Search results for "trailer axle parts"
iFJF Front Upper & Lower Control Arm Set for 2001-2011 Mercedes C-Class SLK CLK
Product Overview Upgrade your vehicle's front-end performance with this premium suspension kit. Engineered as a direct-fit replacement, this kit restores factory ride quality, steering precision, and handling. Whether you're refreshing a high-mileage daily driver or rebuilding after wear, these control arms and components deliver OE-grade performance at a fraction of dealership pricing. Each component is manufactured to strict quality standards with precision-machined ball joints, high-durometer rubber bushings, and corrosion-resistant coatings. The result is a suspension system that handles just like factory — smooth, quiet, and predictable through every corner and over every bump. Key Features OE-Spec Fitment: Designed to match factory geometry and mounting points — no modifications, drilling, or fabrication required. Simple bolt-on installation. Precision Ball Joints: Hardened steel ball studs with polished bearing surfaces and grease-retaining boots for long service life and smooth articulation. High-Durometer Rubber Bushings: Engineered to absorb road vibration while maintaining precise suspension geometry under load. Corrosion-Resistant Finish: E-coat or powder-coated surfaces protect against rust, road salt, and environmental wear for years of reliable service. Complete Kit: All necessary components included — control arms, ball joints, bushings, and hardware where applicable. No need to piece together individual parts. Pre-Assembled: Ball joints and bushings are pre-installed and pre-greased for faster installation and immediate road readiness. Fitment & Compatibility Year Range Make Model Notes 2001-2007 Mercedes-Benz C230/C280/C350 (W203) Sedan & Coupe 2003-2009 Mercedes-Benz CLK320/CLK350 (W209) Coupe 2003-2009 Mercedes-Benz E350 (W211) Sedan 2005-2011 Mercedes-Benz SLK300 (R171) Roadster Always verify fitment with your VIN before ordering. Contact our support team for compatibility confirmation. Technical Specifications Specification Detail Part Type Control Arm & Suspension Kit Material Forged Steel / Stamped Steel (varies by position) Ball Joint Type Pre-installed, sealed, pre-greased Bushing Material High-durometer SBR rubber Finish E-Coat / Powder Coat (black) Installation Bolt-on, direct replacement Warranty 1-Year Limited Warranty Why Choose iFJF Control Arms? Dealership replacement parts can cost 3-5x more for the same performance. Our suspension components are sourced from ISO/TS 16949 certified manufacturers — the same supply chain that produces OE parts for major automakers. You get factory-quality parts without the factory price tag. Every control arm kit undergoes dimensional verification and ball joint articulation testing before packaging. We stand behind every product with a 1-year warranty and lifetime technical support. If it doesn't fit or perform, we'll make it right. Frequently Asked Questions Q: Will these control arms fit my vehicle?A: Check the compatibility table above. These parts are designed for the specific years, makes, and models listed. If your vehicle falls outside these ranges, please contact us with your VIN for verification before ordering. Q: Do I need an alignment after installing control arms?A: Yes — absolutely. Replacing control arms changes suspension geometry and toe settings. A professional wheel alignment is required immediately after installation to prevent uneven tire wear and ensure proper handling. Budget approximately $80-120 for this service. Q: Can I install these myself or do I need a mechanic?A: Experienced DIYers with proper tools can install control arms in 2-4 hours per side. You'll need a floor jack, jack stands, torque wrench, ball joint separator, and basic hand tools. If you're not comfortable with suspension work, we recommend professional installation (typically 2-3 hours labor per side). Q: How do I know if my control arms need replacement?A: Common signs include: clunking noises over bumps, steering wheel vibration, uneven tire wear, wandering steering, and visible bushing cracks. If your vehicle has over 80,000 miles on original suspension components, preventive replacement is recommended. Q: Are ball joints pre-installed and greased?A: Yes. All control arms come with ball joints pre-installed and pre-greased from the factory. They are ready to bolt on and drive — no additional assembly required. Q: What's the difference between this kit and individual OEM parts?A: Our complete kit includes all the components you'd typically buy separately at the dealership — control arms, ball joints, and bushings — in one package at a significantly lower total cost. Individual OEM parts can easily exceed $500+ per side; our kit provides comparable quality for 40-60% less. Q: How long do aftermarket control arms typically last?A: With proper installation and alignment, expect 60,000-100,000+ miles of service life. Lifespan depends on driving conditions — rough roads, potholes, and off-road use accelerate wear. Regular inspection every 30,000 miles is recommended. Q: Do you offer warranty on control arm kits?A: Yes — all iFJF control arm kits include a 1-year limited warranty against manufacturing defects. If you experience any quality issues, contact our support team for a replacement or refund. Related Products Explore more from our collections: Control Arms & Suspension — complete front-end parts Auto Parts & Accessories — thousands of quality replacement parts Contact Us — have a fitment question? We're here to help Ready to Restore Your Suspension? Don't let worn control arms compromise your safety and driving experience. Order today and enjoy smooth, confident handling again. Fast Shipping • 1-Year Warranty • Lifetime Support
$129.79
iFJF Carburetor Carb For Honda TRX300EX Sportrax 300 2x4 TRX 300 EX...
