Search results for "oil filter replacement"

Product Overview Upgrade your vehicle's front-end performance with this premium suspension kit. Engineered as a direct-fit replacement, this kit restores factory ride quality, steering precision, and handling. Whether you're refreshing a high-mileage daily driver or rebuilding after wear, these control arms and components deliver OE-grade performance at a fraction of dealership pricing. Each component is manufactured to strict quality standards with precision-machined ball joints, high-durometer rubber bushings, and corrosion-resistant coatings. The result is a suspension system that handles just like factory — smooth, quiet, and predictable through every corner and over every bump. Key Features OE-Spec Fitment: Designed to match factory geometry and mounting points — no modifications, drilling, or fabrication required. Simple bolt-on installation. Precision Ball Joints: Hardened steel ball studs with polished bearing surfaces and grease-retaining boots for long service life and smooth articulation. High-Durometer Rubber Bushings: Engineered to absorb road vibration while maintaining precise suspension geometry under load. Corrosion-Resistant Finish: E-coat or powder-coated surfaces protect against rust, road salt, and environmental wear for years of reliable service. Complete Kit: All necessary components included — control arms, ball joints, bushings, and hardware where applicable. No need to piece together individual parts. Pre-Assembled: Ball joints and bushings are pre-installed and pre-greased for faster installation and immediate road readiness. Fitment & Compatibility Year Range Make Model Notes 2001-2007 Mercedes-Benz C230/C280/C350 (W203) Sedan & Coupe 2003-2009 Mercedes-Benz CLK320/CLK350 (W209) Coupe 2003-2009 Mercedes-Benz E350 (W211) Sedan 2005-2011 Mercedes-Benz SLK300 (R171) Roadster Always verify fitment with your VIN before ordering. Contact our support team for compatibility confirmation. Technical Specifications Specification Detail Part Type Control Arm & Suspension Kit Material Forged Steel / Stamped Steel (varies by position) Ball Joint Type Pre-installed, sealed, pre-greased Bushing Material High-durometer SBR rubber Finish E-Coat / Powder Coat (black) Installation Bolt-on, direct replacement Warranty 1-Year Limited Warranty Why Choose iFJF Control Arms? Dealership replacement parts can cost 3-5x more for the same performance. Our suspension components are sourced from ISO/TS 16949 certified manufacturers — the same supply chain that produces OE parts for major automakers. You get factory-quality parts without the factory price tag. Every control arm kit undergoes dimensional verification and ball joint articulation testing before packaging. We stand behind every product with a 1-year warranty and lifetime technical support. If it doesn't fit or perform, we'll make it right. Frequently Asked Questions Q: Will these control arms fit my vehicle?A: Check the compatibility table above. These parts are designed for the specific years, makes, and models listed. If your vehicle falls outside these ranges, please contact us with your VIN for verification before ordering. Q: Do I need an alignment after installing control arms?A: Yes — absolutely. Replacing control arms changes suspension geometry and toe settings. A professional wheel alignment is required immediately after installation to prevent uneven tire wear and ensure proper handling. Budget approximately $80-120 for this service. Q: Can I install these myself or do I need a mechanic?A: Experienced DIYers with proper tools can install control arms in 2-4 hours per side. You'll need a floor jack, jack stands, torque wrench, ball joint separator, and basic hand tools. If you're not comfortable with suspension work, we recommend professional installation (typically 2-3 hours labor per side). Q: How do I know if my control arms need replacement?A: Common signs include: clunking noises over bumps, steering wheel vibration, uneven tire wear, wandering steering, and visible bushing cracks. If your vehicle has over 80,000 miles on original suspension components, preventive replacement is recommended. Q: Are ball joints pre-installed and greased?A: Yes. All control arms come with ball joints pre-installed and pre-greased from the factory. They are ready to bolt on and drive — no additional assembly required. Q: What's the difference between this kit and individual OEM parts?A: Our complete kit includes all the components you'd typically buy separately at the dealership — control arms, ball joints, and bushings — in one package at a significantly lower total cost. Individual OEM parts can easily exceed $500+ per side; our kit provides comparable quality for 40-60% less. Q: How long do aftermarket control arms typically last?A: With proper installation and alignment, expect 60,000-100,000+ miles of service life. Lifespan depends on driving conditions — rough roads, potholes, and off-road use accelerate wear. Regular inspection every 30,000 miles is recommended. Q: Do you offer warranty on control arm kits?A: Yes — all iFJF control arm kits include a 1-year limited warranty against manufacturing defects. If you experience any quality issues, contact our support team for a replacement or refund. Related Products Explore more from our collections: Control Arms & Suspension — complete front-end parts Auto Parts & Accessories — thousands of quality replacement parts Contact Us — have a fitment question? We're here to help Ready to Restore Your Suspension? Don't let worn control arms compromise your safety and driving experience. Order today and enjoy smooth, confident handling again. Fast Shipping • 1-Year Warranty • Lifetime Support

