individual replacements. Stock up for a full season. Metal-Reinforced Frame — Unlike cheaper all-plastic alternatives, the integrated metal mesh prevents filter collapse and deformation under high-vacuum conditions, maintaining consistent airflow. Universal Fit for Onan QD/HQD — One filter covers all QD Series models (HDKAH, HDKAK, HDKAJ) and HQD Series (HQDPA, HQDPC). No guesswork. Superior Dirt-Holding Capacity — High-efficiency filter media captures fine dust, pollen, and debris while allowing full airflow for rated generator output. Quick Swap Design — Direct drop-in replacement. Open the housing cover, slide the old one out, slide the new one in — under 2 minutes with no tools. Compatibility / Fitment Generator Series Engine Spec / Models Onan QD Series HDKAH (Spec A-K), HDKAH (Spec L-N), HDKAK (Spec A-K), HDKAK (Spec L-N), HDKAJ (Spec A-K), HDKAJ (Spec L) Onan HQD Series HQDPA (Spec A-C), HQDPC (Spec C) Replaces OEM # 140-2897, PA5658, 83697, AF27906, LAF5978, CA11094, 49697 Specifications Specification Details Filter Dimensions 5.8"L x 4"W x 3"H Frame Material Plastic with integrated metal mesh reinforcement Filter Media High-efficiency pleated cellulose/synthetic blend Package Quantity 3 filters per pack Maintenance Interval Every 500 hours (more often in dusty conditions) Why Choose This 3-Pack Onan generators are workhorses — but dirty air chokes them fast. A clogged filter robs output power, increases fuel consumption, and can cause hard starting or rough running. With this 3-pack, you're always ready for the next service interval without an emergency parts run. At under $14 per filter in this multi-pack, it's a fraction of what the OEM-branded filter costs at an RV dealership. Frequently Asked Questions Q: How do I know if this fits my Onan generator?A: Check your generator's data plate for the model number. If you see HDKAH, HDKAK, HDKAJ (QD Series) or HQDPA, HQDPC (HQD Series), this filter fits. Q: How often should I replace the air filter?A: Onan recommends every 500 hours under normal conditions. If you frequently operate in dusty, sandy, or off-road environments, inspect every 250 hours and replace as needed. Q: Is this a washable/reusable filter?A: No — this is a dry paper/cellulose filter element designed for one-time use. Do not attempt to wash or oil this filter. Q: Why buy a 3-pack instead of a single filter?A: You save 30%+ per filter compared to buying singles. The 3-pack covers your full season with one purchase. Q: How does this compare to the OEM Onan 140-2897 filter?A: Same dimensions, same fit, same 500-hour rated service life. The main difference is price — iFJF filters cost significantly less without sacrificing filtration performance. Keep your Onan generator breathing clean — 3-pack value ships today from iFJF.

Read more less

140-2897 Air Filter — Premium Replacement for Cummins Onan Quiet Diesel Generators The iFJF 140-2897 Air Filter is a direct-fit panel filter engineered for Cummins Onan Quiet Diesel RV generators. Built with high-flow pleated cellulose media and a reinforced metal mesh frame, it traps dust, pollen, sand, and road debris before they can enter your generator's combustion chamber. Clean air means clean combustion — and clean combustion means reliable power when you need it most. Generator Compatibility Series Spec Range Generator Models HDKAH Spec A–K & Spec L–N 7.5HDK, 8HDK (all variants) HDKAK Spec A–K & Spec L–N 10HDK (all variants) HDKAJ Spec A–K & Spec L 8HDK, 10HDK late-model HQDPA Spec A–C Quiet Diesel commercial series HQDPC Spec C Quiet Diesel commercial Cross-Reference Part Numbers Brand Part Number Cummins Onan (OEM) 140-2897 Fleetguard AF27906 Baldwin PA5658 WIX 49697 Donaldson P181050 Other LAF5978, CA11094, 83697 Key Features Reinforced Metal Mesh Frame — Prevents filter collapse under high vacuum conditions (heavy generator loads at altitude). Plastic-frame alternatives can deform; this one won't. High-Flow Pleated Media — Maximizes surface area for air intake while maintaining filtration efficiency. Your generator breathes easily even at full load. Dust & Debris Protection — Captures airborne particulates that cause cylinder bore wear, ring damage, and oil contamination. Essential for generators operated at dusty campsites, construction sites, or desert environments. Direct Drop-In Fit — No modifications, no adapters. Remove the air filter housing cover, swap the element, and close. Under 5 minutes from start to finish. When to Replace Your Generator Air Filter Cummins Onan recommends air filter inspection every 250 hours and replacement every 500 hours — or more frequently in dusty conditions. A clogged air filter chokes the engine, causing: Black smoke from the exhaust (incomplete combustion from restricted airflow) Reduced power output and generator surging under load Increased fuel consumption — the engine compensates for restricted air with more fuel Hard starting, especially in cold weather Premature engine wear from dust bypassing a loaded filter RV owner tip: If you boondock in dusty areas (deserts, dry lake beds, gravel roads), inspect your air filter every 100 hours. A $14 air filter is far cheaper than a generator rebuild. Installation — 5 Minutes, No Tools Required Open the generator compartment access door. Locate the air filter housing on the intake side of the engine. Release the housing cover clips or screws — most HDK models use tool-free spring clips. Remove the old filter element. Note its orientation — the metal mesh side faces the engine. Insert the new 140-2897 filter with the metal mesh side facing inward (toward the engine). Replace the housing cover and secure the clips. Ensure the cover seats evenly — no gaps. Start the generator and verify smooth operation. Frequently Asked Questions Q: Can I clean and reuse this air filter?A: No. This is a dry paper element filter, not a washable/oiled filter. Attempting to clean it with compressed air or water will damage the media fibers and reduce filtration efficiency. Always replace with a new 140-2897 element at the recommended interval. Q: How do I know if my air filter needs replacing before the 500-hour mark?A: Hold the filter up to a light source. If you can't see light through the pleats, or if the filter appears dark/discolored, it's time to replace. Also check for physical damage — tears, dents in the metal mesh, or unseated gaskets. Q: Does this fit both the early and late HDKAH models?A: Yes. The 140-2897 fits both the early Spec A–K and later Spec L–N HDKAH generators. The air filter housing design didn't change between revisions. Q: Are the fuel and oil filters also available?A: Yes. The 122-0833 oil filter and 149-2513 fuel filter are available individually. Or save with our Complete 3-Filter Maintenance Kit — For gasoline Onan models: 149-2341-01 Fuel Filter Pump fits Marquis Gold, BGM, NHM, RV QG generators. Step-by-step guide → all three filters in one order.

