Description
Product Overview
The iFJF Differential Carrier Bearing Puller Kit is a professional-grade tool designed for removing carrier and pinion bearings from Dana 30, 44, 50, 60, 70, and 80 axles. With an extra-large clamshell design that accommodates differentials from 8 to 9.5 inches, this kit handles everything from Jeep TJ axles to heavy-duty Ram and Ford truck differentials. Essential for any gear swap, locker installation, or bearing replacement job.
Key Features
-
Wide Dana Compatibility: Fits Dana 30, 35, 40, 44, 50, 60, 70, and 80 differentials with the extra-large clamshell — covering the most common Dana axles in one complete kit.
-
Heavy-Duty Forged Steel: Heat-treated forged steel components withstand the extreme forces required to pull stubborn pressed-on bearings without deforming or slipping.
-
Extra-Large Clamshell Design: Adjustable clamshell accommodates differentials from 8-inch up to 9.5-inch diameters — handles everything from Jeep to heavy-duty truck carriers.
-
Complete Bearing Puller Kit: Includes clamshell puller body, heavy-duty forcing screw, and adapter plates — everything needed for both carrier and pinion bearing removal.
-
Safe, Controlled Operation: Pulls bearings straight off the carrier without scoring journals or damaging the carrier surface — far safer and more precise than hammer-and-chisel methods.
Compatibility
| Axle |
Ring Gear Size |
Common Vehicles |
| Dana 30 |
7.1 in |
Jeep Wrangler TJ/JK/JL (front), XJ Cherokee |
| Dana 44 |
8.5 in / 8.9 in |
Jeep Wrangler, Ford Bronco, Chevy K1500, Ram 1500 |
| Dana 60 |
9.75 in |
Ford F-250/350, Ram 2500/3500, Chevy 2500 |
| Dana 70/80 |
10.5 in / 11.25 in |
Ram 3500 DRW, Ford F-350 DRW, GM 3500HD |
Note: Clamshell fits Dana 80 differential carrier. Dana 80 pinion bearing requires a separate adapter (not included).
Specifications
| Specification |
Details |
| Model Number |
BPT-P22 |
| Material |
Forged & Heat-Treated Steel |
| Clamshell Range |
8 in to 9.5 in Differential Diameter |
| Axle Coverage |
Dana 30, 35, 40, 44, 50, 60, 70, 80 |
Why Choose iFJF
Gear setup is precision work — the last thing you need is a bearing puller that slips, damages journals, or requires three hands to operate. The iFJF BPT-P22 is built for both the professional mechanic who pulls carriers regularly and the serious DIY builder doing a one-time re-gear. CNC-machined forcing screw threads ensure smooth, controlled pulling force. 90-day satisfaction guarantee.
Frequently Asked Questions
Q: Will this pull the pinion bearing on my Dana 60?
A: Yes. This kit handles pinion bearings on Dana 30 through Dana 70. The clamshell grips the bearing securely without damaging the pinion shaft. Note: Dana 80 pinion bearings require a different adapter size.
Q: Can I use this on a Ford 9-inch differential?
A: This kit is designed for Dana differentials. The Ford 9-inch uses a dropout third member with different bearing dimensions. While it may work on some 9-inch carriers, it is not specifically designed for them.
Q: Do I need a shop press?
A: No shop press required. The forcing screw mechanism generates sufficient force to pull press-fit bearings by hand using a 1/2-inch drive ratchet or breaker bar. An impact wrench can be used for stubborn bearings on Dana 60 and larger axles.
Q: Is this tool reusable?
A: Absolutely. This is a professional-grade reusable tool built to last through hundreds of bearing pulls. Clean and lightly oil the forcing screw threads after each use for maximum longevity.
Related Products
Explore more from our full catalog. iFJF Direct offers thousands of quality replacement parts, tools, and accessories for your vehicle.
