Search results for "Honda"

Product Overview The iFJF Driver Side Interior Door Handle is a direct replacement for the factory handle on select Nissan models. Engineered from high-grade ABS plastic with reinforced stress points, this handle addresses the common failure point of OEM handles — the plastic pivot that fatigues and snaps over time. Get back to opening your door normally without reaching through the window. Key Features Reinforced Stress Points — Thicker material at the pivot pin and spring anchor compared to factory handles, addressing the most common breakage point. Exact Fit — Same mounting hole spacing and cable attachment design as OEM. No modifications required. Complete Assembly — Includes handle, return spring, and cable attachment point — everything you need to replace the broken unit. OEM Color Match — Black textured finish matches factory interior trim of Altima, Pathfinder, and other compatible models. DIY-Friendly — Standard hand tools only. No special Nissan-specific tools needed. Compatibility Vehicle Position Years Nissan Altima Front Driver (LH) 2013-2018 Nissan Pathfinder Front Driver (LH) 2013-2020 Nissan Murano Front Driver (LH) 2015-2021 Nissan Maxima Front Driver (LH) 2016-2021 Specifications Spec Value Brand iFJF Position Front Driver Side (Left) Material Reinforced ABS Plastic Color Black (Textured) Condition New Why Choose iFJF Nissan interior door handles are a known weak point — the OEM plastic pivot fatigues and breaks, often leaving you unable to open the door from inside. Our replacement addresses this with a reinforced design that lasts longer than the factory part. No more climbing through the passenger side or rolling down your window to open the door from outside. Installation Instructions Remove the interior door panel — pry off trim pieces, remove screws (typically behind the grab handle cover and armrest), and pop the panel clips starting from the bottom. Disconnect the latch cable — locate the cable running from the door handle to the latch mechanism. Release it from the old handle. Remove the broken handle — unbolt or unclip it from the door panel backing. Install the new handle — secure it to the door panel, reconnect the latch cable, and verify smooth operation before reinstalling the panel. Reinstall the door panel — line up the clips, press firmly around the perimeter, and reinstall all screws and trim pieces. Frequently Asked Questions Q: How do I know if I need the driver or passenger side?A: This is the DRIVER SIDE (LH/Left Hand) handle. If you're sitting in the driver's seat and the broken handle is on your door, this is the one you need. Q: Is this a complete handle assembly?A: Yes. This is the full interior door handle assembly — the part you pull to open the door from inside. It includes the handle, spring mechanism, and mounting points. Q: What causes the interior door handle to break?A: Most commonly, the plastic pivot pin or spring retainer fatigues over time, especially in cold climates where plastic becomes brittle. Pulling too hard on a frozen door can snap the handle. Q: Does this fit the rear doors?A: This handle is for the FRONT driver side door. Rear door handles may be different — check your specific model year for rear door compatibility. Q: How difficult is this to install?A: Moderate difficulty (2/5). You'll need to remove the interior door panel (a few screws and plastic clips), disconnect the door latch cable from the old handle, and install the new one. Most DIYers complete this in 30-60 minutes. Related Products Passenger Side Interior Door Handle for Altima 2013-2018 Interior Door Handle for Altima/Armada/Murano (Left)

Read more less

Product Overview The Adjustable Clip On Windshield Extension is a high-quality replacement component manufactured to exact OEM tolerances. Built with premium materials and rigorous quality control, this windshield delivers dependable, long-lasting performance at a fraction of dealership pricing. Key Features OEM-Spec Construction: Precision-engineered to match original equipment dimensions and performance standards — installs without modification. Durable Materials: Manufactured using high-grade materials selected for excellent wear resistance, corrosion protection, and long service life. Direct Fit Design: Drop-in replacement that matches factory mounting points, connectors, and clearances exactly. Quality Tested: Each unit undergoes thorough inspection and testing before shipment to ensure consistent, reliable performance. Exceptional Value: Matches dealer-part quality at a significantly lower cost — keep your vehicle running right without breaking the bank. Compatibility Designed as a direct replacement for the specified application. Please verify fitment using the OEM part numbers listed or contact our support team for assistance. Specifications Specification Detail Brand iFJF Direct Condition New Category Windshield Warranty 1-Year Limited Why Choose iFJF Direct? iFJF Direct specializes in premium aftermarket replacement parts that deliver OEM quality without the dealer price tag. Every product is backed by our commitment to accurate fitment, responsive US-based customer support, and fast shipping from our warehouse. Whether you're maintaining a daily driver, restoring a classic, or repairing a fleet vehicle — we're here to help you get the job done right the first time. Installation Guidance Before You Begin: Verify compatibility using your vehicle VIN or existing OEM part number. Clean Work Area: Remove debris, rust, or old gasket material from mating surfaces before installation. Use Proper Tools: Refer to your vehicle's factory service manual for recommended tools and torque specifications. Safety First: Always disconnect the battery before working on electrical components. Wear safety glasses and gloves. Professional Installation: While many of our parts are DIY-friendly, we recommend professional installation if you're unsure about the procedure. Q: Is this a direct replacement for the OEM part?A: Yes, this Adjustable Clip On Windshield Extension is manufactured to OEM specifications for exact fitment and function. No modifications are required for installation on compatible vehicles. Q: How do I verify this fits my vehicle?A: Check your existing OEM part number against the replacement numbers listed in the description. You can also use the year/make/model fitment guide above or contact our support team with your VIN. Q: What is the warranty period?A: This part is covered by a 1-year limited warranty against manufacturing defects. If you experience any issues, contact us for a free replacement or full refund. Q: How quickly will my order ship?A: Most orders ship within 1-2 business days from our US warehouse. Domestic delivery typically takes 3-7 business days. Tracking information is provided as soon as your order ships. Q: What is your return policy?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're not satisfied, return it in original condition for a full refund. We stand behind every product we sell. Q: How does the quality compare to the dealership part?A: Our aftermarket parts match OEM specifications in material, fit, and performance. You get the same quality and reliability at a significantly lower price — without the dealership markup. Order With Confidence Get your vehicle back on the road with the Adjustable Clip On Windshield Extension from iFJF Direct. Premium quality, fast shipping, and expert support — all backed by our satisfaction guarantee. Add to cart now and experience the iFJF Direct difference.