Compatible For : Honda Sportrax 300 TRX300EX 2X4 1993-2008 Replaces Part Number:16100-HM3-L0116100-HM3-L0016100-HM3-A6116100-HM3-67016100-HM3-671 Package Included: 1 Carburetor as pictures shown Condition:100% new carburetor.tested before shipment.No adjustment needed. Direct fit. Please make sure our product fits your model and compare pictures with your original carb before placing an order and don't hesitate to contact us if you have any issue. Related Products Carburetor for Honda TRX300EX Sportrax Carburetor for Suzuki DRZ125 Carburetor for Briggs & Stratton 125cc Related Blog Posts Why Your Small Engine Won't Start — Carburetor Cleaning & Replacement Guide Frequently Asked Questions Q: Is this carburetor pre-adjusted?A: Yes. Each carburetor is factory pre-tuned with baseline air/fuel mixture and idle settings. Minor adjustments may be needed based on your altitude and engine condition. Q: Will this fit my vehicle?A: Please check the compatibility table in the product description. If you're unsure, contact us with your vehicle's year, make, model, and engine size. Q: Does it come with gaskets?A: Yes. The carburetor includes the necessary mounting gaskets and seals for installation. Q: Why did my old carburetor fail?A: The most common cause is ethanol-blended fuel sitting in the carburetor during storage. Ethanol attracts moisture and forms deposits that clog jets and passages. Using a fuel stabilizer during storage prevents this. Q: Do I need to re-jet the carburetor?A: Not for stock applications at sea level to moderate altitudes. If you have modified your engine (exhaust, intake, cam) or ride at high altitude (5,000+ feet), re-jetting may be needed.
$137.99
iFJF iFJF 2009-2010 Ford F250 F350 F450 F550 In-dash Upfitter Switch Wiring Harness Jumper Kit
Product Overview Simplify your Super Duty upfitter switch installation with this In-Dash Upfitter Switch Wiring Harness Jumper Kit from iFJF. The 2009-2010 Ford F-250/F-350/F-450/F-550 Super Duty trucks come with factory blunt-cut pass-through wires for upfitter switches — but connecting them can be a tedious wiring project. This plug-and-play jumper harness replaces Ford OEM AL3Z-13D730-AA and provides a clean, professional connection between your upfitter switches and the blunt-cut wires, with no cutting or splicing required. Key Features Plug-and-Play Installation — Direct connection to factory blunt-cut wires; no cutting, splicing, or soldering required OEM AL3Z-13D730-AA Replacement — Identical fit and function to the genuine Ford harness at a fraction of the cost Pre-Terminated Connectors — Clean, professional-grade terminations for reliable electrical connections Correct Wire Gauge — Meets or exceeds OEM wire specifications for each circuit's rated amperage Factory-Length Harness — Proper wire lengths for clean routing behind the dash without excess slack Complete Kit — Includes all connectors, terminals, and wire leads needed for installation Compatibility Year Make Model 2009 Ford F-250 / F-350 / F-450 / F-550 Super Duty 2010 Ford F-250 / F-350 / F-450 / F-550 Super Duty Technical Specifications Specification Detail OEM Part Number AL3Z-13D730-AA Switch Support 4-Switch Upfitter Panel Installation Type Plug-and-Play (No Splicing Required) Application In-Dash Wiring Harness Jumper Frequently Asked Questions Q: Does this kit include the switches themselves?A: No. This is the wiring harness jumper kit only — it connects the factory-installed blunt-cut wires under the dash to the upfitter switches. The switches themselves are sold separately or may already be present in your vehicle. Q: Is this plug-and-play?A: Yes. This jumper harness connects directly to the factory blunt-cut pass-through wires under the dash. No cutting, splicing, or soldering required — simply plug it in and route your accessories. Q: Does this replace AL3Z-13D730-AA?A: Yes. This kit is a direct replacement for Ford OEM part number AL3Z-13D730-AA, the factory upfitter switch wiring harness. Q: Will this work on my 2009-2010 Super Duty?A: Yes. This harness is designed for 2009 and 2010 Ford F-250, F-350, F-450, and F-550 Super Duty trucks with factory upfitter switch provisions. Q: How many switches does this support?A: This harness supports the standard 4-switch upfitter panel found in 2009-2010 Super Duty trucks. Each circuit is rated for the factory-specified amperage. Why Choose iFJF? iFJF delivers practical, high-quality solutions for Super Duty owners. Our wiring harness kit saves you time and frustration compared to manually wiring upfitter switches, with OEM-grade connectors and proper wire specifications for reliable, long-lasting performance. You May Also Need 6.4L Powerstroke Exhaust Up-Pipe for 2008-2010 Ford Super Duty
$125.59