Read more less

149-2513 Fuel Filter — Premium OEM-Spec Replacement for Cummins Onan Quiet Diesel RV Generators The iFJF 149-2513 Fuel Filter is a precision-engineered OEM-spec replacement for Cummins Onan Quiet Diesel RV generators. Manufactured to IATF 16949 quality standards with 5-micron high-efficiency cellulose media, this spin-on filter protects your generator's fuel injection system from contaminants that cause surging, hard starting, and expensive injector repairs. Available in 1/2/3/6-pack options — from single replacement to fleet-level bulk value. Key Features IATF 16949 Certified Quality — Manufactured in facilities meeting the same quality management standards as OE suppliers to Cummins. Consistent filtration performance across every filter. 5-Micron Filtration — High-efficiency cellulose media removes 98% of carbon, sand, dirt, metal debris, and other harmful particles 5 microns and above. Meets or exceeds Cummins Onan OEM specifications. High-Flow Design — Engineered for the fuel demands of RV generators without restricting flow, ensuring your generator delivers full power under heavy electrical loads. Precision Spin-On Fit — Machined threads and gasket seat match Onan OEM specifications for a leak-free seal every time. No cross-threading, no fuel seepage. Corrosion-Resistant Coating — Exterior coating stands up to the moisture and temperature swings of RV generator compartments without rust or corrosion. Generator Compatibility Generator Series Models Covered Typical Applications HDKAH All HDKAH Quiet Diesel (Spec A-K) Class A & Class C motorhomes HDKCA / HDKCB All HDKCA & HDKCB (Spec A-F) Fifth-wheel toy haulers, Class A pushers HDCAA / HDCAB All HDCAA & HDCAB (Spec A-D) Mobile command centers, food trucks, work trailers HDKAJ / HDKAK / HDKBA All HDKAJ, HDKAK & HDKBA (Spec A-E/K) Late-model diesel pushers, high-end fifth wheels Also fits 7.5HDK, 8HDK, and 10HDK models. If your generator data plate shows "Quiet Diesel" with an HDK prefix, this filter fits. Cross-Reference Part Numbers Brand Part Numbers Cummins Onan (OEM) 149-2513, 1492513 Onan 25010487 Baldwin BF806 Fleetguard FF236 WIX 33063 Other Cross-References P55-0888, F50033, PF-888, TP-888, ALG-888, FP-888, P77-9307, 86063, 3063 Choose Your Pack Size Pack Best For Price Per Filter 1-Pack Single replacement or first-time buyers $19.99 2-Pack RV owners who want one spare on hand $18.50 (save 7%) 3-Pack 3 seasons of annual maintenance $17.66 (save 12%) 6-Pack Full-time RVers, fleet operators, best value $15.83 (save 21%) Each filter individually sealed to prevent contamination during storage. All filters identical — same IATF 16949 quality regardless of pack size. When to Replace Your Generator Fuel Filter Cummins Onan recommends fuel filter replacement every 500 hours of generator runtime or annually, whichever comes first. Replace sooner if you: Frequently run in dusty conditions or use fuel from rural stations/marinas Notice generator surging or hunting under load Experience hard starting or failure to start See reduced power output or increased fuel consumption Observe black smoke from the exhaust Pro tip: Always carry a spare filter. A bad tank of fuel can clog a filter in a single fill-up — and a dead generator means no AC, no microwave, and no happy campers. Installation Guide Locate the filter — On the fuel system side of the generator, near the fuel pump assembly. Remove old filter — Use an oil filter strap wrench or cup-style filter wrench. Have rags ready for fuel drips. Prep new filter — Apply a thin film of clean diesel to the new filter's rubber gasket. This ensures a proper seal and makes future removal easier. Spin on by hand — Thread the new filter on until the gasket contacts the mounting surface, then hand-tighten an additional 3/4 to 1 turn. Do not overtighten with a wrench. Prime the system — The Onan Quiet Diesel has a self-priming electric fuel pump. Crank the generator in 10-15 second bursts. It typically starts on the 2nd or 3rd attempt as the system purges air. Do not use starting fluid. Tools needed: Oil filter strap wrench or cup-style filter wrench, clean rags, disposable gloves. Total job: 10-15 minutes. Frequently Asked Questions Q: Will this fit my Onan Quiet Diesel generator? A: Yes. The 149-2513 is the standard spin-on fuel filter for all Cummins Onan Quiet Diesel HDK-series RV generators, including the 7.5HDK, 8HDK, and 10HDK models. If your generator data plate says "Quiet Diesel" with an HDK model prefix, this filter fits. Q: Do I need to bleed the fuel system after replacing? A: No. The Onan Quiet Diesel electric fuel pump is self-priming. After installing the new filter, crank the generator in 10-15 second bursts (2-3 attempts typical) to purge air from the new filter. Do not use starting fluid or ether. Q: Is this a genuine Cummins part? A: This is a premium OEM-spec replacement manufactured by iFJF Direct to IATF 16949 quality standards. It meets or exceeds Cummins Onan OEM filtration specifications. It is not a Cummins-branded part, but delivers the same performance at a better value. Q: Is this filter compatible with biodiesel blends? A: Yes. Compatible with standard diesel and biodiesel blends up to B20. For B20 or higher blends, we recommend reducing the change interval to every 250 hours, as biodiesel can loosen tank deposits and accelerate filter loading. Q: How long can I store a spare filter? A: Indefinitely when kept in its sealed packaging in a cool, dry location. The cellulose media and rubber gasket are stable for years of shelf storage. That's why stocking up with a multi-pack makes economic sense. Q: Do I need the oil filter and air filter too? A: Yes — Cummins Onan recommends replacing all three filters during scheduled maintenance. The 122-0833 oil filter protects your engine bearings, and the 140-2897 air filter keeps dust out of the combustion chamber. Grab our Complete Maintenance Kit to get all three in one order. Complete Your Generator Service For full generator maintenance, pair this fuel filter with: 122-0833 Oil Filter — 30-micron full-flow spin-on, replaces WIX 51064 / LF3591 / B179 140-2897 Air Filter — Panel-style with metal mesh frame, replaces AF27906 / PA5658 / WIX 49697 Or save with the Complete 3-Filter Maintenance Kit — all three filters in one convenient order for $43.99. One shipment, one service session, For gasoline Onan models: 149-2341-01 Fuel Filter Pump fits Marquis Gold HGJAB, BGM, NHM, and RV QG 4000-6500. Full replacement guide → zero hassle.

