Search results for "fuel filter diesel"

Hayward H-Series Field Wiring Panel Kit — FDXLFWP1930 The FDXLFWP1930 Field Wiring Panel is a complete replacement kit for Hayward Universal H-Series pool and spa heaters. When your original wiring panel has corroded terminals, damaged connectors, or burnt traces from electrical faults, this direct-fit replacement restores safe, reliable electrical connections — no splicing, no guesswork. Key Features Complete Panel Assembly: Includes the wiring panel board with all factory connectors pre-installed — exactly matches the original Hayward layout Corrosion-Resistant Terminals: Heavy-duty brass and tin-plated connectors resist oxidation from pool chemical exposure Clear Labeling: Every terminal position is clearly marked to match the heater's wiring diagram — eliminates connection errors High-Temperature Rating: Panel board and connectors rated for the heat generated inside the heater cabinet during operation Universal H-Series Fit: Compatible with all Hayward Universal H-Series Low NOx heater models Compatibility Specification Detail Part Number FDXLFWP1930 Series Hayward Universal H-Series Low NOx Models H150FDN, H200FDN, H250FDN, H300FDN, H350FDN, H400FDN Type Field Wiring Terminal Panel with Connectors Installation Safety Checklist TURN OFF POWER at the main breaker and at the heater's service disconnect Verify power is off with a non-contact voltage tester Label or photograph all existing wire connections before removing Remove old panel and inspect the cabinet for signs of water damage Mount new FDXLFWP1930 panel using existing screw locations Reconnect wires one at a time, matching labels to terminals Double-check all connections are tight before restoring power Frequently Asked Questions Q: How do I know if my wiring panel needs replacement?A: Signs include: burnt or discolored terminals, loose wire connections, visible corrosion, cracked plastic housing, or intermittent electrical issues that can't be traced to other components. Q: Is professional installation required?A: If you're comfortable with basic electrical work and follow safety procedures, this is a DIY-friendly replacement. If you're unsure, hire a licensed electrician or pool service professional. Q: Will this work with my older H-Series heater (non-Low NOx)?A: The FDXLFWP1930 is specifically designed for Universal H-Series Low NOx models. Please verify your heater's exact model number before ordering. 🔗 Explore More from iFJF Find the right part for your vehicle or equipment: Browse All Products Fuel Filters Collection Auto Accessories

Read more less

Product OverviewThe 698781 is a precision-manufactured replacement component designed for 698781 o-ring float bowl carburetor gasket for nikki carburetor lawn mowers (5 pack). Made from high-quality materials that resist fuel degradation and heat cycling, this gasket ensures a proper seal between carburetor components, preventing air leaks and maintaining optimal fuel mixture. Direct OEM-spec fitment for hassle-free installation.Ideal for lawn mower repair shops, small engine mechanics, and DIY enthusiasts performing carburetor rebuilds. A fresh gasket is essential for reliable engine starting and smooth operation after carburetor service.Key Features Precision Fit: Manufactured to exact OEM specifications for perfect sealing Fuel-Resistant Material: Engineered to withstand ethanol-blended fuels and heat cycling Air Leak Prevention: Proper seal prevents lean running conditions and hard starting Multi-Pack Value: Bulk packaging provides excellent value for repair shops and frequent DIY use Compatibility & FitmentDesigned for Nikki carburetors commonly found on Briggs & Stratton small engines used in lawn mowers, generators, pressure washers, and other outdoor power equipment. Verify your carburetor model before ordering.Technical Specifications Specification Value Part Number 698781 Application Carburetor Float Bowl Seal Material Fuel-Resistant Nitrile/Viton Carburetor Type Nikki Carburetor Engine Applications Briggs & Stratton Small Engines Why Choose iFJF Direct? Quality Assurance: Every iFJF product is manufactured to meet or exceed OEM specifications Fast USA Shipping: Orders ship from our US warehouse within 1-2 business days Best Price Guarantee: Premium quality at competitive prices with no dealer markup Expert Support: Our team of automotive and marine specialists is ready to help with fitment questions Hassle-Free Returns: 30-day return policy if the part doesn't fit your application Installation Tips1. Verify fitment by comparing your old part with product images. 2. Gather necessary tools before starting installation. 3. Clean all mounting surfaces thoroughly. 4. Follow factory service manual torque specifications where applicable. 5. Test operation after installation to confirm proper function.Frequently Asked QuestionsQ: Will this gasket fit my Briggs & Stratton engine?A: This gasket is designed for Nikki carburetors commonly found on Briggs & Stratton engines. Verify that your engine uses a Nikki carburetor before ordering.Q: How do I know if my float bowl gasket needs replacement?A: Signs include fuel leaking from the carburetor, hard starting, rough idle, or visible cracking/deterioration of the old gasket.Q: Is this a 5-pack?A: Yes, this listing is for a 5-pack of gaskets, providing excellent value for repair shops and multiple engine maintenance.

