Description
Portable Marine Fuel Tank 12L (3 Gallon) + 10ft Fuel Line Kit — Complete Outboard Fuel System
Product Overview
The iFJF Complete Portable Marine Fuel System combines a rugged 12L (3-Gallon) HDPE fuel tank with a 10 ft 5/16" fuel hose and primer bulb kit — everything you need to get fuel flowing from tank to outboard. Designed as a universal solution for Mercury, Yamaha, Johnson, Evinrude, Suzuki, and Tohatsu outboards from 4 HP to 200 HP.
This all-in-one kit eliminates the frustration of mismatched fittings and missing components. The tank features a 1/4" NPT outlet that connects to the included 5/16" fuel line via standard engine-specific connectors (sold separately or use your existing engine-side connector). The inline primer bulb provides quick, reliable cold starts — just a few squeezes and you're ready to go.
Key Features
-
Complete Turnkey System: 12L HDPE tank + 10 ft 5/16" fuel hose + primer bulb kit — no additional purchases required.
-
12L / 3-Gallon Capacity: Perfect for small to mid-size outboards — roughly 1-4 hours of runtime depending on engine size and throttle.
-
10 ft Fuel Line Hose: Extra-long 5/16" ID marine-grade hose provides flexible tank placement anywhere on your boat.
-
Inline Primer Bulb: High-flow squeeze bulb for fast priming and reliable cold starts — check valve prevents fuel drain-back.
-
Universal Tank Design: Standard 1/4" NPT outlet compatible with Mercury bayonet, Yamaha clip, and OMC connectors.
-
UV-Resistant HDPE: Heavy-duty construction withstands sun, salt, and rough marine use without rusting.
What's Included
| Component |
Specification |
| Fuel Tank |
12L / 3.17 Gallon HDPE, Red, Rectangular with Handle |
| Fuel Hose |
10 ft (3.05m), 5/16" ID Marine-Grade |
| Primer Bulb |
High-Flow Squeeze Bulb with Check Valve |
| Hose Clamps |
Stainless Steel Worm-Drive (x4) |
| Tank Connector |
1/4" NPT Female to 5/16" Barb |
Specifications
| Specification |
Value |
| Tank Capacity |
12 Liters / 3.17 Gallons |
| Tank Material |
UV-Resistant HDPE |
| Fuel Hose Length |
10 ft (3.05 meters) |
| Fuel Hose ID |
5/16 inch (8mm) |
| Compatible Engines |
Mercury, Yamaha, Johnson, Evinrude, Suzuki, Tohatsu, Honda 4-200 HP |
| Compliance |
CARB / EPA Compliant |
Frequently Asked Questions
Q: Does this kit include the engine-side connector?
A: The kit includes the tank-side connector (1/4" NPT to 5/16" barb) and fuel line. If your engine has a specific bayonet or clip connector at the engine end, you can reuse your existing one or purchase a brand-specific engine connector separately.
Q: Will the primer bulb work with my Mercury outboard?
A: Yes. The included primer bulb and 5/16" fuel line are compatible with Mercury, Yamaha, Johnson/Evinrude, and most other outboard brands. The check valve orientation arrow should point toward the engine.
Q: How do I install the fuel line fittings?
A: Slide the hose clamps onto the fuel line, push the barbed fittings into each end of the hose, then tighten the clamps. Soaking the hose ends in hot water for 30 seconds makes installation easier.
Q: Can I leave fuel in the tank between trips?
A: For periods under 2 weeks, it's generally fine. For longer storage, we recommend draining the tank, adding fuel stabilizer, or keeping the tank full to minimize condensation inside the tank.
Q: What's the difference between this kit and the tank-only listing?
A: This kit includes the 10 ft fuel hose, primer bulb, and all hose clamps — ready to connect to your outboard. The tank-only listing is just the tank. This kit saves about 20% versus buying components separately.
