Products

Thermostat & Gasket Legacy Forester Outback Impreza 21200AA072

Read more less

Fitment: Threaded inlet strainer kit replacement for 1-1/2 "Hose Filter Pump, Above-Ground Pool Fitting Function: Filter mesh can avoid blades and other large objects in the water into the pump, affecting the pump life.The whole body can be divided into different parts for easier installation, disassembly and cleaning. Material: The imported filter is mainly made of plastic material, durable, not easy to damage, the washer is made of soft rubber material, providing a waterproof sealing effect. Installation: Make sure the pump has a threaded 1-1/2 inch hose. If not, you'll need a (1-1/4 "to 1-1/2") adapter for a 1-1/4 "hose. In a flat 4 "x 4" area at the side of your pool, let the threaded connector and rubber washer pass through the hole inside the pool and tighten, then connect directly to the hose or hose adapter Package include: A mesh grid, a threaded joint, and a rubber washer

Read more less

The Throttle Body Spacer is designed to enhance off-idle torque from 800 rpm to approximately 3,000 rpm.  The spiral design increases intake velocity and provides superior air/fuel mixture before combustion, resulting in more power. Increase your power gains from additional intake or exhaust mods as well as forced induction. Improves low-end torque & throttle response.

Read more less

This SES Suspension Upgrade fits the rear suspension of a Chevrolet Silverado 2500/3500 & GMC Sierra 2500/3500 truck. We’ve engineered our hollow rubber springs to deliver a progressive spring rate. In other words, the more weight that pushes down on the rubber springs the harder they work to prevent rear end sag. Whether you’re pulling a trailer or carrying a heavy load in the bed of your truck, our hollow rubber springs adjust automatically to keep the vehicle level at all times. This SES Suspension Upgrade replaces the jounce stop on the frame. Its unique design ensures superb ride quality – loaded or unloaded. (There should be a ½” to 1 ½” gap between rubber spring and axle to ensure unloaded ride quality.) Unlike other auxiliary spring systems, the SES Suspension Upgrade guarantees the best of both worlds. FITMEN 2011-2019 Chevrolet Silverado 2500 HD – 2/4WD 2011-2019 Chevrolet Silverado 3500 Pickup/Cab & Chassis – 2/4WD 2011-2019 Chevrolet Silverado 3500 HD Pickup/Cab & Chassis – 2/4WD 2011-2019 GMC Sierra 2500 HD – 2/4WD 2011-2019 GMC Sierra 3500 HD Pickup/Cab & Chassis – 2/4WD

Read more less

1.Fitment:for Ford 4.6L 3V V8 2005-2010 Mustang, 2006-2010 Explorer 5.4L 3V V8 2004-2012 F-Series 2005-2010 Expedition,2005-2014 Lincoln Navigator 6.8L 5.4L 3V V10 engines 2005-2012 F-Series 250-350-450.2.Function(Cam Phaser Lock Out Kit):Eliminates cam phaser failure engine noises caused by phasers that have failed or are not rating correctly.3.Cam Phaser Design:Designed with a triangle shape with four holes to perfectly fits for your cam phaser, it is a quite available accessory to make you do the phaser job with ease.4.Tuning this Locks cam phasers in fully advanced or fully retarded position.Eliminates possible piston to valve problems with aftermarket camshafts Eliminates possible cam phaser failure in high HP applications.5.Usage:During doing camshaft or cam phaser work,push down on this tool and wiggle it as deep as possible, then pull up a little (the chain will come up with the tool).Thus you have extra wiggle room for removing phaser.

Read more less

1.Fitment:Lincoln Mercury 2005-2014 vehicles with 5.4L and 4.6L 3V engines,Navigator.for Ford Mustang,F-150,Super Duty,F-250,F-350,F-450,F-550,Explorer, Mountaineer,Sport Trac,Expedition.2.Function:With this timing chain tool,make it easily camshaft or cam phaser changed on your vehicle without losing chain tension and without removing the timing cover.3.Usage:During doing camshaft or cam phaser work,push down on this tool and wiggle it as deep as possible,then pull up a little (the chain will come up with the tool).Thus you have extra wiggle room for removing phaser.4.Benefits:Black Hard plastic on the end of the tool resists damage from the timing chain.Firm metal rod allows the wedge to get deep enough.5.Dimensions:11.41” (29cm) handle;13.19” (33.5cm) overall length.

