Search results for "Chevy/GMC"

Complete EGR Delete Solution for 2013-2018 Dodge Ram 6.7L Cummins Turbo Diesel Upgrade your 2013-2018 Dodge Ram 2500 or 3500 with the 6.7L Cummins Turbo Diesel using this professional-grade EGR delete kit. Designed to eliminate the restrictive and failure-prone factory EGR (Exhaust Gas Recirculation) system, this kit restores engine efficiency, reduces carbon buildup, and unlocks the full performance potential of your Cummins powerplant. Why Delete Your 6.7L Cummins EGR System? The factory EGR system on the 6.7L Cummins recirculates hot exhaust gases back into the intake manifold. While intended to reduce NOx emissions, this system causes: Carbon Buildup: Soot and carbon deposits accumulate in the intake manifold, throttle valve, and EGR cooler, restricting airflow and reducing power over time. Coolant Contamination: The EGR cooler is prone to internal failure, allowing coolant to mix with exhaust gases and enter cylinders – a leading cause of head gasket failure on 6.7L Cummins engines. Reduced Fuel Economy: Recirculated exhaust gas displaces clean intake air, reducing combustion efficiency and increasing fuel consumption by 1-3 MPG. Throttle Valve Restriction: The factory throttle valve creates unnecessary intake restriction, limiting turbo spool and throttle response. Increased Maintenance Costs: EGR-related repairs on 6.7L Cummins engines are well-documented, with cooler replacements averaging $1,500-$2,500 at dealerships. What's Included in This Kit Component Material Function EGR Cooler Block-Off Plates CNC Billet 6061-T6 Aluminum Seals EGR cooler ports at intake and exhaust manifold Throttle Valve Delete CNC Billet 6061-T6 Aluminum Replaces restrictive factory throttle valve with straight-flow design Coolant Bypass Adapter CNC Billet 6061-T6 Aluminum Maintains proper coolant routing after EGR cooler removal Mounting Hardware Grade 10.9 Steel All gaskets, bolts, and O-rings for complete installation Vehicle Compatibility Year Make Model Engine 2013-2018 Dodge / Ram 2500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 3500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 4500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 5500 6.7L Cummins Turbo Diesel I6 Premium Build Quality CNC-Machined 6061-T6 Billet Aluminum: Precision-engineered for exact fitment. Unlike stamped steel competitors, our billet plates won't warp under extreme heat cycling. Corrosion-Resistant Finish: Anodized surface treatment protects against oxidation and road salt corrosion in harsh environments. OEM-Spec Gaskets: Multi-layer steel (MLS) gaskets provide a leak-free seal rated for turbo diesel boost pressures exceeding 40 PSI. Grade 10.9 Hardware: High-tensile bolts and studs designed to withstand the thermal expansion and vibration of the 6.7L Cummins platform. Installation Overview This EGR delete kit is designed for experienced DIY mechanics and professional shops. Estimated installation time: 3-5 hours with basic hand tools. No welding or permanent modifications required – the kit is fully bolt-on and reversible. We recommend referencing a Cummins 6.7L service manual and following all safety procedures when working on your vehicle's emissions system. Performance Benefits Increased Horsepower & Torque: Eliminates intake restriction, allowing the turbocharger to spool faster and the engine to breathe cleaner, denser air. Improved Fuel Economy: Owners report 1-3 MPG improvement after EGR delete on 6.7L Cummins applications. Lower EGTs: Reduced exhaust gas temperatures by eliminating hot EGR recirculation – critical for towing and heavy-load operation. Cleaner Engine Oil: No more soot contamination from EGR, extending oil life and protecting critical engine bearings. Eliminated Coolant Loss Risk: Removes the EGR cooler – a known failure point that can lead to catastrophic head gasket damage. Frequently Asked Questions Q: Will this kit fit my 2018 Ram 3500 with the 6.7L Cummins?A: Yes. This kit is designed for all 2013-2018 Ram 2500, 3500, 4500, and 5500 trucks equipped with the 6.7L Cummins Turbo Diesel engine. It fits both the 68RFE automatic and G56 manual transmission variants. Q: Do I need a tuner after installing this EGR delete kit?A: Yes. The factory ECM will detect EGR system changes and may trigger a check engine light. A compatible tuner or ECM calibration is recommended to disable EGR-related diagnostic trouble codes (DTCs) and optimize engine parameters for the delete configuration. Q: Is this a complete kit with everything I need?A: Yes. This kit includes all EGR cooler block-off plates, throttle valve delete, coolant bypass adapter (where applicable), gaskets, O-rings, and Grade 10.9 mounting hardware. No additional parts required. Q: How does this compare to cheaper stamped steel kits?A: Our CNC-machined 6061-T6 billet aluminum plates maintain perfect flatness under extreme heat cycling – a critical advantage over stamped steel plates that can warp and leak over time. The premium anodized finish also provides superior corrosion resistance. Q: What are the signs my 6.7L Cummins EGR cooler is failing?A: Common symptoms include unexplained coolant loss, white smoke from the exhaust (coolant burning in cylinders), rough idle, and rising engine temperatures. If you notice these signs, replacing the EGR system should be a priority. Q: Can I install this kit myself?A: This kit is designed for DIY installation by mechanically inclined owners. Basic hand tools, a torque wrench, and mechanical experience are required. Estimated installation time is 3-5 hours. Professional installation is recommended if you're not comfortable working on diesel engine intake and exhaust systems. Q: Is this kit reversible?A: Yes. The kit is a bolt-on design with no cutting, welding, or permanent modifications. The factory EGR system can be reinstalled if desired. Q: What torque specifications should I use?A: All fasteners should be torqued to OEM specifications. Refer to your vehicle's service manual for exact values. Generally, EGR flange bolts require 18-22 ft-lbs on the 6.7L Cummins platform. Related Products for Your 6.7L Cummins 6.7L EGR Valve Delete Kit (2007-2018)Valve-only variant for earlier models 6.7L EGR Plate Cooler & Throttle Valve DeleteComplete EGR & throttle delete 6.7L DPF Delete Exhaust (2013+)4" Cab & Chassis exhaust 6.7L High-Flow Intake Elbow3.5" intake manifold upgrade Related Blog Posts 6.7L Cummins Common Problems & Solutions – EGR, DPF, and Reliability Guide Diesel Emissions Delete: What Owners Need to Know How to Improve 6.7L Cummins Fuel Economy – 10 Proven Mods

