Description
Fix ALL Your Refrigerator LED Lights in One Go
If your Whirlpool or KitchenAid refrigerator has dark sections — main light out while side lights work, or vice versa — you need this complete 3-piece LED driver set. Most Whirlpool-family refrigerators with LED lighting use two different driver modules: W10515057 for the side lights and W10515058 for the main overhead light. Replace all of them at once and restore full illumination to your entire refrigerator.
What's Included
-
2 × W10515057 Side Light Driver — Powers the LED strips on the sides of the fresh food compartment
-
1 × W10515058 Main Light Driver — Powers the primary overhead LED light
Symptoms This Kit Fixes
-
Main light out, side lights working — Failed W10515058 driver
-
Side lights out, main light working — Failed W10515057 driver(s)
-
All lights dim or flickering — Multiple aging drivers
-
Intermittent lighting — Drivers failing under heat load
-
Complete darkness — All drivers failed simultaneously (common after power surge)
Compatibility
| Brand |
Refrigerator Type |
Models |
| Whirlpool |
Side-by-side, French door, bottom-freezer |
Models with dual LED lighting zones (2010-2020) |
| KitchenAid |
Side-by-side, French door |
Models with multi-zone LED interior lighting |
| Maytag |
Side-by-side, French door |
Models with LED lighting systems |
| Amana |
Side-by-side |
Select models with LED interior lights |
| JennAir |
Built-in, freestanding |
Models with LED interior lighting systems |
Replaces Part Numbers: W10515057, W10515058, W10398007, PS11755866, AP6022533
Specifications
| Specification |
Detail |
| Kit Contents |
2 × W10515057 (side) + 1 × W10515058 (main) LED drivers |
| Connector Type |
OEM-style plug-and-play — no cutting or soldering |
| Input |
120V AC from refrigerator control board |
| Installation |
15-20 minutes — tool-free on most models |
| Testing |
Each driver individually tested for stable LED current output |
Why Replace All Drivers at Once?
LED drivers in refrigerators age at similar rates. If one has already failed, the others are close behind. Replacing all drivers at the same time saves you from having to tear into your refrigerator again in a few months when the next one fails.
Why Choose iFJF?
-
Complete set — All three drivers in one purchase. No need to order separately
-
Cost-effective — Bundle pricing saves money vs buying individual drivers
-
One repair, all lights fixed — Don't come back to a dark fridge in 3 months
-
Tested and matched — All drivers are pre-tested for stable, flicker-free output
-
Simple install — Pop off the light cover, swap the driver, snap the cover back on
Frequently Asked Questions
Q: How do I know if I need the 3-piece set or just one driver?
A: If only your side lights are out, you may just need W10515057. If only the main overhead light is out, you may just need W10515058. But if your fridge is more than 5 years old and one driver has failed, we recommend replacing all three — the others are likely near end-of-life.
Q: Does this fit my Whirlpool side-by-side?
A: Most Whirlpool side-by-side refrigerators manufactured between 2010-2020 with LED lighting use these exact driver modules. Check the part number on your existing driver to confirm: W10515057 or W10515058 should be printed on the module.
Q: Are these genuine OEM Whirlpool parts?
A: These are premium aftermarket replacements manufactured to OEM specifications. They provide identical voltage and current output to the original Whirlpool/KitchenAid drivers.
Q: Is installation really tool-free?
A: On most models, yes. The light panel cover snaps off, the driver unplugs, you plug in the new one, and snap the cover back. No screwdrivers, no wire stripping, no electrical work required.
Q: What if the new driver doesn't fix my lights?
A: If replacing the driver doesn't restore your lights, the issue may be with the main control board or the LED strip itself. However, the driver is the failure point in 90%+ of cases.