iFJF Front Lower Forward Control Arms for Mercedes C300/E350 — W204/C207 RWD & 4Matic
Front Lower Forward Control Arm Pair for Mercedes-Benz C-Class & E-Class Coupe Direct replacement pair of front lower forward control arms for W204 (C-Class) and C207/A207 (E-Class Coupe/Cabriolet) platforms. Each arm includes a pre-installed sealed ball joint and OEM-spec rubber bushing — ready for bolt-on installation. Fits BOTH RWD and 4Matic (AWD) configurations on compatible models. Manufactured from forged steel with an E-coated corrosion-resistant finish. Vehicle Fitment Model Drivetrain Years Chassis C230 4Matic AWD 2008-2009 W204 C300 4Matic AWD 2008-2011 W204 C300 RWD 2012-2014 W204 C350 4Matic AWD 2012-2015 W204 E350 Coupe 4Matic AWD 2012-2014 C207 E400 Coupe 4Matic AWD 2015-2018 C207 Package Contents 1x Front Driver Side Forward Lower Control Arm with Pre-Installed Ball Joint 1x Front Passenger Side Forward Lower Control Arm with Pre-Installed Ball Joint Mounting Hardware Kit (Bolts, Nuts, Washers) Key Features Forged Steel Construction: Meets or exceeds Mercedes-Benz OEM strength and durability requirements Pre-Greased & Sealed Ball Joints: Maintenance-free design — no zerks to lubricate, permanently sealed against contaminants OEM-Spec Rubber Bushings: Matches factory durometer for ideal combination of ride comfort, NVH isolation, and steering response Dual Drivetrain Compatibility: Unlike most W204 control arms, this forward position arm fits both RWD and 4Matic configurations E-Coated Corrosion Protection: Resists rust, pitting, and winter salt damage for long service life Technical Specifications Spec Detail Position Front Lower Forward (Both Sides) Material Forged Steel, E-Coated Ball Joint Sealed, Pre-Greased, Non-Serviceable Bushing OEM-Spec Rubber Drivetrain RWD & 4Matic Compatible Warranty 2-Year / 24,000-Mile Symptoms of Worn Forward Control Arms Clunking Over Bumps: Metallic thumping noise from the front suspension when driving over uneven surfaces Steering Wander: Vehicle drifts or requires constant minor steering corrections at highway speeds Uneven Tire Wear: Inner edge tire wear — classic Mercedes control arm bushing failure symptom Vague Steering Feel: Steering response feels delayed or imprecise — especially during lane changes Visible Bushing Damage: Rubber bushings show cracking, tearing, or separation from the metal sleeve Frequently Asked Questions Q: Does this fit both RWD and 4Matic?A: Yes — this forward lower control arm is one of the few W204/C207 suspension components that is shared between RWD and 4Matic configurations. Verify your model year and engine match the fitment table above. Q: Are the ball joints replaceable separately?A: No. The ball joints are integral to the control arm and cannot be replaced individually. The entire arm must be replaced as a complete assembly — which is why we include them pre-installed. Q: How do I know if my forward control arms are bad?A: Common symptoms include clunking over bumps, steering wander at highway speeds, uneven inner-edge tire wear, and visible cracks or tears in the rubber bushing. A mechanic can confirm with a pry bar test for excessive bushing movement. Q: Do I need to replace both sides at once?A: Yes. Control arms should always be replaced in pairs (left + right). Replacing only one side creates uneven suspension response and can cause unpredictable handling and accelerated tire wear. Q: Will an alignment be required?A: Yes. Professional alignment is mandatory after any control arm replacement. The forward control arm directly affects caster and toe settings — skipping alignment will result in rapid tire wear. Q: How does this compare to genuine Mercedes-Benz parts?A: Our forged steel control arms meet or exceed OEM specifications for material strength, bushing durometer, and ball joint tolerances. They provide the same fit, function, and durability as dealer parts at a significantly lower cost — backed by our 2-year warranty. Related Products Mercedes C250/C300 W204 RWD Control Arm Kit (4-Piece) 10PCS BMW X5 E53 Control Arm Kit BMW 745i/745Li Control Arm Kit Related Products Mercedes S65 AMG 2pcs Suspension Lower Rearward Control Arms BMW 128i 323i 325i 328xi 10PCS Rear Control Arm Kit Chevy GMC V8 C/K Truck Exhaust Header 1988-1997 Related Guides & Articles Ball Joint Removal/Install on 2018 Ram 4500/5500 Diesel How to Install Tie Rods on Your GM Truck | Dmax XD Tie Rod Upgrade How to Replace the Serpentine Belt on a 5.9 & 6.7L Cummins
$123.96
iFJF 5184294AE Oil Filter Adapter Housing for 2011-2013 Chrysler Dodge Jeep 3.6L V6