Read more less

Product Overview Restore your 2007-2011 Mercedes-Benz S65 AMG's handling and ride quality with this premium Lower Control Arm & Ball Joint Assembly. Manufactured to meet or exceed OEM specifications, iFJF control arms deliver precise steering response, reduced road noise, and long-lasting durability. Each unit features pre-installed ball joints, corrosion-resistant coating, and exact dimensional fitment for hassle-free installation. Key Features Pre-Assembled Ball Joints: Factory-installed and lubricated for quick bolt-on replacement — no pressing required OEM-Spec Engineering: Precision-manufactured to exact factory dimensions for guaranteed fitment Heavy-Duty Construction: Forged steel/aluminum construction withstands demanding driving conditions Corrosion-Resistant Coating: E-coat finish protects against rust, salt, and road debris for extended service life Enhanced Bushing Design: High-durometer rubber bushings absorb vibration and minimize NVH Complete Pair: Includes both left and right side control arms for a balanced suspension rebuild Vehicle Compatibility Year Range Make Model Position 2007 Mercedes-Benz S65 AMG Front Lower 2011 Mercedes-Benz S65 AMG Front Lower Technical Specifications Part Number CA-0047 Position Front Lower / Rearward Quantity 2 Pieces (Left + Right) Ball Joint Pre-Assembled & Greased Material Forged Steel / Aluminum Finish E-Coat Anti-Corrosion Symptoms of Worn Control Arms Clunking or knocking noises from front suspension over bumps Uneven or premature tire wear patterns Steering wheel vibration or wandering at highway speeds Vehicle pulling to one side during braking Excessive body roll in corners Installation Guide Installation time: 2-4 hours per side. Professional alignment is required after installation. We recommend having a qualified mechanic perform this replacement. Always replace control arms in pairs for balanced handling. Frequently Asked Questions Q: Will this fit my 2007-2011 Mercedes-Benz S65 AMG?A: Yes. This control arm pair is designed specifically for the 2007-2011 Mercedes-Benz S65 AMG. Please verify your vehicle's exact year and sub-model before ordering. Q: Do these come with ball joints installed?A: Yes. Each control arm arrives with a pre-assembled, lubricated ball joint ready for direct bolt-on installation. Q: Do I need an alignment after installation?A: Yes. A professional wheel alignment is absolutely required after replacing control arms to ensure proper handling and tire wear. Q: Are these sold individually or as a pair?A: This listing includes both left and right side control arms as a matched pair. Q: How do these compare to OEM?A: These control arms meet or exceed OEM specifications in materials, fitment, and durability — at a fraction of dealer pricing. Q: What's the warranty?A: iFJF provides a 1-year / 12,000-mile warranty against manufacturing defects. Q: Do I need any special tools?A: Standard metric socket set and a ball joint separator tool are recommended. A torque wrench is essential for proper installation. Related Products Complete your suspension rebuild with these related parts: Mercedes-Benz Suspension Parts — Full range of suspension components Control Arms & Ball Joints — Complete control arm selection Tie Rods & Steering — Steering linkage components

