Steering Wheel Quick Release Hub — 3/4" Shaft — Black Billet Aluminum

Description

Steering Wheel Quick Release Hub — 3/4" Shaft — Billet Aluminum — Black

The Steering Wheel Quick Release Hub is a precision CNC-machined billet aluminum quick disconnect system designed for race cars, drift builds, sim racing rigs, and custom automotive projects. The standard 3/4-inch shaft size fits most aftermarket steering wheels with a 6-bolt pattern, and the black anodized finish provides a sleek, professional look that complements any interior. Pop your wheel off in seconds for easier entry/exit in caged cars, theft deterrence, or quick swaps between different steering wheels.

Key Features

  • CNC Billet Aluminum: Machined from solid 6061-T6 aluminum billet — not cast, not stamped. Zero play between hub and shaft — precise steering feel with no slop or wiggle.
  • Black Anodized Finish: Type II hard anodizing in matte black — scratch-resistant, corrosion-proof, and won't fade under UV exposure.
  • Ball-Locking Mechanism: Spring-loaded ball bearings engage with an audible click — you'll know it's locked. Push-pull collar for instant release. Zero tools required for wheel changes.
  • Universal 6-Bolt Pattern: Standard 70mm PCD, 6-bolt pattern fits Momo, Sparco, NRG, OMP, MPI, Grant, and most aftermarket steering wheels.
  • 3/4" Shaft Compatibility: Fits all standard 3/4-inch smooth and keyed steering shafts — common on popular quick release hubs and adapters.

Specifications

Spec Value
Material 6061-T6 Billet Aluminum
Shaft Diameter 3/4 inch (19.05mm)
Bolt Pattern 6-Bolt, 70mm PCD
Finish Black Type II Anodized
Mechanism Push-Pull Ball Lock
Colors Black

Frequently Asked Questions

Q: Will this fit my [aftermarket steering wheel brand]?
A: If your steering wheel uses the standard 6-bolt, 70mm PCD (Pitch Circle Diameter) pattern — used by Momo, Sparco, NRG, OMP, MPI, and Grant — then yes. The 3/4-inch shaft side fits standard smooth and keyed shafts.

Q: Is there any play or slop in the mechanism?
A: When properly installed, there should be zero play. The ball-locking mechanism is self-adjusting and takes up any minor wear over time. If you experience play, check that the hub retaining screws are properly torqued.

Q: Is this legal for street use?
A: Removing the factory steering wheel disables the driver's airbag, which is a Federal motor vehicle safety violation for on-road vehicles in the United States (FMVSS 208). This product is intended for off-road, track, and competition use only. Not for use on public roads.

Q: Can I use this on my sim racing rig?
A: Absolutely. This is a popular choice for sim racing rigs using aftermarket steering wheels. The 3/4-inch shaft is commonly used on sim racing wheel bases with quick release adapters.

Related Guides & Articles

Steering Wheel Quick Release Hub — 3/4" Shaft — Black Billet Aluminum

Product form

SKU: FJ-TOOL80-CK

$47.99

    • Shipped today? Order within: Nov 17, 2026 17:00:00 +0800

    Description

    Steering Wheel Quick Release Hub — 3/4" Shaft — Billet Aluminum — Black

    The Steering Wheel Quick Release Hub is a precision CNC-machined billet aluminum quick disconnect system designed for race cars, drift builds, sim racing rigs, and custom automotive projects. The standard 3/4-inch shaft size fits most aftermarket steering wheels with a 6-bolt pattern, and the black anodized finish provides a sleek, professional look that complements any interior. Pop your wheel off in seconds for easier entry/exit in caged cars, theft deterrence, or quick swaps between different steering wheels.

    Key Features

    • CNC Billet Aluminum: Machined from solid 6061-T6 aluminum billet — not cast, not stamped. Zero play between hub and shaft — precise steering feel with no slop or wiggle.
    • Black Anodized Finish: Type II hard anodizing in matte black — scratch-resistant, corrosion-proof, and won't fade under UV exposure.
    • Ball-Locking Mechanism: Spring-loaded ball bearings engage with an audible click — you'll know it's locked. Push-pull collar for instant release. Zero tools required for wheel changes.
    • Universal 6-Bolt Pattern: Standard 70mm PCD, 6-bolt pattern fits Momo, Sparco, NRG, OMP, MPI, Grant, and most aftermarket steering wheels.
    • 3/4" Shaft Compatibility: Fits all standard 3/4-inch smooth and keyed steering shafts — common on popular quick release hubs and adapters.

    Specifications

    Spec Value
    Material 6061-T6 Billet Aluminum
    Shaft Diameter 3/4 inch (19.05mm)
    Bolt Pattern 6-Bolt, 70mm PCD
    Finish Black Type II Anodized
    Mechanism Push-Pull Ball Lock
    Colors Black

    Frequently Asked Questions

    Q: Will this fit my [aftermarket steering wheel brand]?
    A: If your steering wheel uses the standard 6-bolt, 70mm PCD (Pitch Circle Diameter) pattern — used by Momo, Sparco, NRG, OMP, MPI, and Grant — then yes. The 3/4-inch shaft side fits standard smooth and keyed shafts.

    Q: Is there any play or slop in the mechanism?
    A: When properly installed, there should be zero play. The ball-locking mechanism is self-adjusting and takes up any minor wear over time. If you experience play, check that the hub retaining screws are properly torqued.

    Q: Is this legal for street use?
    A: Removing the factory steering wheel disables the driver's airbag, which is a Federal motor vehicle safety violation for on-road vehicles in the United States (FMVSS 208). This product is intended for off-road, track, and competition use only. Not for use on public roads.

    Q: Can I use this on my sim racing rig?
    A: Absolutely. This is a popular choice for sim racing rigs using aftermarket steering wheels. The 3/4-inch shaft is commonly used on sim racing wheel bases with quick release adapters.

    Related Guides & Articles

    Recently viewed products

    © 2026 iFJF Direct | Sitemap

      • American Express
      • Diners Club
      • Discover
      • Maestro
      • Mastercard
      • PayPal
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account