Search results for "Pool Cleaner Parts"

Overview Stop pool hose stress cracks before they start with the iFJF 2-Pack 1.25 inch Swimming Pool Pipe Holders. These essential accessories provide structural support for suction and return hoses on Intex filtration pump systems eliminating tension and pulling that leads to cracked pool wall connections leaking liners and detached hoses. Each set includes two pipe holders and three clamps — everything needed to protect both sides of your pool plumbing. Compatibility Category Compatible Products Pool Type Intex Above-Ground Pools with 1.25 inch Hose Connections Filter Pumps Intex 1500 GPH 2500 GPH 4000 GPH Filtration Systems Hose Diameter 1.25 Inches (32mm) Standard Intex Hose Verify your hose diameter before ordering. Intex offers both 1.25 inch and 1.5 inch hose connections on different models. Key Features Complete 2-Pack Value: Includes 2 pipe holders — one for suction side and one for return side of filtration system 3 Secure Clamps: Tight-grip plastic clamps prevent hose slippage even under full pump pressure Optimized for 1.25 inch Hoses: Precision-fit for standard Intex 1.25 inch (32mm) pool hoses UV-Resistant Material: High-quality outdoor-grade plastic withstands sun exposure without becoming brittle Stress Relief Design: Reduces tension and pulling at pool wall inlet/outlet connections preventing cracks and liner leaks Tool-Free Installation: Simply mount connect and clamp — no special tools or plumbing expertise required Technical Specifications Specification Value Hose Diameter 1.25 Inches (32mm) Material High-Grade UV-Resistant Plastic Package Quantity 2 Pipe Holders + 3 Plastic Clamps Recommended Pumps Intex 1500 2500 4000 GPH Filter Pumps Installation Tool-Free — Under 15 Minutes Installation Drain Pool Below Connections: Lower water level below inlet and outlet ports or plug from inside Position Holder: Place pipe holder at pool wall interface where hose connects Connect Hose: Attach 1.25 inch Intex hose to pool wall fitting as normal Secure with Clamp: Position clamp over hose and pipe holder junction tighten until snug Repeat: Install second pipe holder on opposite connection suction/return Test: Refill to operating level start pump and check for leaks or hose movement Why Choose iFJF? Factory Direct Supply: iFJF manufactures its own pool replacement parts — no middleman markups Preventative Solution: Much cheaper than replacing cracked pool liner or leaking wall connection from unsupported hoses Bulk Orders Welcome: Need replacements for multiple pools? Contact support@ifjf.net for wholesale pricing Universal Intex Fit: Designed to work with all standard Intex above-ground pool hose connections FAQ Q: Will these work with 1.5 inch Intex hoses?A: No these are specifically designed for 1.25 inch (32mm) hoses. If your Intex system uses 1.5 inch hoses these will not fit properly. Q: How many pipe holders do I need for one pool?A: This 2-pack provides one holder for suction side and one for return side — sufficient for single Intex above-ground pool. Q: Do these work with non-Intex brand filter pumps?A: Designed for Intex hose connection standard. Compatibility with other brands depends on hose diameter and connection type. Q: Can I use for rigid PVC pipe instead of flexible hose?A: Designed for flexible Intex pool hoses. Not suitable for rigid PVC pipe installations. Q: Will the plastic crack in cold weather?A: UV-resistant plastic is formulated for outdoor temperature ranges. For winter store holders indoors for maximum longevity. Q: Is professional installation required?A: No designed for simple DIY installation. No plumbing experience or special tools needed.

Read more less

Product Overview The iFJF Pool Pipe Holder is a durable replacement part designed specifically for Intex and compatible above ground swimming pools. Engineered to securely hold your pool's suction and return hoses in place, this holder prevents stress on the pool wall connections — a common source of cracks, leaks, and costly repairs. Manufactured from high-quality, UV-resistant plastic, this pipe holder withstands prolonged sun exposure, pool chemicals, and temperature fluctuations without degrading. Installation is quick and tool-free — simply attach to the 1.25-inch pool wall port and secure your hoses with the included clamps. Key Features UV-Resistant Construction — High-grade plastic formulation resists sun damage, cracking, and fading from prolonged outdoor exposure Universal 1.25-Inch Fitment — Compatible with Intex and most above ground pool brands using standard 1.25-inch hose connections Includes 2 Hose Clamps — Stainless steel worm-gear clamps provide a secure, leak-free connection between hoses and pool wall ports Prevents Pool Wall Stress — Supports hose weight to eliminate tension on pool liner connections, the #1 cause of wall cracks Tool-Free Installation — Simple hand-tighten installation; no special tools or pool draining required Chemical-Resistant — Withstands chlorine, bromine, salt water, and standard pool treatment chemicals without degradation Multi-Pump Compatible — Works with 1500, 2500, and 4000 GPH filtration pump systems Year-Round Durability — Designed to remain installed through winterization and summer operation cycles Compatibility & Fitment This pool pipe holder is engineered for the following applications: Vehicle Years Engine Intex Important: Always verify fitment for your specific year, make, model, submodel, and engine configuration before purchasing. Contact iFJF support if you need assistance confirming compatibility. Technical Specifications Specification Detail Connection Size 1.25 Inches (Standard) Material UV-Resistant High-Density Plastic Color White / Light Gray Clamp Material Stainless Steel Clamp Quantity 2 Included Compatible Pump Flow Rates 1500 / 2500 / 4000 GPH Installation Method Tool-Free Hand Tighten Why Choose iFJF iFJF is a factory-direct manufacturer of performance and replacement automotive/powersports parts. When you buy from iFJF, you get: Factory-Direct Pricing — No middlemen, no retail markup. You pay a competitive price for premium-quality components. Rigorous Quality Control — Every product undergoes multi-point inspection including dimensional verification, weld integrity testing, and surface finish evaluation before shipping. Premium Materials Only — We exclusively use T-304 stainless steel, 6061 aluminum, and industrial-grade polymers — never cost-cut with inferior materials. US-Based Customer Support — Our support team is based in the United States and responds within 24 hours to all inquiries. Satisfaction Guarantee — If you're not completely satisfied with your purchase, we'll make it right. Contact us for returns, exchanges, or fitment assistance. Fast, Free Shipping — Orders ship from our US warehouses within 1-2 business days with free standard shipping on all orders. Frequently Asked Questions Q: Will this fit my Intex pool?A: This pipe holder is designed for Intex and compatible above ground pools with standard 1.25-inch hose connections. It works with 1500, 2500, and 4000 GPH pump systems. Q: How do I install the pipe holder?A: Installation is tool-free. Simply attach the holder to the 1.25-inch pool wall port, insert your suction and return hoses, and secure them with the included hose clamps. Full instructions are included. Q: Will this prevent hose leaks?A: Yes. By supporting the weight of the hoses at the pool wall connection point, this holder eliminates the tension and stress that commonly causes cracks, leaks, and connection failures at the pool wall. Q: Can I leave this installed during winter?A: Yes. The UV-resistant, weather-resistant plastic is designed for year-round outdoor exposure. However, we recommend disconnecting hoses and draining the system as part of your normal winterization procedure. Q: Is this compatible with salt water pools?A: Yes. The materials used are resistant to salt water, chlorine, and all common pool chemicals. Rinse with fresh water periodically for best results. 📚 Related Guides & Articles iFJF Product Buying Guide — How to Choose the Right Part Diesel vs. Gas Engines: Complete Maintenance Guide 📖 Related Guide: Read our complete installation guide and comparison →