Read more less

Product Overview The 84565867 oil filter element is a high-performance replacement designed for heavy-duty equipment applications. Built to meet or exceed OEM specifications, this filter provides exceptional filtration efficiency, trapping harmful contaminants and extending engine life. Compatible with Case, New Holland, CLAAS, it features advanced filter media that maintains consistent oil flow while delivering maximum particle removal. Key Features High-Efficiency Media — Advanced filter media captures microscopic wear particles Heavy-Duty Construction — Built for demanding equipment and extended service intervals Consistent Oil Flow — Maintains proper oil pressure even in extreme temperatures Anti-Drain Back Valve — Prevents dry starts by retaining oil in the filter (where applicable) OEM Quality — Meets or exceeds OEM specifications for fit and performance Compatibility This 84565867 is designed to fit the following applications: Case New Holland CLAAS IVECO Note: Please verify your vehicle's year, make, model, and engine size before ordering. If you're unsure about compatibility, contact our support team with your VIN for confirmation. Specifications Part Number 84565867 Filter Type Oil Filter Element OEM Cross Reference Oil Filter Element for Case New Holland 2996570 CLAAS 11429540 IVECO 504179764 R Application Heavy-Duty / Agricultural Equipment Package Includes 1x Oil Filter Why Choose iFJF? Quality You Can Trust — Every iFJF product undergoes rigorous quality inspection before shipping Direct Fit Guarantee — Precision-engineered to match OEM specifications for hassle-free installation Affordable Excellence — OEM-grade quality without the dealership markup Fast & Reliable Shipping — Orders processed quickly from our US warehouses Expert Support — Our team of automotive specialists is here to help with any questions Frequently Asked Questions Q: How often should I replace this oil filter?A: Replace this oil filter with every oil change, typically every 250-500 hours for heavy equipment applications. Always follow your equipment manufacturer's recommended service interval. Q: Will this filter fit my equipment?A: This 84565867 oil filter is designed for Case, New Holland, CLAAS. Please verify your equipment's model and specifications against the compatibility information above. Q: What are signs of a failing oil filter?A: Symptoms include low oil pressure warning light, decreased engine performance, excessive engine noise, dirty oil shortly after a change, and engine overheating. Replace immediately if any of these signs appear. Q: Is this a genuine OEM filter?A: This is a premium aftermarket replacement manufactured to meet or exceed OEM specifications. It provides equivalent filtration performance and reliability at a more competitive price. Q: How do I properly dispose of used oil filters?A: Used oil filters should be drained completely and recycled at an authorized collection center. Many auto parts stores and service centers accept used filters and oil for recycling at no charge.

