Search results for "chevy/gmc"
iFJF iFJF Magnetic Microphone Hand-Mic Mount Base for FTM-300DR FTM-300 FTM-7250DR FTM-7250 FTM-400DR FT-450D for Wrangler Chevy FD Off-Road SUV (Silver)
Overview Take your trail communications to the next level with the iFJF Magnetic Hand-Mic Mount Base in Silver. This innovative mount uses a powerful magnetic quick-release mechanism that lets you grab your Yaesu microphone instantly when you need to communicate and snap it back just as fast when done. The elegant silver finish adds a premium touch to your Jeep Wrangler Chevy off-road SUV or any adventure vehicle. Compatibility Category Compatible Models Radio Models Yaesu FTM-300DR FTM-300 FTM-7250DR FTM-7250 FTM-400DR FT-450D Vehicle Fitment Jeep Wrangler JK/JKU/JL/JLU/YJ/TJ Chevy Off-Road SUVs FD Off-Road SUVs Mounting Location Roll Bar Dashboard Center Console Key Features Magnetic Quick-Release: Powerful neodymium magnets provide instant grab-and-go functionality — no clips or latches to fumble with Wide Yaesu Compatibility: Engineered for FTM-300DR FTM-7250DR FTM-400DR and FT-450D handheld microphones Premium Silver Finish: Electroplated silver coating delivers sophisticated look with superior corrosion resistance Secure Off-Road Hold: High-strength magnetic connection keeps the microphone firmly in place during aggressive trail driving Versatile Installation: Mounts on roll bars and dashboards for optimal communication positioning Rugged Construction: Built to withstand dust mud moisture and the harsh realities of off-road adventures Technical Specifications Specification Value Color Silver (Electroplated) Compatible Radios Yaesu FTM-300DR/FTM-300/FTM-7250DR/FTM-7250/FTM-400DR/FT-450D Mounting Style Magnetic Quick-Release / Roll Bar Clamp Magnet Type Neodymium (High-Strength Rare Earth) Material High-Strength Alloy Steel with Silver Electroplate Package Includes 1x Magnetic Hand-Mic Mount Base 1x Magnetic Mic Plate Installation Select Location: Choose a mounting point on your roll bar or dashboard easily accessible to the driver Attach Magnetic Plate: Affix the included magnetic plate to the back of your Yaesu handheld microphone Secure Mount Base: Fasten the mount base to your chosen location using appropriate hardware (varies by vehicle) Test Magnetic Hold: Place the microphone on the mount — the magnets should engage firmly and hold securely Trail Test: Drive over bumpy terrain to verify the magnetic connection maintains solid grip under vibration Why Choose iFJF? Magnetic Innovation: Unlike traditional clip mounts that wear out the magnetic system maintains consistent holding force Instant Communication: Magnetic quick-release lets you grab your microphone in a split second — critical off-road Off-Road Tested: iFJF products developed and tested by actual off-road enthusiasts Complete Package: Includes both the mount base and magnetic microphone plate — everything needed for installation FAQ Q: Does the magnet interfere with radio signal?A: No neodymium magnets are positioned away from the antenna and do not affect transmission or reception quality. Q: Will the magnet hold on very rough trails?A: High-strength neodymium magnets are rated to hold securely through aggressive off-road conditions including rock crawling and desert running. Q: Do I need to modify my microphone?A: The kit includes an adhesive-backed magnetic plate that attaches to the back of your microphone. No permanent modification required. Q: Can I use with non-Yaesu radio microphones?A: The magnetic plate is designed for Yaesu FTM-series microphone form factor. Other brands may require modification for the plate to fit. Q: Does the magnet lose strength over time?A: Neodymium magnets maintain their strength essentially permanently under normal use conditions and vehicle temperature ranges.
$23.99
iFJF CCV Reroute + EGR Delete Kit for 2011-2019 Ford 6.7L Powerstroke — Super Duty
Product Overview The iFJF EGR Delete Kit for 2011-2019 Ford 6.7L Powerstroke F-250, F-350, F-450, F-550 Super Duty is a complete solution to permanently eliminate the troublesome Exhaust Gas Recirculation (EGR) system. The factory EGR system routes hot, soot-laden exhaust gas back into the intake manifold — causing carbon buildup, reduced engine efficiency, and premature component wear. When the EGR cooler fails (a common issue on the 6.7L Powerstroke), it can leak coolant into the intake, risking catastrophic engine damage. Our kit completely removes the EGR valve(s) and cooler(s), replaces them with precision CNC-machined billet aluminum and stainless steel block-off components, and restores clean, unobstructed airflow to your engine. Every component is engineered for exact OEM fitment — no cutting, welding, or permanent modifications required. Kit Components — What's Included Component Material Function EGR Valve Delete Plate / Block-Off CNC Billet 6061-T6 Aluminum Blocks exhaust gas recirculation at the valve port, preventing hot sooty gases from re-entering the intake EGR Cooler Delete / Bypass 304 Stainless Steel + T6061 Aluminum Completely removes the failure-prone EGR cooler from the coolant circuit CCV/PCV Reroute Hose & Fittings Oil-Resistant Nitrile Rubber + Aluminum Reroutes crankcase vapors away from the intake tract, preventing oil mist contamination Intake Block-Off Gaskets Multi-Layer Steel (MLS) High-temperature seal for clean, leak-free installation Mounting Hardware Kit Grade 10.9 Zinc-Plated Steel Complete bolt/washer/nut set — no hardware store trips needed Key Features Complete EGR System Removal: Includes all block-off plates, delete pipes, gaskets, and hardware to fully eliminate the EGR valve and cooler from your 6.7L Powerstroke. CNC Billet 6061-T6 Aluminum Construction: Precision-machined from aerospace-grade aluminum — far stronger and more durable than cast alternatives. Black anodized finish for corrosion resistance. 