Product Overview The 5184294AE oil filter adapter housing (also known as the oil cooler/filter housing assembly) is a critical engine component on the 3.6L Pentastar V6 engine used across Chrysler, Dodge, and Jeep vehicles from 2011-2013. The factory plastic housing is a well-known failure point — it develops hairline cracks from heat cycling, causing oil leaks that drip onto the exhaust manifold and create a burning oil smell. This complete assembly includes the housing with integrated oil pressure and temperature sensors, gaskets, and seals for a direct, leak-free replacement. Fix the Pentastar oil leak once — permanently. Key Features Complete Housing Assembly — Includes the oil filter adapter housing, integrated sensors (oil pressure and oil temperature), gaskets, and O-ring seals. No component reuse required. Engineered for the Pentastar 3.6L V6 — Designed specifically for the 2011-2013 3.6L Pentastar engine (engine code ERB). Direct replacement for OEM part 5184294AE. Replaces Multiple Part Numbers — Compatible replacement for 5184294AE, 5184294AD, and 5184294AC — covers all revisions of this housing across the 2011-2013 model years. Stops Burning Oil Smell — The #1 symptom of a cracked housing is oil leaking onto the hot exhaust manifold below, producing a noticeable burning oil odor — especially at idle or after parking. Wide Vehicle Coverage — Fits Chrysler 200, 300, Town & Country; Dodge Avenger, Challenger, Charger, Durango, Grand Caravan, Journey; Jeep Grand Cherokee, Wrangler; Ram C/V; and Volkswagen Routan. Compatibility / Fitment Make Model Engine Years Chrysler 200 3.6L V6 2011-2013 Chrysler 300 3.6L V6 2011-2013 Chrysler Town & Country 3.6L V6 2011-2013 Dodge Avenger 3.6L V6 2011-2013 Dodge Challenger 3.6L V6 2011-2013 Dodge Charger 3.6L V6 2011-2013 Dodge Durango 3.6L V6 2011-2013 Dodge Grand Caravan 3.6L V6 2011-2013 Dodge Journey 3.6L V6 2011-2013 Jeep Grand Cherokee 3.6L V6 2011-2013 Jeep Wrangler (JK) 3.6L V6 2012-2013 Ram C/V (Cargo Van) 3.6L V6 2012-2013 Volkswagen Routan 3.6L V6 2011-2013 Technical Specifications Specification Value Part Number 5184294AE (5184294AD, 5184294AC) Component Type Oil Filter Adapter Housing (Oil Cooler Assembly) Engine 3.6L Pentastar V6 (ERB) Includes Sensors Yes — Oil Pressure + Oil Temperature Includes Gaskets Yes — Complete Seal Kit Material Engineered Polymer / Aluminum (Design-Specific) Why Choose This The Pentastar 3.6L V6 is one of the most widely used engines in Chrysler/Dodge/Jeep vehicles — and its oil filter housing is one of its most common failure points. The OEM housing (especially 2011-2013 models) develops cracks at the gasket surface from heat cycling, allowing oil to leak onto the exhaust manifold. This not only produces a burning smell but can accelerate to a significant leak if ignored. Replacing the housing with this complete assembly — including fresh sensors and seals — is the definitive fix. The cost is a fraction of what dealers charge for the same job. Related Products John Deere Steering Gear Set GX21924BLE — Lawn tractor repair Browse all Engine Parts — Filters, housings, and engine components Shop All iFJF Parts — Complete inventory Frequently Asked Questions Q: Do I need to replace the sensors if mine still work?A: This housing assembly comes with new sensors pre-installed. While you can transfer old sensors, the internal O-rings that seal them are a secondary leak path. Using the new sensors with fresh seals ensures a leak-free result. The labor to redo leaking sensor O-rings is the same as the initial job. Q: How do I know if my oil filter housing is cracked?A: Key symptoms: burning oil smell from the engine bay (especially at idle or after shutting off), visible oil pooling in the valley of the engine under the intake manifold, oil dripping onto the exhaust manifold or catalytic converter, and low oil level between changes without visible ground drips. Q: What tools do I need for this replacement?A: Basic socket set, torque wrench, flathead screwdriver (for hose clamps), and a clean work area. The housing is located under the intake manifold — removal of the upper and lower intake manifolds is required. Budget 3-5 hours for DIY installation. Q: Is this the updated design or the original?A: This replacement is manufactured to the latest 5184294AE specification, which incorporates design improvements over the earlier 5184294AC and 5184294AD versions that were more prone to cracking. All mounting points and connections are identical to the original. Q: Do I need to replace the intake manifold gaskets?A: Yes — the intake manifolds must be removed to access the oil filter housing. Intake manifold gasket sets are sold separately and should always be replaced when the manifolds are removed. Reusing old gaskets risks vacuum leaks. Q: Can I drive with a leaking oil filter housing?A: Short distances at low speed may be acceptable, but it's not recommended. Oil leaking onto hot exhaust components is a fire hazard. Additionally, the leak can worsen suddenly, leading to rapid oil loss and potential engine damage. Repair as soon as possible. Q: Does this fit the 2014+ Pentastar engines?A: This specific housing is for 2011-2013 model years. 