Read more less

Product Overview The iFJF Interior Door Handle is a direct OEM replacement for the driver side of 2006-2011 Chevrolet HHR. Designed to fix the infamous HHR broken door handle problem with a reinforced internal mechanism that addresses the weak plastic pivot point of the factory handle. Bright chrome finish matches OEM styling. Key Features Driver Side Specific: Exact fit for the driver side door — replaces OEM part number 19299614. Reinforced Pivot: Metal internal mechanism replaces the factory plastic pivot that causes premature failure. Bright Chrome Finish: Electroplated chrome matches or exceeds OEM appearance. Direct Bolt-In: Same mounting points and cable attachment — no modifications. DIY Friendly: Door panel removal required, but the handle swap is straightforward with basic tools. Compatibility Brand Model/Part Years/Notes Chevrolet HHR (Driver Side) 2006-2011 All Trims Chevrolet HHR LS/LT/LTZ 2006-2011 Chevrolet HHR SS 2008-2010 Chevrolet HHR Panel 2007-2011 Technical Specifications Specification Value Part Number 19299614 (Driver Side) Position Driver / Left Side Material Chrome-Plated with Metal Internal Pivot Finish Bright Chrome Fitment Direct OEM Replacement Installation Door Panel Removal Required Why Choose iFJF? Fix It Once, Fix It Right: The OEM handle will break again because it uses the same weak plastic design. Our reinforced mechanism is built to last. Factory-Match Chrome: Won't look out of place against your passenger side handle or other chrome interior trim. Affordable Repair: A fraction of what a dealer would charge for parts and labor. 1-Year Warranty: Covers manufacturing defects. Installation Remove the driver side door panel: pry off trim pieces, remove screws, and lift panel up and off. Carefully peel back the vapor barrier to access the handle assembly. Disconnect the door latch cable from the broken handle. Remove mounting screws and extract the old handle. Install the new iFJF handle, reconnect cable, and test before reassembling the door panel. Frequently Asked Questions Q: Do I need the passenger side too?A: If only your driver side handle is broken, this single handle is all you need. However, if one side has failed, the passenger side is likely not far behind. Consider our pair set for both sides.Q: Why do these handles break?A: The OEM design uses a thin plastic internal pivot. Over years of use and temperature cycling, the plastic becomes brittle and snaps — usually right at the pivot point.Q: Is installation difficult?A: Moderate DIY difficulty. Removing the door panel requires some care with trim clips. The handle swap itself is simple once you have access. Budget 30-45 minutes.Q: Will this match my existing passenger handle?A: Yes. The chrome finish is matched to OEM specifications. If your passenger handle is also chrome, they will be indistinguishable. Related Products Interior Door Handle Set Driver+Passenger HHR Related Blog Posts How to Install Tie Rods on your GM Truck

Read more less

Product Overview The iFJF Interior Door Handle Set is a complete driver and passenger side replacement for the 2006-2011 Chevrolet HHR. These chrome-finished interior door handles replace brittle factory plastic handles that commonly break at the pivot point. Constructed with reinforced metal internals for lasting durability. Key Features Complete Pair Set: Includes both driver side (19299614) and passenger side (19299613) handles — replace both at once for a matching look. Reinforced Construction: Metal internal pivot mechanism replaces the weak plastic pivot that causes factory handle failures. Chrome Finish: Bright chrome exterior matches OEM styling and adds a premium touch to the HHR interior. Direct Fit: Same mounting points, same cable attachment — no modifications needed. Restores Proper Function: Eliminates the floppy, broken handle feel and restores smooth door operation. Compatibility Brand Model/Part Years/Notes Chevrolet HHR 2006-2011 All Trims Chevrolet HHR LS/LT/LTZ 2006-2011 Chevrolet HHR SS 2008-2010 Chevrolet HHR Panel 2007-2011 Technical Specifications Specification Value Part Numbers 19299614 (Driver) / 19299613 (Passenger) Material Chrome-Finished Metal Internal Mechanism Finish Bright Chrome Fitment Direct OEM Replacement Installation Door Panel Removal Required Package 2-Piece Set (Left + Right) Why Choose iFJF? Fix a Known Weak Point: The Chevy HHR interior door handle is notorious for breaking. Our reinforced design addresses the root cause. Replace Both Sides: If one handle has broken, the other isn't far behind. Save money with the pair set. Premium Chrome Look: Matches or exceeds the OEM chrome finish for a factory-fresh appearance. 1-Year Warranty: Covers manufacturing defects. Installation Overview Remove the door panel: pry off trim pieces, remove screws (behind armrest and door pull), and lift the panel up and off. Peel back the vapor barrier carefully to access the handle assembly. Disconnect the door latch cable from the old handle. Remove the mounting screws and extract the broken handle. Install the new iFJF handle, reconnect the latch cable, and test operation before reassembling the door panel. Frequently Asked Questions Q: Why do HHR door handles break so often?A: The OEM handles use a thin plastic pivot point that becomes brittle over time, especially in cold climates. Repeated stress eventually causes the plastic to snap. Our handles use a reinforced metal mechanism to prevent this failure.Q: Do I need to replace both sides?A: It's highly recommended. If one side has broken, the other has experienced the same wear and tear. Buying the pair saves money vs. purchasing individually later.Q: Is this chrome or painted silver?A: This is genuine bright chrome electroplating — not silver paint. It matches the OEM chrome door handle finish on HHR LT and LTZ trims.Q: How difficult is the installation?A: Intermediate DIY level. Door panel removal takes about 10 minutes per side. The handle swap itself is straightforward once the panel is off. Budget 30-45 minutes per door for first-timers. Related Products Interior Door Handle Driver Side HHR 19299614 Related Blog Posts How to Install Tie Rods on your GM Truck