304 Stainless Steel Components: Cooler delete pipes and block-off plates use 304-grade stainless steel where required for maximum heat tolerance and longevity. OEM-Grade Gaskets & Seals: Multi-layer steel (MLS) and high-temperature composite gaskets ensure a perfect, leak-free seal — no exhaust or coolant leaks after installation. Direct Bolt-On Installation: All components use existing mounting points and hardware locations. Average install time: 4-6 hours with basic hand tools. Prevents Coolant Contamination: By removing the EGR cooler from the coolant circuit, you eliminate the risk of coolant leaking into the intake — one of the most common 6.7L catastrophic failures. Compatibility Chart Year Make Model Engine Trim Notes 2011-2023 Ford F-250 Super Duty 6.7L Powerstroke V8 Turbo Diesel All trims (XL, XLT, Lariat, King Ranch, Platinum, Limited) 2011-2023 Ford F-350 Super Duty 6.7L Powerstroke V8 Turbo Diesel All trims; Single & Dual Rear Wheel 2011-2023 Ford F-450 Super Duty 6.7L Powerstroke V8 Turbo Diesel Chassis Cab & Pickup 2011-2023 Ford F-550 Super Duty 6.7L Powerstroke V8 Turbo Diesel Chassis Cab Specifications Specification Detail Material CNC Billet 6061-T6 Aluminum, 304 Stainless Steel, High-Temp MLS Gaskets Finish Black Anodized (Aluminum); Natural (Stainless Steel) Fitment Type Direct Bolt-On — No Modification Required Estimated Install Time 4-6 Hours (Professional); 6-8 Hours (DIY) Includes Hardware Yes — Complete Grade 10.9 bolt/washer/nut kit included Includes Gaskets Yes — MLS & high-temp composite gaskets Warranty 1-Year Limited Warranty Why Choose iFJF? Precision Engineering: Every component is reverse-engineered from OEM dimensions for guaranteed fit. No "universal fit" guesswork. Proven Materials: We use 6061-T6 billet aluminum and 304 stainless steel — not cheap cast pot metal that cracks under heat cycling. Complete Kit: Everything you need in one box. No extra parts to source, no trips to the hardware store. US-Based Support: Our diesel experts are available to answer installation questions. We actually know these trucks. Frequently Asked Questions Q: Will this kit fit my 2011 Ford F-250 6.7L Powerstroke?A: Yes. This kit is specifically designed for 2011-2019 Ford Super Duty trucks equipped with the 6.7L Powerstroke V8 turbo diesel engine, including F-250, F-350, F-450, and F-550 models. Q: Does installing an EGR delete require tuning?A: Yes — removing the EGR system will trigger a check engine light (CEL) unless the ECU is tuned to disable EGR-related DTCs. A custom tuner or EFI Live-compatible device is required. This kit includes the mechanical components only. Q: Will this void my factory warranty?A: Modifying the emissions system may affect your factory powertrain warranty coverage. We recommend consulting your dealer or warranty provider before installation. This product is intended for off-road/competition use. Q: How difficult is the installation?A: The installation is rated moderate to advanced. You'll need basic hand tools (socket set, wrenches, torque wrench), and mechanical experience with diesel engines is strongly recommended. Professional installation typically takes 4-6 hours. Q: What symptoms tell me my EGR cooler is failing?A: Common signs include: white smoke from the exhaust (coolant burning), unexplained coolant loss, coolant in the oil (milky oil appearance), rough idle, and P0401/P0402 error codes. If you notice these, your EGR cooler may already be leaking — immediate replacement or deletion is recommended. Q: Can I still pass emissions testing after installing this kit?A: This kit is designed for off-road and competition use only. Removing emissions equipment is not compliant with EPA/CARB regulations for on-road vehicles. Check your local and state regulations before purchase. Q: What other maintenance should I consider while installing this kit?A: While the intake is accessible, it's a great opportunity to clean the intake manifold, inspect turbo piping, and consider upgrading to a coolant filtration system. Check out our other 6.7L Powerstroke products for complete engine protection. Q: What's the difference between the EGR valve delete and EGR cooler delete?A: The valve delete blocks exhaust gases from entering the intake at the EGR valve port. The cooler delete removes the EGR cooler entirely from the coolant circuit — this is critical because a failed cooler can leak coolant into the intake and cause hydrolock. Our kit includes both. California Proposition 65 Warning: This product is intended for off-road/competition use only. Not CARB-compliant. Check local regulations before purchase.
$271.09
XcargoFix Modular Truck Bed Mat Kit for Pickup Trucks — Custom-Fit Bed Protection
Product Overview The XcargoFix Modular Truck Bed Mat Kit is a custom-fit, modular truck bed protection system engineered to guard your bed from scratches, dents, and cargo damage. Built from durable, precision-cut mats that lock together to cover your truck bed, this kit is matched to your exact vehicle using your year, make and model — so you get a perfect fit, every time. Suitable for mid-size pickup trucks. Each Advanced Kit includes fully fitted mats matching the truck bed size, 1 handle assembly, 6 metal latches, 4 stoppers, 1 strap and 32 mat rollers. Available in Mid-Size and Full-Size fitments, in both Basic and Advanced kit levels — pick your configuration above. ⚠️ IMPORTANT — PLEASE READ BEFORE ORDERING: In production: This item is already in production. Orders ship in approximately 1 month after order confirmation. Shipping & duties: Our listed price includes shipping to the United States. For other countries, our customer service team will contact you after you place your order — there may be an additional shipping fee, and any import duties or taxes levied by your country are the customer’s responsibility. Tell us your truck: Enter your year, make and model at checkout so we can match the correct configuration to your truck. We confirm with you before we ship: After you place your order, please watch your email inbox. Our customer service team will contact you to double-check your truck model before shipping, so you always receive the right kit — no wrong-fit surprises. Key Features Custom Fit by Vehicle — Every kit is matched to your exact truck using your year, make and model. No guessing, no universal gaps — your mats are built for your specific vehicle. Modular Building-Block Design — A unique interlocking grid system that lets you freely customize, secure and arrange cargo stoppers and accessories, so your gear stops sliding in transit. Heavy-Duty PP Construction — Made from tough polypropylene (PP), engineered to handle heavy cargo, tools, and job-site loads without cracking or deforming. Anti-Slip Surface — Textured top surface grips your cargo and keeps items from sliding while you drive. Modular Panel System — Standard mats, vertical half mats, and side strip mats combine to cover any bed layout with edge-to-edge protection. Interlocking Slots — Precision-molded connection slots keep mats firmly locked together — no shifting, no rattling, no gaps. Anti-Slip · Anti-Shock · Moisture-Resistant — The raised slot structure cushions vibration, resists moisture, and keeps cargo stable on every road. Smooth-Glide Rollers — Embedded POM rollers (Advanced Kit) let heavy cargo slide smoothly across the mat for easier loading and unloading. Cargo Management System — Dedicated stoppers, straps and roller assemblies let you load, slide, lock and organise heavy coolers, toolboxes and storage crates with