Read more less

1R-0750 Aluminum Fuel Filter Housing for 2001–2016 Duramax 6.6L Diesel If you own a Duramax, you've probably heard the horror stories — or lived one. The OEM plastic fuel filter housing cap on 2001–2016 GM trucks is notorious for cracking, warping, and leaking under the heat and pressure of daily driving. When it fails, it doesn't just create a mess — it introduces air into the fuel system, causing hard starts, rough idle, and potential CP3/CP4 injection pump damage. This CNC-machined 6061-T6 billet aluminum refit head eliminates that failure point permanently. ⚠️ Common Symptom Check: Hard start after sitting overnight? Air in the clear fuel line? Fuel smell under the hood? Your plastic factory filter cap may already be failing. This billet aluminum upgrade is a one-and-done fix. Key Features CNC-Machined 6061-T6 Billet Aluminum — Precision-machined from aerospace-grade aluminum bar stock, not cast. Maintains dimensional stability through extreme heat cycles that warp and crack OEM plastic caps. Permanent Upgrade Over OEM Plastic — The factory plastic filter head on Duramax engines is a known weak point. Heat cycling causes micro-cracks that grow into air leaks — introducing air into the CP3 high-pressure pump. This aluminum housing eliminates the problem at the source. Accepts Standard 1R-0750 / BF7633 Filter Elements — Designed to work with the same OEM-spec secondary fuel filter elements you already use. No special filters required — just swap the cap and use your regular filter. Anodized Corrosion Protection — Hard anodized finish resists corrosion from road salt, diesel fuel exposure, and under-hood chemicals. Won't rust, pit, or degrade like untreated aluminum or plastic. O-Ring Groove Precision — The sealing surface is machined to exact OEM tolerances for a consistent, leak-free seal with the filter element gasket every single change. Compatibility Year Make Model Engine 2001–2004 Chevy / GMC Silverado 2500HD/3500HD, Sierra 2500HD/3500HD 6.6L Duramax LB7 2004.5–2006 Chevy / GMC Silverado 2500HD/3500HD, Sierra 2500HD/3500HD 6.6L Duramax LLY 2006–2007 Chevy / GMC Silverado 2500HD/3500HD, Sierra 2500HD/3500HD (Classic) 6.6L Duramax LBZ 2007.5–2010 Chevy / GMC Silverado 2500HD/3500HD, Sierra 2500HD/3500HD 6.6L Duramax LMM 2011–2016 Chevy / GMC Silverado 2500HD/3500HD, Sierra 2500HD/3500HD 6.6L Duramax LML Specifications Specification Value Material 6061-T6 Billet Aluminum Finish Hard Anodized (Clear or Black) Filter Compatibility 1R-0750, BF7633, P551313, 3114 secondary filters Manufacturing Process CNC Machined (not cast) Thread Standard OEM filter thread Why Upgrade to Aluminum? The Duramax secondary fuel filter housing operates in one of the hottest areas of the engine bay — directly above the turbo and exhaust manifold on the passenger side of the engine. The OEM plastic cap undergoes extreme thermal cycling: cold winter mornings, 200°F+ under load, and everything in between. Over 50,000–100,000 miles, this cycling causes the plastic to develop micro-cracks at the thread roots and sealing surfaces. Once air enters the fuel system, the CP3 high-pressure pump loses prime — resulting in hard starts, rough running, and accelerated pump wear. This billet aluminum cap solves the problem with a material that doesn't fatigue, warp, or crack from heat cycling. Frequently Asked Questions Q: Will this fit my 2015 Duramax LML?A: Yes. This housing fits all 2001–2016 Duramax 6.6L engines, including LML (2011–2016). It uses the same 1R-0750 secondary filter element you're already running. Q: Do I need to replace the whole filter assembly or just the cap?A: This is a direct replacement for the factory cap/filter head only. You keep your existing filter base/housing on the engine. Installation is: remove old plastic cap, swap the filter element into the new aluminum cap, screw it on. 15 minutes, basic hand tools. Q: How do I know if my OEM plastic cap is failing?A: Signs include: hard starting after the truck sits overnight, visible air bubbles in the clear fuel line between the filter and CP3 pump, fuel residue around the filter cap, or the cap feeling unusually loose when tightening. If you see any of these, replace the cap before it strands you. Q: Does this use the same O-ring as the factory cap?A: Yes. The O-ring that comes with your standard 1R-0750 or BF7633 filter element works perfectly. No special gaskets or seals required. Q: Can I use this with a lift pump?A: Yes. This aluminum housing is fully compatible with aftermarket lift pump systems (FASS, AirDog, etc.). The machined sealing surfaces handle the increased fuel pressure without leaking.

Read more less

1R-0750 Secondary Fuel Filter 3-Pack for 2001–2016 Duramax 6.6L & Caterpillar Engines The 1R-0750 secondary fuel filter is the last line of defense before fuel enters your Duramax's CP3 high-pressure injection pump — and it's the most overlooked maintenance item on these trucks. This 3-pack of secondary fuel filters provides three complete changes for 2001–2016 Duramax 6.6L engines (all generations: LB7 through LML) plus Caterpillar D4E and D6H heavy equipment. Each filter is individually sealed and manufactured in IATF 16949 certified facilities. 💡 Pro Tip: The secondary filter (on the engine, passenger side) should be replaced every other oil change — not just when you remember. With this 3-pack, you're covered for ~45,000 miles of driving. Pair with our billet aluminum filter head to permanently upgrade the failure-prone plastic cap while you're in there. Key Features IATF 16949 Certified Filtration — Manufactured to the same quality standard required for OE suppliers to GM and Caterpillar. Consistent micron rating, flow rate, and burst strength across every filter. Secondary (Final) Filtration Stage — This is the engine-mounted secondary filter, downstream from the primary fuel filter/water separator. It provides the final filtration before fuel hits the CP3 high-pressure pump — the most critical filtration stage in the Duramax fuel system. Multi-Layer Synthetic Media — Designed for the 26,000+ psi fuel pressures generated by the CP3 common-rail system. Captures contaminants as small as 4 microns absolute to protect injector nozzles from erosion. 3-Pack Value — Three filters at a bulk price. Covers three secondary filter changes (roughly 45,000 miles of driving for the average Duramax owner). Keep one on the shelf and never run an overdue filter. Dual Application — On-Highway + Off-Highway — Same filter element used in both the Duramax 6.6L and Caterpillar D4E/D6H heavy equipment engines. If you run a Duramax truck and Cat equipment, one filter SKU covers both. Compatibility Application Year Make / Model Engine Chevrolet / GMC 2001–2016 Silverado 2500HD/3500HD, Sierra 2500HD/3500HD 6.6L Duramax LB7, LLY, LBZ, LMM, LML Caterpillar — D4E, D6H LGP Cat 3114, 3116 Diesel Cross-Reference Brand Part Number CAT (OEM) 1R-0750 Baldwin BF7633 Fleetguard P551313 Donaldson P551313 WIX 33114 Installation Guide — Duramax Secondary Filter The secondary fuel filter is located on the passenger side of the engine, mounted to the intake manifold area. It's the smaller of the two fuel filters on the Duramax — not the large spin-on filter under the driver's door (that's the primary). Tools needed: 36mm socket or filter wrench, clean rags, diesel-rated container for spills. Process: (1) Place a container under the filter housing to catch fuel. (2) Unscrew the cap/filter assembly — the filter element stays inside the cap. (3) Remove old filter, wipe the housing interior clean. (4) Install new filter into cap with new O-ring. (5) Reinstall cap — hand-tighten, then 1/4 turn with wrench. (6) Cycle key to ON (not start) 3-5 times to prime. (7) Start engine and check for leaks. Frequently Asked Questions Q: Which filter is this — primary or secondary?A: This is the secondary (final) filter — the smaller filter mounted on the engine, passenger side. It's the last filtration stage before the CP3 high-pressure fuel pump. The primary filter (larger, frame-mounted under driver's door) is a separate part. Q: How often should I change the secondary fuel filter?A: Every other oil change, or approximately every 15,000 miles under normal driving conditions. If you tow heavy or run biodiesel blends, change every 10,000 miles. The CP3 pump relies on clean fuel — a clogged secondary filter starves the pump and damages injectors. Q: Does this fit my Caterpillar D6H dozer?A: Yes. The 1R-0750 is the standard secondary fuel filter for Cat D4E and D6H LGP models with the 3114/3116 diesel engine. It's the same filter element used in the Duramax — one part number for both applications. Q: Do I need special tools for the Duramax filter change?A: A 36mm socket or a dedicated filter cap wrench makes the job easier. The filter housing is plastic (OEM) — avoid using a strap wrench directly on the cap, as it can crack. If you're upgrading to an aluminum cap, use our billet aluminum refit head for a permanent upgrade. Q: What happens if I don't change the secondary filter on time?A: A clogged secondary filter restricts fuel flow to the CP3 pump. Symptoms progress from hard starting → rough idle → power loss under load → CP3 pump cavitation damage → injector failure. On a Duramax, CP3 replacement is $1,500+. A $17 filter is cheap insurance.