Read more less

Product Overview Direct replacement cover cap for Hayward CL200 and CL220 series automatic chlorine and bromine chemical feeders. Manufactured from UV-stabilized, chemical-resistant polymer that withstands continuous exposure to chlorine, bromine, and muriatic acid without cracking, fading, or degrading. Precision-matched thread profile ensures a leak-free seal with CL200/CL220 feeder bodies every time. Key Features Chemical-Resistant Polymer — UV-stabilized, chemical-resistant material withstands chlorine, bromine, and acid without degradation or cracking. Precision Thread Fit — CNC-matched thread profile ensures leak-free seal on CL200/CL220 feeder bodies — no leaks or cross-threading. UV-Stabilized Design — Resists sun damage and discoloration from outdoor equipment pad exposure season after season. Tool-Free Installation — Ergonomic grip allows secure hand-tightening without any tools. O-ring groove for positive seal every time. Universal Hayward Fit — Compatible with CL200 (chlorine) and CL220 (bromine) feeders in both inline and offline configurations. Compatibility Make Model Year Range Notes Hayward CL200 Series All Years Chlorine Feeder — Inline & Offline Hayward CL220 Series All Years Bromine Feeder — Inline & Offline Hayward CL200A / CL220A All Variants Direct Fit — No Modifications Specifications Specification Value Material UV-Stabilized Chemical-Resistant Polymer Color Black Replaces Part# CLX200C, CLX200CAP Installation Hand-Tighten (No Tools Required) Why Choose iFJF Over time, chemical exposure causes original caps to crack, warp, or lose their seal — leading to chlorine gas leaks. Our replacement cap restores proper seal and extends feeder life without the cost of a full unit replacement. Frequently Asked Questions Q: Will this fit my Hayward feeder?A: Fits all Hayward CL200 and CL220 series feeders. Contact us with your model number if unsure. Q: Do I need tools to install?A: No. Hand-tighten until snug. Ensure the O-ring is seated properly before threading on. Q: Is this OEM Hayward?A: High-quality aftermarket replacement manufactured to meet OEM CLX200C specs — same fit at better value. Q: Will chlorine damage this cap?A: No. The chemical-resistant, UV-stabilized polymer is formulated for continuous chlorine and bromine exposure. Q: How often should I replace it?A: Inspect each pool season. Replace if cracked, warped, or losing seal. Typical life: 3–5 seasons. Q: What if my old cap is stuck?A: Turn off pump and relieve pressure. Use a strap wrench — never metal tools. Apply silicone lube to threads. Related Products Complete your pool maintenance: CCX1000V Pool Filter Cartridge for Hayward filters, Pressure Gauge for monitoring, and O-Ring & Gasket Kit for complete feeder seal replacement.