one hand. Two Kit Levels — Choose the Basic Kit for essential bed protection, or the Advanced Kit with latches, stoppers, a strap, and rollers for a fully secured setup. Direct Fit Installation — Designed for simple, intuitive assembly with basic hand tools — no permanent vehicle modifications required. Complete Bed Protection — Protects the bed floor, walls, and edges from dents, scratches, and rust. Comprehensive Warranty — Covered by iFJF’s standard warranty against manufacturing defects, with dedicated customer support available to answer your questions. How It Works Tell us your truck — Enter your year, make and model at checkout. We’ll match the exact mat configuration to your truck, build your kit, and ship it to you. We confirm before shipping — Our team emails you to double-check the model, so there is no chance of sending the wrong fit. Install in minutes — Mats lock together by hand. No drilling, no permanent modification, no special tools. Compatibility Size Fits Example Models Mid Size Mid-size pickup trucks Ford Ranger, Toyota Tacoma Full Size Full-size pickup trucks Ford F-150 Raptor, Chevy Silverado The examples above are for reference only and are not a complete list. We support a wide range of pickup trucks. Whatever your brand or model, simply tell us your year, make and model at checkout and we’ll match the exact configuration to your truck. Package Includes Basic Kit: Standard Mat (PP) — The main modular mat panels that cover the truck bed floor. 307 × 307 × 18 mm, heavy-duty polypropylene with an anti-slip textured surface. Metal Latch — Rugged metal latch (45 × 69 × 4.5 mm) that inserts into the mat base in 3 quick steps, locking mats firmly in place — holds heavy loads without shifting. Vertical Half Mat (PP) — Half-width panels (307 × 107 × 18 mm) that fill gaps and fine-tune the fit along the bed edges. Included as needed — quantity matched to your truck. Side Strip Mats (PP) — Male-end and female-end edge pieces (307 × 43 / 40 × 18 mm) that lock along the bed walls. Included as needed — quantity matched to your truck. Handle Assembly — For easy installation, removal, and repositioning of the mats. Advanced Kit (includes everything in the Basic Kit, plus): Stopper (PE) — Durable stopper block (95 × 65 × 37 mm) that pushes into the slot by hand — no tools needed. Keeps cargo from sliding in any direction. Strap — High-strength polyester tie-down strap (2300 × 25 mm) with multi-point fixation. Secures coolers, boxes, and gear without drilling. Mat Roller (POM) — Low-friction rollers embedded in the mat base, letting heavy cargo slide smoothly across the mat for easier loading and unloading. Note: Every kit is built to fit your specific vehicle. The quantity of each component is matched to your truck using your year, make and model, so you always receive the correct configuration for your bed size. Specifications Spec Value Mat Material Polypropylene (PP) Stopper Material PE Roller Material POM (low-friction) Latch Material Metal Strap High-strength polyester, 2300 × 25 mm Standard Mat Size 307 × 307 × 18 mm (12.1" × 12.1" × 0.7") Vertical Half Mat Size 307 × 107 × 18 mm Side Strip Mat Size 307 × 43 / 40 × 18 mm Vehicle Type Mid-Size Pickup Trucks Application Truck Bed Cargo Management & Floor Protection Fitment Custom-matched by year, make & model Kit Levels Basic / Advanced Sizes Mid Size / Full Size Installation Modular interlocking assembly Availability Worldwide — US price includes shipping Lead Time In production — ships in approx. 1 month Why XcargoFix Feature XcargoFix Fixed Bed Dividers Ordinary Bed Mats Custom fit to your exact truck ✓ (by vehicle) ✗ ✗ Modular & reconfigurable ✓ ✗ Fixed positions ✗ Anti-slip, anti-shift surface ✓ Varies ✗ Protects floor, walls & edges ✓ Partial Floor only Slide-out cargo access (rollers) ✓ (Advanced) ✗ ✗ Why Choose iFJF Direct? At iFJF Direct, we specialize in providing truck enthusiasts and outdoor adventurers with premium aftermarket accessories that deliver genuine utility and value. Every product we sell is carefully designed for durability, tested for real-world functionality, and backed by our commitment to customer satisfaction. Whether you’re hauling tools to the job site, loading camping gear for a weekend getaway, or organizing daily cargo, iFJF has the gear you need with the quality you can trust. Frequently Asked Questions Q: Will this fit my truck? A: Yes — we match every kit to your exact vehicle using your year, make and model. Choose Mid Size or Full Size to narrow it down, then enter your year, make and model at checkout and we’ll build the correct configuration for your truck. We’ll also email you before shipping to confirm the model. Q: How do I know whether to choose Mid Size or Full Size? A: Mid Size fits mid-size pickups (e.g. Ford Ranger, Toyota Tacoma), while Full Size fits full-size pickups (e.g. Ford F-150 Raptor, Chevy Silverado). If you’re unsure, enter your year, make and model at checkout and we’ll confirm the correct size for you. Q: Why do you need my year, make and model? A: The number of mats included depends on your exact vehicle model. Your year, make and model let us identify your truck and build the precise mat configuration so you get a perfect fit. Before shipping, our team will email you to confirm the model once more. Q: How do the stoppers and accessories work with the mat? A: The mat works like a modular grid pad. You place the included stoppers into the grid channels at strategic points around your cargo (coolers, toolboxes, storage crates) and secure them with the strap, so nothing shifts while you drive. Q: What is included with my purchase? A: The Advanced Kit comes with the fitted modular mats, 1 handle assembly, 6 metal latches, 4 cargo stoppers, 1 tie-down strap and 32 mat rollers. The Basic Kit includes the mats, latch and handle assembly without the stoppers, strap and rollers. Q: Is the kit difficult to install? A: No — the modular design assembles by hand without special tools. Mats lock together and are held in place with the included handle assembly (and, on the Advanced Kit, latches, stoppers, and a strap). Q: When will my order ship? A: This item is already in production. Orders ship in approximately 1 month after confirmation. Warranty & Support Contact us with any questions about fitment or your order. After you place an order, please watch your email inbox — our customer service team will reach out to confirm your truck model before we ship, so you always get the right kit. Every product is backed by our warranty against manufacturing defects and supported by our knowledgeable customer service team. Protect your truck bed the right way — order your XcargoFix Modular Mat Kit today!
