Search results for "Chevy/GMC"
iFJF Edelbrock 1409 Marine 600 CFM 4-Barrel Carburetor — Electric Choke, for Chrysler/Chevy Marine V8 (Golden)
Edelbrock 1409 Marine Carburetor — 600 CFM, USCG Compliant The iFJF 1409 Marine Carburetor is purpose-built for the water. With 600 CFM airflow, an electric choke, and full USCG compliance, this 4-barrel carburetor is engineered for Chrysler Marine and Chevy Marine V8 engines. Unlike automotive carburetors, the 1409 features sealed throttle shafts, J-style vent tubes, and marine-specific fuel bowl vents that prevent fuel spillage in rough water conditions. Key Marine-Specific Features USCG Compliant — Meets United States Coast Guard safety requirements for fuel system integrity on inboard marine engines Sealed Throttle Shafts — Prevents fuel and vapor leakage into the engine compartment J-Style Vent Tubes — Redirects fuel bowl overflow back into the venturi instead of spilling onto the intake manifold Marine-Calibrated Jetting — Optimized fuel curve for constant-load marine operation vs stop-and-go automotive use 600 CFM Flow — Ideal for Chrysler Marine 318-440 and Chevy Marine 305-454 V8 engines Electric Choke — Reliable cold starts on the water with simple 12V wiring Gold Finish — Premium corrosion-resistant coating for the marine environment Marine Engine Compatibility Marine Engine Displacement Carburetor Model Chrysler Marine 318, 360, 400, 440 V8 Edelbrock 1409 replacement Chevy Marine 305, 350, 454 V8 Edelbrock 1409 replacement Mercruiser (OEM) 5.0L, 5.7L, 7.4L Square bore intake required OMC / Volvo Penta 5.0L, 5.7L, 7.4L, 8.1L Verify intake manifold pattern Specifications Specification Value CFM Rating 600 CFM Barrels 4-Barrel Choke Type Electric (12V) Flange Type Square Bore Finish Gold Dichromate Certification USCG Compliant Frequently Asked Questions Q: Can I use an automotive carburetor on my boat? A: No. Marine carburetors have specific safety features — sealed throttle shafts, J-vent tubes, and marine-specific calibrations — that auto carburetors lack. Using an automotive carburetor on a boat is dangerous and violates USCG regulations. Q: Will this bolt up to my Mercruiser intake? A: The 1409 has a standard square bore flange pattern. Most Mercruiser 5.0L/5.7L intake manifolds are spread bore (Quadrajet pattern). A square-to-spread bore adapter plate is required for those applications. The 7.4L/454 often uses a square bore intake and can accept the 1409 directly. Q: Do I need a different fuel line for marine use? A: Yes — marine applications require USCG Type A1 fuel hose with fire-resistant rating. Standard automotive fuel line is not approved for enclosed engine compartments on boats. Q: What fuel pressure should I run? A: 5.5-6.0 PSI maximum. A marine-grade fuel pressure regulator is recommended. High fuel pressure from a mechanical pump (common on big block marine engines) can flood the carburetor and create a fire hazard. Q: Is tuning different for marine vs automotive? A: Marine engines operate under constant load with less variation in RPM, so the fuel curve is calibrated richer at cruise. The 1409 comes pre-calibrated for marine use. Only adjust jetting if you're at high altitude or have made significant engine modifications. Q: Does installation require a marine mechanic? A: While a DIY-capable boat owner can install this carburetor, we recommend professional installation if you're unfamiliar with marine fuel systems. Improper installation creates serious fire and explosion risks in enclosed engine compartments. 🔗 Related Products from iFJF 1409 Marine Carburetor 600 CFM 1410 Marine Carburetor 750 CFM (Golden) 📚 Helpful Installation Guides 📖 Mercruiser 4.3L V6 Marine Carburetor Replacement Guide: 3310-807764A1 Electric Choke Install & Tuning 📖 How To Rebuild Edelbrock 1406 and 1405 Carburetors | Rebuild Kit Links
$399.99
iFJF iFJF Truck Tool Box Mounting Kit Pickup Universal Fit Toolbox Tie Downs Aluminum Alloy J Hooks Crossover with Screws and Washers (4 Packs,Black)