Read more less

Restore your engine's performance with the Carburetor Repair Rebuild Kit For 4 Stroke Atv Taotao Roketa Znen Jonway Bms. This comprehensive carburetor rebuild kit includes all necessary gaskets, seals, O-rings, and precision components to bring your carburetor back to factory specifications. Whether you're experiencing hard starts, rough idle, or poor fuel economy, this kit provides everything needed for a complete overhaul — eliminating the need to replace the entire carburetor assembly. Key Features & Benefits Complete Master Kit: Includes all gaskets, O-rings, seals, needle valve, float components, and jets required for a thorough rebuild OEM-Spec Materials: Manufactured with fuel-resistant materials that withstand ethanol-blended fuels and modern fuel additives Restored Performance: Eliminates hard starting, rough idle, hesitation, and flooding issues caused by worn carburetor components Direct Fit: Precision-engineered for exact fitment — no modifications required Cost-Effective Repair: Rebuild instead of replace — save hundreds compared to buying a new carburetor assembly Compatibility & Specifications Specification Details Part Number FJ-CRRK77 Price $25.99 Brand iFJF Direct Condition New Why Choose iFJF Direct? Quality Assurance: Every product undergoes rigorous inspection before shipping to ensure you receive a flawless component Expert Support: Our US-based support team has deep knowledge of diesel engines, powersports, and pool equipment — we're here to help with fitment questions Fast Free Shipping: Orders ship from our US warehouse within 1 business day with free standard shipping on all domestic orders 30-Day Returns: Not satisfied? Return within 30 days for a full refund. We stand behind every product we sell Ready to get your equipment back in top shape? Order the Carburetor Repair Rebuild Kit For 4 Stroke Atv Taotao Roketa Znen Jonway Bms today and enjoy fast shipping, expert support, and the quality assurance that thousands of mechanics and DIY enthusiasts trust. Related Products Carburetor Cleaner & Tools — Complete your rebuild with professional-grade carburetor cleaning supplies Fuel System Parts — Browse our full selection of fuel filters, lines, and pumps Frequently Asked Questions Q: Will this carburetor rebuild kit fit my engine? A: This rebuild kit is designed for specific carburetor models. Please verify your carburetor part number matches the applications listed in the product description. Common compatible engines are listed in the title. If you're unsure, contact our support team with your engine model and carburetor number for verification. Q: Do I need special tools to rebuild my carburetor? A: Basic hand tools (screwdrivers, pliers, socket set) are typically sufficient. We recommend having a clean workspace, carburetor cleaner spray, and compressed air for cleaning passages. A service manual for your specific carburetor model is helpful but not required — the included components are straightforward to install. Q: What warranty does this product come with? A: All iFJF Direct products are backed by a 30-day satisfaction guarantee. If you're not completely satisfied, return the product for a full refund. We also offer a 90-day warranty against manufacturing defects. Our US-based customer support team is available to assist with any issues. Q: How fast will I receive my order? A: Orders ship from our US warehouse within 1 business day. Standard shipping typically delivers within 3-7 business days to the continental US. Expedited shipping options are available at checkout. You'll receive a tracking number as soon as your order ships. Q: What if this part doesn't fit my vehicle/equipment? A: If the part doesn't fit, we'll make it right. Contact our support team within 30 days for a prepaid return label and full refund. We recommend verifying your vehicle/equipment model, year, and part numbers before ordering to ensure compatibility. Our team is happy to help with fitment questions before you buy.

Read more less

Carburetor Repair Kit for Johnson Evinrude Outboard — GLM 40570 Compatible The iFJF 18-7046 carburetor repair kit is a complete rebuild solution for select Johnson and Evinrude outboard carburetors. Replaces GLM 40570, OEM 439076, 398526, 390055, 435443, 392550, 434888, 383906, and Mallory 9-37100. This kit contains all gaskets, seals, inlet needle & seat, and welch plugs required to restore your carburetor to factory-spec fuel metering — eliminating hard starts, rough idle, and fuel leaks. Key Features Multi-Brand Compatibility: Replaces GLM, OMC/Johnson/Evinrude OEM, and Mallory part numbers — broad cross-reference coverage. Ethanol-Ready Materials: Gaskets and seals formulated to resist ethanol-blended fuel degradation — lasts longer than original cork/rubber components. Complete Component Set: Every soft component required for a full rebuild included: bowl gasket, needle & seat, body gaskets, o-rings, welch plugs. Precision Manufactured: Inlet needle & seat machined to exact tolerances for consistent float height control and leak-free operation. DIY Friendly: Clear component layout makes it easy to identify and replace each part during the rebuild process. Cross-Reference / Interchange Brand Part Number GLM Marine 40570 Johnson / Evinrude OEM 439076, 398526, 390055 Johnson / Evinrude (Alt) 435443, 392550, 434888, 383906 Mallory Marine 9-37100 Sierra Marine 18-7046 Why Choose the iFJF 18-7046 Kit? Vintage Johnson and Evinrude outboards are legendary for their reliability — but their carburetors suffer from the same ethanol-related degradation as any other marine engine. OEM carburetor assemblies for these engines are often discontinued or priced at $300+. The iFJF 18-7046 kit provides an affordable, high-quality alternative that restores factory performance without the factory price tag. Frequently Asked Questions Q: What Johnson/Evinrude models does this fit?A: This kit covers multiple OMC/Johnson/Evinrude carburetor applications. Verify fitment by your carburetor's OEM part number (439076, 398526, 390055, 435443, 392550, 434888, or 383906). Contact us with your engine model and serial number for confirmation. Q: Is this the same quality as GLM 40570?A: The iFJF 18-7046 kit is manufactured to the same specifications as the GLM 40570 kit — using ethanol-resistant materials and precision-machined components. It is a direct functional equivalent. Q: Does the kit include float and jets?A: No. The float and jets are typically reusable. The kit includes all soft components that wear out: gaskets, seals, o-rings, needle & seat, and welch plugs. Q: Will this fix fuel leaking from my carburetor?A: If the leak is from the float bowl gasket (common) or inlet needle not sealing properly (also common), then yes — this kit includes both components. If the carburetor body is cracked, the leak requires carburetor replacement. Q: How many kits do I need for a V4 outboard?A: V4 Johnson/Evinrude outboards typically have 2 carburetors. You'll need 2 kits for a complete rebuild. Ordering 2 kits is recommended so both carburetors perform identically. Related Blog Posts Marine Fuel Water Separator Guide: Why Your Outboard Needs One Best Water Separator Fuel Filter for Marine Engines