Read more less

Product Overview The iFJF KF04050BK Body Mount Bushing Kit is a direct replacement for the factory cab mount bushings on 1999-2017 Ford F-250 and F-350 Super Duty trucks. Over time, factory rubber bushings compress, crack, and degrade — leading to excessive body roll, cab-to-frame misalignment, and harsh ride quality. This complete bushing kit restores proper body-to-frame isolation and dramatically improves ride comfort and handling. Key Features Heavy-Duty Urethane Construction: Engineered from high-durometer polyurethane that resists oil, road salt, diesel fuel, and extreme temperature cycling — far outlasting factory rubber. Complete Replacement Kit: Includes all necessary body mount bushings, sleeves, and washers for a full cab mounting system refresh (position count varies by cab configuration). Eliminates Body Roll & Wandering: Worn body mounts cause the cab to shift on the frame, creating loose steering feel. New bushings restore tight, precise handling. Direct Fit, No Modification: Designed to OEM KF04050BK specifications for plug-and-play installation on 1999-2017 Super Duty platforms. Corrosion-Resistant Hardware: Zinc-plated or stainless steel sleeves prevent rust bonding that makes future service near-impossible. Compatibility Table Year Make Model Drivetrain Notes 1999-2017 Ford F-250 Super Duty 2WD / 4WD All cab configurations 1999-2017 Ford F-350 Super Duty 2WD / 4WD All cab configurations Specifications Specification Value Part Number KF04050BK Material Polyurethane Position Complete Cab Mount Set SKU FJ-FORD15-CK Hardware Included Yes (sleeves, washers, bolts) Signs You Need New Body Mounts Clunking or knocking noise from under the cab when going over bumps Visible cracking, flattening, or crumbling of existing bushings Cab sits uneven or leans to one side Increased cabin vibration and road noise Difficulty aligning body panels after a collision repair Installation Notes Body mount replacement requires lifting the cab slightly off the frame — this is an advanced DIY job. Professional installation is recommended. Always replace body mounts in complete sets (never just one side) to maintain proper alignment. A two-post lift makes the job significantly easier. Torque all bolts to Ford factory specifications after installation, then re-torque after 500 miles of driving. Why Choose iFJF iFJF body mount bushings are manufactured to strict quality standards, using premium polyurethane compounds that outperform OE rubber in durability, chemical resistance, and load-bearing capacity. Every kit is inspected for dimensional accuracy before shipping. Backed by our satisfaction guarantee and US-based customer support. Frequently Asked Questions Q: Does this kit fit both regular cab and crew cab?A: Yes. The KF04050BK kit covers all cab configurations for 1999-2017 Ford F-250/F-350 Super Duty — regular cab, super cab, and crew cab. Verify your year range before ordering. Q: How does polyurethane compare to OEM rubber bushings?A: Polyurethane offers significantly better chemical resistance (oil, diesel, road salt), higher load capacity, and longer service life than factory rubber. The trade-off is slightly firmer ride — most Super Duty owners consider this an upgrade, not a drawback. Q: Can I replace just one or two body mounts?A: We strongly recommend replacing the complete set. Mixing old and new bushings creates uneven load distribution and can cause premature wear on both the new bushings and the cab mounting points. Q: Do I need special tools?A: Basic hand tools plus a floor jack or lift to raise the cab. An impact wrench speeds up bolt removal significantly. A body mount bushing press tool set makes R&R much easier — available at most auto parts stores for loan. Q: What torque should the body mount bolts be tightened to?A: Follow Ford factory torque specs for your specific model year — typically 55-70 ft-lbs for cab mount bolts. Always re-torque after the first 500 miles as the bushings settle. Q: Will these reduce road noise and vibration?A: Yes. Fresh bushings properly isolate the cab from frame vibrations, noticeably reducing road hum and harshness — especially on rough pavement and gravel roads. Related Products 🧰 Shop All iFJF Parts Browse our full catalog of premium replacement parts ⭐ Best Sellers Our most popular parts trusted by thousands of customers Helpful Resources 📖 iFJF Installation Guides & Tips ❓ Need Help? Contact Our Support Team

Read more less

High-Flow 3.5" Air Intake Elbow for 12-Valve Cummins The iFJF ER-0095 3.5" Air Intake Elbow Charge Pipe is a performance upgrade for 1994-1998 Dodge Ram 2500 and 3500 trucks equipped with the legendary 5.9L 12-Valve Cummins turbo diesel engine. The factory intake elbow between the turbocharger compressor outlet and the intercooler piping is a known restriction point on these engines, with a restrictive internal diameter and abrupt bends that limit airflow. Our upgraded 3.5" elbow features a larger internal diameter and smooth mandrel-bent design to maximize airflow from your turbocharger to the intercooler, resulting in improved turbo response, lower exhaust gas temperatures, and better overall engine efficiency. How Intake Flow Affects 12V Cummins Performance The 12-Valve Cummins is famous for its mechanical simplicity and massive tuning potential. However, the engine's ability to make power is directly limited by how efficiently it can move air through the entire intake tract. The factory turbocharger on these engines (typically a Holset HX35 or HX40) moves a significant volume of air, but the stock compressor outlet elbow creates a bottleneck that increases turbocharger drive pressure and raises EGTs. By replacing the restrictive factory elbow with a larger, smoother-flowing unit, you reduce the pressure ratio across the turbocharger, allowing it to operate more efficiently. This is particularly beneficial on engines that have been tuned with increased fueling, where EGT management becomes critical. Vehicle Compatibility Make Model Years Engine Dodge Ram 2500 1994-1998 5.9L 12V I6 Cummins Turbo Diesel Dodge Ram 3500 1994-1998 5.9L 12V I6 Cummins Turbo Diesel Technical Specifications Specification Detail Diameter 3.5" (89mm) Internal Construction Mandrel-Bent Tubing Material Heavy-Gauge Steel / Aluminum Fitment Type Generic / Universal Fit Installation Requires Silicone Couplers & Clamps (Sold Separately) Application Turbo Compressor Outlet to Intercooler Piping Engine Code 6BT 5.9L 12-Valve SKU ER-0095 Key Benefits Reduces turbocharger compressor outlet restriction Can lower exhaust gas temperatures (EGTs) by 50-100°F under load Improves turbo spool response and reduces turbo lag Smooth mandrel-bent internal bore maximizes airflow velocity Simple bolt-on upgrade - one of the most cost-effective 12V mods Works with factory and aftermarket turbochargers Ideal foundation for future performance upgrades Frequently Asked Questions Q: What Cummins engines does this intake elbow fit?A: This 3.5" air intake elbow is designed for 1994-1998 Dodge Ram 2500 and 3500 trucks with the 5.9L 12-Valve Cummins turbo diesel engine. It replaces the factory intake elbow between the turbocharger compressor outlet and the intercooler piping. Q: Will this improve performance on my 12V Cummins?A: Yes, the larger 3.5" diameter and smooth internal bore reduce intake restriction compared to the factory elbow. This can improve turbo spool response, lower EGTs, and provide a small horsepower increase, especially when combined with a free-flowing air filter and larger exhaust system. Q: Is this a direct bolt-on replacement?A: This is a generic-fit intake elbow. The 3.5" diameter is a common upgrade size. Installation typically requires silicone couplers and T-bolt clamps (sold separately). Some trimming of factory piping or use of adapter couplers may be needed for a complete installation. Q: What material is the elbow made from?A: The intake elbow is constructed from heavy-gauge mandrel-bent tubing with a smooth internal surface for maximum airflow. The exterior features a durable finish to resist under-hood heat and corrosion common in diesel engine bays. Q: What are the benefits of upgrading the intake elbow?A: Upgrading from the restrictive factory elbow reduces turbocharger compressor outlet restriction, which can lower EGTs by 50-100°F under heavy load, improve throttle response, and reduce turbo lag. It's one of the most cost-effective bolt-on upgrades for 12V Cummins performance. Related Products iFJF Dodge Ram Cummins 5.9L / 6.7L Diesel Oil Filter iFJF 1906 AVS2 650CFM 4-Barrel Performance Carburetor iFJF Camaro Firebird L98 305 TPI EGR Block Off Delete Kit Blog Resources 12V Cummins Performance & Tuning Guides iFJF Diesel Performance News & Updates