Read more less

Replacement:Tailgate Handle for Tundra 2007-2013 with Keyhole. Part number:69090-0C040,81213,TO1915113. Function:This rear tail gate latch handle is a direct replacement with the same fit and finish manufactured,and will function and perform just as the original part. Feature:The original handle is known to break inside over time,whether it's the cracks or clips in the handle housing itself, this will lead to nothing happening when you pull up on the handle,This handle will fix the issues at that time. Package Includes:1 x Tailgate handle.

Read more less

1.Perfect Fit for Your Wrangler: Roof Top Sunshade is specially designed for the 2007-2018 Wrangler JK JKU Sahara Rubicon Sport Sport S 2&4 door, ensuring a perfect fit and maximum protection.2.Maximum Protection from UV Rays and Wind Noise: Our sunshade effectively reduces sun rays and wind noise, blocking up to 90% of the sun's rays and reducing sun exposure. It also protects your car interior from damaging UV rays, fallen leaves, and dust, making it the perfect accessory for summer, highway, forest, and desert adventures.3.Hassle-Free Installation: Installing our roof top sunshade is a breeze. You won't need any tools or vehicle modifications to install it. Simply thread the included bungee cord through the hole in the sunshade net and attach it to the pole on the roof. 4.High-Quality Design for Long-Lasting Protection: Our sunshade is made of high-density beach PVC material that is wear-resistant, fade-resistant, and anti-aging, ensuring long-lasting protection for your car interior. It also features double-sewn edges and metal grommets for added durability.5.Enjoy Any Top: This Roof Top Sunshade is compatible with both hard tops and soft tops, so you can enjoy added protection no matter what type of top you have. Upgrade your Wrangler with our roof top sunshade today and experience maximum protection, hassle-free installation, and long-lasting durability.

Read more less

Crafted from premium aluminum alloy, this EGR Block Off Plate offers high toughness and durability. It is resistant to damage and built to withstand the rigors of vehicle use, ensuring long-lasting performance. PERFECT FIT FOR SPECIFIC ENGINE MODELS: Designed to perfectly fit 20R, 22R, 22RE, and 22RET engines, this block off plate features a precise design that ensures a seamless and secure fit. You can rely on its compatibility with your specific engine model. DEPENDABLE AND CONVENIENT: This EGR Block Off Plate is dependable for use and offers convenience when it comes to assembly and disassembly. Fitment:For Toyota 20R, 22R, 22RE, & 22RET EngineKit Includes:2 exhaust manifold plates1 EGR plate1 EFI plenum plate

Read more less

5 Micron Filters with Seals.Improved filter performance. Direct Replacement, Superseded Part Number:22937279 23456595 replaced by 23304096. For this filter, during servicing only the filter element is replaced, the shell and its internal components remain for the balance of the vehicle's life. Manufactured to meet expectations for fit, form, and function.Fuel Filter Kit contains everything you need to replace a fuel filter on your vehicle. Package includes:1 x TP1015 Fuel filter.

Read more less

Features: Brand New & High-Quality parts .  According to the original factory specifications.  Strict quality control standards to Build and test.  Design improved for more durability, Stable and updated characteristics, high reliability.  Perfect match and direct replacement of original parts.  Specifications: Item: Throttle Position Sensor Fitment Type: Direct Replacement.  Warranty: 1 Year

Read more less

Fiment models:501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 2000 (4 Cyl, 62-64), 2030, 2031, 2110, 2111, 2120, 2130, 2131. Replace part number: 310746, B8NN9510A, 312954,Marvel Schebler Number TSX785 and TSX695 Fits all of the model numbers above with 4 cylinder 134 cubic inch engines 1958 - 1964 with listed Marvel Schebler Carburetors. Package include: 1 carburetor,3 gaskets,2 spark plus,3 entrainments and 4 clips,2 nuts,2 screw,1 Rubber hose Warning: before choosing this type of carburetor, please carefully confirm the type of carburetor you need to avoid any purchase problem Our new Aftermarket Replacement Carburetor Assembly with Mounting Gasket for Ford Tractor models: 501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771, 2000 (4 Cylinder), 2030, 2031, 2110, 2111, 2120, 2130, 2131.Fits all of the model numbers above with 4 cylinder 134 cubic inch engines 1958 - 1964 with listed Marvel Schebler Carburetors.