Read more less

Product Overview The 842877 Carburetor Rebuild Kit is a premium-quality aftermarket carburetor rebuild kit designed for Various Briggs & Stratton 303400, 295342, 295346, 295347, and more with the Horizontal Shaft Single Cylinder engine. Precision-engineered to meet or exceed OEM specifications, this carburetor rebuild kit delivers reliable performance, exact fitment, and long-lasting durability at a fraction of the dealership price. Whether you're performing routine maintenance, restoring a classic, or upgrading your vehicle's performance, this iFJF replacement part is manufactured using high-grade materials and undergoes rigorous quality control to ensure trouble-free installation and dependable operation. Key Features Precision Manufacturing — CNC-machined to exact OEM tolerances for perfect carburetor-to-manifold sealing, eliminating vacuum leaks and rough idle Premium Rubber Compound — Made from high-grade nitrile rubber that resists ethanol, fuel vapors, and heat degradation — far more durable than generic boot kits Complete Set (4 Boots) — Includes all intake manifold boots needed for a full carburetor bank replacement, saving you time and ensuring uniform sealing Direct OEM Replacement — Drop-in fit for Honda CB series motorcycles — no modifications, trimming, or adapter plates required Heat & Vibration Resistant — Engineered to withstand the extreme heat cycling and constant vibration of motorcycle engines without cracking or hardening Easy Installation — Replace all four boots in under an hour with basic hand tools — detailed instructions included Compatibility This carburetor rebuild kit is designed to fit the following vehicles: Make Model Year Range Engine Briggs & Stratton 303400 Various Horizontal Shaft Single Cylinder Briggs & Stratton 295342 Various Horizontal Shaft Single Cylinder Briggs & Stratton 295346 Various Horizontal Shaft Single Cylinder Briggs & Stratton 295347 Various Horizontal Shaft Single Cylinder Briggs & Stratton 297440 Various Horizontal Shaft Single Cylinder Briggs & Stratton 297447 Various Horizontal Shaft Single Cylinder Briggs & Stratton 303437 Various Horizontal Shaft Single Cylinder Briggs & Stratton 303442 Various Horizontal Shaft Single Cylinder Briggs & Stratton 303445 Various Horizontal Shaft Single Cylinder Briggs & Stratton 303446 Various Horizontal Shaft Single Cylinder ⚠️ Please verify your specific year, model, and engine configuration before ordering. Contact us if you're unsure about fitment. Specifications Specification Detail Part Number 842877 Carburetor Rebuild Kit Brand iFJF OE/OEM Part Numbers 842877 Vehicle Make Briggs & Stratton Year Range Various Engine Horizontal Shaft Single Cylinder Category Carburetor Rebuild Kit Warranty 1-Year Limited Warranty Why Choose iFJF? At iFJF Direct, we specialize in providing hard-to-find aftermarket parts for diesel trucks, motorcycles, marine applications, and more. Every carburetor rebuild kit we sell is: Quality Tested — Each unit is inspected before shipping to ensure perfect fitment and function Factory Direct Pricing — Skip the middleman markup and save 30-60% vs OEM dealer prices Fast Shipping — Orders ship within 1-2 business days from our US warehouses Expert Support — Our team knows Briggs & Stratton vehicles inside and out — contact us with any fitment questions Frequently Asked Questions Q: Will this carburetor rebuild kit fit my Briggs & Stratton? A: This carburetor rebuild kit is designed for Various Briggs & Stratton 303400, 295342, 295346 with the Horizontal Shaft Single Cylinder engine. Please check the compatibility table above and verify your specific model year and engine code before ordering. If your vehicle falls outside these specifications, it may not fit. Contact our support team with your VIN for confirmation. Q: How difficult is the installation? A: Installation difficulty is moderate. Most DIY mechanics can complete this in 1-2 hours with basic hand tools (socket set, screwdrivers). You'll need to remove the carburetor assembly to access the boots. We recommend replacing all four boots at once for even sealing. Apply a light coat of silicone spray to the inner surface of the boots for easier carburetor installation. Q: How does this compare to the OEM part? A: This iFJF carburetor rebuild kit is manufactured to meet or exceed OEM specifications in materials, tolerances, and performance. You're getting OEM-equivalent quality at a fraction of the dealership price. All iFJF products undergo multi-point QC inspection before shipping. Q: What warranty comes with this product? A: All iFJF products include a 1-year limited warranty against manufacturing defects. If you experience any issues with fitment or function, contact our support team with your order number for a replacement or refund. Q: How fast is shipping? A: Orders ship from our US warehouse within 1-2 business days. Standard delivery takes 3-7 business days depending on your location. Expedited shipping options are available at checkout. Q: How do I know if my intake boots need replacement? A: Common signs include: rough idle, hanging RPMs, backfiring through the carbs, vacuum leaks (hissing sound), cracked or hardened rubber, and difficulty tuning the carburetors. If your boots are original and over 10 years old, they're almost certainly due for replacement. Rubber hardens and cracks over time, causing air leaks that make proper carburetor tuning impossible. Q: Should I replace anything else while I'm in there? A: Since you'll have the carburetors removed, we recommend also inspecting/replacing: carburetor gaskets, fuel lines, vacuum hoses, and air filter. If your carburetors haven't been cleaned/synced recently, this is the perfect time. Doing everything at once saves significant labor down the road. Ready to Order? Click Add to Cart to get your 842877 Carburetor Rebuild Kit shipped today. Have questions about fitment? Contact our support team — we respond within 24 hours. Related Products Check out more Briggs & Stratton parts and carburetor & intake products from iFJF Direct: Shop All Carburetor & Intake — Browse our complete carburetor & intake selection All Briggs & Stratton Parts — View all compatible Briggs & Stratton products Helpful Resources iFJF Blog — Installation Guides & Maintenance Tips