Read more less

Headlight Light Switch for Can-Am Maverick X3 / Defender / Trail / Sport — 710004498 Restore full lighting control to your Can-Am side-by-side with this OEM-spec headlight switch. Designed as a direct replacement for part number 710004498, this switch fits Maverick X3, Defender, Trail, and Sport models. Plug-and-play installation — no splicing, no programming, no dealer visit required. Key Features Exact OEM Replacement: Matches Can-Am part 710004498 specifications — identical fit, form, and function Weather-Sealed Construction: IP65-rated housing protects against mud, water, dust, and pressure washing Positive Detent Action: Crisp, tactile switching between OFF, LOW BEAM, and HIGH BEAM positions — no vague middle positions Plug-and-Play: Uses the factory wiring connector — remove old switch, plug in new, done in 5 minutes UV-Stabilized Materials: Switch housing and button won't fade, crack, or become brittle from sun exposure Compatibility Specification Detail Part Number 710004498 (Replacement) Models Maverick X3, Maverick X3 MAX, Defender, Trail, Sport Years 2017-2024 (Verify with Your Model) Connector Factory Plug — No Splicing Required Symptoms of a Failing Headlight Switch Headlights flicker or cut out intermittently High beams won't engage or stay on Switch feels loose, gritty, or doesn't click into position Lights work sometimes but not consistently Visible damage to the switch housing from rollover or impact Frequently Asked Questions Q: Will this fit my 2021 Can-Am Maverick X3 Turbo?A: Yes, if your X3 uses the 710004498 switch. Check your current switch for the part number or verify with your dealer. Most 2017-2024 X3 models use this switch. Q: Is this plug-and-play or do I need to splice wires?A: Completely plug-and-play. Unplug the factory connector from the old switch, plug it into the new one, snap the switch into the dash, done. Q: My switch works but the lights still don't come on — what else could be wrong?A: If the switch feels normal and clicks properly, the issue may be: blown fuse, bad relay, damaged wiring harness, or failed headlight bulbs. Test the switch with a multimeter to confirm it's working before replacing other components. Q: Is this waterproof enough for mud riding?A: The switch is IP65 rated — protected against water jets and mud. It's designed for the harsh conditions that UTVs encounter. For deep water crossings, consider applying dielectric grease to the connector. 🔗 Explore More from iFJF Find the right part for your vehicle or equipment: Browse All Products Fuel Filters Collection Auto Accessories

Read more less

Product Overview The iFJF LED Light is a premium aftermarket replacement part delivering OEM-equivalent performance at a competitive price.. Key Takeaways ✅ Direct Replacement for OEM part numbers: AP6047972, PS12070396, 11043011, 10866538 ✅ Quality: Premium aftermarket — meets/exceeds OEM specifications ✅ Installation: Direct bolt-on replacement — no modifications needed ✅ Value: Significant savings vs. OEM dealer pricing ✅ Warranty: Satisfaction guaranteed — replacement or refund Compatibility & Fitment Please verify fitment with your vehicle before ordering. Contact us with your VIN for confirmation. Make Model Year Range Engine Notes Universal fit — verify dimensions match your application. Contact us with measurements for confirmation. Key Features & Benefits Precision Engineering: Manufactured to exact OEM tolerances for guaranteed fit and function — no modifications, no guesswork. High-Quality Materials: Constructed from premium-grade materials with corrosion-resistant finish for long service life in demanding conditions. OEM-Equivalent Performance: Designed to match or exceed factory specifications — reliable operation you can count on mile after mile. Easy Installation: Direct bolt-on replacement. Most installations completed in under an hour with basic hand tools. Cost-Effective Solution: Premium quality at a fraction of OEM dealer pricing — save 40-70% vs. dealership parts counter. Quality Tested: Every unit undergoes rigorous quality control inspection before packaging and shipment. Corrosion Resistant: Protective coating prevents rust and oxidation, extending service life even in harsh environments. Technical Specifications Specification Detail Product Type LED Light Brand iFJF Condition New — Aftermarket Replaces OEM AP6047972, PS12070396, 11043011, 10866538, 6047972 Fitment Type Direct Replacement / Bolt-On Material High-Grade Steel / Aluminum / Composite (varies by application) Finish Corrosion-Resistant Coating Package Contents 1x LED Light Assembly (mounting hardware included where applicable) Warranty Satisfaction Guarantee — Replacement or Refund Installation Guide Verify Compatibility: Confirm this led light matches your vehicle year, make, model, and engine using the compatibility table above. Gather Tools: Typical tools needed — socket set, wrenches, torque wrench, screwdrivers, safety glasses, and gloves. Safety First: Park on level ground, engage parking brake, disconnect battery if working near electrical components. Remove Old Part: Carefully remove the old/damaged component. Note orientation and fastener locations. Clean & Inspect: Clean the mounting surface thoroughly. Inspect surrounding components for wear or damage. Install New LED Light: Position the new iFJF led light and secure all fasteners hand-tight first, then torque to specification. Final Check: Double-check all connections and clearances. Test operation before returning vehicle to service. ⚠️ Professional installation is recommended for safety-critical components. Always consult your vehicle service manual for proper torque specifications. Why Choose iFJF? iFJF Direct is your trusted source for premium aftermarket automotive, RV, marine, and appliance replacement parts. We combine OEM-quality engineering with competitive pricing — no compromises. ✓ Quality You Can Trust: Every product undergoes thorough inspection before shipment ✓ Fast Shipping: Orders ship within 1-2 business days from our US warehouse ✓ Expert Support: Our product specialists are ready to help with fitment questions ✓ Satisfaction Guaranteed: Easy returns and exchanges — shop with confidence Frequently Asked Questions ❓ Does this replace OEM part numbers AP6047972, PS12070396, 11043011? Yes. This iFJF led light is a direct aftermarket replacement for AP6047972, PS12070396, 11043011. It meets or exceeds OEM specifications for quality and performance. ❓ Is this an OEM or aftermarket part? This is a premium aftermarket led light manufactured by iFJF. It is engineered to match or exceed OEM specifications, providing reliable performance at a fraction of dealer pricing. ❓ Is professional installation required? Installation difficulty varies by vehicle. Many DIY enthusiasts can install this led light with basic hand tools. We recommend consulting your vehicle's service manual for torque specifications and installation procedures. Professional installation is advised if you're not comfortable with automotive repair. ❓ What warranty is included? All iFJF products come with a satisfaction guarantee. If you experience any defects or issues, contact our customer service team for a replacement or full refund. We stand behind every product we sell. ❓ How fast is shipping? Orders are processed within 1-2 business days. Standard shipping to the contiguous United States takes 3-7 business days. Expedited shipping options are available at checkout for faster delivery. ❓ What's included in the package? Each package includes the LED Light as shown in the product images. All necessary components for installation are included. Please refer to the product images for exact contents. ❓ What is your return policy? We accept returns within 30 days of delivery. Items must be in new, unused condition with original packaging. Contact our support team to initiate a return — we make it easy and hassle-free. Related Products Complete your repair with these related products from iFJF: 🔗 iFJF W10515058 Main LED Light Driver Designed for W10465957,W10522611, 🔗 iFJF W10843353 W10695459 W11205083 Refrigerator LED Light Board Replac Helpful Resources 📖 iFJF Blog — Installation Guides, Maintenance Tips & Product Spotlights 🔧 How to Choose the Right Aftermarket Replacement Parts 📦 Contact Our Support Team for Fitment Questions