Product Overview The iFJF Truck Tool Box Mounting Kit (4-Pack, Black) provides a universal no-drill solution for securing any crossover truck toolbox. Heavy-duty aluminum alloy J-hooks with oversized clamping brackets lock your toolbox firmly in place protecting both your tools and truck bed. Key Features Universal Fitment: Fits virtually all pickups Ford F-150/250/350, Chevy Silverado, GMC Sierra, Ram 1500/2500/3500, Toyota Tundra, Nissan Titan. Aluminum Alloy: Corrosion-resistant no rust even exposed to rain, snow, and road salt. Oversized Brackets: Wider clamping surface distributes force evenly, preventing toolbox deformation. Complete 4-Pack: 4 J-hooks, 4 brackets, 8 screws, 8 washers, 4 nuts everything included. No-Drill Install: J-hooks clamp under bed rail no drilling required. Install in minutes. Compatibility Vehicle Type Box Style Fitment Full-Size Pickups Crossover (behind cab) Universal Mid-Size Pickups Crossover (behind cab) Universal Compact Pickups Crossover (behind cab) Universal Specifications Material Aluminum Alloy Color Black Installation No-drill clamp-on Application All pickup truck bed rails Frequently Asked Questions Q: Will this work with my F-150 and Dee Zee toolbox?A: Yes! Compatible with all standard crossover toolboxes (Dee Zee, UWS, Weather Guard, Better Built) on all full-size pickups. Q: Do I need to drill holes?A: No drilling required! J-hooks clamp under bed rail for secure, damage-free mounting. Q: Will these rust?A: No aluminum alloy construction resists rust through years of outdoor exposure. Related Products You May Need iFJF Truck Tool Box Mounting Kit Pickup Universal Fit Toolbox Tie Downs Aluminum iFJF Mounting Clamps Truck Caps Camper Shell for Chevy Silverado Sierra 1500 250 iFJF Mounting Clamps Truck Caps Camper Shell for Chevy 1500 2500 3500 F150 F250 Related Guides & Resources Truck Toolbox Installation Guide Essential Truck Accessories
$29.99
iFJF iFJF 4.8L 5.3L 6.0L LSX Silverado EGR Delete Plug Intake Exhaust Block Off Plate
Product Overview 4.8L 5.3L 6.0L LSX Silverado EGR Delete Plug Intake Exhaust Block Off Plate — precision-engineered block-off solution for off-road and competition vehicles. Eliminates the EGR (Exhaust Gas Recirculation) system, preventing hot exhaust gases from recirculating into your intake manifold. Removing this restriction reduces carbon buildup, lowers intake air temperatures, and improves engine efficiency. ⚠️ IMPORTANT: This product is intended for OFF-ROAD / COMPETITION USE ONLY. EGR system removal is not EPA-compliant for on-road vehicles. ECU tuning is REQUIRED to disable EGR-related DTCs. Key Features Complete Block-Off: CNC-machined plates/plugs seal all EGR ports — no exhaust or vacuum leaks. Heavy-Duty Material: Thick-gauge steel/aluminum with corrosion-resistant finish for high-temp durability. Reduced Carbon Buildup: Eliminates carbon deposits in intake manifold, throttle body, and intake valves. Lower Intake Temperatures: Significantly cooler intake air improves combustion efficiency. Complete Kit: All block-off plates, gaskets, bolts, and hardware for clean installation. Compatibility Year Make Engine Refer to product title. Contact support. Installation Overview Tools: Socket set, wrenches, screwdrivers, torque wrench Skill Level: Intermediate to advanced — mechanical experience recommended Time: 2-4 hours depending on vehicle Tuning Required: ECU recalibration MANDATORY to prevent CEL/limp mode Gaskets: New gaskets provided — always replace, never reuse Why Delete EGR? EGR recirculates exhaust gas to reduce NOx emissions. Over time, carbon deposits clog intake components — reducing airflow, power, and fuel economy. EGR removal (off-road only) eliminates these issues for cleaner airflow, lower engine temps, and improved throttle response. Frequently Asked Questions Q: Will this trigger a check engine light?A: Yes. EGR removal triggers DTCs. ECU tuning is REQUIRED to disable these codes. Hardware only — tuning sold separately. Q: Is this legal for street use?A: No. For OFF-ROAD / COMPETITION USE ONLY. Not EPA-compliant for on-road vehicles. Check local laws before purchase. Q: What's included in the kit?A: Block-off plates/plugs, replacement gaskets, installation hardware. Refer to product images for exact contents. Q: Should I remove the EGR cooler too?A: Recommended — cooler is non-functional without EGR flow. Some kits include cooler delete components. Q: What performance benefits can I expect?A: Lower intake temps, reduced carbon buildup, improved throttle response, slightly better fuel economy, more consistent performance under load. Q: Will this affect my turbo?A: No direct effect. Reduced carbon in intake helps maintain turbo efficiency over time. Shop with Confidence Add to cart. Ships fast from US warehouse. For off-road and competition use only.
