Description
Replace Your Broken Silverado Tailgate Handle
A cracked or seized tailgate handle turns accessing your truck bed into a struggle. The iFJF Tailgate Handle and Bezel Kit is a direct replacement for 1999-2007 Chevrolet Silverado and GMC Sierra trucks. Includes both the handle assembly and the surrounding bezel — everything you need for a complete tailgate handle replacement in one box.
Common Tailgate Handle Problems
-
Handle feels loose or wobbly — Internal spring mechanism worn out
-
Handle won't return to closed position — Return spring broken
-
Bezel cracked or broken — UV degradation over time, especially in sunbelt states
-
Tailgate won't open at all — Handle linkage disconnected or seized
-
Paint peeling or fading — Original textured finish deteriorated
Compatibility
| Make |
Model |
Year Range |
Trim |
| Chevrolet |
Silverado 1500 |
1999-2007 |
All trims |
| Chevrolet |
Silverado 2500/2500HD |
1999-2007 |
All trims |
| Chevrolet |
Silverado 3500/3500HD |
2001-2007 |
All trims |
| GMC |
Sierra 1500 |
1999-2007 |
All trims |
| GMC |
Sierra 2500/2500HD |
1999-2007 |
All trims |
| GMC |
Sierra 3500/3500HD |
2001-2007 |
All trims |
Replaces OEM Part Numbers: 15997911, 15186242, 15767677
Specifications
| Specification |
Detail |
| Material |
High-impact ABS plastic with UV stabilizers |
| Finish |
Black textured — matches OEM appearance |
| Includes |
Handle assembly, bezel, mounting hardware |
| Installation Time |
15-20 minutes with basic hand tools |
| Fitment |
Direct bolt-on — no modifications needed |
Installation — Quick DIY Replacement
-
Lower the tailgate and remove the inner access panel (6-8 Torx T30 screws on the inside of the tailgate)
-
Disconnect the rods from the old handle mechanism — note their positions
-
Remove the old bezel and handle by pressing the retaining clips from behind
-
Install the new bezel — snap it into place from the outside
-
Install the new handle — secure with mounting screws, reconnect rods
-
Test operation before reinstalling the access panel
Why Choose iFJF?
-
Complete kit — Handle AND bezel in one box. Many sellers only include one piece
-
UV-stabilized — Won't fade, crack, or chalk in direct sunlight
-
OEM-grade fit — Snaps into position perfectly, no gaps or rattles
-
Textured black finish — Matches factory appearance exactly
-
Tested return spring — Smooth handle return every time
Frequently Asked Questions
Q: Does this include both the bezel and the handle?
A: Yes. This kit includes the complete handle assembly (with internal spring mechanism) and the outer bezel surround. It's a complete tailgate handle replacement kit.
Q: Will this fit my 2005 Silverado 2500HD?
A: Yes. The handle fits all 1999-2007 Silverado and Sierra trucks, including 1500, 2500, 2500HD, 3500, and 3500HD models. The tailgate handle design is the same across all trims.
Q: Is this painted or just black plastic?
A: This is black textured ABS plastic — the same as the factory finish on work truck and base model tailgates. It can be painted to match your truck's body color if desired.
Q: Do I need any special tools?
A: A Torx T30 bit for the access panel screws and a flathead screwdriver for the rod clips. That's it — no special automotive tools required.
Q: What if my tailgate won't open and I can't access the inner panel?
A: You'll need to open the tailgate first. Try reaching behind the handle from inside the bed, or remove the inner panel fasteners from inside the bed with the tailgate closed. There are YouTube tutorials for stuck tailgate access.