Read more less

Upgraded S3213 Marine Fuel Water Separator — Replaceable Filter Element Design The S3213 Fuel Water Separating Filter is the upgraded version of the classic marine fuel/water separator — now with a replaceable filter element that saves you money over the long run. Instead of throwing away the entire housing every service interval, simply swap the 10-micron filter cartridge and reuse the clear bowl. Designed for Mercury, Yamaha, Volvo Penta, and most outboard/inboard marine engines with 3/8" NPT fuel ports, this filter traps water, rust, and debris before they reach your injectors. Fits: All marine engines using S3213/S3214/B32013-style spin-on fuel water separators with 3/8" NPT threads. Key Features Replaceable Filter Element: Unlike traditional sealed S3213 filters, this version lets you replace only the 10-micron cartridge — keeping the clear bowl and reusing the housing. Lowers per-service cost by 50%+ compared to replacing the entire unit. 10-Micron High-Efficiency Filtration: Removes 90%+ of particles as small as 10 microns. Protects sensitive fuel injection systems on modern outboard, sterndrive, and inboard engines. Clear Visual Inspection Bowl: Transparent nylon bowl lets you see accumulated water and sediment at a glance. Drain before water reaches the filter element — no guesswork. Universal 3/8" NPT Ports: Standard thread pattern fits virtually all marine fuel systems. Lower pressure drop than smaller port designs — maintains full fuel flow at WOT. Corrosion-Resistant Construction: Durable plastic housing with anti-oxidation coating. Designed for the harsh marine environment — salt spray, humidity, and temperature swings. Compatibility — Replaces OEM Part Numbers OEM / Brand Part Number Mercury Marine 35-60494-1, 35-809097, 802893Q01 Yamaha S3213, S3214 Sierra 18-7932-1, 18-7928-1, 18-7922, 18-7919 Racor B32013, 120AT (spin-on type) Volvo Penta Cross-compatible with most spin-on separators Mallory 9-37800 series Specifications Filter Type Replaceable element fuel water separator Micron Rating 10 micron (nominal) Port Size 3/8" NPT (female) Bowl Material Clear nylon — visual water/sediment inspection Housing Material High-impact polymer with anti-corrosion treatment Includes Filter element + clear bowl (housing head sold separately or reuse existing) SKU FJ-WSFF03-ZH Why Upgrade to the Replaceable Element Version? The original S3213 is a sealed, one-piece design — when the filter clogs, you throw away the entire assembly. This upgraded version separates the filter element from the bowl: Lower long-term cost: Replacement cartridges cost as little as $6.33 each (3-pack). A traditional S3213 replacement costs $20-30 every time. Less waste: Only the filter media gets replaced — the bowl and housing are reused indefinitely. Faster service: Spin off the bowl, swap the element, spin it back on. No need to disconnect fuel lines. Better diagnostics: The clear bowl stays on the engine, so you can check for water accumulation between services. 🛒 Replacement Filter Cartridges Single Replacement Cartridge $10.00 10-micron element, fits this housing Shop Now → ⭐ 3-Pack — Best Value $19.00 ($6.33 each) Save 37% vs buying 3 singles Shop 3-Pack → Frequently Asked Questions Q: What's the difference between this and the standard S3213? A: The standard S3213 is a sealed one-piece unit — you replace the entire filter every time. This upgraded version has a replaceable filter element: you keep the clear bowl and housing, and only swap the internal 10-micron cartridge. It costs less per service and produces less waste. Q: Can I use this on my Mercury outboard? A: Yes. This filter directly replaces Mercury Marine part numbers 35-60494-1, 35-809097, and 802893Q01. It fits all Mercury outboard and sterndrive engines using the standard 3/8" NPT spin-on filter mount. Q: How often should I replace the filter element? A: Replace every 100 hours or annually, whichever comes first. In high-humidity environments or if you use ethanol-blended fuel, check the clear bowl monthly and replace at 50-hour intervals if you see significant water accumulation. Q: Does this include the mounting head/bracket? A: No — this product includes the filter element and clear bowl only. It's designed to fit your existing S3213 mounting head (3/8" NPT). If you need a complete assembly with mounting bracket, see our bracket listing. Q: Will this fit a Yamaha F150/F200/F250? A: Yes, as long as your Yamaha uses the standard S3213/S3214-style spin-on filter head with 3/8" NPT threads. This covers most Yamaha 4-stroke outboards from 50HP to 350HP. Q: How do I know when the filter needs replacing? A: Three signs: (1) Clear bowl shows dark sediment or water layer — replace immediately. (2) Engine stumbles or loses power at WOT — restricted fuel flow. (3) Water-in-fuel alarm triggers — drain and replace element. Q: Can I drain the water without replacing the filter? A: Yes. The clear bowl has a drain at the bottom. But if water has reached the filter element itself, the media may be compromised — replace the cartridge. Draining only removes bulk water; it doesn't restore a saturated filter element. Related Products S3213 Fuel Water Separator S3213 Replacement Cartridge Fuel Filter Base NPT Clear Water Collection Bowl