Read more less

Product Overview Stop the notorious 6.7L Cummins coolant bypass hose leak permanently with this Billet Aluminum Coolant Bypass Hose Barb Adapter from iFJF. The OEM plastic barb fitting on 2009-2019 Ram 2500/3500 Cummins engines is a well-known weak point — repeated heat cycling causes the plastic to become brittle, crack, and eventually leak coolant. This can leave you stranded with an overheating engine. Our CNC-machined billet 6061-T6 aluminum adapter is a direct bolt-on replacement that eliminates this failure point for good. This complete kit includes the billet aluminum barb adapter, new hose clamps, O-rings, and replacement hose sections for a comprehensive, leak-free installation. Why the OEM Plastic Barb Fails The factory coolant bypass hose barb is made of glass-reinforced nylon plastic. While adequate when new, years of exposure to coolant at 190-210°F operating temperatures — combined with the constant vibration of the Cummins diesel engine — causes the plastic to degrade. The result is a sudden coolant leak that can rapidly drain your cooling system, leading to engine overheating and potential head gasket damage. This is one of the most common failure points on 2009-2019 Ram Cummins trucks. Key Features Billet 6061-T6 Aluminum Construction — CNC-machined from solid aerospace-grade aluminum for permanent durability Direct OEM Replacement — Same dimensions and fittings as the factory part; no modifications required Eliminates Plastic Barb Failure — No more cracked, brittle, or leaking OEM plastic fittings Corrosion-Resistant Finish — Engineered to withstand coolant exposure and engine bay conditions Precision CNC Machining — Tight tolerances ensure a perfect, leak-free seal with OEM hoses Lifetime Durability — Aluminum barb will outlast multiple OEM plastic replacements Compatibility Year Make Model Engine 2009-2018 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2019 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Fitment 2009-2019 Ram 6.7L Cummins Installation Time 30-60 Minutes Installation Difficulty Intermediate (Basic Hand Tools) Frequently Asked Questions Q: Does this fix the common coolant leak on my 6.7L Cummins?A: Yes. The OEM coolant bypass hose uses a plastic barb fitting that becomes brittle over time and eventually cracks, causing a coolant leak. Our billet aluminum adapter permanently replaces this failure-prone plastic part. Q: Is installation difficult?A: Installation is straightforward for anyone with basic mechanical skills. It typically takes 30-60 minutes with common hand tools. You'll need to drain some coolant before removing the old fitting — always work on a cool engine. Q: Will this fit my 2009-2019 Ram 6.7L Cummins?A: Yes. This adapter fits all 2009 through 2019 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Q: What material is the adapter made from?A: CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish. Unlike the OEM plastic barb that degrades from heat cycling, our aluminum adapter will last the lifetime of your engine. Q: Do I need any special tools?A: Basic hand tools are all you need — socket set, pliers, flathead screwdriver, and a coolant catch pan. Some models may benefit from hose clamp pliers for tight spaces. Q: What's the difference between the adapter only and the complete kit?A: The adapter-only option includes just the billet aluminum barb fitting. The kit includes the adapter plus new hose clamps, O-rings, and replacement hose sections for a complete, leak-free installation. Why Choose iFJF? iFJF specializes in solving the common failure points on diesel trucks. Our coolant bypass adapter is engineered by diesel owners, for diesel owners — we understand what fails and how to fix it permanently. Every product is backed by our commitment to quality and responsive US-based customer support. You May Also Need Coolant Bypass Kit for 2003-2007 Ram 5.9L Cummins Coolant Bypass Hose Barb Adapter Kit — Complete Kit with Hoses