Read more less

Product Overview Protect your Ford F150 engine from harmful oil vapor and carbon buildup with this premium billet aluminum oil catch can, designed for the 2011-2020 Ford F150 with 5.0L V8, 2.7L EcoBoost (2015-2020), and 3.5L EcoBoost (2011-2020) engines. Direct-injected EcoBoost engines are especially prone to intake valve carbon deposits because fuel never washes the valves. This catch can intercepts oil vapor from the PCV system before it reaches your intake manifold — keeping your valves, intercooler, and combustion chambers cleaner and your engine running stronger for longer. Key Features Billet 6061-T6 Aluminum: CNC-machined from solid aircraft-grade aluminum for maximum strength, leak resistance, and heat dissipation. 3-Ounce Capacity: Generous reservoir holds up to 3 ounces of captured oil — check and drain every 1,000-3,000 miles depending on driving conditions. Stainless Steel Internal Filter: Multi-layer stainless mesh effectively traps fine oil vapors while allowing crankcase gases to pass through. Easy Drain System: Bottom-mounted drain valve with knurled knob allows quick, mess-free draining without removing the can. Heat Sink Base: Machined fins at the bottom of the can promote cooling and improve oil-air separation efficiency. Universal Bracket: Includes adjustable mounting bracket and hardware for flexible installation in your engine bay. Compatibility Year Make Model Engine 2011-2020 Ford F-150 5.0L Coyote V8 2015-2020 Ford F-150 2.7L EcoBoost V6 2011-2020 Ford F-150 3.5L EcoBoost V6 Specifications Specification Value Body Material 6061-T6 Billet Aluminum Filter Material Stainless Steel Mesh Capacity 3.0 ounces (90ml) Drain Type Bottom valve, knurled knob Installation Guide Locate your F150's PCV hose — typically running from the valve cover to the intake manifold or turbo inlet Choose a mounting location for the catch can — near the firewall or on the inner fender, away from extreme heat sources Mount the bracket and secure the catch can Cut the PCV hose and attach the catch can inlet and outlet hoses using provided fittings and hose clamps Ensure the flow direction is correct: IN from the PCV valve → catch can → OUT to intake Double-check all connections and start the engine to verify no vacuum leaks Check the catch can after 500 miles of driving to gauge oil accumulation rate Why Choose iFJF iFJF Direct provides practical engine protection solutions at prices that make sense. This catch can is manufactured to the same standards as brands costing twice as much — because we believe every truck owner should be able to protect their engine investment. Fast US shipping, responsive support, and a hassle-free return policy back every purchase. Related Products Ford 7.3L Powerstroke Fuel Filter — Keep your diesel running clean Ford 6.7L Powerstroke Fuel Water Separator — Diesel filtration Ford 6.7L Powerstroke 4" Intake — Performance cold air intake Frequently Asked Questions Q: Will this catch can fit my 2018 F-150 with the 3.5L EcoBoost?A: Yes, this catch can is designed for 2011-2020 F-150 models with the 3.5L EcoBoost, including the second-generation engine introduced in 2017. Q: How often do I need to empty the catch can?A: Check every 1,000 miles initially to establish a baseline. Most F-150 owners find they accumulate 1-2 ounces every 2,000-3,000 miles. More frequent draining is needed in cold weather when condensation increases. Q: Will installing a catch can void my factory warranty?A: Under the Magnuson-Moss Warranty Act, a manufacturer must prove that an aftermarket part caused a failure to deny warranty coverage. A properly installed catch can typically does not affect warranty. Q: Is this really necessary for the EcoBoost engine?A: Yes. Direct-injected EcoBoost engines have no fuel wash on the intake valves, making them particularly susceptible to carbon buildup. A catch can is one of the most cost-effective preventative maintenance items you can install. Q: Can I install this myself?A: Yes, installation is straightforward for anyone comfortable with basic hand tools and under-hood work. Typical install time is 30-60 minutes. No cutting of factory hoses is required if using the provided replacement hose sections. Q: Does this catch can work with the 5.0L Coyote V8?A: Yes, the 5.0L Coyote also uses direct injection (2018+) and port injection (2011-2017). Both benefit from reduced oil vapor in the intake tract.