$26.88
iFJF iFJF 6PK2060 Serpentine Belt 6 Ribs 80.1" for Cimarron Cavalier & More — EPDM Drive Belt
Product Overview The iFJF 6PK2060 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 80.1 inches (2060mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK2060 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Cimarron 1985-1986 Cavalier 1985-1986 Ranger 1994-1995 S15 Jimmy 1987-1988 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (80.1 inches / 2060mm) before purchasing. Technical Specifications Part Number 6PK2060 Rib Count 6 Ribs Effective Length 2060mm (80.1 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK2060, 5060200, K06200, 4060200 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2060mm (80.1" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 2060mm (80.1 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 80.1 inches, it will fit. The belt is compatible with Cimarron, Cavalier, Ranger and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK2060 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 80.71" for B4000 Navajo & More 81.38" for CTS DeVille & More 78.54" for X3 X5 & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$27.99
iFJF iFJF for GM LS Billet Aluminum Oil Bypass & Barbell Kit for LS1 LS2 LS3 LSX
Product Overview Upgrade your GM LS engine's oiling system with the iFJF Billet Aluminum Oil Bypass & Barbell Kit. The factory plastic barbell (oil gallery plug) in LS engines is a known failure point — when it cracks or deteriorates, you lose oil pressure to the rear of the engine, often leading to catastrophic bearing failure. Our CNC-machined 6061-T6 aluminum replacement eliminates this risk permanently. Designed for all GM LS-based engines including LS1, LS2, LS3, LS6, LQ4, LQ9, and LSX variants. Whether you're doing an LS swap, rebuilding, or just performing preventive maintenance, this kit is essential insurance for your engine. Key Features CNC-Machined 6061-T6 Billet Aluminum — Will never crack, shrink, or deteriorate like stock plastic Complete Kit — Includes oil bypass barbell + rear cover alignment dowels Precision O-Ring Grooves — Properly machined for leak-free oil gallery sealing Anodized Finish — Corrosion-resistant for long-term reliability Lifetime Warranty — Built to outlast your engine Why Replace the Stock Plastic Barbell? The OEM plastic barbell oil plug is a cost-cutting part that degrades over time from heat cycling and oil exposure. When it fails: Oil pressure drops (especially at idle) Rear main bearings and cam bearings starve for oil Engine damage can occur within seconds of pressure loss Common failure point on high-mileage and high-performance LS builds If you're rebuilding an LS or pulling the rear cover for any reason, replace the plastic barbell with billet aluminum — it's cheap insurance against a multi-thousand-dollar engine failure. Compatibility Engine Displacement Applications LS1 5.7L 1997-2004 Corvette, Camaro, Firebird, GTO LS2 6.0L 2005-2007 Corvette, GTO, TrailBlazer SS, SSR LS3 / L99 6.2L 2008-2015 Corvette, Camaro SS, G8 GXP LS6 5.7L 2001-2004 Corvette Z06, CTS-V LQ4 / LQ9 6.0L 1999-2007 Silverado, Sierra, Escalade, Denali LSX / LS7 7.0L+ Aftermarket LS blocks, Z06 LM7 / LR4 / LM4 / L33 4.8L / 5.3L 1999-2007 Truck/SUV Specifications Specification Value Material 6061-T6 Billet Aluminum Finish Clear Anodized Includes Barbell + 2x Alignment Dowels Manufacturing CNC Machined Warranty Lifetime Frequently Asked Questions Q: Do I need to pull the engine to install this?A: No. The barbell is located behind the rear engine cover (between engine and transmission). It's accessible when the transmission or rear cover is removed — common during clutch replacement, rear main seal service, or engine rebuild. On some vehicles, you can access it by removing the rear cover with the engine in the vehicle. Q: Will this fit my 2004 Silverado 5.3L LM7?A: Yes. This kit fits ALL Gen III and Gen IV LS-based engines regardless of displacement. The oil gallery design is universal across the LS platform. Q: Is this just the barbell, or does it include the rear cover?A: This kit includes the billet aluminum barbell (oil gallery plug) and alignment dowels. The rear cover is NOT included — you reuse your factory rear cover or aftermarket replacement. Q: Do I need sealant to install this?A: The barbell uses O-rings for sealing — no sealant required. Just lubricate the O-rings with clean engine oil before installation and ensure the bores are clean. Q: Is this necessary for a stock rebuild?A: Highly recommended. The factory plastic barbell costs pennies to produce and is a known failure point even on stock engines. For the cost of this kit vs. a potential engine failure, it's a no-brainer. Related Products More in GM LS Engines: AN10 Part LS1 Part LS1 Part Browse All Engine Parts Related Blog Posts LS Engine Building Tips & Common Failure Points
