Description
Door Hinge Bushing Rebuild Kit for 2007–2018 Jeep Wrangler JK & JKU (4-Pack)
Restore your Wrangler's door operation with this complete hinge bushing rebuild kit. Over time, the factory door hinge bushings on 2007–2018 Jeep Wrangler JK and JKU models wear down, causing sagging doors, annoying rattles, and difficulty closing. This 4-piece kit includes everything you need to replace worn hinge liners and nuts on all four doors of your Wrangler Unlimited — or both doors on a 2-door JK.
Each component is crafted from high-grade stainless steel with a durable black powder coat finish, offering superior corrosion resistance against rain, mud, snow, and salt. The included CNC-machined bushing removal tool makes replacing old, seized bushings quick and damage-free — no need to hammer or pry against your door paint.
Key Features
-
Complete 4-Door Kit — Includes stainless bushing removal tool, replacement hinge liner pins, and hinge nuts for all 4 doors on Wrangler Unlimited JKU (also fits 2-door JK with spares)
-
Fixes Door Sag & Rattle — Eliminates the common JK door slop, wind noise, and squeaking caused by worn factory plastic bushings
-
Stainless Steel Construction — 304 stainless steel with black powder coating resists rust and corrosion even after years of off-road exposure
-
Precision CNC Machined Tool — Safe, controlled bushing removal without scratching door paint or bending hinge brackets
-
OEM-Spec Fit — Direct drop-in replacement for factory hinge hardware; no drilling or modification required
-
DIY-Friendly Installation — Average install time 30–45 minutes per door with basic hand tools
Compatibility
| Year |
Make |
Model |
Doors |
| 2007–2018 |
Jeep |
Wrangler JK |
2-Door |
| 2007–2018 |
Jeep |
Wrangler JKU |
4-Door Unlimited |
Specifications
| Component |
Material |
Finish |
| Bushing Removal Tool |
304 Stainless Steel |
CNC Machined |
| Hinge Liner Pins |
304 Stainless Steel |
Black Powder Coat |
| Hinge Nuts |
304 Stainless Steel |
Black Powder Coat |
| Quantity |
4-Door Kit (8 liners + 8 nuts + 1 tool) |
Why Choose iFJF Door Hinge Kit
Factory Jeep JK door hinge bushings are plastic — they crack, degrade, and ovalize over time. Once the bushing wears, your door drops slightly, causing wind leaks, body panel misalignment, and that signature JK rattle. Our stainless steel kit permanently solves this with precision-machined replacements that won't deform under load. Combined with the included removal tool, this is the most complete JK door hinge solution on the market.
Installation Tips
- Remove doors completely for easiest access to hinges
- Use the included bushing removal tool to press out old bushings — no hammer required
- Apply a light coat of white lithium grease to new liner pins before installation
- Torque hinge nuts to 18–22 ft-lbs
- Re-hang door and check alignment before final tightening
Note: For JK models with significant hinge bracket wear, inspect hinge pin bores for ovalization before installing new bushings.
Related Products
Frequently Asked Questions
Q: Will this fit my 2015 Jeep Wrangler JK Unlimited?
A: Yes. This kit fits all 2007–2018 Jeep Wrangler JK (2-door) and JKU (4-door Unlimited) models regardless of trim level — Sport, Sahara, Rubicon, or special editions.
Q: How do I know if my door hinge bushings need replacement?
A: Common signs include: doors that sag when opened, require extra force to close, rattle over bumps, or have visible play when you lift the door from the open position. If you can wiggle the door up and down more than 1/8 inch, the bushings are worn.
Q: Is the removal tool safe to use on painted surfaces?
A: Yes. The CNC-machined tool is designed to press bushings out from the inside of the hinge bore without contacting painted door surfaces. Follow the included instructions and use steady, controlled pressure.
Q: Does this come with instructions?
A: Yes, a step-by-step installation guide is included. We also have video tutorials available on our website.
Q: What's the difference between the 4-pack and 8-pack kits?
A: The 4-pack includes hardware for all 4 doors (8 hinge liners + 8 nuts) with one removal tool. The 8-pack doubles the hardware for dual-vehicle owners or spare parts.
Q: Do I need to remove the doors to install?
A: We strongly recommend removing the doors. While it's possible to work with the doors on hinges, door removal gives you full access and allows proper bushing alignment. Two-person lift recommended — JK doors weigh approximately 55 lbs each.
Q: What's your warranty on this kit?
A: All iFJF products include a 12-month warranty against manufacturing defects. Contact support@ifjf.net with your order number for warranty claims.