Read more less

Carburetor Rebuild Kit for Edelbrock 1405-1411 — Economy Kit Without Float This cost-effective rebuild kit contains all the wear components needed to restore your Edelbrock Performer Series carburetor (models 1405-1411) — without the unnecessary expense of replacing floats that are typically still serviceable. Perfect for the DIY mechanic who wants to fix drivability issues without paying for parts they don't need. What's Included (No Float) Air horn gasket — Non-stick coated for clean future removal Main body to base plate gasket — Precision die-cut composite material Accelerator pump assembly — 30cc plunger with ethanol-compatible cup seal Needle & seat assemblies (2) — Viton-tipped, matched pair for both float bowls Float bowl gaskets (2) — Cork-rubber composite for superior sealing Base plate to manifold gasket — Thick flange gasket prevents vacuum leaks O-rings and small seals — For mixture screws, idle air bleeds, and transfer tube Check needle retainer and check ball — Accelerator pump circuit small parts Compatible Models Model CFM Choke 1405 600 Manual 1406 600 Electric 1407 750 Manual 1408 500 Electric 1409 600 Electric (Marine) 1410 750 Electric 1411 750 Electric Why Choose the No-Float Kit? Save money — Brass and Nitrophyl floats rarely fail; only replace if actually needed Same quality gaskets and seals — Identical materials to the full master kit Includes everything that typically wears — Gaskets shrink, accelerator pump cups harden, needle tips groove Ideal for routine maintenance — Annual rebuild to combat ethanol fuel degradation Frequently Asked Questions Q: Why buy this kit instead of the full master kit?A: If your floats are fine (not saturated, no leaks), this kit saves money while providing 100% of the wear items that actually need replacement. Q: How do I check if my floats need replacement?A: For brass floats: submerge in hot water and look for bubbles. For Nitrophyl floats: weigh on a gram scale — if weight exceeds factory spec by more than 10%, replace. Q: Does this fit the 1406 electric choke?A: Yes. The 1406 uses the same gaskets and components as the 1405 manual choke. Q: Are the gaskets ethanol-resistant?A: Yes. All gaskets, O-rings, and the accelerator pump cup are manufactured from modern fuel-resistant materials compatible with up to E15 ethanol blends. Related ProductsBrowse more in our collection. Search by part number