Read more less

Precision RPM Monitoring — Any Engine, Any Vehicle The iFJF Universal 2" 52mm Electrical Tachometer Gauge delivers accurate, real-time RPM readings in a compact, easy-to-mount form factor. Whether you're tuning a gas engine, monitoring a diesel truck, or setting up an aftermarket dash, this tachometer gives you the clarity and reliability you need at a fraction of OEM cost. Key Features Bright LED Display — Super white LED face with red illuminated needle ensures instant readability day or night. Transparent lens keeps the gauge visible in daylight, while the backlit display shines clear after dark. Universal Cylinder Compatibility — Adjustable for 2, 3, 4, 5, 6, and 8-cylinder engines via a simple switch on the back. Works with gas, diesel, and most 4-stroke motors. Wide RPM Range — Reads 0–8,000 RPM (x1000 scale), covering everything from idle speed to redline for most passenger cars, light trucks, SUVs, and marine engines. Standard 2" (52mm) Size — Fits most universal gauge pods, A-pillar mounts, dash panels, and custom clusters. Drop-in replacement for worn OEM tachometers. 12V Powered — Standard automotive electrical compatibility. Simple 3-wire hookup (power, ground, signal). Complete Kit — Includes gauge, mounting hardware, and English installation manual. Professional installation recommended for best results. Specifications Gauge Type Electrical RPM Tachometer Gauge Diameter 2 inches (52mm) RPM Range 0–8,000 RPM (x1000 scale) Cylinder Settings 2 / 3 / 4 / 5 / 6 / 8 (rear switch) Display White LED face, red LED needle Power 12V DC (standard automotive) Package Dimensions 17.5 × 12.5 × 7.5 cm Package Weight 250g (0.55 lbs) What's Included 1 × 2" 52mm Tachometer Gauge Mounting Hardware Kit English Installation Manual Fitment Universal fit — compatible with any 12V vehicle or equipment that uses a standard ignition signal. Commonly installed in: Cars & sedans (gasoline) Light trucks & SUVs Diesel pickups (Ford Powerstroke, Dodge Cummins, Chevy Duramax) Classic cars & resto-mods Marine engines & boats ATVs, UTVs, and go-karts Generator sets & industrial equipment FAQ Q: Will this tachometer work with a diesel engine? Yes — if your diesel engine has a tachometer signal output (most modern diesel pickups do), this gauge will work. For older mechanical diesel engines without an electrical RPM signal, an external signal adapter or alternator tap may be required. Q: How do I set the cylinder count? There is a rotary switch on the back of the gauge with positions for 2, 3, 4, 5, 6, and 8 cylinders. Simply rotate to match your engine's cylinder count before installation. Q: Is the installation difficult? The gauge uses a standard 3-wire connection: +12V power, ground, and RPM signal wire to your ignition coil, ECU tach output, or alternator W-terminal. Basic wiring knowledge is sufficient, but professional installation is recommended if you're unfamiliar with automotive electrical work. A detailed English manual is included. Q: Can I install this in a gauge pod or pillar mount? Yes, the standard 2-inch (52mm) diameter fits virtually all universal gauge pods, A-pillar mounts, dash bezels, and custom panels. It uses a standard U-bracket mount included in the kit. Q: Is the display visible in direct sunlight? The transparent lens and super white LED provide good visibility during the day. At night, the backlit face and red illuminated needle offer sharp, glare-free readability. Q: What's the difference between this and a 7-color LED tachometer? This model uses a clean white LED face with a red needle — designed for clarity and OEM-like appearance rather than multi-color effects. It's ideal for drivers who want a professional, factory-look installation.