$49.99
EGR Delete Block Off Plate Kit for Off-Road 1983-1997 Ford F150 F250 F350 Bronco 5.0L 5.8L
Product Overview The iFJF EGR Delete Block Off Plate Kit is engineered for 1983-1997 Ford F-Series trucks and Broncos with the 5.0L (302) or 5.8L (351W) V8 engines. CNC-machined from 6061-T6 billet aluminum, these plates permanently seal the EGR ports on both the intake and exhaust manifolds. ⚠️ For off-road and competition use only — not street legal in emissions-controlled areas. Key Features CNC-Machined Billet Aluminum — Precision-cut 6061-T6 aluminum plates with a smooth sealing surface. Won't warp or crack like stamped steel alternatives. Complete Kit — Includes intake manifold block-off plate, exhaust manifold block-off plate, high-temperature graphite gaskets, and Grade 8 hardware. Eliminates Carbon Buildup — Removing the EGR system stops exhaust soot from entering your intake manifold, keeping intake ports and valves clean. Improved Throttle Response — Cleaner intake air charge = crisper throttle and more consistent idle quality. Corrosion-Resistant — Natural aluminum finish with protective clear anodizing. Won't rust like steel plates. Compatibility Vehicle Engine Years Ford F150 5.0L 302 / 5.8L 351W 1983-1997 Ford F250 5.0L 302 / 5.8L 351W 1983-1997 Ford F350 5.0L 302 / 5.8L 351W 1983-1997 Ford Bronco 5.0L 302 / 5.8L 351W 1983-1996 Specifications Spec Value Brand iFJF Material 6061-T6 Billet Aluminum Finish Clear Anodized Gasket Material High-Temperature Graphite Hardware Grade 8 Steel Bolts Use Off-Road / Competition Only Why Choose iFJF Generic EGR block-off kits often use thin stamped steel that warps and leaks. Our CNC-machined billet aluminum plates maintain a true flat surface for a leak-free seal. Every kit includes high-temperature graphite gaskets — not cheap paper gaskets that burn through after a few heat cycles. Designed by enthusiasts, for enthusiasts. Installation Instructions Disconnect the battery and allow the engine to cool completely. Locate the EGR valve — mounted on or near the intake manifold on the passenger side of the engine. Remove the EGR valve — disconnect vacuum line, unbolt from the intake manifold. Remove the EGR tube running to the exhaust manifold. Clean the mounting surfaces — use a gasket scraper and brake cleaner to remove old gasket material and carbon deposits. Install block-off plates — place the graphite gasket between the plate and manifold surface. Hand-tighten bolts, then torque to 15-18 ft-lbs in a cross pattern. Cap vacuum lines — plug any open vacuum ports left by the EGR system removal. Frequently Asked Questions Q: What is an EGR delete and why would I do it?A: EGR (Exhaust Gas Recirculation) routes exhaust back into the intake to reduce emissions. Over time, carbon buildup clogs the EGR valve and intake passages, causing rough idle, poor performance, and reduced fuel economy. Deleting it cleans up the intake path for improved throttle response — for off-road and competition use only. Q: Does this kit include everything I need?A: Yes. The kit includes aluminum block-off plates for both the intake manifold port and exhaust manifold port, plus high-temperature gaskets and Grade 8 hardware. Everything needed for a complete installation. Q: Will this trigger a check engine light?A: On OBD-I vehicles (pre-1996), typically no. On 1996-1997 OBD-II vehicles, removing the EGR system may trigger a P0401 code. This kit is intended for off-road use where emissions compliance is not required. Q: Does this fit the 5.0L and 5.8L?A: Yes. The plate pattern fits both the 5.0L (302) and 5.8L (351W) Windsor V8 engines found in 1983-1997 Ford trucks and Broncos. Always verify your EGR valve mounting pattern before ordering. Q: Is this for diesel or gas engines?A: This kit is for the GASOLINE 5.0L/5.8L V8 engines. Not for diesel applications. For 6.4L Powerstroke diesel EGR delete, see our separate diesel kit. Related Products EGR Valve Delete Kit for 6.4 Powerstroke Diesel ER-ads for 5.0L/5.8L ($74.58) ER-ads for 5.0L ($79.99)
$26.99
iFJF iFJF 6PK2067 Serpentine Belt 6 Ribs 81.38" for CTS DeVille & More — EPDM Drive Belt