Read more less

Product Overview The iFJF Turn Signal Kit is a premium aftermarket replacement part delivering OEM-equivalent performance at a competitive price. Engineered for Arctic Cat Can-Am Kawasaki Commander Pioneer RZR. Key Takeaways ✅ Vehicle Fitment: Arctic Cat/Can-Am/Kawasaki/Polaris Commander Pioneer RZR ✅ Quality: Premium aftermarket — meets/exceeds OEM specifications ✅ Installation: Direct bolt-on replacement — no modifications needed ✅ Value: Significant savings vs. OEM dealer pricing ✅ Warranty: Satisfaction guaranteed — replacement or refund Compatibility & Fitment Please verify fitment with your vehicle before ordering. Contact us with your VIN for confirmation. Make Model Year Range Engine Notes Arctic Cat Commander - - Direct Fit Can-Am Pioneer - - Verify submodel Kawasaki RZR - - Verify submodel Polaris Teryx - - Verify submodel Key Features & Benefits Precision Engineering: Manufactured to exact OEM tolerances for guaranteed fit and function — no modifications, no guesswork. High-Quality Materials: Constructed from premium-grade materials with corrosion-resistant finish for long service life in demanding conditions. OEM-Equivalent Performance: Designed to match or exceed factory specifications — reliable operation you can count on mile after mile. Easy Installation: Direct bolt-on replacement. Most installations completed in under an hour with basic hand tools. Cost-Effective Solution: Premium quality at a fraction of OEM dealer pricing — save 40-70% vs. dealership parts counter. Quality Tested: Every unit undergoes rigorous quality control inspection before packaging and shipment. Corrosion Resistant: Protective coating prevents rust and oxidation, extending service life even in harsh environments. Technical Specifications Specification Detail Product Type Turn Signal Kit Brand iFJF Condition New — Aftermarket Compatible Makes Arctic Cat, Can-Am, Kawasaki, Polaris Fitment Type Direct Replacement / Bolt-On Material High-Grade Steel / Aluminum / Composite (varies by application) Finish Corrosion-Resistant Coating Package Contents 1x Turn Signal Kit Assembly (mounting hardware included where applicable) Warranty Satisfaction Guarantee — Replacement or Refund Installation Guide Verify Compatibility: Confirm this turn signal kit matches your vehicle year, make, model, and engine using the compatibility table above. Gather Tools: Typical tools needed — socket set, wrenches, torque wrench, screwdrivers, safety glasses, and gloves. Safety First: Park on level ground, engage parking brake, disconnect battery if working near electrical components. Remove Old Part: Carefully remove the old/damaged component. Note orientation and fastener locations. Clean & Inspect: Clean the mounting surface thoroughly. Inspect surrounding components for wear or damage. Install New Turn Signal Kit: Position the new iFJF turn signal kit and secure all fasteners hand-tight first, then torque to specification. Final Check: Double-check all connections and clearances. Test operation before returning vehicle to service. ⚠️ Professional installation is recommended for safety-critical components. Always consult your vehicle service manual for proper torque specifications. Why Choose iFJF? iFJF Direct is your trusted source for premium aftermarket automotive, RV, marine, and appliance replacement parts. We combine OEM-quality engineering with competitive pricing — no compromises. ✓ Quality You Can Trust: Every product undergoes thorough inspection before shipment ✓ Fast Shipping: Orders ship within 1-2 business days from our US warehouse ✓ Expert Support: Our product specialists are ready to help with fitment questions ✓ Satisfaction Guaranteed: Easy returns and exchanges — shop with confidence Frequently Asked Questions ❓ Will this turn signal kit fit my vehicle? This turn signal kit is designed for Arctic Cat/Can-Am/Kawasaki Commander Pioneer RZR. Please verify your vehicle's exact year, make, model, and engine against our compatibility table above before ordering. ❓ Is this an OEM or aftermarket part? This is a premium aftermarket turn signal kit manufactured by iFJF. It is engineered to match or exceed OEM specifications, providing reliable performance at a fraction of dealer pricing. ❓ Is professional installation required? Installation difficulty varies by vehicle. Many DIY enthusiasts can install this turn signal kit with basic hand tools. We recommend consulting your vehicle's service manual for torque specifications and installation procedures. Professional installation is advised if you're not comfortable with automotive repair. ❓ What warranty is included? All iFJF products come with a satisfaction guarantee. If you experience any defects or issues, contact our customer service team for a replacement or full refund. We stand behind every product we sell. ❓ How fast is shipping? Orders are processed within 1-2 business days. Standard shipping to the contiguous United States takes 3-7 business days. Expedited shipping options are available at checkout for faster delivery. ❓ What's included in the package? Each package includes the Turn Signal Kit as shown in the product images. All necessary components for installation are included. Please refer to the product images for exact contents. ❓ What is your return policy? We accept returns within 30 days of delivery. Items must be in new, unused condition with original packaging. Contact our support team to initiate a return — we make it easy and hassle-free. Related Products Complete your repair with these related products from iFJF: Browse our complete product catalog for more quality replacement parts. Helpful Resources 📖 iFJF Blog — Installation Guides, Maintenance Tips & Product Spotlights 🔧 How to Choose the Right Aftermarket Replacement Parts 📦 Contact Our Support Team for Fitment Questions