$359.00 - $399.00
iFJF Stage 2 EGR Delete Block-Off Plate for 2010+ Cummins ISX15 CM2250/CM2350
Product Overview The iFJF Stage 2 EGR Block-Off Plate for the Cummins ISX15 CM2250/CM2350 (2010-Present) permanently eliminates EGR-related failures on your heavy-duty diesel engine. CNC-machined from 6061-T6 billet aluminum with a black anodized finish, this kit replaces the failure-prone factory EGR system with a bulletproof solution that improves reliability, reduces maintenance costs, and extends engine life. Why Delete Your EGR System? The factory EGR (Exhaust Gas Recirculation) system is a known failure point that causes: Coolant Contamination: EGR cooler failure introduces coolant into the intake, risking hydro-lock and catastrophic engine damage Carbon Buildup: Soot recirculation clogs the intake manifold, EGR valve, and turbocharger Overheating: Excessive EGTs stress the cooling system and degrade engine oil Reduced Fuel Economy: Inert exhaust gas displaces oxygen, causing incomplete combustion Turbocharger Damage: Carbon deposits accelerate turbo bearing and seal wear Key Features CNC-Machined 6061-T6 Billet: Precision-engineered, zero modifications required Black Anodized Finish: Corrosion-resistant, withstands extreme under-hood temperatures Complete Kit: All plates, plugs, gaskets, and hardware included OEM-Equivalent Tolerance: Leak-free seal at every port High-Temperature Rated: Sustained 1,200 deg F without warping Compatibility Engine Years Applications Cummins ISX15 CM2250/CM2350 (2010-Present) 2010-Present Freightliner Cascadia, Kenworth T680/T880, Peterbilt 579/389, International ProStar/LT, Volvo VNL, Western Star 4900 Specifications Spec Detail Material 6061-T6 Billet Aluminum Finish Black Anodized (MIL-A-8625 Type II) Kit Type Stage 2 Block-Off Plate Installation Bolt-On (professional install recommended) Gaskets High-temperature MLS gaskets included Hardware Grade 10.9 bolts & hardened washers Installation Notes This EGR delete kit is designed for off-road and competition use only. Professional installation recommended — access requires removal of intake and exhaust manifold components. Typical install time: 3-5 hours. ECU tuning/delete programming may be required to prevent check engine codes. Frequently Asked Questions Q: Will this fit my engine?A: Yes. This Block-Off Plate is specifically designed for the Cummins ISX15 CM2250/CM2350 (2010-Present). It fits all heavy-duty truck applications using this engine platform. Q: Complete kit or need additional parts?A: Complete Stage 2 kit — all plates, plugs, gaskets, and hardware included. Q: Check engine light after install?A: On most applications, ECU tuning/delete programming is required. Consult your tuning provider for compatible software. Q: Stage 1 vs Stage 2 difference?A: Stage 2 includes complete blocking of all EGR passages including exhaust manifold ports, supply tube, and intake inlet — more thorough than cooler-only Stage 1. Q: Billet vs factory cast parts?A: Billet 6061-T6 is significantly stronger and more fatigue-resistant than factory cast iron. No cracking or warping under extreme heat cycles. Why Choose iFJF? US-Based Support: 7 days a week technical assistance 90-Day Returns: Full refund if not satisfied Fast Shipping: Orders ship within 1 business day
$38.99
iFJF iFJF 6PK1980 Serpentine Belt 6 Ribs 77.95" for Lacrosse Regal & More — EPDM Drive Belt
Product Overview The iFJF 6PK1980 6 Ribs Serpentine Belt is a precision-engineered EPDM drive belt measuring 77.95 inches (1980mm) in effective length. Designed as a direct-fit replacement for worn or cracked serpentine belts, this 6-rib belt delivers reliable power transmission to your vehicle's alternator, power steering pump, A/C compressor, and water pump. Constructed from high-grade EPDM (Ethylene Propylene Diene Monomer) rubber compound, this belt offers superior resistance to heat, ozone, and abrasion — critical for modern engines operating at elevated temperatures. The precision-molded ribs ensure optimal grip on pulleys, reducing slippage and extending service life. Key Features Premium EPDM Construction — Heat-resistant, crack-resistant, and built for long-term durability in demanding engine environments 6-Rib Precision Design — Molded ribs provide maximum surface contact with pulleys for quiet, efficient power transfer OE-Spec Performance — Meets or exceeds OEM specifications for fit, tension, and wear resistance Super-Silent Operation — Precision-engineered rib profile minimizes noise and vibration Broad Vehicle Compatibility — Fits dozens of popular makes and models (see compatibility table below) Easy Installation — Direct drop-in replacement; no modifications required Vehicle Compatibility This 6PK1980 6 Ribs serpentine belt is compatible with the following vehicles (partial list — verify your belt length before ordering): Make Model Years Lacrosse 2010 Regal 2011-2012 CTS 2003-2004, 2003-2004 Be-nz190E 1991-1992 ⚠️ Always measure your existing belt or check your owner's manual for the correct belt length (77.95 inches / 1980mm) before purchasing. Technical Specifications Part Number 6PK1980 Rib Count 6 Ribs Effective Length 1980mm (77.95 inches) Material EPDM (Ethylene Propylene Diene Monomer) Cross-Section PK Profile (Automotive Multi-Rib) OE Cross-References 6PK1980, 5060190, K06190, 4060190 Why Choose iFJF Serpentine Belts? Quality You Can Trust — Every iFJF belt undergoes rigorous quality control testing for dimensional accuracy, tensile strength, and heat resistance. Direct-Fit Design — No modifications, no adapters, no hassle. Remove the old belt and install the new one using your vehicle's belt routing diagram. Quiet & Smooth — Precision rib geometry ensures whisper-quiet operation without the squealing or chirping of inferior belts. Long Service Life — EPDM construction resists cracking, glazing, and stretching better than traditional neoprene belts. Value Pricing — OE-quality performance at a fraction of dealership pricing. Installation Tips Check Your Belt Length First — Measure your old belt or verify the part number in your owner's manual. The correct size for this belt is 1980mm (77.95" effective length). Inspect Pulleys & Tensioner — Worn pulleys or a weak tensioner can cause premature belt wear. Replace any questionable components while you're in there. Follow the Belt Routing Diagram — Most vehicles have a belt routing sticker under the hood. If not, take a photo of the old belt before removal. Use the Proper Tool — A serpentine belt tool or long-handled ratchet makes tensioner release much easier. Double-Check Alignment — After installation, ensure the belt sits squarely on all pulleys before starting the engine. Frequently Asked Questions Q: Will this 6 Ribs belt fit my vehicle? A: This belt measures 1980mm (77.95 