Description
EZGO Front Wheel Hub Assembly — 70895G01 Replacement (2-Pack)
The iFJF 70895G01 front wheel hub assembly is a precision-engineered direct replacement for EZGO golf carts manufactured from 2001.5 and up. Whether you're maintaining a fleet vehicle or restoring your personal cart, these heavy-duty hubs eliminate wobble, grinding, and premature bearing failure caused by worn OEM units.
Key Features
-
Complete Assembly: Each hub comes with bearing races pre-installed — no pressing required
-
2-Pack Value: Includes both driver and passenger side hubs in one kit
-
Heavy-Duty Construction: Forged steel construction with corrosion-resistant finish
-
Precision Fit: CNC-machined to exact EZGO 70895G01 specifications
-
Universal Fitment: Works on both gas and electric EZGO models
-
Lug Studs Included: 4-lug pattern pre-installed, ready to bolt on
Compatibility
| Vehicle |
Year Range |
Engine Type |
| EZGO TXT |
2001.5–2013 |
Gas & Electric |
| EZGO RXV |
2008–2022 |
Gas & Electric |
| EZGO Valor |
2018–2022 |
Gas & Electric |
| EZGO Express S4/L6 |
2013–2022 |
Gas & Electric |
⚠️ NOT compatible with pre-2001.5 EZGO models (Marathon, Medalist, early TXT). For 1979–2001.5 models, use part number 19932G1.
Specifications
| Specification |
Value |
| Part Number |
70895G01 |
| Bolt Pattern |
4 x 4" (4 x 101.6mm) |
| Lug Stud Size |
1/2"-20 |
| Bearing Type |
Tapered roller (pre-installed) |
| Material |
Forged steel |
| Quantity |
2 hubs (left + right) |
| Finish |
Black corrosion-resistant coating |
Why Replace Your Wheel Hubs?
Worn front wheel hubs are one of the most common sources of steering vibration and uneven tire wear on EZGO golf carts. Symptoms include:
- Grinding or humming noise from front wheels while driving
- Steering wheel wobble or vibration at speed
- Uneven front tire wear patterns
- Excessive play when rocking the tire at 12 and 6 o'clock positions
- Loose-feeling steering response
Installation Overview
This is a bolt-on replacement requiring basic mechanical skills. Typical installation time is 30–45 minutes per side with standard hand tools. No bearing press required — the races come pre-installed in each hub assembly.
- Jack up the front of the cart and secure with jack stands
- Remove the front wheel (4 lug nuts)
- Remove the cotter pin, castle nut, and washer from the spindle
- Slide the old hub assembly off the spindle
- Clean the spindle surface and apply fresh grease
- Slide the new 70895G01 hub onto the spindle
- Install the washer and castle nut, torque to spec
- Insert a new cotter pin and reinstall the wheel
Pro Tip: Always replace both sides at the same time for even wear and consistent handling.
Frequently Asked Questions
Q: Will this fit my 2008 EZGO RXV?
A: Yes! The 70895G01 hub fits all EZGO RXV models from 2008 to 2022, both gas and electric.
Q: Are the bearings already pressed in?
A: Yes, each hub assembly comes with tapered roller bearing races pre-installed from the factory. No press needed.
Q: What's the difference between 70895G01 and 19932G1?
A: The 70895G01 fits 2001.5 and newer EZGO models, while the 19932G1 fits 1979–2001.5 EZGO models. Check your cart's year before ordering.
Q: Do I need to replace the inner seals too?
A: The inner bearing seals are not included in this hub assembly kit. If your seals are worn, we recommend replacing them at the same time (sold separately).
Q: Does this include lug nuts?
A: No, lug nuts are not included. The hub comes with lug studs pre-installed — reuse your existing lug nuts.
Q: How long do these hubs typically last?
A: With proper bearing lubrication and normal golf course use, these forged steel hubs typically last 3–5 years or more before needing replacement.
Related Products & Resources