Read more less

Product Overview The 5184294AE oil filter adapter housing (also known as the oil cooler/filter housing assembly) is a critical engine component on the 3.6L Pentastar V6 engine used across Chrysler, Dodge, and Jeep vehicles from 2011-2013. The factory plastic housing is a well-known failure point — it develops hairline cracks from heat cycling, causing oil leaks that drip onto the exhaust manifold and create a burning oil smell. This complete assembly includes the housing with integrated oil pressure and temperature sensors, gaskets, and seals for a direct, leak-free replacement. Fix the Pentastar oil leak once — permanently. Key Features Complete Housing Assembly — Includes the oil filter adapter housing, integrated sensors (oil pressure and oil temperature), gaskets, and O-ring seals. No component reuse required. Engineered for the Pentastar 3.6L V6 — Designed specifically for the 2011-2013 3.6L Pentastar engine (engine code ERB). Direct replacement for OEM part 5184294AE. Replaces Multiple Part Numbers — Compatible replacement for 5184294AE, 5184294AD, and 5184294AC — covers all revisions of this housing across the 2011-2013 model years. Stops Burning Oil Smell — The #1 symptom of a cracked housing is oil leaking onto the hot exhaust manifold below, producing a noticeable burning oil odor — especially at idle or after parking. Wide Vehicle Coverage — Fits Chrysler 200, 300, Town & Country; Dodge Avenger, Challenger, Charger, Durango, Grand Caravan, Journey; Jeep Grand Cherokee, Wrangler; Ram C/V; and Volkswagen Routan. Compatibility / Fitment Make Model Engine Years Chrysler 200 3.6L V6 2011-2013 Chrysler 300 3.6L V6 2011-2013 Chrysler Town & Country 3.6L V6 2011-2013 Dodge Avenger 3.6L V6 2011-2013 Dodge Challenger 3.6L V6 2011-2013 Dodge Charger 3.6L V6 2011-2013 Dodge Durango 3.6L V6 2011-2013 Dodge Grand Caravan 3.6L V6 2011-2013 Dodge Journey 3.6L V6 2011-2013 Jeep Grand Cherokee 3.6L V6 2011-2013 Jeep Wrangler (JK) 3.6L V6 2012-2013 Ram C/V (Cargo Van) 3.6L V6 2012-2013 Volkswagen Routan 3.6L V6 2011-2013 Technical Specifications Specification Value Part Number 5184294AE (5184294AD, 5184294AC) Component Type Oil Filter Adapter Housing (Oil Cooler Assembly) Engine 3.6L Pentastar V6 (ERB) Includes Sensors Yes — Oil Pressure + Oil Temperature Includes Gaskets Yes — Complete Seal Kit Material Engineered Polymer / Aluminum (Design-Specific) Why Choose This The Pentastar 3.6L V6 is one of the most widely used engines in Chrysler/Dodge/Jeep vehicles — and its oil filter housing is one of its most common failure points. The OEM housing (especially 2011-2013 models) develops cracks at the gasket surface from heat cycling, allowing oil to leak onto the exhaust manifold. This not only produces a burning smell but can accelerate to a significant leak if ignored. Replacing the housing with this complete assembly — including fresh sensors and seals — is the definitive fix. The cost is a fraction of what dealers charge for the same job. Related Products John Deere Steering Gear Set GX21924BLE — Lawn tractor repair Browse all Engine Parts — Filters, housings, and engine components Shop All iFJF Parts — Complete inventory Frequently Asked Questions Q: Do I need to replace the sensors if mine still work?A: This housing assembly comes with new sensors pre-installed. While you can transfer old sensors, the internal O-rings that seal them are a secondary leak path. Using the new sensors with fresh seals ensures a leak-free result. The labor to redo leaking sensor O-rings is the same as the initial job. Q: How do I know if my oil filter housing is cracked?A: Key symptoms: burning oil smell from the engine bay (especially at idle or after shutting off), visible oil pooling in the valley of the engine under the intake manifold, oil dripping onto the exhaust manifold or catalytic converter, and low oil level between changes without visible ground drips. Q: What tools do I need for this replacement?A: Basic socket set, torque wrench, flathead screwdriver (for hose clamps), and a clean work area. The housing is located under the intake manifold — removal of the upper and lower intake manifolds is required. Budget 3-5 hours for DIY installation. Q: Is this the updated design or the original?A: This replacement is manufactured to the latest 5184294AE specification, which incorporates design improvements over the earlier 5184294AC and 5184294AD versions that were more prone to cracking. All mounting points and connections are identical to the original. Q: Do I need to replace the intake manifold gaskets?A: Yes — the intake manifolds must be removed to access the oil filter housing. Intake manifold gasket sets are sold separately and should always be replaced when the manifolds are removed. Reusing old gaskets risks vacuum leaks. Q: Can I drive with a leaking oil filter housing?A: Short distances at low speed may be acceptable, but it's not recommended. Oil leaking onto hot exhaust components is a fire hazard. Additionally, the leak can worsen suddenly, leading to rapid oil loss and potential engine damage. Repair as soon as possible. Q: Does this fit the 2014+ Pentastar engines?A: This specific housing is for 2011-2013 model years. 2014+ Pentastar engines use a revised housing design. Check your vehicle's exact year before ordering. Order with Confidence Fast shipping from our US warehouse. Dedicated customer support team ready to answer your questions. Click Add to Cart to get your order started today. Related Guides & Articles Check out these helpful resources from the iFJF blog: Diesel Fuel Filters — Diesel Fuel Filter Replacement: Complete Guide Fuel Filter Guide — Diesel Fuel Filter Maintenance — When to Replace Fuel Filter Housing — Top 5 Diesel Fuel Filter Housing Problems & Fixes

Read more less

Product Overview Carburetor 2BBL For Weber 32/36 DGV DGEV Carb Nissan Mazda Toyota Pickup 20R 22R — a high-performance aftermarket replacement engineered for precision fitment and lasting durability. Factory pre-set and flow-tested before shipment, this aftermarket carburetor delivers consistent fuel metering, reliable cold starts, and smooth idle. Die-cast aluminum construction with gasket kit included. Compatibility Vehicle Years Engine Nissan/Datsun Models See product title for specific years See product title Please verify fitment with your specific model year and engine code. Key Features Factory pre-set and flow-tested Die-cast aluminum with corrosion-resistant finish Includes gaskets and mounting hardware Direct bolt-on replacement Improved throttle response and smooth idle Specifications Specification Value Material Die-Cast Aluminum Type Gasoline Carburetor Includes Carburetor, Gaskets, Hardware Installation Guide Disconnect battery and allow engine to cool Remove factory component and clean mounting surfaces Install new gaskets and position the replacement part Torque fasteners to specification in an even pattern Reconnect all connections and check for proper operation Start engine and check for leaks or issues Re-torque after first heat cycle (if applicable) Professional installation recommended. Estimated time: 1-4 hours depending on application. Frequently Asked Questions Q: Is this a direct bolt-on replacement?A: Yes, designed as a direct replacement for the factory component using existing mounting points. No modifications required for standard applications.Q: What is included in the package?A: The kit includes everything needed for installation — the main component, gaskets, mounting hardware, and any required accessories as shown in the product images.Q: Is professional installation required?A: Professional installation is recommended for best results. Some applications may require basic to intermediate mechanical skills and standard hand tools.Q: What warranty is included?A: All iFJF products come with a 3-month hassle-free return and money-back guarantee. If you have any issues, contact our support team.Q: How do I verify fitment for my specific vehicle?A: Check the compatibility information in the product listing, compare your engine code and model year, and contact our support team if you need assistance.Q: Is this carburetor pre-adjusted?A: Yes, factory pre-set and flow-tested. Minor idle speed adjustment may be needed based on your specific application and altitude. Why Choose iFJF? Quality Assurance — Every product is inspected and tested before shipment Complete Kits — All necessary hardware included — no extra parts to buy Expert Support — Our team is available to help with fitment and installation questions 3-Month Warranty — Hassle-free returns and money-back guarantee on all iFJF products Related Products Chevy SBC V8 Exhaust Header (1967-1987) Oil/Air Separator Catch Can for F150 Ford 7.3L Powerstroke Fuel Filter FD-4595