Read more less

2.0T Vacuum Pump Rebuild Gasket Seal Kit O-Ring for 2005-200 — Pool Equipment Replacement Built to Last Keep your pool or spa running efficiently with this precision-engineered replacement component from iFJF. Manufactured from chemical-resistant materials specifically selected for long-term exposure to chlorine, bromine, and salt water environments, this part delivers the same fit and function as the original manufacturer component at a fraction of the cost. Whether repairing a leaking valve, upgrading worn-out fittings, or performing seasonal maintenance, trust iFJF for parts that last season after season. Pool and spa equipment faces unique challenges — constant water pressure, chemical corrosion, UV exposure, and seasonal temperature swings. Inferior replacement parts can fail within a single season, leading to leaks, equipment damage, and costly emergency repairs. Our parts are manufactured to commercial-grade standards using UV-stabilized, chemical-resistant thermoplastics and corrosion-proof hardware for reliable performance year after year. Key Features & Benefits Chemical-Resistant Construction: Materials specifically engineered for chlorine, bromine, salt, and pH chemical resistance — will not crack, warp, or deteriorate like generic plumbing parts. UV-Stabilized Formula: Outdoor-rated materials resist sun damage, fading, and embrittlement from extended sunlight exposure in pool equipment installations. Precision Fit: Machined to exact OEM dimensions for leak-free connections and smooth operation — no forcing, modifications, or improvisation needed. Easy DIY Installation: Direct replacement requires only basic hand tools. Most installations take 15-30 minutes, saving you hundreds in service call fees. Quality Guaranteed: Every part undergoes dimensional verification and pressure testing before shipping. Backed by iFJF 1-year warranty and 30-day returns. Technical Specifications Specification Detail Material Heavy-Duty PVC / ABS / Glass-Filled Nylon Connection Type Threaded NPT / Slip Socket (model dependent) Pressure Rating Up to 50 PSI Working / 150 PSI Burst Chemical Compatibility Chlorine, Bromine, Salt, Muriatic Acid, Standard Pool Chemicals Temperature Range 32°F to 140°F Operating Frequently Asked Questions Q: Will this fit my specific pool equipment model?A: Please verify the dimensions, connection type, and thread size against your existing equipment. Most pool plumbing follows standard NPT or slip fitting dimensions. Message us your equipment model number for a definitive fitment check. Q: Is this part chlorine and chemical resistant?A: Yes, the materials are specifically selected for long-term exposure to pool and spa chemicals including chlorine, bromine, salt, and standard pH adjusters. Properly maintained, this part provides years of reliable service. Q: Can I install this myself or do I need a professional?A: Most pool equipment replacement parts are DIY-friendly with basic hand tools. Shut off the pump, relieve system pressure, swap the part, and test for leaks. Typical installation takes 15-30 minutes. Q: Is this an OEM or aftermarket part?A: This is a premium aftermarket replacement manufactured to match or exceed OEM specifications in quality and fit — at significant savings versus pool supply store pricing. Q: What is your return and warranty policy?A: 30-day hassle-free returns and 1-year warranty. If you receive an incorrect or defective part, we ship a replacement or issue a full refund — no restocking fees, ever. Explore More from iFJF Looking for related parts and accessories? Browse our complete selection of diesel filters, RV parts, pool equipment, and automotive components — all backed by fast US shipping and our satisfaction guarantee.

Read more less

Product Overview Upgrade your vehicle with this premium suspension enhancement system, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for Silverado, Sierra (1996-2010), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles Silverado, Sierra Year Range 1996-2010 Replaces OEM Part # GMFK25S, Suspension, Enhancement, System, 1996-2010, Silverado iFJF SKU FJ-GMFK25S Brand iFJF Technical Specifications Specification Detail Product Type Suspension Enhancement System — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the suspension enhancement system and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Suspension 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 10-Piece Front Suspension Kit for Audi A4/A5/S4/S5/Q5 10PCS Control Arm Kit for BMW X5 E53 📚 Installation & Maintenance Guides How to Install Tie Rods on GM Truck | Dmax XD Upgrade Ball Joint Removal/Install on 2018 Ram 4500/5500 Diesel How to Install a 3" Body Lift on 1995 Ford F-150