Read more less

Product Overview The iFJF Engine Valve Cover is a direct OEM-spec replacement for the 2.5L L4 QR25DE engine in 2002-2006 Nissan Altima and Sentra SE-R. This is the early-generation QR25DE cover (13264-3Z001 / 264-982), distinct from the 2007+ version. Manufactured from reinforced polymer with a pre-installed rubber gasket for leak-free sealing at a fraction of dealer cost. Key Features Early QR25DE Design: Specifically engineered for the 2002-2006 QR25DE engine — different bolt pattern and PCV layout from the 2007+ version. Verify your year before ordering. Pre-Installed Gasket: Factory-installed molded rubber gasket ensures perfect seal alignment out of the box. Heat & Oil Resistant Polymer: Reinforced construction rated for the high under-hood temperatures of daily-driven Nissan vehicles. Direct Bolt-On Fit: All mounting points and hose connections match the factory configuration exactly — no modifications needed. QC Inspected: Every cover undergoes inspection for gasket seating, surface flatness, and port alignment. Compatibility Table Year Make Model Engine 2002-2006 Nissan Altima 2.5L L4 QR25DE 2002-2006 Nissan Sentra SE-R 2.5L L4 QR25DE Specifications Specification Detail Part Number FJ-EVC07 OEM Numbers 13264-3Z001, 264-982 Material Reinforced Heat-Resistant Polymer Gasket Pre-Installed Molded Rubber Engine Nissan QR25DE 2.5L L4 (2002-2006) Installation Direct Bolt-On Warranty 12-Month Warranty Why Choose iFJF? The early QR25DE engines (2002-2006) are known for valve cover gasket degradation leading to oil leaks, pre-cat contamination, and misfire issues. Our iFJF cover provides OE-quality fit and sealing at significant savings. Important: This is for 2002-2006 models only — the 2007+ QR25DE uses a different design (see FJ-EVC02). Installation Tips Disconnect battery and remove ignition coils. Disconnect PCV hose and breather tube. Clean mating surface with brake cleaner and plastic scraper. Torque bolts to 74 in-lbs (8.4 Nm) in spiral pattern. Budget 45-90 minutes — straightforward bolt-on replacement. Frequently Asked Questions Q: Will this fit my 2005 Nissan Altima 2.5L?A: Yes. Direct fit for all 2002-2006 Altima with the 2.5L L4 QR25DE engine. Q: Does this fit 2007+ Altima?A: No. The 2007+ QR25DE uses a different valve cover design (see our FJ-EVC02 listing). This cover is specific to 2002-2006 models. Q: Is the gasket included?A: Yes. Factory-installed molded rubber gasket is pre-installed. Q: What are symptoms of a leaking valve cover?A: Burning oil smell (oil dripping on exhaust manifold), visible oil at cover edges, oil in spark plug wells, and misfire-related check engine codes. Q: DIY difficulty?A: Beginner-friendly. Basic metric socket set and torque wrench needed. Budget 45-90 minutes. Q: OEM comparison?A: Meets the same fitment and material specs as OEM 13264-3Z001/264-982 — at significant savings.