inches) effective length with a 6-rib PK profile. Check your owner's manual or measure your existing belt — if it's a 6-rib belt measuring 77.95 inches, it will fit. The belt is compatible with Lacrosse, Regal, CTS and many other makes as listed in our compatibility table above. Q: What's the difference between EPDM and neoprene belts? A: EPDM (Ethylene Propylene Diene Monomer) belts offer significantly better heat resistance, ozone resistance, and crack resistance compared to traditional neoprene belts. Modern engines run hotter, and EPDM belts are designed to handle these elevated temperatures without premature failure. EPDM belts also maintain tension better over time, reducing the need for re-tensioning. Q: How do I know when my serpentine belt needs replacement? A: Look for these warning signs: (1) visible cracks, fraying, or glazing on the ribbed side, (2) squealing or chirping noises from the engine bay, especially on cold starts, (3) loss of power steering assist or A/C performance, (4) battery warning light (alternator not charging properly), (5) the belt has exceeded 60,000-100,000 miles since last replacement. Q: Can I install this belt myself? A: Yes! Serpentine belt replacement is a DIY-friendly job for most vehicles. You'll need a serpentine belt tool or ratchet to release the tensioner, and about 30 minutes. Always reference your vehicle's belt routing diagram (usually located on a sticker under the hood). If you're unsure, professional installation is recommended. Q: Does this belt come with a warranty? A: Yes, all iFJF serpentine belts are backed by our satisfaction guarantee. If you experience any manufacturing defects, contact us for a replacement. Normal wear and tear is not covered. Q: How does this compare to OEM belts? A: Our iFJF 6PK1980 belt meets or exceeds OEM specifications for dimensional accuracy, material quality, and performance. You get dealership-quality performance at a significantly lower price point. The EPDM compound we use is the same material specified by most major automakers for their OEM serpentine belts. Explore Related Products 🛒 More Serpentine Belts Browse our full selection of 6 Ribs serpentine belts in various lengths at the iFJF Belt Collection. 🔧 Related Reads R12T Fuel Filter/Water Separator Installation Guide Chevy Express/GMC Savana Duramax Diesel Maintenance Guide 🛒 Related Products & Resources 📏 Other Belt Lengths You May Need 77.56" for Camaro Escape & More 78.54" for X3 X5 & More 76.97" for Century Camaro & More View All Serpentine Belts → 🔧 Maintenance Guides Diesel Fuel Filter Maintenance — When to Replace Your Fuel/Water Separator Duramax 6.6L Oil Change: Complete DIY Guide for Every Generation (2001–2024) How to Install a Universal Tachometer in Your Classic Car or Truck Leveling Kit vs Lift Kit: What Your Diesel Truck Really Needs 💡 Tip: Serpentine belts should be inspected every 60,000-100,000 miles. Replace if you see cracks, glazing, or hear squealing noises.
$25.99
iFJF iFJF 1987-1992 Camaro Firebird L98 305/305ci TPI EGR Block Off Delete Kit Generic
⚠️ FOR OFF-ROAD USE ONLY. This product is intended for off-road, racing, and competition vehicles not registered for highway use. Check your local, state, and federal regulations before purchase and installation. Not legal for sale or use on emission-controlled vehicles operated on public roads. EGR Block Off Delete Kit for L98 305 TPI Camaro & Firebird The iFJF ER-0123 EGR Block Off Delete Kit provides a simple, effective solution for 1987-1992 Chevrolet Camaro and Pontiac Firebird owners struggling with EGR system issues on their L98 305 Tuned Port Injection engines. The L98's TPI intake manifold is notorious for EGR passage carbon clogging, which leads to rough idle, hesitation, stalling, and poor overall drivability. This block off plate kit allows you to permanently eliminate the problematic EGR system, clean up the engine bay, and restore smooth engine operation. The L98 TPI EGR Problem The Tuned Port Injection system on the L98 305 was revolutionary for its time, but its long intake runners and complex EGR routing created a perfect environment for carbon buildup. Exhaust gases carrying carbon particles pass through internal EGR passages in the intake manifold base. Over 30+ years of operation, these passages become completely blocked with hardened carbon deposits. When the EGR passages clog, the EGR valve either fails to open properly (triggering insufficient flow codes) or sticks partially open (causing constant exhaust gas dilution and rough running). The ER-0123 block off kit eliminates the EGR valve and seals the intake manifold port, resolving all carbon-related EGR issues at the source. Vehicle Compatibility Make Model Years Engine Chevrolet Camaro (IROC-Z, Z28, RS) 1987-1992 L98 305 CID (5.0L) TPI Pontiac Firebird (Trans Am, Formula, GTA) 1987-1992 L98 305 CID (5.0L) TPI Technical Specifications Specification Detail Plate Material Heavy Gauge Steel Plate Finish Zinc Plated (Corrosion Resistant) Gasket Material High-Temperature Fiber Composite Hardware Grade 8.8 Steel Bolts Application L98 305 TPI Intake Manifold EGR Port SKU ER-0123 Frequently Asked Questions Q: Will this fit my 1987-1992 Camaro or Firebird with the L98 305 TPI engine?A: Yes, this EGR block off delete kit is specifically designed for the 1987-1992 Chevrolet Camaro and Pontiac Firebird equipped with the L98 305 CID (5.0L) Tuned Port Injection engine. It fits IROC-Z, Z28, Trans Am, Formula, GTA, and base models with this specific engine. Q: What does this kit include?A: The ER-0123 kit includes a precision-cut steel block off plate, high-temperature gasket, and all necessary mounting hardware for a complete installation. Q: Will this cause a check engine light?A: On pre-OBDII vehicles (1987-1992), removing the EGR system may trigger a Service Engine Soon light depending on your specific ECU calibration. Some owners report no light, while others may need a custom ECU tune or PROM chip to suppress the EGR diagnostic routine. Q: Why remove the EGR system on an L98?A: The EGR passages in the L98 TPI intake manifold are prone to severe carbon clogging after years of use. This causes rough idle, hesitation, and poor performance. Removing and blocking the EGR eliminates these issues and simplifies the engine bay. Q: How long does installation take?A: Installation typically takes 20-30 minutes. The EGR valve is easily accessible on the passenger side of the TPI intake manifold. Basic hand tools are all that's required - a socket set, wrench set, and possibly penetrating oil for stubborn bolts. Related Products Blog Resources EGR Delete Installation & Tuning Guide iFJF Performance News & New Releases FOR OFF-ROAD USE ONLY. Not legal for use on emission-controlled motor vehicles operated on public highways.