2014+ Pentastar engines use a revised housing design. Check your vehicle's exact year before ordering. Order with Confidence Fast shipping from our US warehouse. Dedicated customer support team ready to answer your questions. Click Add to Cart to get your order started today. Related Guides & Articles Check out these helpful resources from the iFJF blog: Diesel Fuel Filters — Diesel Fuel Filter Replacement: Complete Guide Fuel Filter Guide — Diesel Fuel Filter Maintenance — When to Replace Fuel Filter Housing — Top 5 Diesel Fuel Filter Housing Problems & Fixes
$110.99
iFJF iFJF Upper Bearing Carrier Puller Replacement for Johnson Evinrude Mercury with MT0013 Drive Shaft Collar Adapter
Product Overview Upgrade your iFJF Upper Bearing Carrier Puller Replacement for Johnson Ev with this premium Bearing Puller. Professional-grade bearing removal tool. Compatible with Johnson, Evinrude, and Mercury outboard motors. Constructed from high-grade Hardened Tool Steel with CNC-machined manufacturing, this part is designed to meet or exceed OEM specifications. Direct bolt-on installation. All necessary hardware included. Key Features CNC-machined Hardened Tool Steel Construction: Built to withstand extreme under-hood temperatures and conditions. Performance Engineering: Designed to improve flow characteristics for better overall performance. Direct Fit Installation: Engineered to match OEM mounting points for straightforward bolt-on installation. Complete Kit: Includes all necessary gaskets, bolts, and hardware for installation. Quality Assurance: Each unit undergoes quality inspection before shipment. Vehicle Compatibility Year Make Model Engine Notes Technical Specifications Specification Value Material Hardened Tool Steel Construction CNC-machined Installation Type Bolt-On / Direct Fit Warranty 1-Year Limited Warranty Why Choose iFJF Direct? At iFJF Direct, we specialize in high-quality aftermarket automotive parts. Every product we sell is selected for quality, fitment accuracy, and value. Our US-based support team is available to answer your questions before and after purchase. ✅ Rigorous quality inspection on every unit ✅ Accurate fitment data backed by real-world testing ✅ Fast shipping from US warehouses ✅ 30-day return policy for peace of mind Frequently Asked Questions Q: What outboard motors is this compatible with?A: This bearing carrier puller is compatible with Johnson, Evinrude, and Mercury outboard motors when used with the MT0013 drive shaft collar adapter. Professional technicians trust this tool for marine engine bearing service. Q: What is your return policy?A: We offer a 30-day return policy for unused products in original packaging. If you experience any fitment issues, our support team will help ensure you have the correct part for your application. Installation Tips Allow the engine to cool completely before beginning installation Use penetrating oil on existing bolts for easier removal Follow torque specifications for all fasteners Check for exhaust leaks after installation and re-torque after first heat cycle
$77.99
iFJF iFJF Power Tailgate Lock Replacement for Tundra Tacoma 2007-2019
Product Overview The Power Tailgate Lock Replacement for Tundra Tacoma 2007-2019 is a premium-quality replacement part engineered for durability and precise fitment. Whether you're a professional mechanic or a DIY enthusiast, this component delivers OEM-grade performance at an affordable price. Manufactured with high-grade materials to withstand demanding conditions, it ensures reliable operation and long service life. Designed as a direct-fit replacement, installation is straightforward with basic hand tools — no special modifications required. Each unit undergoes rigorous quality inspection before shipping to guarantee it meets or exceeds factory specifications. Key Features Premium Construction: Built with high-grade materials for maximum durability and corrosion resistance Direct Fit: Precision-engineered to match OEM specifications — no modifications needed Easy Installation: Designed for straightforward bolt-on replacement with standard tools Rigorously Tested: Each unit passes strict quality control checks before shipment Cost-Effective: OEM-quality performance without the dealership price tag Fast Shipping: Ships from our US warehouse with reliable delivery Compatibility Please verify fitment before ordering. This product is designed to be compatible with the following applications: Compatible