Read more less

Why You Need iFJF Ladder Stabilizer Rubber End Caps Extension ladder stabilizers are essential for safe elevated work, but their exposed metal ends can damage walls, siding, gutters, and even interior surfaces. Over time, worn or missing rubber tips also reduce the stabilizer's grip, increasing the risk of ladder slippage. The iFJF AC36-2 Rubber Tips End Caps provide the protective barrier your ladder setup needs—shielding your property from damage while keeping the ladder securely in place. Made of high quality rubber with metal inserts for wear resistance and long life, these end caps protect your house from damage from metal ladders and also help hold the ladder in place. They feature a tight fit and are easy to place on stabilizers. Suitable for Extension Ladder Standoff, Stabilizer AC78 & AC76. Package includes AC36-2 rubber tips end cap x 2. Fits Model Standoff / Stabilizer: AC78 & AC76. Package includes: AC36-2 rubber tips end cap x 2. Key Features Durable Rubber Construction: Manufactured from high-quality rubber engineered to resist cracking, hardening, and UV degradation even with frequent outdoor use. Reinforced Metal Inserts: Embedded metal cores inside each tip provide structural integrity, prevent tear-out, and keep the caps securely seated on the stabilizer arms over thousands of uses. Tight, Secure Fit: Designed to match the exact diameter of AC78 and AC76 stabilizer arms, these caps press on firmly and stay in place—no adhesives, zip ties, or constant readjustment needed. Wall & Surface Protection: The thick rubber cushioning prevents metal stabilizer arms from scratching, denting, or gouging siding, painted walls, gutters, and roofing materials. Enhanced Grip & Stability: The rubber surface creates friction against the contact wall or roof, reducing the chance of the ladder shifting or sliding sideways during use. Universal Ladder Compatibility: Suitable for most extension ladder standoff stabilizers that accept slip-on rubber end caps—verify your stabilizer model is AC78 or AC76. Technical Specifications Specification Detail Product Type Ladder Stabilizer Rubber End Caps / Tips Material High-Quality Rubber with Metal Inserts Compatible Stabilizer Models AC78, AC76 Part Number AC36-2 Package Quantity 2 Rubber Tips End Caps Application Extension Ladder Standoff / Stabilizer Brand iFJF Compatibility These AC36-2 rubber end caps are specifically designed for the following ladder standoff and stabilizer models: Stabilizer Model Type Fitment AC78 Extension Ladder Standoff Stabilizer Direct slip-on fit AC76 Extension Ladder Standoff Stabilizer Direct slip-on fit These caps are also commonly compatible with universal aftermarket stabilizers that use the same arm diameter as AC78/AC76 models. If you are unsure about your stabilizer model, measure the outer diameter of the stabilizer arm end and contact us for confirmation. When to Replace Your Stabilizer End Caps Cracks or Tears: Visible rubber damage means the metal inserts may be exposed, risking wall damage. Hardening or Brittleness: Rubber that has lost its flexibility will provide less grip and cushioning. Slipping Off: If caps no longer stay firmly seated on the stabilizer arms during use, they need immediate replacement. Missing Caps: Even one missing cap creates an uneven contact point and increases slip risk. After a Fall: If the ladder has fallen or been dropped on the stabilizer, inspect and replace damaged caps before next use. Frequently Asked Questions Will these fit my Werner / Louisville ladder stabilizer? These caps are designed for AC78 and AC76 stabilizer models. If your Werner, Louisville, or other brand stabilizer is the AC78 or AC76 model, they will fit perfectly. For other stabilizer models, please measure the outer arm diameter and verify before ordering. How do I install the rubber end caps? Installation is extremely simple: clean any dirt or debris from the stabilizer arm ends, then push each cap firmly onto the arm until it seats completely. The tight fit ensures they stay in place during normal use. No tools or adhesives required. Can these caps be used on both indoor and outdoor ladders? Yes. The high-quality rubber construction is suitable for both indoor surface protection (painted walls, drywall) and outdoor use (siding, brick, gutters). The material resists UV degradation and weather exposure. How long do these rubber end caps typically last? With normal use, these caps can last several years. Lifespan depends on frequency of use, storage conditions, and surface types contacted. Inspect caps before each use and replace if you notice cracking, hardening, or looseness.

Read more less

iFJF 2-Inch Hi-Temp Union Kit – Compatible with WhisperFlo & IntelliFlo Pool Pumps (2-Pack) Replace worn or leaking pump unions with this professional-grade 2-inch hi-temp union kit from iFJF. Precision-machined to 21063-200-000 specifications, these unions provide a leak-free connection for all WhisperFlo and IntelliFlo pool pump models. Key Features Hi-Temp Rated: Engineered to withstand the elevated temperatures generated by high-horsepower pool pumps without warping or leaking Precision Fit: 2-inch MIP (Male Iron Pipe) x 2-inch PVC slip connection – exact replacement for OEM part 21063-200-000 Universal Compatibility: Fits ALL WhisperFlo and IntelliFlo pump models, both single-speed and variable-speed 2-Pack: Includes two complete unions, enough for both the inlet and outlet sides of your pump O-Ring Included: Each union comes with a high-quality O-ring for a reliable, drip-free seal Easy Installation: Threaded collar design allows quick pump removal for servicing without cutting plumbing Compatibility All Pentair WhisperFlo pool pumps (single-speed & dual-speed) All Pentair IntelliFlo variable-speed pool pumps Replaces OEM part number: 21063-200-000 Any 2-inch MIP threaded pump connection requiring 2-inch PVC slip unions Specifications Part Number: iFJF 21063-200-000 Replacement Connection: 2-inch MIP Threaded x 2-inch PVC Slip Material: High-Temperature PVC Package: 2 Unions (Complete Set with O-Rings) Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

iFJF 270067 2-Inch Top Valve Assembly – HiFlow Multiport Valve Replacement Restore full functionality to your pool or spa filtration system with this precision-engineered 2-inch top valve assembly from iFJF. Designed as a direct replacement for HiFlow top-mount and side-mount multiport valves, this assembly ensures smooth operation across all valve positions. Key Features Direct Replacement: Engineered to 270067 specifications for HiFlow top-mount and side-mount multiport valves 2-Inch Ports: Full 2-inch internal porting for maximum flow rates with minimal restriction Complete Assembly: Includes all necessary components for a full top valve replacement – no piecing together individual parts Smooth Operation: Precision-machined components ensure easy rotation between filter, backwash, rinse, waste, recirculate, and closed positions Leak-Free Design: Integrated sealing surfaces and gasket system prevent bypass and external leaks Compatibility HiFlow top-mount multiport valves (pool & spa) HiFlow side-mount multiport valves (pool & spa) Replaces part number: 270067 2-inch plumbing connections Specifications Part Number: iFJF-270067 Replacement Port Size: 2 Inch Mount Type: Top Mount / Side Mount Compatible Application: Pool & Spa Multiport Valves (HiFlow Systems) Valve Positions: Filter, Backwash, Rinse, Waste, Recirculate, Closed Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

iFJF 1.25-Inch Accessory Hose – Intex Above Ground Pool Pump Replacement (2-Pack) Keep your Intex above ground pool running smoothly with this premium 2-pack of 1.25-inch accessory hoses from iFJF. Designed as a direct replacement for Intex pool pump connection hoses, these durable hoses ensure reliable water flow throughout the swimming season. Key Features Direct Replacement: Designed to fit Intex 1.25-inch above ground pool pump connections without adapters 2-Pack Value: Two hoses included – cover both inlet and outlet pump connections in one purchase Flexible & Durable: Made from heavy-duty, UV-resistant material that stays flexible in varying temperatures Leak-Free Fit: Precision-molded ends ensure a secure, watertight connection to pump fittings Easy Installation: Simple push-on design – no clamps or special tools needed for most Intex setups Compatibility Compatible with Intex above ground pool pumps using 1.25-inch hose connections. Fits most Intex filter pump models, saltwater systems, and sand filter pumps with standard 1.25-inch fittings. Specifications Package: 2-Pack Hose Diameter: 1.25 inches (Inner Diameter) Application: Intex Above Ground Pool Pump Replacement Material: Heavy-duty UV-resistant polymer Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

