Search results for "chevy/gmc"
iFJF iFJF 6PK2165 Serpentine Belt 6 Ribs 85.24" for Allante Camaro & More — EPDM Drive Belt
Product Overview The iFJF 6PK2165 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 85.24 inches (2165mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK2165 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Allante 1991-1992 Camaro 2012 LTD 1985 Mustang 1985-1986 Taurus 1994 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (85.24 inches / 2165mm) before purchasing. Technical Specifications Part Number 6PK2165 Rib Count 6 Ribs Effective Length 2165mm (85.24 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK2165, 5060210, K06210, 4060210 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2165mm (85.24" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 2165mm (85.24 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 85.24 inches, it will fit. The belt is compatible with Allante, Camaro, LTD and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK2165 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 83.46" for DeVille Eldorado & More 85.63" for Mariner Focus & More 81.69" for Camaro Lebaron & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$27.99
iFJF iFJF 4.8L 5.3L 6.0L LSX Silverado EGR Delete Plug Intake Exhaust Block Off Plate
Product Overview 4.8L 5.3L 6.0L LSX Silverado EGR Delete Plug Intake Exhaust Block Off Plate — precision-engineered block-off solution for off-road and competition vehicles. Eliminates the EGR (Exhaust Gas Recirculation) system, preventing hot exhaust gases from recirculating into your intake manifold. Removing this restriction reduces carbon buildup, lowers intake air temperatures, and improves engine efficiency. ⚠️ IMPORTANT: This product is intended for OFF-ROAD / COMPETITION USE ONLY. EGR system removal is not EPA-compliant for on-road vehicles. ECU tuning is REQUIRED to disable EGR-related DTCs. Key Features Complete Block-Off: CNC-machined plates/plugs seal all EGR ports — no exhaust or vacuum leaks. Heavy-Duty Material: Thick-gauge steel/aluminum with corrosion-resistant finish for high-temp durability. Reduced Carbon Buildup: Eliminates carbon deposits in intake manifold, throttle body, and intake valves. Lower Intake Temperatures: Significantly cooler intake air improves combustion efficiency. Complete Kit: All block-off plates, gaskets, bolts, and hardware for clean installation. Compatibility Year Make Engine Refer to product title. Contact support. Installation Overview Tools: Socket set, wrenches, screwdrivers, torque wrench Skill Level: Intermediate to advanced — mechanical experience recommended Time: 2-4 hours depending on vehicle Tuning Required: ECU recalibration MANDATORY to prevent CEL/limp mode Gaskets: New gaskets provided — always replace, never reuse Why Delete EGR? EGR recirculates exhaust gas to reduce NOx emissions. Over time, carbon deposits clog intake components — reducing airflow, power, and fuel economy. EGR removal (off-road only) eliminates these issues for cleaner airflow, lower engine temps, and improved throttle response. Frequently Asked Questions Q: Will this trigger a check engine light?A: Yes. EGR removal triggers DTCs. ECU tuning is REQUIRED to disable these codes. Hardware only — tuning sold separately. Q: Is this legal for street use?A: No. For OFF-ROAD / COMPETITION USE ONLY. Not EPA-compliant for on-road vehicles. Check local laws before purchase. Q: What's included in the kit?A: Block-off plates/plugs, replacement gaskets, installation hardware. Refer to product images for exact contents. Q: Should I remove the EGR cooler too?A: Recommended — cooler is non-functional without EGR flow. Some kits include cooler delete components. Q: What performance benefits can I expect?A: Lower intake temps, reduced carbon buildup, improved throttle response, slightly better fuel economy, more consistent performance under load. Q: Will this affect my turbo?A: No direct effect. Reduced carbon in intake helps maintain turbo efficiency over time. Shop with Confidence Add to cart. Ships fast from US warehouse. For off-road and competition use only.