Read more less

Manual Shifter Stop — Eliminate 1st/2nd Gear Slop in Your Subaru WRX The iFJF Red Anodized Manual Shifter Stop is a must-have upgrade for every 2015-2021 Subaru WRX owner. Factory shifter assemblies have excessive side-to-side play in the 1-2 gate, creating a vague, rubbery feel that undermines the precision of your manual transmission. This CNC-machined billet aluminum stop eliminates that slop completely for crisp, rifle-bolt shift action. Key Features Eliminates 1st/2nd Gear Slop — The single most effective shifter upgrade for the VA-chassis WRX. Transforms vague factory shifting into precise, mechanical engagement. CNC Billet 6061-T6 Aluminum — Precision machined from aerospace-grade aluminum for exact dimensional tolerance and long-term durability. Red Anodized Finish — Hard anodized coating resists scratching, fading, and corrosion while adding a subtle performance look under the shift boot. 10-Minute Installation — No transmission work required. Simply remove the shift boot trim, bolt the stop in place using factory hardware, and adjust for perfect alignment. Compatible with Short Shifters — Works with OEM Subaru short shifter, Cobb, Boomba, Kartboy, and other aftermarket short-throw kits. Compatibility Make Model Years Subaru WRX (VA Chassis) 2015-2021 Subaru Legacy / Outback 2010-2014 Subaru Forester 2014 Only compatible with 6-speed manual transmissions. Does NOT fit CVT (automatic) models. Specifications Material 6061-T6 Billet Aluminum Finish Red Hard Anodized Manufacturing CNC Precision Machined Installation Time 10-15 Minutes Tools Required 10mm Socket, Flathead Screwdriver, Trim Tool Installation Overview Pull up on the shift boot surround to release the retaining clips. Remove the factory rubber shift boot cover to expose the shifter assembly. Locate the 1st/2nd gear side stop — it's on the driver's side of the shifter base. Remove the factory plastic stop (two 10mm bolts). Install the iFJF billet stop in the same position. Snug the bolts but leave them slightly loose for adjustment. Shift into 1st gear. Slide the stop until it gently contacts the shifter lever, then back it off 0.5mm. Tighten bolts to 8-10 ft-lbs. Test 1st and 2nd gear engagement before reinstalling the boot and trim. Frequently Asked Questions Will this fix my notchy 2nd gear? The shifter stop eliminates side-to-side play, which improves the overall feel and precision of the 1-2 shift gate. However, if your 2nd gear is grinding or popping out, you may have a synchro issue — the stop won't fix internal transmission problems. Does this work with the factory short-throw shifter? Yes — the iFJF Shifter Stop is fully compatible with the Subaru OEM short-throw shifter (STI Performance Package or dealer-installed option) as well as popular aftermarket short shifters from Cobb, Boomba, and Kartboy. Will this void my warranty? This is an external bolt-on part that doesn't modify the transmission or shifter linkage. It should not affect your warranty coverage, though dealers may vary in their interpretation. Remove before dealer visits if you're concerned. Is the red finish the only color option? This listing is for the Red Anodized version. The anodizing is Type II hard coat — it won't fade or chip under normal use inside the shift boot area. How does this compare to a full short shifter? A short shifter reduces throw distance (how far the lever moves). The shifter stop reduces side-to-side slop (how much the lever wiggles in gear). They address different aspects of shift feel — many enthusiasts run both for the ultimate setup.