Read more less

Duramax Fuel Filter Head Rebuild Kit — Stop Leaks & Hard Starts The iFJF Duramax Fuel Filter Head Rebuild Kit fixes the most common fuel system issues on 2001-2013 GM Duramax 6.6L diesel trucks (LB7, LLY, LBZ, LMM) — fuel leaks, air intrusion, and a primer pump that won't hold pressure. This 6-piece Viton seal kit replaces every wearable seal and O-ring in your filter head, plus includes a CNC-machined billet aluminum bleeder screw to replace the notoriously failure-prone OEM plastic screw. Save $200+ compared to replacing the entire filter housing at the dealer. Over time, the rubber seals in the Duramax filter head harden, shrink, and crack from heat cycling and diesel exposure. When seals fail, air enters the fuel system — causing extended cranking on cold starts, rough idle, and stalling under load. The OEM plastic bleeder screw is another known weak point: the hex head rounds off and the threads strip after just a few filter changes. This kit solves both problems in one affordable package. What's Included 6 Viton O-Rings & Seals: Primer pump diaphragm seal, filter head base gasket, heater element O-ring, WIF sensor O-ring, bleeder screw O-ring, and fuel line fitting seal — all Viton for superior diesel and heat resistance CNC Billet Aluminum Bleeder Screw (Black): Replaces the OEM plastic bleeder screw (GM 97363195). Machined from solid 6061-T6 aluminum — will never strip, crack, or round off Installation Guide: Step-by-step instructions with torque specs for each seal Key Features Viton Material: Unlike generic rubber O-rings that degrade in diesel within months, Viton (FKM) seals resist diesel fuel, biodiesel, engine heat (rated to 400°F), and compression set — maintaining a leak-free seal for years Complete Kit: Every seal you need — no running to the parts store mid-job for that one O-ring you forgot Billet Bleeder Screw: Same 6061-T6 aluminum construction as our standalone billet bleeder screw — solves the stripped-thread problem permanently Dealer Alternative: GM dealers typically replace the entire filter housing ($300+) instead of rebuilding it. This $23.99 kit fixes the actual problem. Compatibility Year Make Model Engine 2001-2013 Chevrolet Silverado 2500HD / 3500HD 6.6L Duramax (LB7, LLY, LBZ, LMM) 2001-2013 GMC Sierra 2500HD / 3500HD 6.6L Duramax (LB7, LLY, LBZ, LMM) When to Rebuild Your Filter Head Primer pump never gets firm — stays soft even after 20+ pumps Hard starting after truck sits overnight (air in fuel system) Visible diesel residue around the filter head or bleeder screw "Water in Fuel" light flickers intermittently (sensor O-ring leak) Fuel drips from the bottom of the housing after filter change FAQ Q: Is this a difficult DIY job? A: Moderate difficulty — expect 1-2 hours. You'll need basic hand tools (10mm socket, pick set for old O-rings, torque wrench). The filter head stays on the engine — you're just replacing seals. Our step-by-step rebuild guide walks you through every step. Q: Will this fix my hard start problem? A: If your hard starts are caused by air intrusion through worn seals — very likely. After the truck sits, air replaces fuel in the filter head. When you crank, the injection pump has to push that air pocket through before fuel reaches the injectors. New seals prevent air from entering. If hard starts persist after rebuild, check the fuel pressure regulator and injection pump. Q: What's the difference between this and buying a whole new housing? A: A new fuel filter housing assembly ($97.99) replaces everything — housing, primer pump, and all seals. This rebuild kit ($23.99) replaces the seals and bleeder screw only — ideal if your housing body is physically intact but the seals are leaking. If your housing is cracked or the primer pump lever is broken, get the full housing. Q: Are these seals diesel-proof? A: Yes — Viton (FKM) is the gold standard for diesel fuel systems. Unlike standard nitrile (Buna-N) O-rings that swell and degrade in diesel, Viton maintains its shape and elasticity at temperatures up to 400°F. These are the same material used in OEM Cummins and Duramax fuel system seals. Q: Can I install the billet bleeder screw separately? A: Yes — if you only need the bleeder screw, get our standalone billet aluminum bleeder screw (available in red, black, and silver). Q: What torque should I use on the bleeder screw? A: Hand-tighten, then 1/8 turn with a wrench. The O-ring does the sealing — overtightening damages threads. The billet aluminum screw has much stronger threads than the OEM plastic — but the housing threads are still aluminum. Snug is enough. Q: When should I rebuild vs. replace my Duramax fuel filter head?A: Rebuild if: the housing body is physically intact with no cracks, and the problem is leaking seals, a soft primer pump, or a stripped bleeder screw — this $23.99 kit fixes all three. Replace the entire housing if: the housing body is cracked, the mounting tabs are broken, or the primer pump lever is physically damaged. See our complete billet housing assembly for a full replacement solution. 📖 Related Guides How-to Replace & Rebuild the Diesel Fuel Filter Head on a Duramax Engine Duramax Fuel Filter Housing: Complete Compatibility & Replacement Guide 🔧 Complete Your Fuel System Fuel Filter Housing — related Duramax fuel system component Billet Air Bleeder Screw — related Duramax fuel system component TP3018 Fuel Filter — related Duramax fuel system component