$26.88
iFJF 6PK2375 Serpentine Belt 6 Ribs 93.50" for Park Avenue 1997-1998 — EPDM
Premium 6PK2375 EPDM serpentine belt — 6 ribs, 2375mm (93.5”) effective length. Fits Buick Park Avenue (1997-1998), Buick Regal (1998), Chevy Malibu (2008-2012), Chrysler Pacifica (2004-2006), Ford Mustang (2000-2004). EPDM rubber compound resists cracking and heat aging better than standard neoprene belts.Install guide: Serpentine Belt Replacement — Complete DIY Guide
$27.99
iFJF iFJF 6PK2060 Serpentine Belt 6 Ribs 80.1" for Cimarron Cavalier & More — EPDM Drive Belt
Product Overview The iFJF 6PK2060 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 80.1 inches (2060mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK2060 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Cimarron 1985-1986 Cavalier 1985-1986 Ranger 1994-1995 S15 Jimmy 1987-1988 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (80.1 inches / 2060mm) before purchasing. Technical Specifications Part Number 6PK2060 Rib Count 6 Ribs Effective Length 2060mm (80.1 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK2060, 5060200, K06200, 4060200 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2060mm (80.1" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 2060mm (80.1 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 80.1 inches, it will fit. The belt is compatible with Cimarron, Cavalier, Ranger and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK2060 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 80.71" for B4000 Navajo & More 81.38" for CTS DeVille & More 78.54" for X3 X5 & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$27.99
iFJF 1403 Performer 500 CFM 4-Barrel Carburetor Electric Choke Golden
Product Overview The iFJF 1403 Performer 500 CFM 4-barrel carburetor is a square-bore, electric-choke replacement for a worn Quadrajet or a factory EFI system that will not behave. Edelbrock calibrates the Performer Series for small-cubic-inch engines — 305 cu in and smaller Chevrolet and 302 cu in and smaller Ford — and the 4150-pattern flange bolts straight to a square-bore intake. The two-piece aluminum body delivers crisp throttle response and can be re-jetted without removing the carburetor. This is the golden-finish version, with no EGR provisions. Key Features ✓ 500 CFM Calibration For Small-Cubic-Inch V8s: Factory-calibrated for 305 cu in and smaller Chevrolet and 302 cu in and smaller Ford, plus dual-quad C-26 / F-28 applications. ✓ Electric Choke: A switched 12V feed gives clean cold starts without running a manual choke cable into the cabin. ✓ Vacuum Air-Valve Secondary: Edelbrock's Performer Series uses a vacuum-operated air valve secondary for progressive part-throttle response. ✓ Tunable Without Removing It: Metering rods, jets and the step-up spring can be changed on the engine — no fuel draining. ✓ Two-Piece Aluminum Body: The lightweight all-aluminum, two-piece body resists warping and is compatible with blended pump fuel. ✓ Bolt-On 4150 Square-Bore Flange: Fits square-bore intakes directly; timed and full vacuum ports are included for ignition advance. Vehicle Compatibility Direct Fit Any 4150 square-bore intake manifold Calibrated For 305 cu in and smaller Chevrolet; 302 cu in and smaller Ford Dual-Quad Edelbrock C-26, F-28 and Street Tunnel Ram manifolds Manifold Match Edelbrock Performer / Performer EPS, or similar design Adapter Required Spread-bore Quadrajet or Chrysler Thermoquad — Edelbrock #2696 / #2697 Not For Computer-controlled applications (some 1981+ GM Q-Jet, some 1981+ Ford AOD) Technical Specifications CFM Rating 500 CFM @ 1.5 inHg Barrel Configuration 4-Barrel, Square Bore (4150 pattern) Choke Type Electric (switched 12V) Secondary Type Vacuum-Controlled Air Valve Finish Golden Bore Diameter Primary 1.44" / Secondary 1.69" Main Venturi Diameter 1.19" Body Height 3.25" Mounting Flange Square Bore, 4150 pattern Material Aluminum (two-piece body) Vacuum Ports Timed and full vacuum ports included for ignition advance EGR Provisions None Fuel Type Gasoline — not calibrated for alcohol, race fuel or E85 Fuel Pressure 6.5 psi maximum; set an adjustable regulator to 5.5 psi Recommended Displacement 305 cu in and smaller Chevrolet; 302 cu in and smaller Ford; dual-quad C-26 / F-28 Included Square-bore base gasket, air horn gasket, air cleaner stud, red choke positive wire and black choke ground wire, 2 vacuum caps, vacuum tee, 1/4" NPT pipe plug, throttle cable ball-end stud with nut and star washer. Carburetor studs sold