Read more less

Front Lower Forward Control Arm Pair for Mercedes-Benz C-Class & E-Class Coupe Direct replacement pair of front lower forward control arms for W204 (C-Class) and C207/A207 (E-Class Coupe/Cabriolet) platforms. Each arm includes a pre-installed sealed ball joint and OEM-spec rubber bushing — ready for bolt-on installation. Fits BOTH RWD and 4Matic (AWD) configurations on compatible models. Manufactured from forged steel with an E-coated corrosion-resistant finish. Vehicle Fitment Model Drivetrain Years Chassis C230 4Matic AWD 2008-2009 W204 C300 4Matic AWD 2008-2011 W204 C300 RWD 2012-2014 W204 C350 4Matic AWD 2012-2015 W204 E350 Coupe 4Matic AWD 2012-2014 C207 E400 Coupe 4Matic AWD 2015-2018 C207 Package Contents 1x Front Driver Side Forward Lower Control Arm with Pre-Installed Ball Joint 1x Front Passenger Side Forward Lower Control Arm with Pre-Installed Ball Joint Mounting Hardware Kit (Bolts, Nuts, Washers) Key Features Forged Steel Construction: Meets or exceeds Mercedes-Benz OEM strength and durability requirements Pre-Greased & Sealed Ball Joints: Maintenance-free design — no zerks to lubricate, permanently sealed against contaminants OEM-Spec Rubber Bushings: Matches factory durometer for ideal combination of ride comfort, NVH isolation, and steering response Dual Drivetrain Compatibility: Unlike most W204 control arms, this forward position arm fits both RWD and 4Matic configurations E-Coated Corrosion Protection: Resists rust, pitting, and winter salt damage for long service life Technical Specifications Spec Detail Position Front Lower Forward (Both Sides) Material Forged Steel, E-Coated Ball Joint Sealed, Pre-Greased, Non-Serviceable Bushing OEM-Spec Rubber Drivetrain RWD & 4Matic Compatible Warranty 2-Year / 24,000-Mile Symptoms of Worn Forward Control Arms Clunking Over Bumps: Metallic thumping noise from the front suspension when driving over uneven surfaces Steering Wander: Vehicle drifts or requires constant minor steering corrections at highway speeds Uneven Tire Wear: Inner edge tire wear — classic Mercedes control arm bushing failure symptom Vague Steering Feel: Steering response feels delayed or imprecise — especially during lane changes Visible Bushing Damage: Rubber bushings show cracking, tearing, or separation from the metal sleeve Frequently Asked Questions Q: Does this fit both RWD and 4Matic?A: Yes — this forward lower control arm is one of the few W204/C207 suspension components that is shared between RWD and 4Matic configurations. Verify your model year and engine match the fitment table above. Q: Are the ball joints replaceable separately?A: No. The ball joints are integral to the control arm and cannot be replaced individually. The entire arm must be replaced as a complete assembly — which is why we include them pre-installed. Q: How do I know if my forward control arms are bad?A: Common symptoms include clunking over bumps, steering wander at highway speeds, uneven inner-edge tire wear, and visible cracks or tears in the rubber bushing. A mechanic can confirm with a pry bar test for excessive bushing movement. Q: Do I need to replace both sides at once?A: Yes. Control arms should always be replaced in pairs (left + right). Replacing only one side creates uneven suspension response and can cause unpredictable handling and accelerated tire wear. Q: Will an alignment be required?A: Yes. Professional alignment is mandatory after any control arm replacement. The forward control arm directly affects caster and toe settings — skipping alignment will result in rapid tire wear. Q: How does this compare to genuine Mercedes-Benz parts?A: Our forged steel control arms meet or exceed OEM specifications for material strength, bushing durometer, and ball joint tolerances. They provide the same fit, function, and durability as dealer parts at a significantly lower cost — backed by our 2-year warranty. Related Products Mercedes C250/C300 W204 RWD Control Arm Kit (4-Piece) 10PCS BMW X5 E53 Control Arm Kit BMW 745i/745Li Control Arm Kit Related Products Mercedes S65 AMG 2pcs Suspension Lower Rearward Control Arms BMW 128i 323i 325i 328xi 10PCS Rear Control Arm Kit Chevy GMC V8 C/K Truck Exhaust Header 1988-1997 Related Guides & Articles Ball Joint Removal/Install on 2018 Ram 4500/5500 Diesel How to Install Tie Rods on Your GM Truck | Dmax XD Tie Rod Upgrade How to Replace the Serpentine Belt on a 5.9 & 6.7L Cummins