Read more less

24 853 43-S Carburetor — Direct Replacement for Kohler Command Engines Get your Kohler-powered equipment running like new with this factory-spec replacement carburetor for Kohler Command CH20, CH22, and CH640 engines. Pre-calibrated and ready to install, this carburetor replaces Kohler part numbers 24 853 43-S, 24 853 255-S, and 24 853 50-S. Includes mounting gasket. Key Features Direct OEM Replacement — Engineered to factory specifications for Kohler Command PRO engines Pre-Calibrated — Baseline adjustments set at the factory for quick, hassle-free installation Complete Assembly — Includes throttle/choke linkages, fuel solenoid, and all vacuum ports New Gasket Included — Comes with mounting gasket for a proper seal Wide Compatibility — Fits Kohler-powered Cub Cadet, John Deere, Toro, and other equipment Compatible Models & Part Numbers Kohler Engine Replaces OEM # CH20, CH22, CH640 24 853 43-S CV18S, CV20S, CV22S, CV725 24 853 255-S, 24 853 50-S Command PRO Series 24 053 50-S, 2485332-S, 2485335-S Aftermarket Cross-Ref KL-3135, KL-110, KL-3100 FAQ Q: Will this fit my Cub Cadet with a Kohler CH20?A: Yes. This carburetor is a direct replacement for all Kohler Command CH20, CH22, and CH640 engines commonly found in Cub Cadet, John Deere, and Toro equipment. Q: Is the fuel solenoid included?A: Yes, the anti-afterfire fuel shut-off solenoid is pre-installed on the carburetor. Q: Do I need to adjust anything after installation?A: The carburetor comes pre-calibrated. You may need minor idle speed adjustment (target 1500-1750 RPM no-load for most applications). Q: What causes a Kohler carburetor to fail?A: The most common issues are ethanol-blended fuel causing varnish buildup in jets and passages, and deteriorated gaskets. Use ethanol-free fuel or fuel stabilizer to extend carburetor life. Q: Rebuild or replace?A: For carburetors with significant internal corrosion or warped bodies, replacement is more reliable than rebuilding. For minor varnish buildup, a rebuild kit may suffice. Why Choose iFJF? Our replacement carburetors are manufactured to strict ISO 9001 quality standards. US-based warehouse and support. Related Products Shop All Carburetors → Fuel Filters & Parts →

Read more less

Heavy-Duty 1/4" Fuel Filter Kit for Larger Displacement Engines This premium fuel filter kit is purpose-built for ATVs, lawn tractors, and equipment with engines over 2.0L displacement. Featuring the high-flow 691035 magnetic filter with 3/16" fuel line and secure clamps, this kit delivers the filtration capacity larger engines demand. Key Features High-Flow Design for 2.0L+ Engines: Engineered for larger displacement ATVs, lawn tractors, and non-fuel-injected vehicles requiring higher fuel volume. Dual-Stage Magnetic Filtration: Paper element traps debris while the built-in magnet captures microscopic metal particles for comprehensive fuel cleaning. Complete Service Kit: Includes 1/4" 691035 fuel filter, 3/16" ID premium fuel line hose (395051R), and 791850 clamps. Ethanol-Resistant Materials: Fuel line and filter components are rated for modern ethanol-blended fuels, resisting degradation and swelling. Quick DIY Installation: Pre-cut fuel line and simple clamp connections — install in under 20 minutes with basic hand tools. Compatibility Equipment Type Engine Size Fuel Line Size Large ATVs / UTVs Over 2.0L 1/4" Garden Tractors / Zero-Turns Over 2.0L 1/4" Generators (large portable) Over 2.0L 1/4" Non-Fuel-Injected Vehicles Over 2.0L 1/4" Small Farm Equipment Over 2.0L 1/4" Specifications Specification Value Filter Type High-flow inline magnetic fuel filter Filter Fitting Size 1/4" (6.35mm) Fuel Line ID 3/16" (4.76mm) Replaces Part # Briggs & Stratton 691035 Fuel Line Part # 395051R (heavy-duty) Clamp Part # 791850 Application Gasoline engines over 2.0L Why Choose iFJF Direct? Our heavy-duty fuel filter kits are built for the demands of larger engines. We use premium ethanol-resistant materials and OEM-spec filtration media. Every kit is backed by our satisfaction guarantee — if it doesn't fit or perform, we'll make it right. Frequently Asked Questions Q: What size engines does this kit fit?A: This kit is designed for larger displacement engines over 2.0L in ATVs, lawn mowers, and non-fuel-injected vehicles. For smaller engines, see our standard kit (SKU FJ-CRRK15).Q: What's the difference between this and the standard kit?A: This heavy-duty kit includes a higher-flow 691035 filter optimized for engines over 2.0L, with premium fuel line hose rated for higher fuel volume. The standard kit is designed for engines under 2.0L.Q: What's included in the kit?A: One 1/4" 691035 magnetic fuel filter, 3/16" inner diameter 395051R fuel line hose, and 791850 clamps — everything needed for a complete fuel line service.Q: How does the magnetic filtration help?A: The built-in magnet traps microscopic metal particles from tank corrosion and fuel system wear that paper-only filters miss. This dual-stage approach provides superior engine protection.Q: How often should I replace the fuel filter?A: We recommend replacement every 100 hours of operation or annually. Equipment used in dusty environments or with older fuel storage should be serviced more frequently. Upgrade your fuel system today with professional-grade filtration. Free shipping on orders $50+. Related Blog Posts Small Engine Fuel System Maintenance Guide Related Products Complete your setup with these related items: 1/4" Fuel Filter Kit for Small Displacement Engines