separately (Edelbrock #8008 or #8024). Why Choose iFJF? Quality Assurance: Every product undergoes rigorous quality inspection before shipping. USA-Based Inventory: Products ship from our US warehouse — no waiting for international freight. Expert Support: Our team knows automotive, truck, and RV parts. Real answers from real people. Fair Pricing: Premium quality without the premium markup — direct value to you. Hassle-Free Returns: 90-day return policy. If it doesn't fit or meet your expectations, we'll make it right. Backed by ISO 9001:2015 and IATF 16949:2016 quality management system certifications. Installation Tips Check fuel pressure before the first start — Edelbrock's limit is 6.5 psi, with a regulator set to 5.5 psi Fit a new square-bore base gasket and air horn gasket; Edelbrock's warranty is void if dirt found in the carburetor is traced to a missing filter Tighten the mounting nuts evenly over several steps — overtightening can distort the two-piece aluminum body Run the choke positive lead to a switched 12V source (Run position only) and ground the black wire to the carburetor body Cap every unused vacuum port using the supplied vacuum caps; plug an unused rear port with the supplied 1/4" NPT pipe plug Check for fuel and vacuum leaks before the first road test Frequently Asked Questions Q: Will this carburetor fit my engine?A: The 1403 is a square-bore carburetor with a 4150-pattern flange, so it bolts directly to any square-bore intake manifold. It is calibrated for small-cubic-inch engines — 305 cu in and smaller Chevrolet, 302 cu in and smaller Ford — and for dual-quad applications such as the Edelbrock C-26, F-28 and Street Tunnel Ram. A spread-bore intake such as a Quadrajet or Chrysler Thermoquad needs Edelbrock adapter #2696 (or adapter-and-fuel-line kit #2697). It is not for computer-controlled applications, which includes some 1981-and-later GM vehicles with a Q-Jet carburetor and some 1981-and-later Ford vehicles with an AOD transmission. Q: Is 500 CFM enough for my engine?A: Edelbrock builds the Performer Series around small-cubic-inch engines: this 500 CFM version for 305 cu in and smaller Chevrolet and 302 cu in and smaller Ford, and 600 CFM (such as #1406) for larger or higher-revving combinations. Match the CFM rating to the engine rather than fitting the biggest number available. Q: What fuel pressure does this carburetor need?A: Per Edelbrock's installation instructions, do not use more than 6.5 psi fuel pressure — excessive pressure causes flooding. The owner's manual adds that pressure at idle should not exceed 6.0 psi, that an adjustable regulator should be set to 5.5 psi, and that pressure should not drop below 2.0 psi at high rpm and wide-open throttle. A regulator such as Edelbrock #8190 is used if the pump runs higher. Q: Do I need an adapter or a throttle linkage kit?A: No adapter is needed on a square-bore intake. A spread-bore Quadrajet or Chrysler Thermoquad intake needs Edelbrock adapter #2696 or kit #2697. Connect the electric choke to a switched 12V source (Run position only) and ground it to the carburetor body. The throttle cable ball-end stud is removable and is installed in the position your linkage requires; 1977-and-later Chevrolet applications use the Edelbrock #8009 throttle cable adapter stud. Ford vehicles with an automatic transmission need Throttle Lever Kit #1483, Chrysler vehicles with an automatic need Throttle Lever Kit #1481, and Ford cable linkage may need a Throttle Cable Plate Kit (#1490 for 289-302, #1491 for 351-W, #1493 for 351-C and 351-M/400, #1495 for 429/460). Q: What fuel can I run in it?A: Gasoline only. Edelbrock states that Performer Series carburetors are not calibrated for or compatible with alcohol, race fuel or E85 pump fuel, and that using those fuels will damage the carburetor and other fuel system components. Blended pump fuel is acceptable up to about 10% ethanol (E10); above that a richer calibration may be required. Q: Can I change the jets and metering rods myself?A: Yes. The metering rods, jets and step-up spring can be changed with the carburetor still on the engine — no removal and no draining of the fuel bowl. The carburetor ships factory-calibrated with orange (5 in-Hg) step-up springs, so start from the factory setting and change one step at a time. Related Products Related Blog Posts 📖 Related Guide Installing a Performer-pattern 4-barrel? Read our iFJF 1403 Performer 500 CFM 4-Barrel Carburetor Installation Guide for the full bolt-on sequence.