Read more less

Product Overview The iFJF 264-965 Engine Valve Cover for 1999-2008 Chevy GMC Sierra 1500 2500 4.8L 6.0L V8 is a high-quality aftermarket replacement part designed for 1999-2007 Chevy, GMC, Sierra models. This direct-fit component meets or exceeds OEM specifications at a fraction of dealer pricing. Backed by iFJF's commitment to quality and US-based customer support. Key Features Premium Construction — Manufactured from high-grade materials selected for durability and performance in demanding applications. Direct Fit Design — Precision-engineered to match factory mounting points, connectors, and specifications. No modifications, cutting, or fabrication required. OEM-Spec Performance — Designed to meet or exceed original equipment specifications for reliable, consistent operation. Easy Installation — Bolt-on or plug-and-play design for straightforward DIY installation with basic hand tools in most applications. Quality Assurance — Every iFJF part undergoes rigorous quality inspection before shipping to ensure perfect fit and function. Compatibility Designed for 1999-2007 Chevy, GMC, Sierra vehicles and equipment. Please verify your specific model year and engine configuration before ordering. Contact our support team if you need assistance confirming fitment for your application. Specifications Specification Details Brand iFJF Fitment 1999-2007 Chevy, GMC, Sierra Condition New Installation Direct Replacement Why Choose iFJF iFJF is a trusted supplier of aftermarket auto parts, diesel performance components, and powersports accessories. We source directly from ISO-certified manufacturers and stand behind every product with responsive US-based customer service. Save money vs. dealer pricing without compromising on quality or fit. Frequently Asked Questions Q: Will this fit my 1999-2007 Chevy, GMC, Sierra model?A: This part is designed for 1999-2007 Chevy, GMC, Sierra. Please check the compatibility information above and confirm your exact year, make, model, and engine before ordering. Contact us with your VIN for a fitment guarantee. Q: Is this an OEM part?A: This is a high-quality aftermarket replacement manufactured to meet or exceed OEM specifications. It offers the same fit and function as the original at a significantly lower cost. Q: What's included in the package?A: The package includes the 264-965 Engine Valve Cover for 1999-2008 Chevy GMC as shown in the product images. Any additional hardware, gaskets, or accessories are shown in the listing photos. Q: Is professional installation required?A: Installation difficulty varies by application. Most customers complete installation with basic mechanical skills and common hand tools. Professional installation is always recommended if you're unsure. Q: What is the warranty?A: iFJF products come with a warranty against manufacturing defects. Please retain your order information and contact our support team if you experience any issues. Q: How fast is shipping?A: Orders typically ship within 1-2 business days from our US warehouse. Free shipping is available on orders $50+. Expedited shipping options are available at checkout.

Read more less

Product Overview The iFJF RV Leveling Scissor Jack Drill Socket transforms campsite setup from a tedious chore into a 30-second task. Precision-machined from zinc-plated steel, this adapter socket fits both 3/8" and 1/2" drill chucks, letting your cordless drill power through stabilizer jack extensions effortlessly. Compact enough to live permanently in your RV toolkit. Key Features Dual-drive compatibility — fits 3/8" and 1/2" drill chucks Zinc-plated forged steel — built to handle repeated high-torque use Reduces campsite setup time by up to 70% Compact 4-inch length fits easily in RV tool storage Also compatible with manual ratchet wrenches Hexagonal base for secure drill chuck grip — no slipping Vehicle Compatibility Make Model Year Range Engine Universal RV Scissor Jacks All N/A Universal Trailer Stabilizer Jacks All N/A Universal Camper Leveling Systems All N/A ⚠️ Always verify fitment with your vehicle's specifications before ordering. Contact our support team for compatibility questions. Technical Specifications Brand iFJF SKU FJ-AD28-SI Drive Size 3/8" & 1/2" Material Zinc-Plated Forged Steel Length Approx. 4 inches Warranty 12-Month Limited Installation Guide Insert socket into drill chuck (3/8" or 1/2"). Place onto scissor jack drive nut. Operate drill at moderate speed for extension/retraction. Finish with manual check for safety. Frequently Asked Questions Q: Will this work with my cordless drill? Yes — compatible with any drill accepting 3/8" or 1/2" bits. Recommend 18V+ drills for optimal torque on larger stabilizer jacks. Q: Can I use this without a drill? Absolutely. The hexagonal base works with standard ratchet wrenches. A drill simply speeds up the process significantly. Why Choose iFJF? Quality Assurance: Every product is tested to meet or exceed OEM specifications for fit, function, and durability. Fast USA Shipping: Orders ship from our domestic warehouses with full tracking — typically delivered within 3-7 business days. Expert Support: Our US-based team of automotive specialists is ready to assist with fitment, installation, and technical questions. Hassle-Free Returns: 30-day return window on all iFJF products — no questions asked. Direct-to-Consumer Value: Premium quality without the dealer markup — save 30-60% vs. OEM pricing. Package Includes 1x iFJF TST-129 RV Leveling Scissor Jack Socket Zinc Plated Drill Ad Installation hardware (where applicable) Quick-start guide Related iFJF Products 🔗 iFJF RV Water Filter Multi-Layer Filtration 🔗 iFJF RV Stair Entry Step Motor for Kwikee 🔗 iFJF RV Awning Motor for Solera LCI Lippert Helpful Resources 📖 Complete Guide to Diesel Aftermarket Maintenance 📖 How to Choose the Right Replacement Auto Parts 📖 Top 10 DIY Upgrades for Your Truck or SUV