Product Overview The iFJF 6PK2067 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 81.38 inches (2067mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK2067 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years CTS 2004-2007 DeVille 2000-2005 Challenger 2008-2010 Charger 2006-2010 Magnum 2006-2008 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (81.38 inches / 2067mm) before purchasing. Technical Specifications Part Number 6PK2067 Rib Count 6 Ribs Effective Length 2067mm (81.38 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK2067, 5060200, K06200, 4060200 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2067mm (81.38" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 2067mm (81.38 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 81.38 inches, it will fit. The belt is compatible with CTS, DeVille, Challenger and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK2067 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 80.1" for Cimarron Cavalier & More 81.5" for CTS DeVille & More 80.71" for B4000 Navajo & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$27.99
iFJF iFJF 6PK2075 Serpentine Belt 6 Ribs 81.69" for Camaro Lebaron & More — EPDM Drive Belt
Product Overview The iFJF 6PK2075 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 81.69 inches (2075mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK2075 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Camaro 1987 Lebaron 1991 TC Maserati 1991 Caravan 1991-1995 Daytona 1991-1993 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (81.69 inches / 2075mm) before purchasing. Technical Specifications Part Number 6PK2075 Rib Count 6 Ribs Effective Length 2075mm (81.69 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK2075, 5060200, K06200, 4060200 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2075mm (81.69" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 2075mm (81.69 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 81.69 inches, it will fit. The belt is compatible with Camaro, Lebaron, TC Maserati and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK2075 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 81.5" for CTS DeVille & More 83.46" for DeVille Eldorado & More 81.38" for CTS DeVille & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$27.99
iFJF iFJF 6PK2165 Serpentine Belt 6 Ribs 85.24" for Allante Camaro & More — EPDM Drive Belt
Product Overview The iFJF 6PK2165 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 85.24 inches (2165mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK2165 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Allante 1991-1992 Camaro 2012 LTD 1985 Mustang 1985-1986 Taurus 1994 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (85.24 inches / 2165mm) before purchasing. Technical Specifications Part Number 6PK2165 Rib Count 6 Ribs Effective Length 2165mm (85.24 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK2165, 5060210, K06210, 4060210 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2165mm (85.24" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 2165mm (85.24 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 85.24 inches, it will fit. The belt is compatible with Allante, Camaro, LTD and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK2165 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 83.46" for DeVille Eldorado & More 85.63" for Mariner Focus & More 81.69" for Camaro Lebaron & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$27.99
iFJF EGR Delete Block-Off Plate for 1983-1997 Ford F-150 F-250 F-350 Bronco
Product OverviewCNC-machined billet aluminum EGR delete block-off plate kit for 1983-1997 Ford F-150, F-250, F-350, and Bronco with 4.9L 300 I6, 5.0L 302, 5.8L 351W, and 7.5L 460 engines. This kit eliminates the problematic EGR system that causes carbon buildup, rough idle, and reduced performance. Precision-cut for perfect sealing with included gaskets and hardware. For off-road and competition use only. Key Features Billet Aluminum: CNC-machined from 6061-T6 billet aluminum for superior strength and corrosion resistance — far more durable than stamped steel alternatives. Complete Kit: Includes block-off plate, high-temperature gasket, and Grade 8 mounting hardware — everything needed for a leak-free installation. Eliminates Carbon Buildup: By removing the EGR system, you prevent exhaust gas recirculation that causes intake manifold carbon deposits, rough idle, and throttle body contamination. Precision Fit: CAD-designed to exact OEM EGR valve mounting dimensions — no modification, drilling, or grinding required. Cleaner Engine Bay: Removes cluttered EGR vacuum lines, solenoid, and valve for a simplified, professional-looking