$419.99
iFJF iFJF 6PK2070 Serpentine Belt 6 Ribs 81.5" for CTS DeVille & More — EPDM Drive Belt
Product Overview The iFJF 6PK2070 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 81.5 inches (2070mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK2070 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years CTS 2004-2007 DeVille 2000-2005 Seville 1998-2004 Challenger 2008-2010 Charger 2006-2010 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (81.5 inches / 2070mm) before purchasing. Technical Specifications Part Number 6PK2070 Rib Count 6 Ribs Effective Length 2070mm (81.5 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK2070, 5060200, K06200, 4060200 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 2070mm (81.5" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 2070mm (81.5 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 81.5 inches, it will fit. The belt is compatible with CTS, DeVille, Seville and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK2070 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 81.38" for CTS DeVille & More 81.69" for Camaro Lebaron & More 80.1" for Cimarron Cavalier & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$27.99
iFJF iFJF 6PK1955 Serpentine Belt 6 Ribs 76.97" for Century Camaro & More — EPDM Drive Belt
Product Overview The iFJF 6PK1955 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 76.97 inches (1955mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK1955 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Century 1987-1992 Camaro 1994-1995 Celebrity 1987-1990 Lumina 1991-1992 FX50 2009 Alero 2000 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (76.97 inches / 1955mm) before purchasing. Technical Specifications Part Number 6PK1955 Rib Count 6 Ribs Effective Length 1955mm (76.97 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK1955, 5060190, K06190, 4060190 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 1955mm (76.97" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 1955mm (76.97 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 76.97 inches, it will fit. The belt is compatible with Century, Camaro, Celebrity and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK1955 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 75.98" for Astro Monaco & More 77.56" for Camaro Escape & More 77.95" for Lacrosse Regal & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$25.99
iFJF iFJF 6PK1970 Serpentine Belt 6 Ribs 77.56" for Camaro Escape & More — EPDM Drive Belt
Product Overview The iFJF 6PK1970 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 77.56 inches (1970mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK1970 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Camaro 1993-1995 Escape 2001 F-100 1982-1983 Focus 2000-2004 Granada 1982 LTD 1983-1986 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (77.56 inches / 1970mm) before purchasing. Technical Specifications Part Number 6PK1970 Rib Count 6 Ribs Effective Length 1970mm (77.56 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK1970, 5060190, K06190, 4060190 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 1970mm (77.56" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 1970mm (77.56 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 77.56 inches, it will fit. The belt is compatible with Camaro, Escape, F-100 and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK1970 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 76.97" for Century Camaro & More 77.95" for Lacrosse Regal & More 75.98" for Astro Monaco & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$25.99
iFJF iFJF Flexible Stainless Transmission Dipstick Compatible/Replacement for Chevy TH-350/TH-400 Turbo SBC BBC 530mm -Firewall Mount (Black)