Brands Tundra, Tacoma Model Years 20, 20 Replaces Part # 2007-2019 ⚠️ Important: Always cross-reference your vehicle's year, make, model, and existing part number before ordering. Contact our support team if you need assistance confirming compatibility. Product Specifications Part Number(s) 2007-2019 Brand iFJF Condition New SKU FJ-LOCK06 Price $52.99 Why Choose iFJF? At iFJF, we specialize in providing high-quality aftermarket parts and accessories for automotive, powersports, RV, and outdoor equipment. Our mission is simple: deliver reliable, affordable replacement parts that professionals and DIYers can count on. ✅ Rigorous quality testing on every batch ✅ Fast, reliable shipping from US warehouses ✅ Responsive customer support team ✅ Thousands of satisfied customers nationwide Installation Tips Safety First: Disconnect the battery (if applicable) and wear appropriate safety gear before starting. Prepare Tools: Gather all necessary tools before beginning — check product listing for any special tool requirements. Remove Old Part: Carefully remove the existing component, noting the orientation and connections. Compare Parts: Place old and new parts side-by-side to verify fitment before installation. Install New Part: Mount the new component in the same orientation, ensuring all connections are secure. Test: After installation, test operation thoroughly before returning to regular use. Note: If you're unsure about any step of the installation process, we recommend consulting a professional mechanic or technician. Frequently Asked Questions Q: Is this a genuine OEM part?A: This is a high-quality aftermarket replacement part manufactured to meet or exceed OEM specifications. It is NOT a genuine OEM part. Q: Will this fit my vehicle?A: Please verify compatibility using the specifications and compatibility table above. Match your vehicle's year, make, model, and existing part number before ordering. Q: What is included in the package?A: The package includes the Power Tailgate Lock Replacement for Tundra Tacoma 2007-2019 as shown in the product images. Please refer to the listing photos for exactly what's included. Q: How long does shipping take?A: We ship from our US warehouse. Standard shipping typically takes 3-7 business days within the continental US. Expedited options are available at checkout. Q: What is your return policy?A: We offer a 30-day return policy for unused items in original packaging. If you receive a defective product, contact us immediately for a replacement or refund. Q: Do you offer warranty?A: Yes, all iFJF products come with a satisfaction guarantee. If you experience any issues, reach out to our support team for assistance. Order With Confidence Join thousands of satisfied customers who trust iFJF for their parts and accessories needs. With our commitment to quality, fast shipping, and excellent customer service, you can shop with confidence. Click "Add to Cart" now to get your Power Tailgate Lock Replacement for Tundra Tacoma 2007-2019 delivered fast!
$87.99
iFJF 1/4" Fuel Filter Kit with 3/16" Fuel Line for ATV Lawn Mower Over 2.0L Engines
Heavy-Duty 1/4" Fuel Filter Kit for Larger Displacement Engines This premium fuel filter kit is purpose-built for ATVs, lawn tractors, and equipment with engines over 2.0L displacement. Featuring the high-flow 691035 magnetic filter with 3/16" fuel line and secure clamps, this kit delivers the filtration capacity larger engines demand. Key Features High-Flow Design for 2.0L+ Engines: Engineered for larger displacement ATVs, lawn tractors, and non-fuel-injected vehicles requiring higher fuel volume. Dual-Stage Magnetic Filtration: Paper element traps debris while the built-in magnet captures microscopic metal particles for comprehensive fuel cleaning. Complete Service Kit: Includes 1/4" 691035 fuel filter, 3/16" ID premium fuel line hose (395051R), and 791850 clamps. Ethanol-Resistant Materials: Fuel line and filter components are rated for modern ethanol-blended fuels, resisting degradation and swelling. Quick DIY Installation: Pre-cut fuel line and simple clamp connections — install in under 20 minutes with basic hand tools. Compatibility Equipment Type Engine Size Fuel Line Size Large ATVs / UTVs Over 2.0L 1/4" Garden Tractors / Zero-Turns Over 2.0L 1/4" Generators (large portable) Over 2.0L 1/4" Non-Fuel-Injected Vehicles Over 2.0L 1/4" Small Farm Equipment Over 2.0L 1/4" Specifications Specification Value Filter Type High-flow inline magnetic fuel filter Filter Fitting Size 1/4" (6.35mm) Fuel Line ID 3/16" (4.76mm) Replaces Part # Briggs & Stratton 691035 Fuel Line Part # 395051R (heavy-duty) Clamp Part # 791850 Application Gasoline engines over 2.0L Why Choose iFJF Direct? Our heavy-duty fuel filter