Read more less

Product Overview The iFJF Universal Car Storage Holder brings order to your vehicle's interior chaos. Its adjustable, expandable design securely grips cup holders of varying sizes while providing organized compartments for your phone, keys, sunglasses, and beverages. The non-slip silicone base ensures it stays put during spirited driving or off-road adventures. Key Features Universal adjustable cup holder arms accommodate 2.5" to 4" diameters Multi-compartment design for phone, drinks, keys, and small items Non-slip silicone base pad — stays put during aggressive driving Durable ABS plastic with UV-resistant finish Tool-free installation — drops into your existing cup holder in seconds Expandable design fits compact cars through full-size trucks Vehicle Compatibility Make Model Year Range Engine Universal Most Cars, SUVs, Trucks All Years All ⚠️ Always verify fitment with your vehicle's specifications before ordering. Contact our support team for compatibility questions. Technical Specifications Brand iFJF SKU FJ-HD04-CK Material ABS Plastic + Silicone Base Cup Size Range 2.5" - 4" Diameter Installation Drop-In, No Tools Warranty 12-Month Limited Installation Guide Designed for DIY installation with basic hand tools. Refer to vehicle service manual for torque specs. Professional installation recommended if unsure. Frequently Asked Questions Q: Is this a genuine OEM part? This is a premium iFJF aftermarket replacement manufactured to meet or exceed OEM specifications at significant cost savings. Q: What is your return policy? 30-day hassle-free returns. If the part doesn't fit, contact our support team for a prepaid return label. Q: How fast is shipping? Orders ship within 1-2 business days from our US warehouses. Standard delivery: 3-7 business days. Why Choose iFJF? Quality Assurance: Every product is tested to meet or exceed OEM specifications for fit, function, and durability. Fast USA Shipping: Orders ship from our domestic warehouses with full tracking — typically delivered within 3-7 business days. Expert Support: Our US-based team of automotive specialists is ready to assist with fitment, installation, and technical questions. Hassle-Free Returns: 30-day return window on all iFJF products — no questions asked. Direct-to-Consumer Value: Premium quality without the dealer markup — save 30-60% vs. OEM pricing. Package Includes 1x iFJF Universal Car Storage Holder Multi-Functional Beverage Rack Installation hardware (where applicable) Quick-start guide Related iFJF Products 🔗 iFJF Tesla Model 3 Center Console Mats 🔗 iFJF GMC Sierra Center Console Armrest Latch Helpful Resources 📖 Complete Guide to Diesel Aftermarket Maintenance 📖 How to Choose the Right Replacement Auto Parts 📖 Top 10 DIY Upgrades for Your Truck or SUV

Read more less

Overview The CA10261 Engine Air Filter is built for heavy-duty Ram trucks that work hard every day. Covering the legendary 6.7L Cummins Turbo Diesel from 2007 through 2020 and the 6.4L HEMI V8 gas engine, this filter is designed to protect your engine against dust, dirt, and debris in the toughest conditions — from construction sites to cross-country hauling. Key Features Heavy-Duty Filtration: Multi-layer media traps fine dust and particulate without restricting airflow Ram 2500-5500 Coverage: Fits all cab configurations across the 2500, 3500, 4500, and 5500 lineup Cummins & HEMI: One filter covers both the 6.7L I6 Cummins and 6.4L V8 HEMI platforms OEM Cross-Reference: Replaces 53034051AB, 46930, CA10261 Easy Access: Top-mounted airbox on Ram trucks — swap in 5 minutes without tools Compatibility Table Brand Model Engine Year Range Ram 2500 6.7L L6 Cummins Turbo Diesel 2007-2020 Ram 3500 6.7L L6 Cummins Turbo Diesel 2007-2020 Ram 4500 6.7L L6 Cummins Turbo Diesel 2007-2020 Ram 5500 6.7L L6 Cummins Turbo Diesel 2007-2020 Ram 2500 6.4L V8 HEMI Gas 2011-2020 Ram 3500 6.4L V8 HEMI Gas 2011-2020 Specifications Spec Value Part Number CA10261, 53034051AB, 46930 Filter Type Panel (Engine Air) Media Synthetic/Cellulose Blend Replacement Interval Every 15,000-30,000 miles (more frequent in dusty environments) Why iFJF? Tested to meet or exceed OEM filtration specs at a fraction of dealer cost Rigid frame construction prevents seal leaks under high-vibration conditions Fast US shipping — get back on the road sooner FAQ Q: Does this fit my 2018 Ram 2500 6.7L Cummins?A: Yes. This filter fits all 2007-2020 Ram 2500/3500/4500/5500 with the 6.7L Cummins diesel engine. Q: How often should I change the air filter on a diesel truck used for towing?A: When towing heavy loads regularly, inspect the filter every 10,000 miles. In dusty job site conditions, replace every 10,000-15,000 miles regardless. A clogged filter on a Cummins can cause turbo lag and increased EGTs. Q: Is this the same as the Mopar 53034051AB?A: Yes — it is a direct OEM-quality replacement for Mopar 53034051AB and WIX 46930. Same fit, same performance, better price.