Flexible Stainless Steel Transmission Dipstick — Chevy Tahoe / Suburban 4L60E Upgrade your transmission fluid maintenance with this flexible stainless steel braided dipstick. Designed as a direct replacement for the rigid factory dipstick tube on Chevy Tahoe and Suburban models with the 4L60E transmission, this flexible design makes checking and filling transmission fluid dramatically easier — especially on lifted trucks, modified exhaust setups, or simply for routine maintenance. Key Features Flexible Braided Stainless Steel: Routes easily around headers, exhaust pipes, and body modifications — no more fighting a rigid dipstick tube Corrosion-Proof Construction: 304 stainless steel braided exterior won't rust, pit, or degrade from road salt or fluid exposure Precision-Marked Dipstick: Clear HOT and COLD level markings for accurate fluid readings every time Leak-Free Seal: O-ring sealed at the transmission case entry point — no weeping, no drips Easy Install: Replaces the factory dipstick tube in 15-20 minutes with basic hand tools Specifications Specification Detail Vehicle Chevy Tahoe / Suburban Transmission 4L60E Automatic Material 304 Stainless Steel Braided / Chrome-Plated Handle Installation Direct Replacement (No Modification Needed) Benefits Over Factory Dipstick No More Kinked Tubes: Factory rigid tubes often kink when reinstalling after transmission work — flexible stainless eliminates this Heat Resistance: Stainless braid handles proximity to exhaust headers without melting or degrading Custom Routing: Need to route around an aftermarket crossmember or long-tube headers? Flexible design gives you options Professional Look: Braided stainless finish looks great at shows and under the hood Frequently Asked Questions Q: Will this work with my aftermarket transmission pan?A: The dipstick enters at the transmission case, not the pan, so aftermarket pans don't affect fitment. The dipstick tube seals at the case entry point. Q: Do I need to drain the transmission fluid to install?A: No. The dipstick tube enters above the fluid level. You can install without draining. Have a rag handy for any residual fluid in the old tube. Q: How accurate are the fluid level markings?A: The dipstick is calibrated to match OEM fluid level specifications. Always check fluid with the transmission at operating temperature, engine running, on level ground. Q: Will this fit my lifted truck?A: Yes — the flexible design is particularly beneficial for lifted trucks where the factory rigid tube may be under stress or difficult to access. 🔗 Explore More from iFJF Find the right part for your vehicle or equipment: Browse All Products Fuel Filters Collection Auto Accessories
$42.99
iFJF iFJF 0-4412S Carburetor Replacement for 2300 500 CFM 2 Barrel Manual Choke GMC CJ5 CJ7 F100 Carburetors (Golden)
Product Overview High-quality aftermarket 0-4412S Carburetor Replacement — precision-engineered for reliable fuel/air metering and direct bolt-on fitment. Manufactured to meet or exceed OEM specifications at a fraction of dealer pricing. Key Features Precision Manufacturing: CNC-machined components ensure exact tolerances and smooth throttle response OEM-Spec Materials: Constructed from durable die-cast aluminum and corrosion-resistant components that withstand high temperatures and fuel exposure Direct Fitment: Designed as a direct bolt-on replacement — no modifications or adapters required for installation Flow-Tested: Each unit undergoes quality control testing to verify proper fuel and air metering calibration Complete Assembly: Comes fully assembled and pre-adjusted for out-of-the-box installation — saves hours of setup time Compatibility Information This carburetor & fuel system is designed to replace the factory original equipment on compatible vehicles. Please verify your vehicle's year, make, model, and engine specifications before ordering. Contact our support team if you need assistance confirming fitment for your specific application. Technical Specifications Specification Details Product Type Carburetor & Fuel System Condition New Aftermarket Installation Direct Bolt-On Replacement Warranty 1-Year Replacement Warranty Shipping Same-Day on Orders Before 2 PM EST Why Choose iFJF Direct? At iFJF Direct, we specialize in high-quality aftermarket automotive parts for gasoline and diesel engines. Every product is sourced from trusted manufacturers and backed by our satisfaction guarantee. We stock inventory in our US