Read more less

Carburetor Repair Kit for IH Farmall Tractors — 0236821 Replacement Keep your International Harvester Farmall tractor running strong with this complete carburetor repair kit. Designed for the iconic Farmall M, Super M, MV, MTA, and 300/350/400/450/460/544 series tractors, this kit replaces the difficult-to-source IH part #0236821 with all gaskets, seals, needle/seat, and Welch plugs needed to rebuild the Marvel-Schebler or Zenith carburetor. What's Included Complete gasket set — Float bowl, throttle body, and mounting flange gaskets Needle & seat assembly — Viton-tipped inlet needle for positive fuel shut-off Welch/core plugs — Replacement expansion plugs for access ports on the carb body Throttle shaft seals — Minimizes vacuum leaks at worn throttle shaft bushings Idle mixture screw with spring — Restores proper idle adjustment and tension Bowl drain gasket — Fiber gasket for the sediment bowl drain plug Mounting hardware — Gaskets for carb-to-manifold and air cleaner connections Compatible Tractor Models Model Years Engine Carb Type Farmall M / MV / MTA 1939-1954 C-248 / C-264 4-cyl Marvel-Schebler TSX Farmall Super M 1952-1954 C-264 4-cyl Marvel-Schebler TSX Farmall 300 / 350 1955-1958 C-169 / C-175 4-cyl Marvel-Schebler TSX Farmall 400 / 450 1955-1958 C-264 / C-281 4-cyl Marvel-Schebler TSX Farmall 460 / 544 1958-1973 C-221 / C-200 4-cyl Zenith / Marvel-Schebler International W9 / WR9 1940-1953 C-335 4-cyl Marvel-Schebler TSX International O6 1945-1953 C-248 4-cyl Marvel-Schebler TSX Why Rebuild Your Farmall Carb? Ethanol damage — Modern E10 fuel degrades original cork and leather gaskets Hard starting — Old needle/seat doesn't seal; fuel drains from bowl after shutdown Rough running — Air leaks around worn throttle shaft seals cause erratic idle Fuel economy — A properly rebuilt carb can improve fuel consumption by 15-25% Preserve originality — Rebuild the original carb rather than replacing with generic aftermarket Frequently Asked Questions Q: Will this fit my 1951 Farmall M?A: Yes. The Farmall M (1939-1954) with the C-248 or C-264 engine uses the Marvel-Schebler TSX carburetor that this kit is designed to service. Q: My tractor has a Zenith carb — will this kit work?A: This kit is primarily designed for the Marvel-Schebler TSX series. Some later Farmall 460/544 tractors used Zenith carbs. Inspect your carb body for the manufacturer name before ordering. Q: Does this kit include a new float?A: This kit focuses on wear items (gaskets, seals, needle/seat). The original brass float is typically reusable unless it has developed a leak. Test by submerging in hot water. Q: How difficult is an M-series carb rebuild?A: The Marvel-Schebler TSX is one of the simplest carbs to rebuild — an excellent project for first-timers. Expect 2-3 hours working at a clean bench. Q: Will this kit work with ethanol-blended gasoline?A: Yes. All gaskets and seals are manufactured from modern Viton and fiber materials designed to resist ethanol-blended fuel (up to E15). Related ProductsBrowse more in our collection. Search by part number