engine compartment. Compatibility Make Model Engine Year Ford F-150, F-250, F-350, Bronco 4.9L 300 I6, 5.0L 302, 5.8L 351W, 7.5L 460 1983-1997 Specifications Specification Detail Material 6061-T6 Billet Aluminum Finish Natural Machined Includes Block-Off Plate + Gasket + Hardware Application EGR Valve Block-Off Usage Off-Road / Competition Only Why Choose iFJFAt iFJF Direct, we engineer performance solutions for enthusiasts who demand quality. Every product is CNC-machined to exact specifications and backed by our 1-year warranty. We ship from our US warehouse with fast, tracked delivery. ⚠️ Disclaimer: This product is intended for off-road and competition use only. It is not CARB-compliant and may not be legal for on-highway use in your jurisdiction. Frequently Asked QuestionsQ: Is this EGR delete kit street legal?A: No. EGR deletes are intended for off-road, racing, and competition use only. Removing emissions equipment may violate federal and state laws. Check local regulations before installation. Q: Will this trigger a check engine light?A: Yes, removing the EGR system will trigger a check engine light on OBD-I and OBD-II vehicles. An EGR simulator or custom ECU tune is recommended. Q: Do I need special tools?A: Basic hand tools — ratchet, socket set, gasket scraper. Installation takes approximately 30-60 minutes depending on engine bay access. Q: What is your return policy?A: We offer a 90-day return policy for unused items in original packaging. Contact us for a replacement or full refund if you receive a defective product. Q: How fast is shipping?A: Orders ship within 1-2 business days from our US warehouse. Standard shipping takes 3-7 business days. Expedited options available at checkout. Q: Do you offer warranty?A: Yes, all iFJF products come with a 1-year warranty against manufacturing defects. Order with ConfidenceReady to simplify your engine bay? Add to cart now and enjoy free shipping on orders $50+. Questions? Contact our support team — we respond within 24 hours.
$22.87
iFJF CF197 Carbon Cabin Filter for 2011-2019 Cruze Cascada SRX 1.4L 1.6L
Overview The CF197 Carbon Cabin Air Filter delivers cleaner, fresher air for your GM compact and crossover vehicles. Designed as a direct OEM replacement, this filter combines high-efficiency particulate capture with an activated carbon layer that neutralizes exhaust fumes, pollen, and urban air pollutants. Whether commuting in a Cruze, enjoying open-top driving in a Cascada, or hauling family in an SRX, this filter makes every trip more comfortable. Key Features Activated Carbon Media: Absorbs outside odors, diesel fumes, and VOCs for fresher cabin air Triple-Layer Construction: Pre-filter + electrostatic middle layer + carbon-impregnated final layer Wide GM Compatibility: Fits multiple GM global platforms — Cruze, Cascada, SRX, Orlando OEM Replacement: Direct cross for 13271190, CF197, CUK2442 Easy Access: Filter located behind glovebox — DIY in 5-10 minutes Compatibility Table Brand Model Engine Year Range Chevrolet Cruze 1.4L Turbo / 1.8L 2011-2019 Chevrolet Cruze Limited 1.4L Turbo / 1.8L 2016 Buick Cascada 1.6L Turbo 2016-2019 Cadillac SRX 3.6L V6 2012-2016 Chevrolet Orlando 2.4L 2012-2014 Specifications Spec Value Part Number CF197, 13271190, CUK2442 Filter Type Cabin Air — Activated Carbon Dimensions ~240mm × ~200mm × ~30mm Replacement Interval Every 12,000-15,000 miles or 12 months Why Replace Your Cabin Filter? Health: A clogged filter recirculates mold spores, bacteria, and allergens AC Performance: Restricted airflow forces the blower motor to work harder, reducing cooling efficiency Defrosting: A fresh filter improves windshield defogging in winter by allowing better airflow Resale Value: A clean-smelling cabin creates a better impression for potential buyers FAQ Q: Does this fit the 2014 Chevy Cruze diesel?A: Yes. The CF197 fits all 2011-2019 Cruze models including the 2.0L turbo diesel variant. The cabin filter housing is identical across all Cruze powertrains. Q: How do I access the cabin filter on a Cruze?A: Open the glovebox, squeeze the sides inward to release the stops, let it drop down. The filter tray is behind a rectangular plastic cover. Slide out the old filter, insert the new one (arrow pointing toward the blower), and reassemble. Q: What causes the musty smell when I turn on the AC?A: A saturated cabin filter combined with moisture on the evaporator coil creates the perfect breeding ground for mold and bacteria. Replacing the cabin filter and running the fan on high for 5 minutes after AC use helps prevent this.