warehouse and ship same-day on orders placed before 2 PM EST. Installation Tips Always disconnect the battery before starting any fuel system work Use new gaskets and seals — reusing old gaskets is the #1 cause of vacuum leaks and poor idle Double-check all linkage connections and throttle operation before starting the engine Perform a final fuel leak check after installation with the engine running at idle and under throttle Allow a short break-in period for gaskets to fully seat before final tuning adjustments Frequently Asked Questions Q: Will this fit my vehicle?A: Please verify your specific year, make, model, and engine against the compatibility information listed in the product title. If unsure, contact our support team with your VIN. Q: Is this a genuine OEM part?A: This is a high-quality aftermarket replacement manufactured to OEM specifications. It offers equivalent or superior performance at significantly lower cost than OEM dealer parts. Q: Does this come pre-tuned?A: Yes, the unit comes pre-adjusted from the factory for typical applications. Minor idle mixture and speed adjustments may be needed for your specific engine setup and altitude. Q: What's included in the box?A: The complete assembly as shown in product images, mounting gasket(s), and basic installation instructions. Verify included components match your application before installation. Q: What is your return policy?A: 90-day return policy for unused items in original packaging. Defective products covered under 1-year warranty. See our Returns page for full details.
$399.99
iFJF CF197 Carbon Cabin Filter for 2011-2019 Cruze Cascada SRX 1.4L 1.6L
Overview The CF197 Carbon Cabin Air Filter delivers cleaner, fresher air for your GM compact and crossover vehicles. Designed as a direct OEM replacement, this filter combines high-efficiency particulate capture with an activated carbon layer that neutralizes exhaust fumes, pollen, and urban air pollutants. Whether commuting in a Cruze, enjoying open-top driving in a Cascada, or hauling family in an SRX, this filter makes every trip more comfortable. Key Features Activated Carbon Media: Absorbs outside odors, diesel fumes, and VOCs for fresher cabin air Triple-Layer Construction: Pre-filter + electrostatic middle layer + carbon-impregnated final layer Wide GM Compatibility: Fits multiple GM global platforms — Cruze, Cascada, SRX, Orlando OEM Replacement: Direct cross for 13271190, CF197, CUK2442 Easy Access: Filter located behind glovebox — DIY in 5-10 minutes Compatibility Table Brand Model Engine Year Range Chevrolet Cruze 1.4L Turbo / 1.8L 2011-2019 Chevrolet Cruze Limited 1.4L Turbo / 1.8L 2016 Buick Cascada 1.6L Turbo 2016-2019 Cadillac SRX 3.6L V6 2012-2016 Chevrolet Orlando 2.4L 2012-2014 Specifications Spec Value Part Number CF197, 13271190, CUK2442 Filter Type Cabin Air — Activated Carbon Dimensions ~240mm × ~200mm × ~30mm Replacement Interval Every 12,000-15,000 miles or 12 months Why Replace Your Cabin Filter? Health: A clogged filter recirculates mold spores, bacteria, and allergens AC Performance: Restricted airflow forces the blower motor to work harder, reducing cooling efficiency Defrosting: A fresh filter improves windshield defogging in winter by allowing better airflow Resale Value: A clean-smelling cabin creates a better impression for potential buyers FAQ Q: Does this fit the 2014 Chevy Cruze diesel?A: Yes. The CF197 fits all 2011-2019 Cruze models including the 2.0L turbo diesel variant. The cabin filter housing is identical across all Cruze powertrains. Q: How do I access the cabin filter on a Cruze?A: Open the glovebox, squeeze the sides inward to release the stops, let it drop down. The filter tray is behind a rectangular plastic cover. Slide out the old filter, insert the new one (arrow pointing toward the blower), and reassemble. Q: What causes the musty smell when I turn on the AC?A: A saturated cabin filter combined with moisture on the evaporator coil creates the perfect breeding ground for mold and bacteria. Replacing the cabin filter and running the fan on high for 5 minutes after AC use helps prevent this.