Read more less

Product Overview Upgrade your 2003-2007 Ford 6.0L Powerstroke with the iFJF EGR Intake Elbow — a direct replacement for the restrictive and failure-prone OEM plastic intake pipe. Crafted from T6061 billet aluminum with mandrel-bent tubing, this intake elbow delivers improved airflow, reduced intake temperatures, and long-term durability that the factory plastic part simply cannot provide. Designed for Ford F250, F350, F450, F550 Super Duty and Excursion models. Key Features T6061 Billet Aluminum Construction — Machined from aerospace-grade aluminum for maximum strength and heat resistance. Eliminates the OEM plastic cracking and warping problem. Mandrel-Bent Smooth Flow Path — Unlike crush-bent factory tubing, our mandrel-bent design maintains a consistent internal diameter for unrestricted airflow. Improved Turbo Response — The larger, smoother internal passage reduces intake restriction, helping the turbo spool faster and lowering EGTs. Direct Bolt-On Replacement — Uses all factory mounting points and hardware. No cutting, welding, or fabrication needed. Average install time: 30-45 minutes. Corrosion & Heat Resistant — Premium surface finish withstands engine bay temperatures, road salt, and chemical exposure without oxidizing or corroding. Compatible With Stock & Deleted EGR — Works with both factory EGR systems and EGR delete configurations for maximum flexibility. Compatibility Year Make Model Engine 2003-2007 Ford F-250 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-350 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-450 Super Duty 6.0L Powerstroke V8 Diesel 2003-2007 Ford F-550 Super Duty 6.0L Powerstroke V8 Diesel 2003-2005 Ford Excursion 6.0L Powerstroke V8 Diesel Specifications Specification Detail Material T6061 Billet Aluminum Manufacturing CNC Machined + Mandrel Bent Fitment Years 2003-2007 Engine 6.0L Powerstroke V8 Diesel Vehicle Fitment F250 / F350 / F450 / F550 Super Duty, Excursion Installation Direct Bolt-On SKU ER-0080 Why Upgrade Your Intake Elbow? Ford's 6.0L Powerstroke is a legendary engine — but it has a few Achilles' heels, and the plastic intake elbow is one of them. Over thousands of heat cycles, the OEM plastic degrades, cracks, and eventually leaks. A boost leak at the intake elbow means lost power, higher EGTs, and potential turbo damage from overspeeding. The iFJF T6061 aluminum intake elbow eliminates this risk permanently while improving airflow at the same time. It's one of the most cost-effective reliability upgrades you can make to your 6.0L. Frequently Asked Questions Q: Will this fit my 2006 F-250 6.0L Powerstroke?A: Yes. This intake elbow is designed for all 2003-2007 Ford F-250, F-350, F-450, and F-550 Super Duty trucks with the 6.0L Powerstroke diesel, as well as 2003-2005 Excursions. Q: Do I need to delete my EGR to install this?A: No. This intake elbow replaces only the factory plastic intake pipe. It is compatible with both stock EGR-equipped trucks and trucks that have had EGR delete modifications. Q: What tools do I need?A: Basic hand tools — 8mm, 10mm, and 13mm sockets, a ratchet, extensions, and a flathead screwdriver. A torque wrench is recommended for proper bolt tightening (18 ft-lbs spec). Q: Is this product legal for street use?A: This product is intended for OFF-ROAD / COMPETITION USE ONLY. Modifying the emissions control system, including the EGR system, is not legal for on-road vehicles in the United States under EPA and CARB regulations. Please verify compliance with your local laws. Q: How does this compare to the OEM Ford part?A: The OEM part (Ford 4C3Z-6K786-AA) is made of plastic that becomes brittle with heat exposure. Our aluminum version is stronger, more durable, and features a smoother internal flow path that reduces intake restriction. It's a one-time upgrade that you won't need to replace again. Q: What's the performance benefit?A: The primary benefit is reliability — eliminating the plastic failure point. Performance gains include slightly improved throttle response and 10-30°F lower EGTs due to reduced intake restriction.

Read more less

Rear Trunk Inner Sill Protector Trim Cover for Tesla Model 3 2017-2021 Protect your Tesla Model 3's rear trunk area from scratches, scuffs, and daily wear with the iFJF Rear Trunk Inner Sill Protector. Precision-engineered from premium stainless steel, this trim cover provides a perfect fit for 2017-2021 Tesla Model 3 vehicles while adding a sleek, modern accent to your cargo area. Whether you're loading groceries, luggage, sports gear, or work equipment, the trunk sill takes the most abuse. This durable guard absorbs impact and prevents unsightly paint damage that can diminish your Tesla's value over time. Vehicle Compatibility Make Model Year Range Body Style Tesla Model 3 2017-2021 All variants Key Features Premium Stainless Steel: Brushed finish resists corrosion, fading, and peeling — maintains a showroom look for years Precision Fit: Laser-measured and CNC-cut to match the exact contours of your Tesla Model 3's trunk sill Scratch & Scuff Protection: Creates a durable barrier between your cargo and the painted trunk sill surface Easy Installation: Pre-applied automotive-grade 3M adhesive backing — simply clean, peel, and press into place in under 10 minutes Enhanced Appearance: Adds a premium, custom look that complements your Tesla's minimalist interior design OEM+ Style: Designed to look like a factory option rather than an aftermarket add-on Technical Specifications Specification Detail SKU FJ-TSL-3-HBNB-SI Material 304 Stainless Steel, Brushed Finish Thickness 0.8mm Adhesive 3M Automotive-Grade Double-Sided Tape (Pre-Applied) Installation Peel-and-Stick, No Drilling Required Installation Instructions Clean: Thoroughly clean the trunk sill area with isopropyl alcohol (included prep pad) to remove all wax, oil, and debris Dry Fit: Position the guard on the sill without removing the adhesive backing to verify alignment Heat (Optional): For best results in cold weather, warm the adhesive and the sill surface with a hair dryer for 30-60 seconds Peel: Remove the adhesive backing gradually, starting from one end Press: Starting from the center and working outward, apply firm, even pressure for 60 seconds across the entire surface Wait: Allow 24 hours for maximum adhesive bonding before exposing to water or car washes Why Protect Your Tesla's Trunk Sill? The trunk sill is one of the most vulnerable areas on any vehicle, and Tesla's painted sill surfaces are particularly susceptible to scratches. Every time you load or unload cargo — groceries, luggage, sports equipment, tools, or pet carriers — items drag across the painted sill. Over time, these micro-scratches accumulate, leaving your trunk opening looking worn and neglected. A stainless steel sill guard not only prevents this damage but also makes cleaning easier: simply wipe down the smooth metal surface instead of scrubbing scratched paint. Frequently Asked Questions Q: Will this fit my 2017-2021 Tesla Model 3?A: Yes. This sill protector is precision-designed for the 2017-2021 Tesla Model 3 rear trunk opening. It follows the exact contour of your vehicle's trunk sill. Q: Does the adhesive damage the paint if I remove it later?A: No. The 3M automotive adhesive is designed to be removable without damaging factory paint when removed properly. Use a heat gun or hair dryer to warm the adhesive, then peel slowly. Any residue can be cleaned with adhesive remover. Q: Will the stainless steel rust or discolor over time?A: No. This guard is made from 304-grade stainless steel with a brushed finish, which is highly resistant to rust, corrosion, and discoloration — even in harsh weather conditions. Q: Can I install this in cold weather?A: For optimal adhesion, the surface temperature should be at least 60°F (15°C). In colder conditions, use a hair dryer to warm both the adhesive backing and the trunk sill surface before installation. Q: Does this interfere with the automatic trunk closing?A: No. The guard is thin (0.8mm) and follows the contour of the sill perfectly. It will not interfere with your Model 3's power liftgate operation or trunk seal.