Read more less

Product Overview Get your Norcold RV refrigerator working again with the iFJF 621991001 Refrigerator Power Board Kit. This replacement control board is the brain of your RV absorption refrigerator, managing power between 120V AC and LP gas operation. Designed for Norcold N611, N811, N610, and N810 series models with serial numbers below 9056491, this board restores all control functions including temperature settings, mode selection, and diagnostic capabilities. When the power board fails, your refrigerator may not turn on at all, won't switch between AC and gas, displays error codes, or runs but doesn't cool. Rather than replacing an expensive RV refrigerator, this affordable board replacement gets you back on the road. Key Features Direct Replacement: Designed for Norcold N611, N811, N610, N810 series (serial # below 9056491) Dual Power Control: Manages both 120V AC electric and LP gas operation Built-In Diagnostics: Compatible with Norcold's diagnostic system for easy troubleshooting Plug-and-Play: Uses the same connectors and mounting points as the original board Quality Electronics: Industrial-grade PCB with protective coating for RV environment durability 📋 Compatibility Compatible Models (Serial # Below 9056491) Norcold N611 Series Norcold N811 Series Norcold N610 Series Norcold N810 Series 📐 Specifications Specification Value Part Number 621991001 Type 2-Way Power Control Board (AC/Gas) Compatible Models N611, N811, N610, N810 (SN < 9056491) Input Voltage 120V AC / 12V DC ❓ Frequently Asked Questions Q: How do I check my serial number?A: The serial number is on a label inside the refrigerator, typically on the side wall or near the door frame. This board fits models with serial numbers BELOW 9056491. Q: What are symptoms of a bad power board?A: Refrigerator won't turn on, won't switch between AC and gas mode, error codes on display, clicking but no ignition on gas mode, or display lights but no cooling. Q: Is this a plug-and-play replacement?A: Yes. The board uses the same connectors as the original — remove the old board, plug in the new one, and secure with the original mounting screws. Q: Do I need to disconnect both AC and DC power?A: Yes. Disconnect shore power AND the RV battery before replacing the board. The control board uses both 120V AC and 12V DC power. Q: Will this fix error code 'no co' (no cooling)?A: Possibly. The 'no co' code can be caused by a faulty power board. However, it can also indicate burner, thermocouple, or cooling unit issues. Start with the board as it's the most common and affordable fix.

Read more less

Product Overview Upgrade your vehicle's front-end performance with this premium suspension kit. Engineered as a direct-fit replacement, this kit restores factory ride quality, steering precision, and handling. Whether you're refreshing a high-mileage daily driver or rebuilding after wear, these control arms and components deliver OE-grade performance at a fraction of dealership pricing. Each component is manufactured to strict quality standards with precision-machined ball joints, high-durometer rubber bushings, and corrosion-resistant coatings. The result is a suspension system that handles just like factory — smooth, quiet, and predictable through every corner and over every bump. Key Features OE-Spec Fitment: Designed to match factory geometry and mounting points — no modifications, drilling, or fabrication required. Simple bolt-on installation. Precision Ball Joints: Hardened steel ball studs with polished bearing surfaces and grease-retaining boots for long service life and smooth articulation. High-Durometer Rubber Bushings: Engineered to absorb road vibration while maintaining precise suspension geometry under load. Corrosion-Resistant Finish: E-coat or powder-coated surfaces protect against rust, road salt, and environmental wear for years of reliable service. Complete Kit: All necessary components included — control arms, ball joints, bushings, and hardware where applicable. No need to piece together individual parts. Pre-Assembled: Ball joints and bushings are pre-installed and pre-greased for faster installation and immediate road readiness. Fitment & Compatibility Year Range Make Model Notes 2005-2013 BMW 325xi/328xi/330xi/335xi E90/E91/E92 xDrive AWD Always verify fitment with your VIN before ordering. Contact our support team for compatibility confirmation. Technical Specifications Specification Detail Part Type Control Arm & Suspension Kit Material Forged Steel / Stamped Steel (varies by position) Ball Joint Type Pre-installed, sealed, pre-greased Bushing Material High-durometer SBR rubber Finish E-Coat / Powder Coat (black) Installation Bolt-on, direct replacement Warranty 1-Year Limited Warranty Why Choose iFJF Control Arms? Dealership replacement parts can cost 3-5x more for the same performance. Our suspension components are sourced from ISO/TS 16949 certified manufacturers — the same supply chain that produces OE parts for major automakers. You get factory-quality parts without the factory price tag. Every control arm kit undergoes dimensional verification and ball joint articulation testing before packaging. We stand behind every product with a 1-year warranty and lifetime technical support. If it doesn't fit or perform, we'll make it right. Frequently Asked Questions Q: Will these control arms fit my vehicle?A: Check the compatibility table above. These parts are designed for the specific years, makes, and models listed. If your vehicle falls outside these ranges, please contact us with your VIN for verification before ordering. Q: Do I need an alignment after installing control arms?A: Yes — absolutely. Replacing control arms changes suspension geometry and toe settings. A professional wheel alignment is required immediately after installation to prevent uneven tire wear and ensure proper handling. Budget approximately $80-120 for this service. Q: Can I install these myself or do I need a mechanic?A: Experienced DIYers with proper tools can install control arms in 2-4 hours per side. You'll need a floor jack, jack stands, torque wrench, ball joint separator, and basic hand tools. If you're not comfortable with suspension work, we recommend professional installation (typically 2-3 hours labor per side). Q: How do I know if my control arms need replacement?A: Common signs include: clunking noises over bumps, steering wheel vibration, uneven tire wear, wandering steering, and visible bushing cracks. If your vehicle has over 80,000 miles on original suspension components, preventive replacement is recommended. Q: Are ball joints pre-installed and greased?A: Yes. All control arms come with ball joints pre-installed and pre-greased from the factory. They are ready to bolt on and drive — no additional assembly required. Q: What's the difference between this kit and individual OEM parts?A: Our complete kit includes all the components you'd typically buy separately at the dealership — control arms, ball joints, and bushings — in one package at a significantly lower total cost. Individual OEM parts can easily exceed $500+ per side; our kit provides comparable quality for 40-60% less. Q: How long do aftermarket control arms typically last?A: With proper installation and alignment, expect 60,000-100,000+ miles of service life. Lifespan depends on driving conditions — rough roads, potholes, and off-road use accelerate wear. Regular inspection every 30,000 miles is recommended. Q: Do you offer warranty on control arm kits?A: Yes — all iFJF control arm kits include a 1-year limited warranty against manufacturing defects. If you experience any quality issues, contact our support team for a replacement or refund. Related Products Explore more from our collections: Control Arms & Suspension — complete front-end parts Auto Parts & Accessories — thousands of quality replacement parts Contact Us — have a fitment question? We're here to help Ready to Restore Your Suspension? Don't let worn control arms compromise your safety and driving experience. Order today and enjoy smooth, confident handling again. Fast Shipping • 1-Year Warranty • Lifetime Support