$30.49
iFJF Duramax Fuel Filter Primer Seal Rebuild Kit — Silver Bleeder Screw | iFJF
Product Overview The Duramax Fuel Filter Primer Seal Rebuild Kit — Silver Bleeder Screw | iFJF from iFJF Direct is engineered to meet or exceed OEM specifications for GMC vehicles (2001-2013) with LMM. This fuel filter rebuild kit delivers reliable performance at factory-direct pricing. Key Features Premium Quality: Manufactured to strict quality control standards with durable materials for long service life Direct Fit: Designed as a direct replacement — no modifications required for installation on compatible vehicles Factory Direct Value: Eliminate the middleman markup — get OEM-quality parts at aftermarket prices Fast US Shipping: Ships from our US warehouse within 1 business day of order Compatibility This product is designed to fit GMC vehicles (2001-2013) equipped with the LMM engine. Please verify compatibility with your specific vehicle using our fitment guide or contact our support team before ordering. Why Choose iFJF Direct? Quality Assurance: Every product undergoes multi-point inspection before shipping US-Based Support: Our customer service team is available to answer your fitment and installation questions Hassle-Free Returns: 90-day return policy on unused parts in original packaging Expert Community: Join thousands of DIY mechanics and professional technicians who trust iFJF Frequently Asked Questions Q: Does this silver kit include the same seals as the black version?A: Yes — both color variants include identical 4× Viton O-rings, 2× nitrile plunger U-cups, and one billet 6061-T6 aluminum bleeder screw. The only difference is the anodized color (silver vs black). Q: Will this kit fix hard starting on my 2006 Duramax LBZ?A: Yes. Hard starting after sitting overnight is a classic symptom of air intrusion through worn primer pump seals. This rebuild kit restores the fuel system's air-tight integrity. Q: How do I know if my primer pump seals are bad?A: Look for fuel seepage around the top of the filter housing, extended cranking before starting (especially after sitting overnight), and visible air bubbles in the clear fuel return line. Q: Can I install this without removing the fuel filter housing?A: Yes — the primer pump can be rebuilt with the housing still mounted on the engine. Removing the housing makes access easier but is not required. Q: Is the silver finish as durable as the black anodized?A: Absolutely. Both finishes use Type II anodizing for corrosion protection. The silver finish may show less wear on the wrench hex over time. 🔗 Related Products
$23.99
iFJF iFJF Hand-Mic Mount Base for FTM-300DR FTM-300 FTM-7250DR FTM-7250 for Wrangler Chevy FD Off-Road SUV (Blue)
Overview Keep your communications gear exactly where you need it with the iFJF Hand-Mic Mount Base in Blue. Designed for off-road enthusiasts who demand reliable radio communication this mount securely holds your Yaesu handheld microphone whether you are crawling rocks in Moab or navigating backcountry trails. The blue finish adds a custom touch to your Jeep Wrangler Chevy SUV or other off-road vehicle interior. Compatibility Category Compatible Models Radio Models Yaesu FTM-300DR FTM-300 FTM-7250DR FTM-7250 FTM-400DR FT-450D Vehicle Fitment Jeep Wrangler JK/JKU/JL/JLU/YJ/TJ Chevy Off-Road SUVs FD Off-Road SUVs Mounting Location Roll Bar Dashboard Center Console Key Features Wide Radio Compatibility: Specifically designed for Yaesu FTM-series mobile radios including FTM-300DR FTM-7250DR FTM-400DR and FT-450D Secure Off-Road Grip: Heavy-duty clamping mechanism prevents microphone movement during aggressive off-road driving and vibration Premium Blue Finish: Durable powder-coated finish provides corrosion resistance and adds a custom interior accent Versatile Mounting: Compatible with roll bar and dashboard mounting locations for optimal positioning Rugged Construction: Built from high-strength materials to withstand dust mud vibration and extreme temperatures Quick Microphone Access: Ergonomic design allows for fast one-hand microphone removal when you need to communicate Technical Specifications Specification Value Color Blue (Powder Coated) Compatible Radios Yaesu FTM-300DR/FTM-300/FTM-7250DR/FTM-7250/FTM-400DR/FT-450D Mounting Style Roll Bar / Dashboard Clamp Material High-Strength Alloy Steel with Powder Coat Package Includes 1x Hand-Mic Mount Base Installation Choose Location: Select a mounting point on your roll bar or dashboard within easy reach of the driver seat Position Mount: Place the mount base at the desired location and align Secure Mount: Attach using appropriate hardware for your specific mounting surface (hardware not included — varies by vehicle) Insert Microphone: Slide your Yaesu handheld microphone into the mount until it clicks Test Fit: Give the microphone a gentle tug to ensure it is securely held. Test during vehicle operation to verify vibration resistance Why Choose iFJF? Off-Road Tested: iFJF products are designed by off-roaders for off-roaders — we understand the punishment your gear takes on the trail Radio-Specific Design: Unlike universal mounts this base is engineered specifically for Yaesu FTM-series microphones for a perfect fit Multiple Color Options: Also available in Red Black Blue Silver and Yellow to match your interior theme Affordable Quality: Get professional-grade mounting hardware without the premium price tag FAQ Q: Does this include the microphone?A: No this is the mount base only. The Yaesu handheld microphone is sold separately. Q: Will it fit other radio brands like Kenwood or Icom?A: This mount is specifically designed for Yaesu handheld microphones with the standard FTM-series mounting pattern. Other brands may not fit correctly. Q: What hardware do I need for installation?A: The mount base accepts standard mounting hardware. Specific bolts/screws needed depend on your mounting location. Most roll bar mounts use hose clamps or U-bolts (not included). Q: Can I install this on my Jeep grab handle?A: While designed primarily for roll bars the mount can be adapted to other locations. Ensure the mounting surface can support the microphone weight during off-road vibration. Q: Is the finish fade-resistant?A: Yes the powder-coated finish is UV-resistant and designed to maintain its color even with prolonged sun exposure. Q: Can it be used for right or left-hand operation?A: The mount is ambidextrous — it can be positioned for either right or left-hand microphone access depending on mounting orientation.