Read more less

Product Overview The 16213-425-000 / 16214-425-000 is a premium-quality aftermarket carburetor intake manifold boots designed for 1969-1982 Honda CB750, CB750F, CB750C, CB750K, and more with the 736cc SOHC I4 engine. Precision-engineered to meet or exceed OEM specifications, this carburetor intake manifold boots delivers reliable performance, exact fitment, and long-lasting durability at a fraction of the dealership price. Whether you're performing routine maintenance, restoring a classic, or upgrading your vehicle's performance, this iFJF replacement part is manufactured using high-grade materials and undergoes rigorous quality control to ensure trouble-free installation and dependable operation. Key Features Precision Manufacturing — CNC-machined to exact OEM tolerances for perfect carburetor-to-manifold sealing, eliminating vacuum leaks and rough idle Premium Rubber Compound — Made from high-grade nitrile rubber that resists ethanol, fuel vapors, and heat degradation — far more durable than generic boot kits Complete Set (4 Boots) — Includes all intake manifold boots needed for a full carburetor bank replacement, saving you time and ensuring uniform sealing Direct OEM Replacement — Drop-in fit for Honda CB series motorcycles — no modifications, trimming, or adapter plates required Heat & Vibration Resistant — Engineered to withstand the extreme heat cycling and constant vibration of motorcycle engines without cracking or hardening Easy Installation — Replace all four boots in under an hour with basic hand tools — detailed instructions included Compatibility This carburetor intake manifold boots is designed to fit the following vehicles: Make Model Year Range Engine Honda CB750 1969-1982 736cc SOHC I4 Honda CB750F 1969-1982 736cc SOHC I4 Honda CB750C 1969-1982 736cc SOHC I4 Honda CB750K 1969-1982 736cc SOHC I4 Honda CB750L 1969-1982 736cc SOHC I4 Honda CB750SC 1969-1982 736cc SOHC I4 ⚠️ Please verify your specific year, model, and engine configuration before ordering. Contact us if you're unsure about fitment. Specifications Specification Detail Part Number 16213-425-000 / 16214-425-000 Brand iFJF OE/OEM Part Numbers 16213-425-000, 16214-425-000 Vehicle Make Honda Year Range 1969-1982 Engine 736cc SOHC I4 Category Carburetor Intake Manifold Boots Warranty 1-Year Limited Warranty Why Choose iFJF? At iFJF Direct, we specialize in providing hard-to-find aftermarket parts for diesel trucks, motorcycles, marine applications, and more. Every carburetor intake manifold boots we sell is: Quality Tested — Each unit is inspected before shipping to ensure perfect fitment and function Factory Direct Pricing — Skip the middleman markup and save 30-60% vs OEM dealer prices Fast Shipping — Orders ship within 1-2 business days from our US warehouses Expert Support — Our team knows Honda vehicles inside and out — contact us with any fitment questions Frequently Asked Questions Q: Will this carburetor intake manifold boots fit my Honda? A: This carburetor intake manifold boots is designed for 1969-1982 Honda CB750, CB750F, CB750C with the 736cc SOHC I4 engine. Please check the compatibility table above and verify your specific model year and engine code before ordering. If your vehicle falls outside these specifications, it may not fit. Contact our support team with your VIN for confirmation. Q: How difficult is the installation? A: Installation difficulty is moderate. Most DIY mechanics can complete this in 1-2 hours with basic hand tools (socket set, screwdrivers). You'll need to remove the carburetor assembly to access the boots. We recommend replacing all four boots at once for even sealing. Apply a light coat of silicone spray to the inner surface of the boots for easier carburetor installation. Q: How does this compare to the OEM part? A: This iFJF carburetor intake manifold boots is manufactured to meet or exceed OEM specifications in materials, tolerances, and performance. You're getting OEM-equivalent quality at a fraction of the dealership price. All iFJF products undergo multi-point QC inspection before shipping. Q: What warranty comes with this product? A: All iFJF products include a 1-year limited warranty against manufacturing defects. If you experience any issues with fitment or function, contact our support team with your order number for a replacement or refund. Q: How fast is shipping? A: Orders ship from our US warehouse within 1-2 business days. Standard delivery takes 3-7 business days depending on your location. Expedited shipping options are available at checkout. Q: How do I know if my intake boots need replacement? A: Common signs include: rough idle, hanging RPMs, backfiring through the carbs, vacuum leaks (hissing sound), cracked or hardened rubber, and difficulty tuning the carburetors. If your boots are original and over 10 years old, they're almost certainly due for replacement. Rubber hardens and cracks over time, causing air leaks that make proper carburetor tuning impossible. Q: Should I replace anything else while I'm in there? A: Since you'll have the carburetors removed, we recommend also inspecting/replacing: carburetor gaskets, fuel lines, vacuum hoses, and air filter. If your carburetors haven't been cleaned/synced recently, this is the perfect time. Doing everything at once saves significant labor down the road. Ready to Order? Click Add to Cart to get your 16213-425-000 / 16214-425-000 shipped today. Have questions about fitment? Contact our support team — we respond within 24 hours. Related Products Check out more Honda parts and carburetor & intake products from iFJF Direct: Shop All Carburetor & Intake — Browse our complete carburetor & intake selection All Honda Parts — View all compatible Honda products Helpful Resources iFJF Blog — Installation Guides & Maintenance Tips

Read more less