Protect Your Diesel Engine with iFJF FS1098 Fuel/Water Separator Water contamination is one of the biggest threats to modern diesel fuel systems. Even small amounts of water can cause injector damage, corrosion, microbial growth, and catastrophic fuel system failure. The iFJF FS1098 Fuel/Water Separator with PCV Valve is designed to remove water and contaminants from diesel fuel before they reach your engine's sensitive high-pressure injection components. This filter is a direct replacement for B6.7, ISB6.7/QSB6.7, ISL8.9, and L9 Series Diesel Engines, providing OEM-equivalent filtration performance. Each 2-pack delivers the protection you need for routine service intervals without paying dealership markups. Please fill the filter with fuel before installation. Note: For off-road and commercial diesel applications. Verify compatibility with your specific engine configuration before ordering. Key Features FS1098 Fuel/Water Separator PCV Valve: Specifically engineered for B6.7, ISB6.7/QSB6.7, ISL8.9, and L9 Series Diesel Engines. Direct OEM-spec replacement that installs without modifications. Complete Cross-Reference: Replaces OEM part numbers 5319680, FS1098, and 5308722. Also serves as a replacement element for FH21462 filter housings. Hydraulic Spin-On Design: These hydraulic spin-on filters are designed for best filtration efficiency, with a robust canister that withstands high fuel system pressures and vibration. Advanced Filtration Technology: Fuel filters deliver best-in-class quality using StrataPore and NanoNet technology, providing multi-layer filtration that captures water droplets, dirt, rust, and microbial contaminants down to the micron level. Integrated PCV Valve: Built-in pressure control valve maintains optimal fuel system pressure and prevents air locks after filter replacement. 2-Pack Value: Each package includes two complete fuel/water separator filters, covering two service intervals and saving you money compared to buying individually. Technical Specifications Specification Detail Product Type Fuel/Water Separator Filter with PCV Valve Filter Model FS1098 OEM Part Numbers 5319680, 5308722 Cross-Reference FH21462 Element Replacement Filter Type Hydraulic Spin-On Technology StrataPore / NanoNet Multi-Layer Media Package Quantity 2 Filters (Pack of 2) Brand iFJF Engine Compatibility Engine Series Engine Model Application Notes B6.7 Cummins B6.7 Agricultural, Construction, Marine ISB6.7 / QSB6.7 Cummins ISB / QSB 6.7L Dodge Ram 2500/3500 (2007+), Medium-Duty Trucks ISL8.9 Cummins ISL 8.9L Motorcoach, RV, Fire Truck, Heavy-Duty Applications L9 Cummins L9 Commercial Trucks, Bus, Industrial Power Compatible with vehicles and equipment using Cummins B6.7, ISB6.7, QSB6.7, ISL8.9, and L9 diesel engine platforms. Common applications include Dodge Ram 2500/3500 diesel trucks (2007+), Freightliner M2, International DuraStar, motorhomes, and agricultural/construction equipment. Always verify filter housing compatibility before ordering. Installation Instructions Safety First: Park on level ground, engage parking brake, and allow engine to cool. Wear safety glasses and gloves. Relieve Pressure: Locate the fuel filter housing and follow your vehicle's procedure to relieve fuel system pressure. Remove Old Filter: Place a drain pan underneath. Using an appropriate filter wrench, spin the old filter counterclockwise to remove it. Clean Sealing Surface: Wipe the filter housing mounting surface clean with a lint-free cloth. Inspect for damage or old gasket material. Pre-Fill New Filter: Fill the new FS1098 filter with clean diesel fuel before installation to minimize engine cranking time and protect the injection pump. Lubricate Gasket: Apply a thin film of clean diesel fuel to the new filter gasket to ensure proper sealing. Install New Filter: Spin the new filter onto the housing by hand until the gasket contacts the mounting surface, then tighten an additional 3/4 to 1 turn per manufacturer specification. Prime the System: Follow your vehicle's fuel system priming procedure (manual primer pump or key-cycle method). Check for Leaks: Start the engine and inspect the filter seal area for any fuel leakage. Retighten if necessary. Frequently Asked Questions What happens if I don't replace my fuel/water separator regularly? A clogged or water-saturated filter can restrict fuel flow, causing hard starts, power loss, and stalling. Water that bypasses a saturated filter can damage high-pressure injectors and the common rail system—repairs that can cost thousands of dollars. Regular replacement is the cheapest insurance for your diesel engine. Will this fit my Dodge Ram 2500 with the 6.7L Cummins? Yes, the FS1098 is compatible with 2007 and newer Dodge Ram 2500 and 3500 trucks equipped with the 6.7L Cummins ISB engine, provided your filter housing accepts the FS1098 cartridge. Always verify by cross-referencing your existing filter number. Do I really need to pre-fill the filter with fuel? Yes. Pre-filling the filter with clean diesel fuel significantly reduces cranking time needed to prime the system, protects the high-pressure fuel pump from running dry, and prevents air from entering the injection system. Never install a dry fuel filter on a diesel engine. How often should I replace the fuel/water separator? Most manufacturers recommend replacement every 15,000 to 30,000 miles or every other oil change, but this varies by vehicle usage. Heavy towing, dusty conditions, and poor-quality fuel can shorten filter life. Drain the water separator bowl at every oil change and replace the filter element when it shows signs of restriction. What is the difference between a fuel filter and a fuel/water separator? A standard fuel filter removes solid contaminants (dirt, rust, debris). A fuel/water separator goes further by using specialized media that causes water droplets to coalesce and settle out of the fuel stream. The FS1098 performs both functions with its multi-layer StrataPore/NanoNet media.