$23.99
iFJF iFJF Hand-Mic Mount Base for FTM-300DR FTM-300 FTM-7250DR FTM-7250 for Wrangler Chevy FD Off-Road SUV (Red)
Overview Keep your communications gear exactly where you need it with the iFJF Hand-Mic Mount Base in Red. Designed for off-road enthusiasts who demand reliable radio communication this mount securely holds your Yaesu handheld microphone whether you are crawling rocks in Moab or navigating backcountry trails. The red finish adds a custom touch to your Jeep Wrangler Chevy SUV or other off-road vehicle interior. Compatibility Category Compatible Models Radio Models Yaesu FTM-300DR FTM-300 FTM-7250DR FTM-7250 FTM-400DR FT-450D Vehicle Fitment Jeep Wrangler JK/JKU/JL/JLU/YJ/TJ Chevy Off-Road SUVs FD Off-Road SUVs Mounting Location Roll Bar Dashboard Center Console Key Features Wide Radio Compatibility: Specifically designed for Yaesu FTM-series mobile radios including FTM-300DR FTM-7250DR FTM-400DR and FT-450D Secure Off-Road Grip: Heavy-duty clamping mechanism prevents microphone movement during aggressive off-road driving and vibration Premium Red Finish: Durable powder-coated finish provides corrosion resistance and adds a custom interior accent Versatile Mounting: Compatible with roll bar and dashboard mounting locations for optimal positioning Rugged Construction: Built from high-strength materials to withstand dust mud vibration and extreme temperatures Quick Microphone Access: Ergonomic design allows for fast one-hand microphone removal when you need to communicate Technical Specifications Specification Value Color Red (Powder Coated) Compatible Radios Yaesu FTM-300DR/FTM-300/FTM-7250DR/FTM-7250/FTM-400DR/FT-450D Mounting Style Roll Bar / Dashboard Clamp Material High-Strength Alloy Steel with Powder Coat Package Includes 1x Hand-Mic Mount Base Installation Choose Location: Select a mounting point on your roll bar or dashboard within easy reach of the driver seat Position Mount: Place the mount base at the desired location and align Secure Mount: Attach using appropriate hardware for your specific mounting surface (hardware not included — varies by vehicle) Insert Microphone: Slide your Yaesu handheld microphone into the mount until it clicks Test Fit: Give the microphone a gentle tug to ensure it is securely held. Test during vehicle operation to verify vibration resistance Why Choose iFJF? Off-Road Tested: iFJF products are designed by off-roaders for off-roaders — we understand the punishment your gear takes on the trail Radio-Specific Design: Unlike universal mounts this base is engineered specifically for Yaesu FTM-series microphones for a perfect fit Multiple Color Options: Also available in Red Black Blue Silver and Yellow to match your interior theme Affordable Quality: Get professional-grade mounting hardware without the premium price tag FAQ Q: Does this include the microphone?A: No this is the mount base only. The Yaesu handheld microphone is sold separately. Q: Will it fit other radio brands like Kenwood or Icom?A: This mount is specifically designed for Yaesu handheld microphones with the standard FTM-series mounting pattern. Other brands may not fit correctly. Q: What hardware do I need for installation?A: The mount base accepts standard mounting hardware. Specific bolts/screws needed depend on your mounting location. Most roll bar mounts use hose clamps or U-bolts (not included). Q: Can I install this on my Jeep grab handle?A: While designed primarily for roll bars the mount can be adapted to other locations. Ensure the mounting surface can support the microphone weight during off-road vibration. Q: Is the finish fade-resistant?A: Yes the powder-coated finish is UV-resistant and designed to maintain its color even with prolonged sun exposure. Q: Can it be used for right or left-hand operation?A: The mount is ambidextrous — it can be positioned for either right or left-hand microphone access depending on mounting orientation.
$23.99
iFJF 5.3L 6.0L LS EGR+EVAP Valve Block Off Plates Kit Purge Solenoid
⚠️ OFF-ROAD USE ONLY: This product is intended for off-road and competition use only. Not legal for use on public highways in the United States. Please check your local, state, and federal regulations before purchasing. Product Overview The 5.3L 6.0L LS EGR+EVAP Valve Block Off Plates Kit Purge Solenoid Plug Intake/Exhaust LM7 Generic is a premium aftermarket replacement part engineered to meet or exceed OEM specifications. this component delivers reliable performance and durability. Manufactured with high-grade materials and precision engineering, it ensures a perfect fit and long service life. Key Features & Benefits Quality Construction: Premium-grade materials for maximum durability and corrosion resistance Quality Construction: Precision-engineered to OEM specifications for exact fitment Quality Construction: Rigorous quality control testing ensures reliable performance Quality Construction: Easy installation with basic hand tools — no modifications required Compatibility & Fitment Application Details Engine 5.3L Technical Specifications Specification Value Part Type ER-ads Material High-Grade Steel / Aluminum / Composite Finish Corrosion-Resistant Coating Installation Direct Bolt-On Replacement Warranty 1-Year Limited Warranty Why Choose iFJF? iFJF is a trusted name in aftermarket automotive and powersports parts. Every product undergoes strict quality control to ensure it meets rigorous performance standards. We stand behind our products with responsive customer support and a satisfaction guarantee. Our parts are trusted by professional mechanics and DIY enthusiasts alike for their reliability, fit, and value. Installation Tips Always disconnect the battery before beginning any installation Compare the new part with the old one to verify fitment before installation Use appropriate tools and follow manufacturer torque specifications Clean mounting surfaces thoroughly before installing the new component Test operation after installation to ensure proper function Package Includes 1x 5.3L 6.0L LS EGR+EVAP Valve Block Off Plates Kit Purge Solenoid Plug Intake/Exhaust LM7 Generic Mounting hardware (if applicable) Installation instructions Frequently Asked Questions Q: Will this fit my vehicle?A: Yes, this is a direct-fit replacement part. Please check the compatibility table above and verify your vehicle's part number or model year to confirm fitment. Q: Is professional installation required?A: No, this part is designed for DIY installation with basic hand tools. However, if you are not comfortable with mechanical work, we recommend having it installed by a certified technician. Q: How does this compare to OEM?A: This aftermarket replacement is manufactured to meet or exceed OEM specifications. It offers the same fit, function, and reliability as the original part at a significantly lower cost. Q: What materials are used?A: Our parts are manufactured using high-grade materials including carbon steel, aluminum alloys, and composite materials selected for durability, heat resistance, and corrosion protection. Q: What warranty is included?A: All iFJF products come with a 1-year limited warranty against manufacturing defects. If you experience any issues, contact our customer support team for a replacement or refund. Q: How fast is shipping?A: Orders are processed within 1-2 business days. Standard shipping takes 3-7 business days within the continental US. Expedited shipping options are available at checkout. Related Products & Resources You May Also Need View more ER-ads products Browse EGR Delete Kits DPF Delete Solutions Browse All Products Helpful Resources Performance Diesel Upgrades & Modifications Guide Installation Guides & How-To Articles