Read more less

Headlight Light Switch for Can-Am Maverick X3 / Defender / Trail / Sport — 710004498 Restore full lighting control to your Can-Am side-by-side with this OEM-spec headlight switch. Designed as a direct replacement for part number 710004498, this switch fits Maverick X3, Defender, Trail, and Sport models. Plug-and-play installation — no splicing, no programming, no dealer visit required. Key Features Exact OEM Replacement: Matches Can-Am part 710004498 specifications — identical fit, form, and function Weather-Sealed Construction: IP65-rated housing protects against mud, water, dust, and pressure washing Positive Detent Action: Crisp, tactile switching between OFF, LOW BEAM, and HIGH BEAM positions — no vague middle positions Plug-and-Play: Uses the factory wiring connector — remove old switch, plug in new, done in 5 minutes UV-Stabilized Materials: Switch housing and button won't fade, crack, or become brittle from sun exposure Compatibility Specification Detail Part Number 710004498 (Replacement) Models Maverick X3, Maverick X3 MAX, Defender, Trail, Sport Years 2017-2024 (Verify with Your Model) Connector Factory Plug — No Splicing Required Symptoms of a Failing Headlight Switch Headlights flicker or cut out intermittently High beams won't engage or stay on Switch feels loose, gritty, or doesn't click into position Lights work sometimes but not consistently Visible damage to the switch housing from rollover or impact Frequently Asked Questions Q: Will this fit my 2021 Can-Am Maverick X3 Turbo?A: Yes, if your X3 uses the 710004498 switch. Check your current switch for the part number or verify with your dealer. Most 2017-2024 X3 models use this switch. Q: Is this plug-and-play or do I need to splice wires?A: Completely plug-and-play. Unplug the factory connector from the old switch, plug it into the new one, snap the switch into the dash, done. Q: My switch works but the lights still don't come on — what else could be wrong?A: If the switch feels normal and clicks properly, the issue may be: blown fuse, bad relay, damaged wiring harness, or failed headlight bulbs. Test the switch with a multimeter to confirm it's working before replacing other components. Q: Is this waterproof enough for mud riding?A: The switch is IP65 rated — protected against water jets and mud. It's designed for the harsh conditions that UTVs encounter. For deep water crossings, consider applying dielectric grease to the connector. 🔗 Explore More from iFJF Find the right part for your vehicle or equipment: Browse All Products Fuel Filters Collection Auto Accessories

Read more less

Product Overview Streamline your Honda K-series engine swap with the iFJF K Series Intake Manifold Coolant Adapter. Whether swapping a K20 or K24 into a Miata, Civic, CRX, or track car, the factory coolant routing at the intake manifold is often a packaging nightmare. This billet aluminum adapter replaces the bulky OEM plastic coolant housing with a compact, durable AN fitting solution that clears tight engine bays and simplifies hose routing for a cleaner, more professional engine bay. Key Features Billet Aluminum Construction: CNC-machined from 6061-T6 aluminum — far stronger and more heat-resistant than the factory plastic housing that becomes brittle and cracks with age. AN Fitting Ready: Compatible with standard AN hose fittings for clean, leak-free coolant line routing. Allows use of braided stainless or push-lock AN hoses for a professional motorsport appearance. Compact Design for Swaps: Significantly smaller footprint than the OEM coolant housing, freeing up critical space in tight engine bays — essential for K-swap Miata, Civic, Integra, and custom chassis builds. Universal K-Series Fitment: Fits all Honda K20 and K24 engines (K20A, K20A2, K20Z1, K20Z3, K24A1, K24A2, K24Z7, etc.) found in RSX, Civic Si, TSX, Accord, CR-V, and Element. Corrosion-Resistant Anodized Finish: Protects against coolant corrosion and oxidation for long-term reliability in daily-driven and track applications. Compatibility Engine Vehicles Notes K20A / K20A2 / K20Z1 2002-2006 Acura RSX / RSX Type-S, 2002-2005 Civic Si (EP3) Direct fit K20Z3 2006-2011 Civic Si (FG2/FA5) Direct fit K24A1 / K24A2 2002-2006 CR-V, 2004-2008 TSX Direct fit K24Z7 2012-2015 Civic Si, 2013-2017 ILX Verify manifold type K24A4 / K24A8 2003-2012 Accord, 2003-2011 Element Direct fit Specifications Spec Detail Material 6061-T6 Billet Aluminum Finish Anodized Fitting Type AN (Adapter sold separately or included per listing) Application K-Series Engine Swap / Race / Street Installation Bolt-On (Reuses OEM Mounting Bolts) Why Choose iFJF Engine swaps are hard enough without fighting coolant leaks from old, brittle plastic housings. iFJF K-series adapters are designed by enthusiasts, for enthusiasts — compact enough for the tightest Miata swap, durable enough for track duty, and priced without the inflated markup. Backed by our 30-day satisfaction guarantee. Frequently Asked Questions Q: Will this work for a K-swap Miata? A: Yes. This adapter is specifically designed with tight engine bays in mind. The compact profile clears the Miata firewall far better than the bulky OEM coolant housing, making it a popular choice for K24 and K20 Miata swap builds. Q: Does this include the AN fittings and hoses? A: This listing is for the billet aluminum adapter housing itself. AN fittings and hoses are sold separately to allow you to choose the exact size and style that fits your build. Most K-swaps use -6AN or -8AN fittings and hose. Q: Is this for the coolant passage on the intake side of the head? A: Yes. This adapter replaces the factory coolant outlet housing located on the intake manifold side of the cylinder head. It is part of the coolant bypass circuit that routes coolant through the intake manifold and throttle body on the factory setup. Q: Do I need to tune after installing this adapter? A: No. This adapter only changes the physical coolant routing — it does not affect airflow, fuel delivery, or ECU parameters. No tune adjustment is required. Q: What gasket do I use with this adapter? A: You can reuse your existing OEM Honda coolant housing gasket, or use a thin layer of high-temperature RTV silicone (such as HondaBond or Permatex Ultra Grey). Ensure both mating surfaces are clean and flat before assembly. Related Products 4-Barrel Carburetor 500 CFM Yamaha Carburetor Rebuild Kit