Read more less

EZGO Front Wheel Hub Assembly — 19932G1 Replacement (2-Pack) The iFJF 19932G1 front wheel hub assembly is a precision-engineered direct replacement for EZGO golf carts manufactured from 1979 through 2001.5. These heavy-duty hubs restore smooth steering and eliminate bearing noise on older fleet and personal carts. Each hub comes with bearing races pre-installed for a straightforward bolt-on installation. Key Features Complete Assembly: Bearing races pre-installed — no press work required 2-Pack Kit: Includes driver and passenger side hubs for complete front-end service Forged Steel: Heavy-duty construction with rust-resistant black coating Exact OEM Fit: Precision CNC-machined to EZGO 19932G1 specifications Gas & Electric Compatible: Works on both engine types Lug Studs Installed: 4-lug pattern, ready to mount Compatibility Vehicle Year Range Engine Type EZGO Marathon 1979–1994 Gas & Electric EZGO Medalist 1994–1999 Gas & Electric EZGO TXT (DCS) 1995–2001.5 Gas & Electric ⚠️ NOT compatible with 2001.5 and newer EZGO models — use part number 70895G01 for those. Specifications Specification Value Part Number 19932G1 Bolt Pattern 4 x 4" (4 x 101.6mm) Lug Stud Size 1/2"-20 Bearing Type Tapered roller (pre-installed) Material Forged steel Quantity 2 hubs (left + right) Finish Black corrosion-resistant coating Why Replace Your Wheel Hubs? Worn front hubs on older EZGO carts are a leading cause of steering vibration, uneven tire wear, and bearing failure. Telltale signs you need replacement: Humming or grinding noise from front wheels during operation Steering wheel vibration, especially at higher speeds Uneven tire wear on front tires Noticeable wheel play when rocking at 12 and 6 o'clock Grease leaking from bearing area Installation Guide Bolt-on replacement — no bearing press needed. Typical install time: 30–45 minutes per side. Jack up front end, secure with jack stands Remove front wheel (4 lug nuts) Remove cotter pin, castle nut, washer from spindle Slide off old hub assembly Clean spindle, apply fresh bearing grease Slide new 19932G1 hub onto spindle Install washer and castle nut, torque to specification Install new cotter pin, remount wheel Frequently Asked Questions Q: How do I know if I need 19932G1 or 70895G01? A: If your EZGO is 2001.5 or newer, you need 70895G01. If it's 1979 through early 2001, you need 19932G1. Check the serial number plate under the glove box. Q: Are the bearings included? A: Yes, each hub comes with tapered roller bearing races pre-installed — no press required. Q: Will this fit my 1998 EZGO TXT electric? A: Yes! The 19932G1 fits 1995–2001.5 TXT models including DCS electric carts. Q: Do you recommend replacing both sides? A: Absolutely. Replacing both front hubs at the same time ensures even wear and consistent handling. Q: Are inner seals included? A: Inner bearing seals are not included. We recommend replacing worn seals at the same time for best results. Related Products & Resources Shop More Golf Cart Parts Browse our full selection at unbeatable prices. View All Golf Cart Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts

