Description
Pull-Down Kitchen Faucet Hose Kit — Moen 150259 Replacement
The iFJF Pull-Down Kitchen Faucet Hose Kit is a direct replacement for the Moen 150259 pull-down sprayer hose found in most Moen single-handle kitchen faucets. When your spray head hose starts leaking, kinking, or losing pressure, this OEM-spec replacement restores full water flow and spray head retraction in minutes — no plumber required.
Compatible Moen Faucets
| Faucet Series |
Models |
| Moen Arbor |
7594, 7594C, 7594SRS, 7594BL |
| Moen Brantford |
7185, 7185C, 7185SRS |
| Moen Sleek |
7864, 7864SRS |
| Moen Align |
5923, 5923SRS |
| Moen Wave |
87910, 87910SRS |
| Other Moen |
Most Moen single-handle pull-down kitchen faucets using Hose 150259 |
Key Features
-
OEM-Spec Moen 150259 Replacement — Matches the original Moen hose in length, thread pattern, and quick-connect fitting
-
Stainless Steel Braided Exterior — Durable braided jacket resists kinking and protects the inner hose from wear
-
Quick-Connect End Fittings — Snap-in connectors on both ends for tool-free installation in under 5 minutes
-
Full Water Flow Restoration — Internal diameter optimized for Moen faucet flow rates; say goodbye to weak sprayer pressure
-
Universal Counterweight Compatibility — Works with your existing Moen counterweight for smooth spray head retraction
Signs Your Hose Needs Replacement
- Water leaking from the braided hose jacket
- Spray head won't retract or is slow to retract
- Reduced water pressure from the spray head (while main faucet flow is fine)
- Visible cracks, bulges, or wear on the hose exterior
- Quick-connect fitting won't stay snapped together
FAQ
Q: Will this fit my Moen [model number] faucet?
A: This hose is compatible with most Moen single-handle pull-down kitchen faucets that use the 150259 hose assembly. Popular matches include the Arbor (7594), Brantford (7185), Sleek (7864), Align (5923), and Wave (87910) series.
Q: How do I install this hose?
A: Installation takes about 5 minutes: (1) Turn off water supply, (2) Unscrew the spray head from the old hose, (3) Disconnect the quick-connect fitting under the sink, (4) Attach the new hose at both ends, (5) Screw the spray head back on, (6) Turn water back on and test.
Q: Does this include the spray head?
A: No — this is the replacement HOSE only. The spray head (the handheld piece) is not included and must be re-used from your existing faucet or purchased separately.
Q: Can I use this on a non-Moen faucet?
A: This hose is designed specifically for Moen faucets with the 150259 quick-connect fitting. It may not fit other brands like Delta, Kohler, or Pfister without adapters.
Q: How long is this replacement hose?
A: Approximately 60 inches (5 feet), matching the original Moen 150259 hose length for proper reach and spray head retraction.