Read more less

Stop Vacuum Pump Oil Leaks with iFJF Complete Rebuild Kit The 2.0T FSI engine is legendary among VW and Audi enthusiasts, but its vacuum pump is a well-known weak point. Over time, the factory seals harden, shrink, and fail—leading to oil leaks that drip onto the transmission, create burning oil smells, and in severe cases cause brake booster vacuum loss. Replacing the entire vacuum pump assembly can cost hundreds of dollars, but in most cases only the gaskets and seals need replacement. The iFJF 2.0T Vacuum Pump Rebuild Kit includes every gasket and seal required for a complete vacuum pump overhaul, made from high-temperature-resistant and wear-resistant rubber material to ensure long-term stable operation. Even under high pressure or high flow conditions, these seals maintain pump integrity, prevent oil leakage, and block external impurities from entering the pump. Timely replacement of worn sealing rings can prevent sudden failures, ensure continuous pump operation, and avoid replacing the entire pump—significantly reducing maintenance costs. Key Features Complete Rebuild Kit: Includes all gaskets, O-rings, and seals needed for a full vacuum pump overhaul—no need to source individual parts from multiple suppliers. Replaces 06D145100H, 06D145100E, 06D145117, 06D145100H, 06D145100E, 06D145117. High-Temperature Elite Rubber: Manufactured from premium rubber compound that resists temperatures well beyond normal engine bay conditions. Unlike cheap silicone alternatives, our material maintains elasticity and sealing pressure over years of heat cycling. High-Pressure Leak-Proof Design: Excellent sealing performance even under high pressure or high flow conditions. Prevents oil from seeping past seals and keeps external contaminants from entering the pump. Perfect OEM Fit: All seals are precision-cut to match factory dimensions. The perfect fit ensures a hassle-free repair process, saving both labor and parts costs. Preventative Maintenance Savings: Timely replacement of worn sealing rings prevents sudden pump failures, ensures continuous operation, and eliminates the need to replace the entire pump assembly—dramatically reducing maintenance costs compared to dealership service. Easy DIY Installation: This kit is designed with the home mechanic in mind. Clear seal organization and perfect fitment make the rebuild process straightforward with basic hand tools. Technical Specifications Specification Detail Product Type Vacuum Pump Rebuild Gasket Seal Kit Material High-Temperature-Resistant & Wear-Resistant Rubber OEM Part Numbers 06D145100H, 06D145100E, 06D145117 Engine Compatibility 2.0T FSI VAG Engine (BPY, BWA, BYD, CDL, etc.) Seal Types Included Cover Gasket, Internal O-Rings, Shaft Seals Brand iFJF Compatible Models The iFJF vacuum pump rebuild kit is designed for 2.0T FSI engine applications across the VW and Audi lineup. The complete compatible model list from our product description is below—please verify your specific year and engine code: Make Model Year Range Engine VW Jetta 2005 – 2008.5 2.0T FSI VW GTI 2005 – 2008.5 2.0T FSI VW GLI 2005 – 2008.5 2.0T FSI VW Passat 2005 – 2008.5 2.0T FSI VW Golf R 2012 – 2013 2.0T FSI Audi A3 2005 – 2008.5 2.0T FSI Audi A4 2005 – 2008.5 2.0T FSI Audi S3 2006 – 2013 2.0T FSI Audi TT 2005 – 2008.5 2.0T FSI Audi TTS 2009 – 2013 2.0T FSI Compatible models per product description: Jetta 2005 - 2008.5 2.0t FSI, GTI 2005 - 2008.5 2.0t FSI, GLI 2005 - 2008.5 2.0t FSI, Passat 2005 - 2008.5 2.0t FSI, Golf R 2012 - 2013 2.0t FSI, A3 2005 - 2008.5 2.0t FSI, A4 2005 - 2008.5 2.0t FSI, S3 2006 - 2013 2.0t FSI, TT 2005 - 2008.5 2.0t FSI, TTS 2009 - 2013 2.0t FSI. Also commonly fits B6 Passat, MK5 Jetta/GTI/GLI (A5 platform), B7 Audi A4 (8E chassis), 8P Audi A3, and MK2 Audi TT/TTS with the 2.0T FSI engine (engine codes BPY, BWA, BYD, CDL, CDLF). The vacuum pump rebuild gasket seal kit is a compatible replacement for 2.0T MKv, B6, 8P, B7 gasket applications covering 2005-2008.5 VW Jetta GTI GLI A3 A4 S3 Passat Golf R. Signs Your Vacuum Pump Seals Are Failing Oil Leaks on Transmission: The most obvious symptom—oil dripping from the vacuum pump area onto the transmission housing. Burning Oil Smell: Oil leaking onto hot engine or exhaust components creates a noticeable burnt oil odor in the cabin. Hard Brake Pedal: Loss of vacuum to the brake booster can cause a stiff brake pedal, especially noticeable during cold starts. Hissing Noise: A vacuum leak from degraded seals may produce an audible hissing sound near the vacuum pump. Check Engine Light: Vacuum system faults can trigger diagnostic trouble codes related to brake booster or emissions system performance. Frequently Asked Questions Do I need to replace the entire vacuum pump or just the seals? In the vast majority of cases, only the gaskets and seals need replacement. The pump body itself rarely fails—it is almost always the rubber seals that harden and leak over time. This rebuild kit replaces all wearable seals for a fraction of the cost of a new pump assembly. Will this kit fit my 2007 VW GTI with the 2.0T FSI (BPY engine)? Yes, this kit is specifically designed for the 2005-2008.5 VW GTI with the BPY 2.0T FSI engine. It replaces OE part numbers 06D145100H, 06D145100E, and 06D145117. How difficult is the vacuum pump rebuild? This is an intermediate-level DIY job. The vacuum pump is accessible from the top of the engine on most transverse-mounted 2.0T FSI engines. Basic hand tools, a clean workspace, and attention to seal orientation are all that is needed. Most experienced DIYers complete the job in 1-2 hours. What happens if I don't fix a leaking vacuum pump? Beyond the oil leak damaging other components and creating a fire risk, a severe vacuum leak can compromise brake booster performance, resulting in reduced braking assist. This is a safety concern that should be addressed promptly. Does this kit include the vacuum pump gasket as well as internal seals? Yes, the complete rebuild kit includes all the gaskets, O-rings, and seals needed for a full vacuum pump overhaul—both the external housing gasket that seals against the cylinder head and all internal seals that prevent internal oil bypass.