Read more less

Product Overview Upgrade your vehicle's front-end performance with this premium suspension kit. Engineered as a direct-fit replacement, this kit restores factory ride quality, steering precision, and handling. Whether you're refreshing a high-mileage daily driver or rebuilding after wear, these control arms and components deliver OE-grade performance at a fraction of dealership pricing. Each component is manufactured to strict quality standards with precision-machined ball joints, high-durometer rubber bushings, and corrosion-resistant coatings. The result is a suspension system that handles just like factory — smooth, quiet, and predictable through every corner and over every bump. Key Features OE-Spec Fitment: Designed to match factory geometry and mounting points — no modifications, drilling, or fabrication required. Simple bolt-on installation. Precision Ball Joints: Hardened steel ball studs with polished bearing surfaces and grease-retaining boots for long service life and smooth articulation. High-Durometer Rubber Bushings: Engineered to absorb road vibration while maintaining precise suspension geometry under load. Corrosion-Resistant Finish: E-coat or powder-coated surfaces protect against rust, road salt, and environmental wear for years of reliable service. Complete Kit: All necessary components included — control arms, ball joints, bushings, and hardware where applicable. No need to piece together individual parts. Pre-Assembled: Ball joints and bushings are pre-installed and pre-greased for faster installation and immediate road readiness. Fitment & Compatibility Year Range Make Model Notes 2005-2013 BMW 325i/328i/330i/335i E90/E91/E92 3 Series Always verify fitment with your VIN before ordering. Contact our support team for compatibility confirmation. Technical Specifications Specification Detail Part Type Control Arm & Suspension Kit Material Forged Steel / Stamped Steel (varies by position) Ball Joint Type Pre-installed, sealed, pre-greased Bushing Material High-durometer SBR rubber Finish E-Coat / Powder Coat (black) Installation Bolt-on, direct replacement Warranty 1-Year Limited Warranty Why Choose iFJF Control Arms? Dealership replacement parts can cost 3-5x more for the same performance. Our suspension components are sourced from ISO/TS 16949 certified manufacturers — the same supply chain that produces OE parts for major automakers. You get factory-quality parts without the factory price tag. Every control arm kit undergoes dimensional verification and ball joint articulation testing before packaging. We stand behind every product with a 1-year warranty and lifetime technical support. If it doesn't fit or perform, we'll make it right. Frequently Asked Questions Q: Will these control arms fit my vehicle?A: Check the compatibility table above. These parts are designed for the specific years, makes, and models listed. If your vehicle falls outside these ranges, please contact us with your VIN for verification before ordering. Q: Do I need an alignment after installing control arms?A: Yes — absolutely. Replacing control arms changes suspension geometry and toe settings. A professional wheel alignment is required immediately after installation to prevent uneven tire wear and ensure proper handling. Budget approximately $80-120 for this service. Q: Can I install these myself or do I need a mechanic?A: Experienced DIYers with proper tools can install control arms in 2-4 hours per side. You'll need a floor jack, jack stands, torque wrench, ball joint separator, and basic hand tools. If you're not comfortable with suspension work, we recommend professional installation (typically 2-3 hours labor per side). Q: How do I know if my control arms need replacement?A: Common signs include: clunking noises over bumps, steering wheel vibration, uneven tire wear, wandering steering, and visible bushing cracks. If your vehicle has over 80,000 miles on original suspension components, preventive replacement is recommended. Q: Are ball joints pre-installed and greased?A: Yes. All control arms come with ball joints pre-installed and pre-greased from the factory. They are ready to bolt on and drive — no additional assembly required. Q: What's the difference between this kit and individual OEM parts?A: Our complete kit includes all the components you'd typically buy separately at the dealership — control arms, ball joints, and bushings — in one package at a significantly lower total cost. Individual OEM parts can easily exceed $500+ per side; our kit provides comparable quality for 40-60% less. Q: How long do aftermarket control arms typically last?A: With proper installation and alignment, expect 60,000-100,000+ miles of service life. Lifespan depends on driving conditions — rough roads, potholes, and off-road use accelerate wear. Regular inspection every 30,000 miles is recommended. Q: Do you offer warranty on control arm kits?A: Yes — all iFJF control arm kits include a 1-year limited warranty against manufacturing defects. If you experience any quality issues, contact our support team for a replacement or refund. Related Products Explore more from our collections: Control Arms & Suspension — complete front-end parts Auto Parts & Accessories — thousands of quality replacement parts Contact Us — have a fitment question? We're here to help Ready to Restore Your Suspension? Don't let worn control arms compromise your safety and driving experience. Order today and enjoy smooth, confident handling again. Fast Shipping • 1-Year Warranty • Lifetime Support

Read more less

Product Overview Brighten up your refrigerator interior with the iFJF WR55X11132 Refrigerator LED Bulb Light. This energy-efficient LED replacement fits most GE refrigerator models and replaces multiple OEM part numbers including WR55X25754, WR55X26486, WR55X30602, and 4590213. If your fridge interior is dim, flickering, or completely dark, this simple bulb swap restores full illumination in seconds. Key Features Multi-Model Compatibility: Replaces GE OEM part numbers WR55X11132, WR55X25754, WR55X26486, WR55X30602, and 4590213. LED Technology: Brighter, cooler-running, and more energy-efficient than original incandescent bulbs — lasts up to 15,000 hours. Instant On: No warm-up time — full brightness immediately when the door opens. Easy Swap: Twist-in design replaces old bulb in seconds — no tools, no wiring, no technician needed. Consistent Color: Natural white light (4000K) illuminates food clearly — find what you need without hunting. Compatibility Brand Replaces Part Numbers GE WR55X11132, WR55X25754, WR55X26486 GE WR55X30602, 4590213 Specifications Spec Detail Part Numbers WR55X11132, WR55X25754, WR55X26486, WR55X30602, 4590213 Type LED (Light Emitting Diode) Base Twist-Lock (Proprietary GE) Color Temperature 4000K Natural White Lifespan ~15,000 Hours Frequently Asked Questions Q: Will this fit my GE refrigerator model?A: This bulb fits most GE refrigerators that use the WR55X series light bulbs. It replaces WR55X11132, WR55X25754, WR55X26486, WR55X30602, and 4590213. Check your owner's manual or the part number on your existing bulb to confirm. Q: Is this brighter than the original bulb?A: Yes — this LED replacement produces brighter light while using less energy and generating less heat than the original incandescent bulb. The 4000K natural white color makes food items easier to identify. Q: How do I install this bulb?A: Simply twist the old bulb counterclockwise to remove, then insert the new bulb and twist clockwise until it locks. No tools required — it takes about 10 seconds. Q: Will an LED bulb work in a refrigerator?A: Absolutely — LEDs actually perform better than incandescent bulbs in cold environments. They're more durable, use less energy, and don't add heat to the refrigerator compartment. Q: Does this bulb work in the freezer compartment too?A: This bulb is designed for the fresh food compartment. Freezer compartments typically use a different bulb type. Verify your freezer bulb part number before ordering.