kits are built for the demands of larger engines. We use premium ethanol-resistant materials and OEM-spec filtration media. Every kit is backed by our satisfaction guarantee — if it doesn't fit or perform, we'll make it right. Frequently Asked Questions Q: What size engines does this kit fit?A: This kit is designed for larger displacement engines over 2.0L in ATVs, lawn mowers, and non-fuel-injected vehicles. For smaller engines, see our standard kit (SKU FJ-CRRK15).Q: What's the difference between this and the standard kit?A: This heavy-duty kit includes a higher-flow 691035 filter optimized for engines over 2.0L, with premium fuel line hose rated for higher fuel volume. The standard kit is designed for engines under 2.0L.Q: What's included in the kit?A: One 1/4" 691035 magnetic fuel filter, 3/16" inner diameter 395051R fuel line hose, and 791850 clamps — everything needed for a complete fuel line service.Q: How does the magnetic filtration help?A: The built-in magnet traps microscopic metal particles from tank corrosion and fuel system wear that paper-only filters miss. This dual-stage approach provides superior engine protection.Q: How often should I replace the fuel filter?A: We recommend replacement every 100 hours of operation or annually. Equipment used in dusty environments or with older fuel storage should be serviced more frequently. Upgrade your fuel system today with professional-grade filtration. Free shipping on orders $50+. Related Blog Posts Small Engine Fuel System Maintenance Guide Related Products Complete your setup with these related items: 1/4" Fuel Filter Kit for Small Displacement Engines
$39.99
iFJF 25854G01 Golf Cart Inductive Throttle Sensor Compatible with 1994-Up E
Product Overview The iFJF 25854G01 Golf Cart Inductive Throttle Sensor Compatible with 1994-Up EZGO TXT DC is a high-quality aftermarket replacement part designed for 1994 EZGO models. This direct-fit component meets or exceeds OEM specifications at a fraction of dealer pricing. Backed by iFJF's commitment to quality and US-based customer support. Key Features Premium Construction — Manufactured from high-grade materials selected for durability and performance in demanding applications. Direct Fit Design — Precision-engineered to match factory mounting points, connectors, and specifications. No modifications, cutting, or fabrication required. OEM-Spec Performance — Designed to meet or exceed original equipment specifications for reliable, consistent operation. Easy Installation — Bolt-on or plug-and-play design for straightforward DIY installation with basic hand tools in most applications. Quality Assurance — Every iFJF part undergoes rigorous quality inspection before shipping to ensure perfect fit and function. Compatibility Designed for 1994 EZGO vehicles and equipment. Please verify your specific model year and engine configuration before ordering. Contact our support team if you need assistance confirming fitment for your application. Specifications Specification Details Brand iFJF Fitment 1994 EZGO Condition New Installation Direct Replacement Why Choose iFJF iFJF is a trusted supplier of aftermarket auto parts, diesel performance components, and powersports accessories. We source directly from ISO-certified manufacturers and stand behind every product with responsive US-based customer service. Save money vs. dealer pricing without compromising on quality or fit. Frequently Asked Questions Q: Will this fit my 1994 EZGO model?A: This part is designed for 1994 EZGO. Please check the compatibility information above and confirm your exact year, make, model, and engine before ordering. Contact us with your VIN for a fitment guarantee. Q: Is this an OEM part?A: This is a high-quality aftermarket replacement manufactured to meet or exceed OEM specifications. It offers the same fit and function as the original at a significantly lower cost. Q: What's included in the package?A: The package includes the 25854G01 Golf Cart Inductive Throttle Sensor Compa as shown in the product images. Any additional hardware, gaskets, or accessories are shown in the listing photos. Q: Is professional installation required?A: Installation difficulty varies by application. Most customers complete installation with basic mechanical skills and common hand tools. Professional installation is always recommended if you're unsure. Q: What is the warranty?A: iFJF products come with a warranty against manufacturing defects. Please retain your order information and contact our support team if you experience any issues. Q: How fast is shipping?A: Orders typically ship within 1-2 business days from our US warehouse. Free shipping is available on orders $50+. Expedited shipping options are available at checkout.