Read more less

Product Overview The 5801439820 Fuel Filter Kit for Case Magnum 235-380 & NH T8 T9 FR CR delivers professional-grade fuel filtration for diesel engines. Manufactured with advanced synthetic media for superior contaminant capture and water separation, this filter protects your high-pressure common rail injection system from the microscopic particles and moisture that cause premature injector and pump failure. As diesel injection pressures climb past 30,000 PSI in modern engines, fuel cleanliness has never been more critical. A single tank of contaminated fuel can cause thousands in injector damage. This filter provides the first and most important line of defense for your fuel system. Key Features High-Efficiency Filtration Media: Multi-layer synthetic media captures 99.9% of particles at the rated micron level, exceeding standard cellulose elements in both efficiency and dirt-holding capacity. Advanced Water Separation: Coalescing technology removes emulsified and free water from diesel fuel, preventing injector tip erosion and microbial growth. OEM-Spec Construction: Manufactured to ISO 9001 quality standards with precision-threaded base plate, anti-drain back valve, and high-burst-strength canister. Direct Fit Replacement: Engineered as a drop-in replacement — no modifications, adapters, or special tools required. Extended Service Life: Higher dirt-holding capacity means longer intervals between changes, reducing downtime and per-mile filtration costs. Compatibility Specification Detail Equipment Case Magnum, New Holland T8/T9/FR/CR Series Engine Agricultural Diesel Engines Replaces Part # 5801439820, 504350911, 4707408, PU10020X Micron Rating 2-10 Micron Absolute Filter Type Spin-On with Water Separation Why Upgrade Your Fuel Filtration? Extended Injector Life: Injectors operating at 30,000+ PSI have micron-level clearances. Better filtration means injectors lasting 200K+ miles instead of failing at 100K. Improved Cold-Weather Reliability: Superior water separation prevents ice crystal formation in fuel lines during winter. Reduced Maintenance Costs: Preventing one HPFP failure saves $5,000-$10,000 — the cost of a lifetime of premium filters. Better Fuel Economy: Clean injectors atomize fuel more efficiently, maintaining optimal combustion over the vehicle lifetime. Installation Guide Safety First: Park on level ground, engage parking brake, allow engine to cool. Have a drain pan ready. Relieve Fuel Pressure: Remove fuel cap. On some models, pull fuel pump fuse and crank briefly. Remove Old Filter: Use oil filter wrench to loosen. Unscrew by hand and lower into drain pan. Prep New Filter: Apply thin film of clean diesel to gasket. Pre-fill if housing design allows. Install: Spin on by hand until gasket contacts. Tighten 3/4 to 1 full turn. DO NOT over-tighten with wrench. Prime System: Cycle key ON (not START) 5-6 times for 30 seconds each to purge air. Check for leaks. Start & Verify: Start engine, check for leaks at idle, let run 2 minutes, recheck. Dispose of old filter properly. Frequently Asked Questions Q: Will this fit my Case Magnum 280?A: Yes. This filter fits Case Magnum 235-380 models including the 280. It also fits New Holland T8, T9, FR forage harvester, and CR combine series. Verify your engine serial number against OEM part numbers 504350911 or 4707408. Q: What micron rating is this filter?A: 2-micron absolute synthetic media — providing superior contaminant removal compared to standard cellulose filters. Lower micron = better protection for high-pressure common rail injection systems. Q: How often should I replace this filter?A: Replace every 500 hours or annually, whichever comes first. For heavy-duty harvesting in dusty conditions, consider 250-hour intervals. Replace water separator element at the same time. Q: Is this OEM or aftermarket?A: High-quality aftermarket replacement manufactured to strict ISO 9001 standards. Meets or exceeds OEM specifications for 5801439820, 504350911, and 4707408 at a fraction of dealer price. Q: Can I install this myself?A: Yes — basic mechanical skills sufficient. Unscrew old filter, clean mounting surface, apply thin film of clean diesel to new gasket, hand-tighten 3/4 turn after gasket contact. No special tools required. Related Products Shop All Fuel Filters & Water Separators → Diesel Engine Oil Filters → Air Filters — Complete Intake Protection → Related Guides & Articles Diesel Fuel System Maintenance: Complete Guide → How to Prevent Diesel Fuel Contamination → Common Rail Diesel Injector Failure: Warning Signs →

Read more less

Product Overview The iFJF Engine Valve Cover is a direct OEM-spec replacement for the 2.5L L4 QR25DE engine in 2007-2013 Nissan Altima, 2007-2011 Altima Hybrid, and 2007-2012 Sentra SE-R. Manufactured from reinforced polymer with a pre-installed rubber gasket, this valve cover eliminates oil leaks and restores proper crankcase pressure — at a fraction of dealership cost. Key Features QR25DE 2.5L Specific: Engineered for the 2007+ QR25DE 2.5L L4 engine platform — correct bolt pattern, PCV routing, and sensor port alignment. Pre-Installed Rubber Gasket: Factory-installed molded gasket eliminates separate gasket sourcing and ensures perfect seal alignment from the first bolt. Reinforced Polymer Construction: Heat and oil-resistant polymer withstands the demanding under-hood environment of daily-driven Nissan sedans. Complete Kit: Includes valve cover assembly with pre-installed gasket — ready to install out of the box. QC Inspected: Every cover is checked for gasket seating, surface flatness, and port alignment before shipment. Compatibility Table Year Make Model Engine 2007-2013 Nissan Altima 2.5L L4 QR25DE 2007-2011 Nissan Altima Hybrid 2.5L L4 QR25DE 2007-2012 Nissan Sentra SE-R 2.5L L4 QR25DE Specifications Specification Detail Part Number FJ-EVC02 OEM Numbers 13264-JA00A, 13270-JA00A Material Reinforced Heat-Resistant Polymer Gasket Pre-Installed Molded Rubber Engine Nissan QR25DE 2.5L L4 Installation Direct Bolt-On Warranty 12-Month Warranty Why Choose iFJF? The QR25DE engine is reliable — but its valve cover gasket is a known wear item. As the gasket hardens from heat cycling, oil seeps onto the exhaust manifold (causing a burning smell) and into spark plug wells (causing misfires). Our iFJF replacement cover solves this at a fraction of the dealer price. Installation Tips Disconnect battery before starting work. Remove ignition coils and PCV hose for access. Clean mating surface thoroughly with brake cleaner. Torque bolts to 74 in-lbs (8.4 Nm) in spiral pattern from center. Budget 45-90 minutes for DIY — straightforward bolt-on replacement. Frequently Asked Questions Q: Will this fit my 2009 Nissan Altima 2.5L?A: Yes. Direct fit for all 2007-2013 Altima with the 2.5L L4 QR25DE engine. Q: Does this fit the 2002-2006 Altima?A: No. The 2002-2006 QR25DE uses a different valve cover design (see our FJ-EVC07 listing). This cover is for 2007+ models. Q: Is the gasket included?A: Yes. The valve cover comes with a pre-installed molded rubber gasket. Q: What are signs of a bad valve cover?A: Burning oil smell from engine bay, visible oil seepage at cover edges, oil in spark plug wells, and check engine codes for misfires. Q: DIY difficulty?A: Beginner-friendly. Basic hand tools required. Budget 45-90 minutes. Q: OEM comparison?A: Matches OEM specifications (13264-JA00A/13270-JA00A) for fit and material quality at significant savings.