Read more less

Product Overview Restore your 2007-2014 BMW X5 E70 / X6 E71's handling and ride quality with this premium Front Control Arm Kit. Manufactured to meet or exceed OEM specifications, iFJF control arms deliver precise steering response, reduced road noise, and long-lasting durability. Each unit features pre-installed ball joints, corrosion-resistant coating, and exact dimensional fitment for hassle-free installation. Key Features Pre-Assembled Ball Joints: Factory-installed and lubricated for quick bolt-on replacement — no pressing required OEM-Spec Engineering: Precision-manufactured to exact factory dimensions for guaranteed fitment Heavy-Duty Construction: Forged steel/aluminum construction withstands demanding driving conditions Corrosion-Resistant Coating: E-coat finish protects against rust, salt, and road debris for extended service life Enhanced Bushing Design: High-durometer rubber bushings absorb vibration and minimize NVH Complete Pair: Includes both left and right side control arms for a balanced suspension rebuild Vehicle Compatibility Year Range Make Model Position 2007 BMW X5 E70 / X6 E71 Front Lower 2014 BMW X5 E70 / X6 E71 Front Lower Technical Specifications Part Number CA-0029 Position Front Lower / Rearward Quantity 2 Pieces (Left + Right) Ball Joint Pre-Assembled & Greased Material Forged Steel / Aluminum Finish E-Coat Anti-Corrosion Symptoms of Worn Control Arms Clunking or knocking noises from front suspension over bumps Uneven or premature tire wear patterns Steering wheel vibration or wandering at highway speeds Vehicle pulling to one side during braking Excessive body roll in corners Installation Guide Installation time: 2-4 hours per side. Professional alignment is required after installation. We recommend having a qualified mechanic perform this replacement. Always replace control arms in pairs for balanced handling. Frequently Asked Questions Q: Will this fit my 2007-2014 BMW X5 E70 / X6 E71?A: Yes. This control arm pair is designed specifically for the 2007-2014 BMW X5 E70 / X6 E71. Please verify your vehicle's exact year and sub-model before ordering. Q: Do these come with ball joints installed?A: Yes. Each control arm arrives with a pre-assembled, lubricated ball joint ready for direct bolt-on installation. Q: Do I need an alignment after installation?A: Yes. A professional wheel alignment is absolutely required after replacing control arms to ensure proper handling and tire wear. Q: Are these sold individually or as a pair?A: This listing includes both left and right side control arms as a matched pair. Q: How do these compare to OEM?A: These control arms meet or exceed OEM specifications in materials, fitment, and durability — at a fraction of dealer pricing. Q: What's the warranty?A: iFJF provides a 1-year / 12,000-mile warranty against manufacturing defects. Q: Do I need any special tools?A: Standard metric socket set and a ball joint separator tool are recommended. A torque wrench is essential for proper installation. Related Products Complete your suspension rebuild with these related parts: BMW Suspension Parts — Full range of suspension components Control Arms & Ball Joints — Complete control arm selection Tie Rods & Steering — Steering linkage components

Read more less

Product Overview Portable Adjustable Laptop Stand Notebook Tablet Holder Foldable Computer Desk — a high-quality aftermarket replacement part engineered to meet or exceed OEM specifications. Designed for durability and precision fit, this product delivers reliable performance for your vehicle or equipment. Key Features Precision Engineering — Manufactured to exact tolerances for a direct fit and reliable operation. Heavy-Duty Construction — Built with premium materials to withstand demanding conditions and extended service life. Easy Installation — Designed for straightforward bolt-on replacement with basic hand tools. No special equipment required. Cost-Effective Alternative — Provides OEM-comparable quality at a fraction of dealership pricing. Quality Tested — Each unit undergoes rigorous quality control inspection before shipping. Compatibility Information Please verify fitment for your specific vehicle or equipment before ordering. Check your owner's manual or existing part number to confirm compatibility. Specifications Brand iFJF Condition New Material Premium-Grade Components Package Includes 1x Portable Adjustable Laptop Stand Notebook Tablet Holder Foldable Computer Desk Why Choose iFJF iFJF Direct specializes in high-quality aftermarket parts and accessories for automotive, powersports, marine, and outdoor applications. Every product is backed by our commitment to quality and customer satisfaction. ✅ Manufactured to strict quality standards ✅ Fast, reliable shipping from US warehouses ✅ Responsive customer support team ✅ 30-day return policy for your peace of mind Frequently Asked Questions Q: Will this fit my specific model? A: Please refer to the compatibility information above or contact our support team with your vehicle/equipment details. We're happy to verify fitment before you order. Q: Is this an OEM or aftermarket part? A: This is a premium aftermarket replacement part manufactured to meet or exceed OEM specifications. It provides exceptional quality at a more affordable price point. Q: What's included in the package? A: The package includes the Portable Adjustable Laptop Stand Notebook Tablet H as shown in the listing images. Installation hardware is included where applicable. Q: How difficult is the installation? A: Installation is designed to be straightforward for anyone with basic mechanical skills. Most installations can be completed with standard hand tools. Q: What is your return policy? A: We offer a 30-day return policy. If the part doesn't fit or you're not satisfied, contact us for a return authorization. The item must be in new, unused condition. Q: How fast is shipping? A: Orders are processed within 1-2 business days. Standard shipping typically delivers within 3-7 business days within the continental US. Shop with Confidence Add to cart now and get your Portable Adjustable Laptop Stand Notebook Tablet H shipped fast. Questions? Contact our support team — we respond within 24 hours.

Read more less