$39.99
iFJF 1403 Performer 500 CFM 4-Barrel Carburetor Electric Choke Golden
Product Overview The iFJF 1403 Performer 500 CFM 4-barrel carburetor is a square-bore, electric-choke replacement for a worn Quadrajet or a factory EFI system that will not behave. Edelbrock calibrates the Performer Series for small-cubic-inch engines — 305 cu in and smaller Chevrolet and 302 cu in and smaller Ford — and the 4150-pattern flange bolts straight to a square-bore intake. The two-piece aluminum body delivers crisp throttle response and can be re-jetted without removing the carburetor. This is the golden-finish version, with no EGR provisions. Key Features ✓ 500 CFM Calibration For Small-Cubic-Inch V8s: Factory-calibrated for 305 cu in and smaller Chevrolet and 302 cu in and smaller Ford, plus dual-quad C-26 / F-28 applications. ✓ Electric Choke: A switched 12V feed gives clean cold starts without running a manual choke cable into the cabin. ✓ Vacuum Air-Valve Secondary: Edelbrock's Performer Series uses a vacuum-operated air valve secondary for progressive part-throttle response. ✓ Tunable Without Removing It: Metering rods, jets and the step-up spring can be changed on the engine — no fuel draining. ✓ Two-Piece Aluminum Body: The lightweight all-aluminum, two-piece body resists warping and is compatible with blended pump fuel. ✓ Bolt-On 4150 Square-Bore Flange: Fits square-bore intakes directly; timed and full vacuum ports are included for ignition advance. Vehicle Compatibility Direct Fit Any 4150 square-bore intake manifold Calibrated For 305 cu in and smaller Chevrolet; 302 cu in and smaller Ford Dual-Quad Edelbrock C-26, F-28 and Street Tunnel Ram manifolds Manifold Match Edelbrock Performer / Performer EPS, or similar design Adapter Required Spread-bore Quadrajet or Chrysler Thermoquad — Edelbrock #2696 / #2697 Not For Computer-controlled applications (some 1981+ GM Q-Jet, some 1981+ Ford AOD) Technical Specifications CFM Rating 500 CFM @ 1.5 inHg Barrel Configuration 4-Barrel, Square Bore (4150 pattern) Choke Type Electric (switched 12V) Secondary Type Vacuum-Controlled Air Valve Finish Golden Bore Diameter Primary 1.44" / Secondary 1.69" Main Venturi Diameter 1.19" Body Height 3.25" Mounting Flange Square Bore, 4150 pattern Material Aluminum (two-piece body) Vacuum Ports Timed and full vacuum ports included for ignition advance EGR Provisions None Fuel Type Gasoline — not calibrated for alcohol, race fuel or E85 Fuel Pressure 6.5 psi maximum; set an adjustable regulator to 5.5 psi Recommended Displacement 305 cu in and smaller Chevrolet; 302 cu in and smaller Ford; dual-quad C-26 / F-28 Included Square-bore base gasket, air horn gasket, air cleaner stud, red choke positive wire and black choke ground wire, 2 vacuum caps, vacuum tee, 1/4" NPT pipe plug, throttle cable ball-end stud with nut and star washer. Carburetor studs sold separately (Edelbrock #8008 or #8024). Why Choose iFJF? Quality Assurance: Every product undergoes rigorous quality inspection before shipping. USA-Based Inventory: Products ship from our US warehouse — no waiting for international freight. Expert Support: Our team knows automotive, truck, and RV parts. Real answers from real people. Fair Pricing: Premium quality without the premium markup — direct value to you. Hassle-Free Returns: 90-day return policy. If it doesn't fit or meet your expectations, we'll make it right. Backed by ISO 9001:2015 and IATF 16949:2016 quality management system certifications. Installation Tips Check fuel pressure before the first start — Edelbrock's limit is 6.5 psi, with a regulator set to 5.5 psi Fit a new square-bore base gasket and air horn gasket; Edelbrock's warranty is void if dirt