$25.79
iFJF iFJF 0-4412S Carburetor for 2300 500 CFM 2 Barrel Manual Choke Carburetor Compatible with GMC CJ5 CJ7 F100
Product Overview High-quality aftermarket 0-4412S Carburetor — precision-engineered for reliable fuel/air metering and direct bolt-on fitment. Manufactured to meet or exceed OEM specifications at a fraction of dealer pricing. Key Features Precision Manufacturing: CNC-machined components ensure exact tolerances and smooth throttle response OEM-Spec Materials: Constructed from durable die-cast aluminum and corrosion-resistant components that withstand high temperatures and fuel exposure Direct Fitment: Designed as a direct bolt-on replacement — no modifications or adapters required for installation Flow-Tested: Each unit undergoes quality control testing to verify proper fuel and air metering calibration Complete Assembly: Comes fully assembled and pre-adjusted for out-of-the-box installation — saves hours of setup time Compatibility Information This carburetor & fuel system is designed to replace the factory original equipment on compatible vehicles. Please verify your vehicle's year, make, model, and engine specifications before ordering. Contact our support team if you need assistance confirming fitment for your specific application. Technical Specifications Specification Details Product Type Carburetor & Fuel System Condition New Aftermarket Installation Direct Bolt-On Replacement Warranty 1-Year Replacement Warranty Shipping Same-Day on Orders Before 2 PM EST Why Choose iFJF Direct? At iFJF Direct, we specialize in high-quality aftermarket automotive parts for gasoline and diesel engines. Every product is sourced from trusted manufacturers and backed by our satisfaction guarantee. We stock inventory in our US warehouse and ship same-day on orders placed before 2 PM EST. Installation Tips Always disconnect the battery before starting any fuel system work Use new gaskets and seals — reusing old gaskets is the #1 cause of vacuum leaks and poor idle Double-check all linkage connections and throttle operation before starting the engine Perform a final fuel leak check after installation with the engine running at idle and under throttle Allow a short break-in period for gaskets to fully seat before final tuning adjustments Frequently Asked Questions Q: Will this fit my vehicle?A: Please verify your specific year, make, model, and engine against the compatibility information listed in the product title. If unsure, contact our support team with your VIN. Q: Is this a genuine OEM part?A: This is a high-quality aftermarket replacement manufactured to OEM specifications. It offers equivalent or superior performance at significantly lower cost than OEM dealer parts. Q: Does this come pre-tuned?A: Yes, the unit comes pre-adjusted from the factory for typical applications. Minor idle mixture and speed adjustments may be needed for your specific engine setup and altitude. Q: What's included in the box?A: The complete assembly as shown in product images, mounting gasket(s), and basic installation instructions. Verify included components match your application before installation. Q: What is your return policy?A: 90-day return policy for unused items in original packaging. Defective products covered under 1-year warranty. See our Returns page for full details.
$408.99
iFJF Duramax Fuel Filter Primer Seal Rebuild Kit w/ Billet Bleeder Screw | iFJF
Product Overview The Duramax Fuel Filter Primer Seal Rebuild Kit w/ Billet Bleeder Screw | iFJF from iFJF Direct is engineered to meet or exceed OEM specifications for GMC vehicles (2001-2013) with LMM. This fuel filter rebuild kit delivers reliable performance at factory-direct pricing. Key Features Premium Quality: Manufactured to strict quality control standards with durable materials for long service life Direct Fit: Designed as a direct replacement — no modifications required for installation on compatible vehicles Factory Direct Value: Eliminate the middleman markup — get OEM-quality parts at aftermarket prices Fast US Shipping: Ships from our US warehouse within 1 business day of order Compatibility This product is designed to fit GMC vehicles (2001-2013) equipped with the LMM engine. Please verify compatibility with your specific vehicle using our fitment guide or contact our support team before ordering. Why Choose iFJF Direct? Quality Assurance: Every product undergoes multi-point inspection before shipping US-Based Support: Our customer service team is available to answer your fitment and installation questions Hassle-Free Returns: 90-day return policy on unused parts in original packaging Expert Community: Join thousands of DIY mechanics and professional technicians who trust iFJF Frequently Asked Questions Q: Will this kit stop my Duramax from losing prime overnight?A: Yes — air intrusion through worn primer pump seals is the #1 cause of lost prime in Duramax engines. This rebuild kit replaces all critical seals to restore an air-tight fuel system. If your truck starts hard after sitting overnight, this is likely the fix you need. Q: Is the billet bleeder screw compatible with all Duramax fuel filter heads?A: Yes, this billet aluminum bleeder screw replaces the OEM plastic screw (GM part #97363195) on all 2001-2013 Duramax fuel filter housings, including LB7, LLY, LBZ, and LMM engines. Q: How long does installation take?A: Most DIY mechanics complete the rebuild in 30-45 minutes. The kit includes photo instructions for seal placement. Lubricating the seals with clean diesel fuel before installation makes the process smoother. Q: Are these seals compatible with biodiesel (B5-B20)?A: Yes. The Viton O-rings provide excellent resistance to biodiesel blends up to B20. The nitrile U-cups are also biodiesel-compatible for normal blend ratios. Q: What's different between this kit and buying just the seals?A: This kit includes the billet aluminum bleeder screw upgrade — a permanent fix for the commonly stripped OEM plastic bleeder. Buying the screw separately costs more than the bundle price. 🔗 Related Products
$23.99