Read more less

Fitment: Fuel filter Housing Cap for GM Duramax 6.6L L5P 2017-2020(Chevy Silverado/GMC Sierra 2500HD 3500HD),Cruze 2014-2015 2.0L,Cruze 2017-2019 1.6L. Replaces part number:134001. Material: Made of CNC Billet 6061-T6 Aluminum, more durable and longer using time than OEM cap. Advantage: This housing is engineered and manufactured to fit and function like the factory housing (while being much stronger),Won't easily to be cracked when installing/removing. Package includes:1 x fuel filter housing cap(Do not include O-ring),1 x drain plug.       Housing cover Our housing cap is carefully crafted with CNC billeted aluminum for longer-lasting durability and reliability.Your standard plastic cap would be easily cracked when over tightened or long term used.You can simply remove your old cap and screw your new cap on its place using a 1-7/16" socket wrench.Grooves on the side for easy removal and installation. Product Features & Specifications 🚗 Exact Fitment Compatible with GM Duramax 6.6L L5P 2017-2020 (Chevy Silverado / GMC Sierra 2500HD 3500HD). Also fits Cruze 2014-2015 2.0L and Cruze 2017-2019 1.6L. Direct replacement for OEM part number 134001 — no modifications required. 🔩 Upgraded Stainless Steel Drain Plug Equipped with a premium stainless steel drain plug that outperforms common aluminum plugs in corrosion resistance and longevity. Zero rust concerns, reliable draining every time. Lifetime warranty included on the drain plug screw accessory. 🛠️ CNC Billet 6061-T6 Aluminum Construction Precision-machined from aerospace-grade 6061-T6 billet aluminum — significantly tougher than the OEM plastic cap. Engineered to withstand repeated installation and removal cycles without cracking, stripping, or warping under high-heat diesel engine conditions. 📦 Package Contents 1 × Fuel Filter Housing Cap (O-ring not included) 1 × Stainless Steel Drain Plug ✅ iFJF Quality Promise Every cap undergoes precision machining and rigorous fitment testing before leaving the factory. We stand behind our manufacturing — if it doesn't fit perfectly, we'll make it right. ⚙️ Why Upgrade from OEM? The factory plastic housing cap is a known weak point on the L5P Duramax — prone to cracking during routine filter changes. Our billet aluminum replacement eliminates this failure point permanently while adding the convenience of a tool-free drain plug for mess-free oil changes.

Read more less

24 Sq.ft Pool & Spa Filter Grille Assembly — 59023800 Replacement Product Overview Restore your pool filter's performance with this iFJF 24-square-foot filter grille assembly. Precision-engineered to replace DEX2420DC, DEX2400DA, and 59023800 filter grids — a direct drop-in replacement for DE and cartridge-style pool and spa filter systems. Key Features Perfect OEM Fit: Designed to match the exact dimensions and mounting configuration of the original 59023800 / DEX2420DC / DEX2400DA grid assembly — no modifications needed. Efficient Filtration: Precision-woven filter mesh captures fine particles, debris, and contaminants down to micron-level, keeping pool water crystal clear. Heavy-Duty Construction: Reinforced plastic frame with high-quality filter fabric that resists tearing, chemical degradation, and pressure fatigue. Extended Service Life: Manufactured to meet or exceed OEM durability standards — replace your old, clogged grids and see immediate improvement in water clarity and pump efficiency. Easy Swap: Direct replacement — remove the old grille assembly and drop in the new one. No plumbing changes or adapters required. Specifications Filter Area: 24 Square Feet Part Numbers: 59023800, DEX2420DC, DEX2400DA Material: Plastic frame + woven filter fabric Application: DE and cartridge pool/spa filter systems Compatibility: 24 sq.ft pool and spa filter models FAQ Q: How do I know if this fits my filter?A: Check your filter housing label or manual for 24 sq.ft capacity and reference part numbers 59023800, DEX2420DC, or DEX2400DA. Q: How often should I replace the filter grille?A: Typically every 3-5 years depending on usage and water chemistry. Replace sooner if you notice reduced water flow, frequent backwashing, or visible damage to the filter fabric. Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net Why Choose the ACA 59023800 Grid Assembly? ✅ Complete Replacement Solution Everything you need in one box — full grid assembly including air bleed pipe. Seamlessly replaces parts DEX2420DC and DEX2400DA. Compatible with 24 sq. ft. DE filters including FNS24 and FNSP24 models. No hunting for missing components — install with confidence. ✅ Air Bleed Assembly — Up to 30% Better Filtration Traditional filter grids often trap air pockets that reduce effective filtration area. Our integrated air bleed assembly eliminates trapped air, delivering up to 30% improved filtration efficiency. Cleaner water with fewer chemical adjustments. ✅ Premium Corrosion-Resistant Materials Manufactured with high-strength, corrosion-resistant materials engineered to withstand harsh pool chemical environments season after season. No premature rust, no degraded plastic — just reliable performance. ✅ Easy 30-Minute DIY Installation No professional tools or expensive service calls required. The complete assembly drops right in — most pool owners complete the swap in under 30 minutes. Save hundreds on technician fees while keeping your filter running at peak performance. ✅ Extend Grid Life by 50% or More Follow our seasonal maintenance tips included with your purchase and you can double the service life of your grid assembly. Simple cleaning routines that pay for themselves in avoided replacements.

Read more less

iFJF 25010 Plunger Valve & 11872 Dual Split Hose Connector – Above Ground Pool Setup This essential combination kit from iFJF pairs the widely-used 25010 plunger valve with the 11872 dual split hose connector, providing a complete solution for above ground pool plumbing and sand filter pump connections. Designed to work seamlessly with the 25080RP system. Key Features Complete Assembly: Includes both the 25010 plunger valve and 11872 dual split hose connector in one convenient kit 25010 Plunger Valve: Provides reliable push-pull shut-off control for quick water flow management during maintenance 11872 Dual Split Connector: Allows you to split a single hose line into two connections – ideal for complex above ground pool setups 25080RP Compatible: Engineered to work with standard 25080RP above ground pool systems Durable Materials: UV-stabilized and chemical-resistant construction for long-lasting outdoor performance Compatibility Above ground pool setups using 25010 plunger valve configurations Pool sand filter pumps requiring 25080RP-compatible connections Standard above ground pool plumbing with split hose requirements Specifications Components: 25010 Plunger Valve + 11872 Dual Split Hose Connector System Compatibility: 25080RP Above Ground Pool Systems Application: Above Ground Pool Setup & Sand Filter Pump Connections Type: Hose Connector & Plunger Valve Assembly Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less

iFJF 25010 Plunger Valve Hose Connector Assembly – Above Ground Pool & Sand Filter Pump The iFJF 25010 plunger valve hose connector assembly is a precision-engineered replacement for above ground pool plumbing systems. Compatible with 25080RP, 10747, and standard 25010 configurations, this assembly provides reliable flow control and secure hose connections. Key Features Multi-Model Compatible: Designed to replace OEM parts 25080RP, 10747, and 25010 in above ground pool systems Integrated Plunger Assembly: Complete plunger valve and hose connector in one unit – simplifies installation and reduces leak points Smooth Plunger Action: Easy push-pull operation for instant water shut-off during filter maintenance or winterizing Secure Connection: Engineered to maintain a tight, leak-free seal even under pump pressure Durable Construction: Manufactured from impact-resistant, UV-stabilized materials for season-after-season reliability Compatibility Above ground pool setups requiring 25010 plunger valve assemblies Pool sand filter pump systems using 25080RP or 10747 connections Standard above ground pool plumbing needing replacement plunger/hose connector assemblies Specifications Part Numbers Compatible: 25010, 25080RP, 10747 Type: Plunger Valve Hose Connector Assembly Application: Above Ground Pool Setup & Sand Filter Pump Material: Impact-resistant, UV-stabilized polymer Factory Direct Supply -- iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net

Read more less