Read more less

Product Overview The iFJF Engine Valve Cover set is a direct OEM-spec replacement for the 3.5L V6 VQ35DE engine in 2002-2009 Nissan Altima, Maxima, Murano, Quest, and 2002-2004 Infiniti I35. Includes both front (13264-7Y000/264-984) and rear (13264-7Y010/264-985) covers with pre-installed gaskets and spark plug tube seals. Eliminates oil leaks and restores proper crankcase ventilation at a fraction of dealer cost. Key Features Complete Front & Rear Set: Includes both front bank (13264-7Y000/264-984) and rear bank (13264-7Y010/264-985) covers — everything needed for a full V6 valve cover replacement. Pre-Installed Gaskets & Tube Seals: Both covers arrive with factory-installed molded rubber gaskets and spark plug tube seals — no separate parts sourcing required. VQ35DE-Specific Engineering: Designed specifically for the Nissan VQ35DE 3.5L V6 platform — correct bolt alignment, oil baffle positioning, PCV port location, and sensor mount points. Heat-Cycle Resistant Polymer: Constructed from reinforced polymer rated for the high operating temperatures of the VQ engine series, resisting warping and cracking over time. Plug-and-Play Installation: All mounting points, PCV ports, and sensor openings match OEM configuration exactly — direct bolt-on replacement. Compatibility Table Year Make Model Engine 2002-2006 Nissan Altima 3.5L V6 VQ35DE 2002-2008 Nissan Maxima 3.5L V6 VQ35DE 2003-2007 Nissan Murano 3.5L V6 VQ35DE 2004-2009 Nissan Quest 3.5L V6 VQ35DE 2002-2004 Infiniti I35 3.5L V6 VQ35DE Specifications Specification Detail Part Number FJ-EVC06 Front OEM 13264-7Y000, 264-984, 13264-8J102 Rear OEM 13264-7Y010, 264-985, 13264-8J113, 13264-ZA30A Material Reinforced Heat-Resistant Polymer Gaskets Pre-Installed (Both Covers) Engine Nissan VQ35DE 3.5L V6 Warranty 12-Month Warranty Why Choose iFJF? The VQ35DE is one of Nissan's most popular V6 engines, powering millions of Altimas and Maximas. Its valve covers are a known maintenance item — gasket degradation leads to oil in spark plug wells, misfires, and burning oil smell. Dealership replacement can cost $500+. Our iFJF set provides OE-quality sealing at significant savings with pre-installed gaskets for faster installation. Installation Tips Remove the upper intake manifold (plenum) to access the rear valve cover. Replace the intake plenum gasket during reassembly to prevent vacuum leaks. Clean all mating surfaces with brake cleaner and a plastic scraper. Torque cover bolts to 74 in-lbs (8.4 Nm) following factory tightening sequence. Budget 3-5 hours for a first-time DIY mechanic — the rear cover requires more disassembly. Frequently Asked Questions Q: Will this fit my 2005 Nissan Altima 3.5L?A: Yes. Direct fit for all 2002-2006 Altima with the 3.5L V6 VQ35DE engine. Q: Are both front and rear covers included?A: Yes. This set includes the front bank cover (13264-7Y000/264-984) and rear bank cover (13264-7Y010/264-985) with pre-installed gaskets. Q: Why does the VQ35DE valve cover leak?A: Over time, the rubber gasket hardens from heat cycling, losing its ability to seal. Spark plug tube seals also degrade, allowing oil into the spark plug wells. Q: Is this a difficult DIY job?A: The front cover is straightforward (1-2 hours). The rear cover requires removing the intake plenum and is more involved. Budget 3-5 hours total for a first-time DIYer. Q: How does this compare to OEM Nissan?A: Meets the same material and dimensional specifications as the Nissan OEM parts (13264-7Y000/7Y010) at 50-60% savings. Q: Do I need to replace the intake gasket?A: Yes, we strongly recommend replacing the intake plenum gasket when reinstalling the manifold. Old gaskets can cause vacuum leaks and check engine codes.

