Description
Stay Cool & Protected — Jeep Wrangler JL Mesh Sunshade
Turn your open-air Wrangler into a comfortable, sun-safe ride with the iFJF Roof Top Mesh Sunshade. Designed specifically for 2018-2022 Jeep Wrangler JL and JLU models, this sunshade blocks up to 90% of harmful UV rays while cutting down wind noise at highway speeds — all for an unbeatable $33.99. Whether you are crawling Moab trails, cruising the freeway, or parked at a campsite, this shade keeps you and your interior protected without sacrificing the open-top experience.
Key Features
-
☀️ Superior UV Protection — High-density mesh blocks up to 90% of the suns rays, shielding passengers from UV exposure and preventing interior fade, cracking, and heat buildup.
-
🌬️ Wind Noise Reduction — The tight-weave mesh dampens wind buffeting and turbulence at highway speeds, so you can hold a conversation without shouting.
-
💨 Breathable Mesh Design — Unlike solid tops, the open-weave construction lets air flow through freely, keeping the cabin ventilated while still providing shade. No greenhouse effect.
-
👜 Compact and Easy to Store — Folds down small enough to stash in your cargo area, under a seat, or in the trunk. Take it anywhere — weighs next to nothing.
-
🔧 Tool-Free Install — No drilling, no modifications. Just thread the included bungee cords through the reinforced metal grommets, hook onto your roll bar, and go. Installs in under 10 minutes.
-
🧵 Built to Last — Double-sewn edges with rust-proof metal grommets. Made from high-density PVC-coated mesh that resists tearing, fading, and high heat. Engineered for years of sun, dust, and trail abuse.
-
🚙 Hard Top and Soft Top Compatible — No need to remove the sunshade when putting your hard top or soft top back on. It stays in place year-round.
Compatibility
Engineered for a precision fit on all 2018, 2019, 2020, 2021, and 2022 Jeep Wrangler models:
| Model |
Doors |
Trims |
| Wrangler JL |
2-Door |
Sport, Sport S, Sahara, Rubicon |
| Wrangler JLU |
4-Door (Unlimited) |
Sport, Sport S, Sahara, Rubicon |
Note: Also fits 2023 models with the same JL/JLU body style.
Frequently Asked Questions
Q: Can I leave this installed under my hard top?
Yes. The low-profile design sits flush against the roll bar and wont interfere with your hard top or soft top. No need to remove it when the seasons change.
Q: Does it flap at highway speeds?
No. When properly tensioned with the included bungee cords, the mesh stays taut and secure even at 70+ mph. The tight weave actually reduces wind buffeting compared to driving bare.
Q: Will it sag over time?
Not with proper installation. The double-sewn edges and reinforced grommets are designed to hold tension. If you notice any slack, simply re-tighten the bungee cords — takes seconds.
Q: Is it waterproof?
This is a mesh sunshade, not a rain cover. It will let water through — which is by design, so you do not end up with a water-filled tarp sagging overhead. For rain protection, pair this with your factory hard or soft top.
Q: Does this fit the 4xe or 392 models?
Yes — the 4xe and Rubicon 392 share the same JL/JLU roll bar design and roof dimensions as the standard models, so this sunshade fits perfectly.
Installation Instructions
-
Unpack and Lay Flat — Remove the sunshade from the storage bag and spread it out over your Wranglers roof area to identify the front and rear edges. The longer side goes front-to-back.
-
Attach Front Bungees — Starting at the windshield header, thread the bungee cord through the front grommets and loop around the roll bar or windshield frame. Pull snug but do not fully tighten yet.
-
Secure Rear Bungees — Move to the rear and attach bungees to the rear roll bar or sport bar. Again, keep them slightly loose for now.
-
Work the Sides — Attach the side grommets to the side roll bars using the remaining bungee cords. Space them evenly for uniform tension.
-
Tension and Adjust — Starting from the front and working your way back, tighten each bungee cord evenly. The mesh should be taut with no wrinkles or sagging.
-
Final Check — Tug each attachment point to verify it is secure. Take a short drive and re-check tension. Re-tighten any loose points.
⚠️ Tip: The mesh will stretch slightly during the first few days. Check and re-tension after the first week for a perfect, long-lasting fit.
Order now and ride cooler, quieter, and protected — backed by iFJF quality.