$39.99
iFJF iFJF Hand-Mic Mount Base for FTM-300DR FTM-300 FTM-7250DR FTM-7250 for Wrangler Chevy FD Off-Road SUV (Yellow)
Overview Keep your communications gear exactly where you need it with the iFJF Hand-Mic Mount Base in Yellow. Designed for off-road enthusiasts who demand reliable radio communication this mount securely holds your Yaesu handheld microphone whether you are crawling rocks in Moab or navigating backcountry trails. The yellow finish adds a custom touch to your Jeep Wrangler Chevy SUV or other off-road vehicle interior. Compatibility Category Compatible Models Radio Models Yaesu FTM-300DR FTM-300 FTM-7250DR FTM-7250 FTM-400DR FT-450D Vehicle Fitment Jeep Wrangler JK/JKU/JL/JLU/YJ/TJ Chevy Off-Road SUVs FD Off-Road SUVs Mounting Location Roll Bar Dashboard Center Console Key Features Wide Radio Compatibility: Specifically designed for Yaesu FTM-series mobile radios including FTM-300DR FTM-7250DR FTM-400DR and FT-450D Secure Off-Road Grip: Heavy-duty clamping mechanism prevents microphone movement during aggressive off-road driving and vibration Premium Yellow Finish: Durable powder-coated finish provides corrosion resistance and adds a custom interior accent Versatile Mounting: Compatible with roll bar and dashboard mounting locations for optimal positioning Rugged Construction: Built from high-strength materials to withstand dust mud vibration and extreme temperatures Quick Microphone Access: Ergonomic design allows for fast one-hand microphone removal when you need to communicate Technical Specifications Specification Value Color Yellow (Powder Coated) Compatible Radios Yaesu FTM-300DR/FTM-300/FTM-7250DR/FTM-7250/FTM-400DR/FT-450D Mounting Style Roll Bar / Dashboard Clamp Material High-Strength Alloy Steel with Powder Coat Package Includes 1x Hand-Mic Mount Base Installation Choose Location: Select a mounting point on your roll bar or dashboard within easy reach of the driver seat Position Mount: Place the mount base at the desired location and align Secure Mount: Attach using appropriate hardware for your specific mounting surface (hardware not included — varies by vehicle) Insert Microphone: Slide your Yaesu handheld microphone into the mount until it clicks Test Fit: Give the microphone a gentle tug to ensure it is securely held. Test during vehicle operation to verify vibration resistance Why Choose iFJF? Off-Road Tested: iFJF products are designed by off-roaders for off-roaders — we understand the punishment your gear takes on the trail Radio-Specific Design: Unlike universal mounts this base is engineered specifically for Yaesu FTM-series microphones for a perfect fit Multiple Color Options: Also available in Red Black Blue Silver and Yellow to match your interior theme Affordable Quality: Get professional-grade mounting hardware without the premium price tag FAQ Q: Does this include the microphone?A: No this is the mount base only. The Yaesu handheld microphone is sold separately. Q: Will it fit other radio brands like Kenwood or Icom?A: This mount is specifically designed for Yaesu handheld microphones with the standard FTM-series mounting pattern. Other brands may not fit correctly. Q: What hardware do I need for installation?A: The mount base accepts standard mounting hardware. Specific bolts/screws needed depend on your mounting location. Most roll bar mounts use hose clamps or U-bolts (not included). Q: Can I install this on my Jeep grab handle?A: While designed primarily for roll bars the mount can be adapted to other locations. Ensure the mounting surface can support the microphone weight during off-road vibration. Q: Is the finish fade-resistant?A: Yes the powder-coated finish is UV-resistant and designed to maintain its color even with prolonged sun exposure. Q: Can it be used for right or left-hand operation?A: The mount is ambidextrous — it can be positioned for either right or left-hand microphone access depending on mounting orientation.
$23.99