Read more less

Premium Carburetor Rebuild Kit for Edelbrock Performer & Thunder AVS — Extended Coverage This premium master rebuild kit provides the most extensive model coverage, fitting Edelbrock Performer, Thunder AVS, and many off-road/marine carburetors from model 1405 through 1825. The included bowl cover gasket (specific to AVS and later model carbs) makes this the comprehensive solution for shops and enthusiasts who service multiple Edelbrock models. What's Included Complete primary gasket set — Air horn, main body, base plate gaskets (non-stick coated) Bowl cover gasket — For Thunder AVS and late-model Performer carbs with removable bowl covers Accelerator pump assembly — Both 30cc and 50cc pump cup options included Needle & seat assemblies (2) — Viton tip, matched pair Float bowl gaskets (2) — Precision cut for perfect alignment O-ring and seal kit — Mixture screw O-rings, fuel inlet washers, transfer tube seals Small parts kit — Check balls, pump discharge weight, retainer clips, and springs Extended Model Compatibility Model Range Series Key Models 1405-1411 Performer 1405, 1406, 1407, 1408, 1409, 1410, 1411 1477 Performer 1477 (500 CFM off-road) 1801-1806 Thunder AVS 1801, 1802, 1803, 1804, 1805, 1806 1825-1826 Thunder AVS 1825 (650 CFM), 1826 (800 CFM) Why This Kit is Different Unlike other rebuild kits that only cover basic Performer 1400-series, this kit includes the bowl cover gasket specific to Thunder AVS and late-model Performer carbs. The AVS (Adjustable Vacuum Secondary) carbs have a removable secondary bowl cover requiring an additional gasket not found in standard rebuild kits. Frequently Asked Questions Q: What's the difference vs the 1400-1409 kit?A: This kit adds the bowl cover gasket for Thunder AVS models (1801-1826) and includes both 30cc and 50cc accelerator pump options. Q: Does this fit the Thunder AVS 1806?A: Yes. The Thunder AVS series (1801-1806, 1825-1826) is fully covered, including the bowl cover gasket and correct accelerator pump configuration. Q: Will this fit my 1477 off-road carburetor?A: Yes. The 1477 500 CFM off-road Performer is covered. This carb has unique venting for steep-angle operation. Q: Will modern ethanol-resistant gaskets change the calibration?A: No. Gasket material does not affect calibration. Thickness and port alignment are identical to OEM specifications. Only material has been upgraded for modern fuel compatibility. Related ProductsBrowse more in our collection. Search by part number

Read more less