found in the carburetor is traced to a missing filter Tighten the mounting nuts evenly over several steps — overtightening can distort the two-piece aluminum body Run the choke positive lead to a switched 12V source (Run position only) and ground the black wire to the carburetor body Cap every unused vacuum port using the supplied vacuum caps; plug an unused rear port with the supplied 1/4" NPT pipe plug Check for fuel and vacuum leaks before the first road test Frequently Asked Questions Q: Will this carburetor fit my engine?A: The 1403 is a square-bore carburetor with a 4150-pattern flange, so it bolts directly to any square-bore intake manifold. It is calibrated for small-cubic-inch engines — 305 cu in and smaller Chevrolet, 302 cu in and smaller Ford — and for dual-quad applications such as the Edelbrock C-26, F-28 and Street Tunnel Ram. A spread-bore intake such as a Quadrajet or Chrysler Thermoquad needs Edelbrock adapter #2696 (or adapter-and-fuel-line kit #2697). It is not for computer-controlled applications, which includes some 1981-and-later GM vehicles with a Q-Jet carburetor and some 1981-and-later Ford vehicles with an AOD transmission. Q: Is 500 CFM enough for my engine?A: Edelbrock builds the Performer Series around small-cubic-inch engines: this 500 CFM version for 305 cu in and smaller Chevrolet and 302 cu in and smaller Ford, and 600 CFM (such as #1406) for larger or higher-revving combinations. Match the CFM rating to the engine rather than fitting the biggest number available. Q: What fuel pressure does this carburetor need?A: Per Edelbrock's installation instructions, do not use more than 6.5 psi fuel pressure — excessive pressure causes flooding. The owner's manual adds that pressure at idle should not exceed 6.0 psi, that an adjustable regulator should be set to 5.5 psi, and that pressure should not drop below 2.0 psi at high rpm and wide-open throttle. A regulator such as Edelbrock #8190 is used if the pump runs higher. Q: Do I need an adapter or a throttle linkage kit?A: No adapter is needed on a square-bore intake. A spread-bore Quadrajet or Chrysler Thermoquad intake needs Edelbrock adapter #2696 or kit #2697. Connect the electric choke to a switched 12V source (Run position only) and ground it to the carburetor body. The throttle cable ball-end stud is removable and is installed in the position your linkage requires; 1977-and-later Chevrolet applications use the Edelbrock #8009 throttle cable adapter stud. Ford vehicles with an automatic transmission need Throttle Lever Kit #1483, Chrysler vehicles with an automatic need Throttle Lever Kit #1481, and Ford cable linkage may need a Throttle Cable Plate Kit (#1490 for 289-302, #1491 for 351-W, #1493 for 351-C and 351-M/400, #1495 for 429/460). Q: What fuel can I run in it?A: Gasoline only. Edelbrock states that Performer Series carburetors are not calibrated for or compatible with alcohol, race fuel or E85 pump fuel, and that using those fuels will damage the carburetor and other fuel system components. Blended pump fuel is acceptable up to about 10% ethanol (E10); above that a richer calibration may be required. Q: Can I change the jets and metering rods myself?A: Yes. The metering rods, jets and step-up spring can be changed with the carburetor still on the engine — no removal and no draining of the fuel bowl. The carburetor ships factory-calibrated with orange (5 in-Hg) step-up springs, so start from the factory setting and change one step at a time. Related Products Related Blog Posts 📖 Related Guide Installing a Performer-pattern 4-barrel? Read our iFJF 1403 Performer 500 CFM 4-Barrel Carburetor Installation Guide for the full bolt-on sequence.
$419.99