$47.99
iFJF iFJF Carburetor for Onan RV Generator 541-0765 141-0983 Gasoline Marquis HGJ Series
Product Overview Carburetor for Onan RV Generator 541-0765 141-0983 Gasoline Marquis HGJ Series — a high-performance aftermarket replacement engineered for precision fitment and lasting durability. Factory pre-set and flow-tested before shipment, this aftermarket carburetor delivers consistent fuel metering, reliable cold starts, and smooth idle. Die-cast aluminum construction with gasket kit included. Compatibility This product is compatible with the vehicles and engines listed in the product title above. Please verify your specific application before ordering. Contact our support team if you need assistance confirming fitment. Key Features Factory pre-set and flow-tested Die-cast aluminum with corrosion-resistant finish Includes gaskets and mounting hardware Direct bolt-on replacement Improved throttle response and smooth idle Specifications Specification Value Material Die-Cast Aluminum Type Gasoline Carburetor Includes Carburetor, Gaskets, Hardware Installation Guide Disconnect battery and allow engine to cool Remove factory component and clean mounting surfaces Install new gaskets and position the replacement part Torque fasteners to specification in an even pattern Reconnect all connections and check for proper operation Start engine and check for leaks or issues Re-torque after first heat cycle (if applicable) Professional installation recommended. Estimated time: 1-4 hours depending on application. Frequently Asked Questions Q: Is this a direct bolt-on replacement?A: Yes, designed as a direct replacement for the factory component using existing mounting points. No modifications required for standard applications.Q: What is included in the package?A: The kit includes everything needed for installation — the main component, gaskets, mounting hardware, and any required accessories as shown in the product images.Q: Is professional installation required?A: Professional installation is recommended for best results. Some applications may require basic to intermediate mechanical skills and standard hand tools.Q: What warranty is included?A: All iFJF products come with a 3-month hassle-free return and money-back guarantee. If you have any issues, contact our support team.Q: How do I verify fitment for my specific vehicle?A: Check the compatibility information in the product listing, compare your engine code and model year, and contact our support team if you need assistance.Q: Is this carburetor pre-adjusted?A: Yes, factory pre-set and flow-tested. Minor idle speed adjustment may be needed based on your specific application and altitude. Why Choose iFJF? Quality Assurance — Every product is inspected and tested before shipment Complete Kits — All necessary hardware included — no extra parts to buy Expert Support — Our team is available to help with fitment and installation questions 3-Month Warranty — Hassle-free returns and money-back guarantee on all iFJF products Related Products Chevy SBC V8 Exhaust Header (1967-1987) Oil/Air Separator Catch Can for F150 Ford 7.3L Powerstroke Fuel Filter FD-4595
$153.99
iFJF 24 853 43-S Carburetor for Kohler CH20 CH22 CH640 — with Gasket
24 853 43-S Carburetor — Direct Replacement for Kohler Command Engines Get your Kohler-powered equipment running like new with this factory-spec replacement carburetor for Kohler Command CH20, CH22, and CH640 engines. Pre-calibrated and ready to install, this carburetor replaces Kohler part numbers 24 853 43-S, 24 853 255-S, and 24 853 50-S. Includes mounting gasket. Key Features Direct OEM Replacement — Engineered to factory specifications for Kohler Command PRO engines Pre-Calibrated — Baseline adjustments set at the factory for quick, hassle-free installation Complete Assembly — Includes throttle/choke linkages, fuel solenoid, and all vacuum ports New Gasket Included — Comes with mounting gasket for a proper seal Wide Compatibility — Fits Kohler-powered Cub Cadet, John Deere, Toro, and other equipment Compatible Models & Part Numbers Kohler Engine Replaces OEM # CH20, CH22, CH640 24 853 43-S CV18S, CV20S, CV22S, CV725 24 853 255-S, 24 853 50-S Command PRO Series 24 053 50-S, 2485332-S, 2485335-S Aftermarket Cross-Ref KL-3135, KL-110, KL-3100 FAQ Q: Will this fit my Cub Cadet with a Kohler CH20?A: Yes. This carburetor is a direct replacement for all Kohler Command CH20, CH22, and CH640 engines commonly found in Cub Cadet, John Deere, and Toro equipment. Q: Is the fuel solenoid included?A: Yes, the anti-afterfire fuel shut-off solenoid is pre-installed on the carburetor. Q: Do I need to adjust anything after installation?A: The carburetor comes pre-calibrated. You may need minor idle speed adjustment (target 1500-1750 RPM no-load for most applications). Q: What causes a Kohler carburetor to fail?A: The most common issues are ethanol-blended fuel causing varnish buildup in jets and passages, and deteriorated gaskets. Use ethanol-free fuel or fuel stabilizer to extend carburetor life. Q: Rebuild or replace?A: For carburetors with significant internal corrosion or warped bodies, replacement is more reliable than rebuilding. For minor varnish buildup, a rebuild kit may suffice. Why Choose iFJF? Our replacement carburetors are manufactured to strict ISO 9001 quality standards. US-based warehouse and support. Related Products Shop All Carburetors → Fuel Filters & Parts →
$183.99
