Description
Product Overview
The iFJF Driver Side Heated Mirror Glass with Backing Plate is a direct OEM-quality replacement for Ford Transit vans. Replacing OEM part CK4Z17K707D, this complete assembly includes the heated mirror glass pre-attached to the backing plate — no reusing old parts. Restore clear visibility and the factory defrost function in one easy installation.
Key Features
-
Integrated Heating Element — Factory-matched defrost function clears ice and fog. Connects directly to OEM wiring harness — no adapters needed.
-
Complete Assembly — Mirror glass comes pre-mounted to a new backing plate with snap clips. Remove the old unit and snap this one in place.
-
OEM-Quality Glass — Convex glass with the correct field of view. Anti-glare coating reduces headlight glare at night.
-
Direct Fit — Engineered to the exact curvature and dimensions of the factory Transit mirror housing.
-
Plug-and-Play Installation — Two heating element wires and snap-in clips. Done in 10 minutes or less.
Compatibility
| Vehicle |
Position |
Years |
| Ford Transit 150 |
Driver Side (LH) |
2015-2024 |
| Ford Transit 250 |
Driver Side (LH) |
2015-2024 |
| Ford Transit 350 |
Driver Side (LH) |
2015-2024 |
| Ford Transit 350HD |
Driver Side (LH) |
2015-2024 |
Specifications
| Spec |
Value |
| Replaces OEM |
CK4Z17K707D |
| Brand |
iFJF |
| Position |
Driver Side (Left) |
| Glass Type |
Convex with Anti-Glare |
| Heated |
Yes (Integrated Element) |
| Backing Plate |
Included & Pre-Mounted |
Why Choose iFJF
A cracked or non-functioning heated mirror is more than a cosmetic issue — it's a safety hazard. iFJF replacement mirrors match OEM curvature and heating performance so you get clear visibility in all weather conditions. Unlike buying just the glass and struggling to reuse a broken backing plate, our complete assembly saves you time and frustration.
Installation Instructions
-
Position the old mirror — tilt it fully inward (toward the vehicle) to expose the outer edge.
-
Pry off the old glass — use a plastic trim removal tool to pop the snap clips around the perimeter.
-
Disconnect the wiring — gently pull the two heating element spade connectors off the terminals. Note which wire goes where (usually black/black-white).
-
Connect the new mirror — push the wire connectors onto the heating element terminals of the new assembly.
-
Snap into place — align the backing plate clips with the mirror motor housing and press firmly around the entire perimeter until all clips engage.
-
Test — turn on the rear defroster and verify the mirror warms up within 2-3 minutes.
Frequently Asked Questions
Q: Does this mirror have the heating/defrost function?
A: Yes. This replacement mirror glass includes the integrated heating element — just plug in the factory connector. It's designed to clear frost, ice, and fog just like the OEM mirror.
Q: Is the backing plate included?
A: Yes. This listing includes the mirror glass pre-mounted to the backing plate for a true plug-and-play installation. No need to reuse your old backing plate.
Q: How do I replace the mirror glass?
A: Tilt the mirror fully inward to expose the outer edge. Use a plastic trim tool to gently pry the old glass off (it's held by snap clips). Disconnect the two heating wires (note their positions). Connect wires to the new mirror and press firmly until it snaps into place.
Q: Does this fit both driver and passenger sides?
A: This is the DRIVER SIDE (LH) mirror only. It fits the left/driver's side of Ford Transit vans. The passenger side requires a different part number.
Q: Will this fit my 2019 Transit Connect?
A: No — this mirror is for the full-size Ford Transit (150/250/350). The Transit Connect is a different vehicle with different mirrors.
Related Products