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview Eliminate the restrictive and failure-prone EGR system on your 2010-2014 Ram 2500/3500 6.7L Cummins with this EGR Throttle Valve & Cooler Delete Kit from iFJF. The factory EGR system recirculates hot, soot-laden exhaust gas back into your engine's intake — causing carbon buildup, oil contamination, reduced performance, and elevated EGTs. This complete hardware kit replaces the EGR components with precision-machined billet aluminum delete plates and pipes, restoring clean airflow and reliability to your Cummins engine. Why Delete the EGR on Your 6.7L Cummins? The 6.7L Cummins is one of the most durable diesel platforms ever built — but the emissions systems hold it back. The EGR cooler is a known failure point that can leak coolant into the intake, and the EGR valve introduces abrasive soot particles into the combustion chamber. For off-road and competition applications, removing these components dramatically improves engine health and performance. Key Features Complete EGR System Delete — Throttle valve delete plate + EGR cooler delete components in one kit CNC-Machined Billet 6061-T6 Aluminum — Precision-engineered for perfect fit and long-term durability Eliminates Carbon Buildup — No more exhaust soot fouling your intake manifold, valves, and engine oil Reduced EGTs — Cooler exhaust gas temperatures for safer, more reliable operation under load Improved Turbo Response — Clean, unrestricted intake airflow for faster turbo spool Prevents EGR Cooler Failure — Eliminate the risk of internal coolant leaks causing hydrolock or head gasket damage Includes All Hardware — Gaskets, O-rings, bolts, and mounting hardware included Compatibility Year Make Model Engine 2010 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2011 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2012 Ram (Dodge) 2500 / 3500 6.7L Cummins Turbo Diesel 2013 Ram 2500 / 3500 6.7L Cummins Turbo Diesel 2014 Ram 2500 / 3500 6.7L Cummins Turbo Diesel Technical Specifications Specification Detail Material CNC-Machined Billet 6061-T6 Aluminum Finish Corrosion-Resistant Coating Application Off-Road / Competition Use Only Installation Professional Installation Recommended Tuning Required Yes — Custom ECU Tune Required to Disable EGR DTCs ⚠️ Important Legal Notice OFF-ROAD / COMPETITION USE ONLY. This EGR delete kit is intended exclusively for off-road and closed-course competition vehicles. It is NOT street-legal and does NOT comply with EPA or CARB emissions regulations. The purchaser assumes all responsibility for compliance with applicable laws. Frequently Asked Questions Q: What does this EGR delete kit include?A: This kit includes the EGR throttle valve delete plate, EGR cooler delete components, all necessary gaskets, O-rings, bolts, and mounting hardware for a complete installation. Q: Will this trigger a check engine light?A: Yes. The ECU will detect the missing EGR components and set diagnostic trouble codes. Custom ECU tuning is required to disable EGR-related DTCs and prevent limp mode. This kit is hardware only. Q: Is this legal for street use?A: OFF-ROAD / COMPETITION USE ONLY. EGR delete modifications are not EPA or CARB compliant and are not legal for on-road vehicles. Q: What are the benefits of EGR delete on a 6.7L Cummins?A: On off-road/competition vehicles, deleting the EGR system eliminates carbon buildup in the intake manifold, reduces soot contamination in engine oil, lowers EGTs, improves turbo response, and removes the risk of EGR cooler failure. Q: Do I need to remove the DPF as well?A: The EGR and DPF systems work together. For optimal results on competition vehicles, removing both systems with proper ECU tuning is recommended. However, this kit addresses the EGR system specifically. Q: What material is used?A: All delete components are CNC-machined from billet 6061-T6 aluminum with a corrosion-resistant finish, engineered to withstand the high-temperature environment of the 6.7L Cummins engine bay. Q: Does this fit my 2010-2014 Ram 2500/3500?A: Yes. This kit is designed for all 2010, 2011, 2012, 2013, and 2014 Ram 2500 and 3500 trucks equipped with the 6.7L Cummins turbo diesel engine. Why Choose iFJF? iFJF is your trusted source for diesel performance aftermarket parts. All our products are precision-engineered using premium materials and backed by responsive US-based customer support. From Cummins to Powerstroke to Duramax, we deliver the parts that keep your diesel running at its best. You May Also Need EGR Throttle Valve & Cooler Delete Kit — 2010-2014 Ram 6.7L EGR Valve Delete Kit for 2007-2018 Ram 6.7L Cummins 3.5" High Flow Intake Manifold Elbow for 2007-2018 Ram 6.7L ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less