Read more less

Product Overview The P608667 Obround Air Filter Replacement is a premium-grade replacement air filter engineered to deliver OEM-level performance at an aftermarket price. Designed for Case applications (Various), this component ensures your engine receives proper filtration for optimal performance and longevity. Cross-References: CA5791, P608667 Key Features & Benefits Engine Protection: Traps harmful dust, dirt, and debris before they reach your engine cylinders Optimal Airflow: Precision pleat geometry maximizes airflow for better combustion and fuel economy Durable Construction: Heavy-duty sealing gaskets prevent unfiltered air bypass Easy Installation: Direct fit replacement — no modifications needed for listed applications Quality Assured: Each unit undergoes rigorous quality control testing before shipment Vehicle Compatibility 📋 Cross-Reference Compatibility OEM Part Numbers CA5791, P608667 Fitment Years Various Vehicle Applications Case Why Choose iFJF? At iFJF Direct, we specialize in providing diesel and heavy-duty vehicle owners with high-quality replacement parts at competitive prices. Our air filters are sourced from trusted manufacturers and backed by our commitment to quality and customer service. ✅ OEM-Spec Quality Without the OEM Price ✅ Fast Shipping from US Warehouses ✅ Dedicated Customer Support Team ✅ 30-Day Easy Returns Technical Specifications 📐 Technical Specifications Filtration Efficiency ≥99.9% at Rated Particle Size Media Type High-Capacity Pleated Cellulose Media Design Type Direct OEM Replacement Replacement Interval Per Vehicle Manufacturer Recommendations Package Includes 1x Air Filter (as shown in listing images) Frequently Asked QuestionsQ: How often should I replace the air filter?A: In normal conditions, every 15,000-30,000 miles. In dusty/off-road environments, inspect monthly and replace every 6-12 months.Q: Can I clean and reuse this air filter?A: No, this is a disposable cellulose media filter. Washing or blowing out damages the media and reduces efficiency.Q: What are signs my air filter needs replacement?A: Reduced fuel economy, black smoke from exhaust, rough idle, slow acceleration, or a dirty/dark visual inspection.Q: Do you offer a warranty?A: Yes! All iFJF products come with our satisfaction guarantee. Contact us if you experience any issues. Q: How fast do you ship?A: Orders ship within 1-2 business days from our US warehouses. Typical delivery is 3-7 business days depending on your location.

Read more less

Product Overview The 300-1457 Replacement For KWIKEE 1010002326 25Series RV Step Motor 094707-05-701 is a direct OEM-spec replacement motor for Kwikee electric RV steps. Restores smooth, quiet step operation with a pre-wired connector for simple plug-and-play installation. Weather-resistant sealed construction for exterior RV use. Key Features Premium Quality: Manufactured to meet or exceed OEM specifications Direct Fit: Precision-engineered for seamless bolt-on installation Durable Construction: High-grade materials for long service life Cost-Effective: OEM-quality performance at a fraction of dealership pricing Fast US Shipping: Orders ship from our warehouse within 1-2 business days Easy Installation: Designed for straightforward DIY or professional installation Compatibility Compatible with KWIKEE models. Always verify fitment using OEM part numbers before ordering. Contact our support team with your VIN or model details for compatibility confirmation. Specifications Specification Detail Brand iFJF Condition New Make KWIKEE Why Choose iFJF Direct? Quality You Can Trust: Every product manufactured to strict quality control standards Direct Fit Guarantee: Precision engineering ensures proper fitment and function Fast US Shipping: Orders ship from our warehouse network within 1-2 business days Expert Support: Knowledgeable team available for fitment and installation guidance Value Pricing: Premium quality without the dealership or brand-name markup Frequently Asked Questions Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement part manufactured to meet or exceed OEM specifications. Q: What if this part doesn't fit my vehicle?A: Please verify fitment before ordering. We accept returns on unused items in original packaging within 30 days. Q: How fast is shipping?A: Orders typically ship within 1-2 business days from our US warehouse network. Transit time depends on your location. Q: Do you offer a warranty?A: iFJF products are backed by our quality commitment. Contact our support team for warranty details. Q: How do I contact support?A: Visit ifjf.net/contact or email our support team. We're available to assist with fitment questions, installation guidance, and order support. Installation Notes We recommend professional installation for best results. Always consult your vehicle or equipment service manual before beginning any repair. Verify component compatibility with your specific model and year before installation. Disconnect the battery before working on any electrical components.

Read more less