Description
Product Overview
Complete diving board mounting bolt kit for two-hole residential pool diving boards. DB-TB-M compatible kit includes marine-grade 304 stainless steel bolts, nylon lock nuts, heavy-duty flat washers, and UV-resistant white bolt covers. Engineered for continuous pool chemical exposure, intense UV, and dynamic diving board loads season after season.
Key Features
-
Marine-Grade 304 Stainless — Bolts, lock nuts, and washers resist chlorine, salt, and chemical corrosion for permanent underwater installation.
-
UV-Resistant White Covers — Molded polymer bolt covers maintain bright white appearance without yellowing or cracking in sunlight.
-
Complete All-Inclusive Kit — Everything needed: 2 bolts, 2 lock nuts, 4 washers, 2 decorative covers. No separate hardware store trips.
-
Two-Hole Board Compatible — Standard two-hole residential pattern fits SR Smith, Inter-Fab, and most aftermarket diving boards.
-
Easy DIY Installation — All hardware included with instructions. Typical installation 30–45 minutes with basic socket set.
Compatibility
| Make |
Model |
Year Range |
Notes |
| Universal |
Two-Hole Residential Diving Boards |
Standard |
6"/8"/10" Board Sizes |
| SR Smith |
Residential Diving Boards |
All Models |
Two-Hole Mount Pattern |
| Inter-Fab |
Residential Diving Boards |
All Models |
Two-Hole Mount Pattern |
Specifications
| Specification |
Value |
| Bolt & Nut Material |
304 Marine-Grade Stainless Steel |
| Cover Material |
UV-Resistant Molded Polymer |
| Cover Color |
White |
| Mounting Pattern |
Two-Hole Standard (Residential) |
| Kit Contents |
2 Bolts + 2 Lock Nuts + 4 Washers + 2 Covers |
Frequently Asked Questions
Q: What's included in the kit?
A: Two 304 SS mounting bolts, two nylon lock nuts, four flat washers, and two white decorative bolt covers — everything for one board.
Q: Will this fit my diving board?
A: Fits standard two-hole residential boards from SR Smith, Inter-Fab, and most brands. Contact us with your board specs if unsure.
Q: Will the hardware rust?
A: No. 304 marine-grade stainless steel is specifically chosen for continuous pool water and chemical exposure.
Q: How do I install it?
A: Remove old hardware, align board, insert bolts from top, secure with washers and lock nuts below, snap on covers. 30–45 minutes.
Q: When should I replace mounting hardware?
A: Replace if you see rust, pitting, or corrosion — or if the board feels loose. Annual safety inspection recommended.
Related Products