Read more less

Fitment:LPD47391 Advanced Cooling Protection for Car, Van, Light Truck, R.V. and Towing Applications.Suitable for applications up to 40,000lbs Gross Vehicle WeightHigh-Quality: Precise fin Spacing.Reliable, Durable Brazed Aluminum Construction.Function:Self-regulating flow for maximum lube flow protection through cold start-up, varied temperatures and driving conditions, heavy loads and towingPackage included: Transmission Oil Cooler,Bolts, nuts, washers, mounting straps, Brass fittings, high-quality cooler hose,hose clamps(No installation instructions)NOTE: This kit is NOT intended for operation below 32 degrees Fahrenheit

Read more less

Function: Secures any crossover tool box and increase the strength with a larger clamping area.Fitment: They are suitable for almost all brands and models of trucks, so you can buy with confidence because you will get simple and easy installation.This truck Tool Box Mounting Kit is not only suitable for Crossover series boxes, but also can be used with other cargo management systems to achieve more functions.High quality: Made of high-quality industrial-grade materials, 6000 series corrosion-assisted aluminum alloy fixtures and anti-rust washers and bolts.Instructions:The clip of the tie makes contact with the bottom side of the truck bed rail. Run the bolt through the hole(s) located on either side of the tool box and fasten down with the washer and nut. The Mounting kit need to hook around the lip of the truck bed rail.Package includes:4*Aluminum j hook blocks, 4*bolts, 4*flat washers, 4*lock washers

Read more less

Function: Secures any crossover tool box and increase the strength with a larger clamping area.Fitment: They are suitable for almost all brands and models of trucks, so you can buy with confidence because you will get simple and easy installation.This truck Tool Box Mounting Kit is not only suitable for Crossover series boxes, but also can be used with other cargo management systems to achieve more functions.High quality: Made of high-quality industrial-grade materials, 6000 series corrosion-assisted aluminum alloy fixtures and anti-rust washers and bolts.Instructions:The clip of the tie makes contact with the bottom side of the truck bed rail. Run the bolt through the hole(s) located on either side of the tool box and fasten down with the washer and nut. The Mounting kit need to hook around the lip of the truck bed rail.Package includes:4*Aluminum j hook blocks, 4*bolts, 4*flat washers, 4*lock washers

Read more less

The Hitch pins are 4.5 long and 5/8 dia. The pins are 4 3/16" long from shoulder to inside of clip. Stainless Steel Replacement Pin for the 2" and 2.5" Tow & Stow Receiver Hitch Machined from stainless steel rod, these hitch pins are built to pull a serious load. Designed for use with B and W Tow and Stow line of receiver hitches. They are manufactured from high-tensile strength stainless steel for ultimate durability and long lasting good looks. In order to operate a Tow & Stow Hitch, a total quantity of three pins are needed. You will receive 3 pin with the purchase.

Read more less

TST-129 RV Jack Drill Adapter Easily raise and/or lower your jacks with the use of your 3/8" or 1/2" power drill.Can be used for all RTP tripod jacks and Mechanical 4-Corner jacks.Reduces time and effort to raise or lower Scissor jacks. Helps prevent back pressure caused by the hand crank.Please check the product details before purchasing. iFJF 11094 Camper Jack Crank Drill Bit Adapter Replaces TST129 TST-129 RV Jack Drill Adapter Easily raise and/or lower your jacks with the use of your 3/8" or 1/2" power drill. Attached to the electric drill/cordless electric drill, the scissor jack can be adjusted in a few seconds.

Read more less

Use 450 degree rated O-ring which has high sealing performance. No leakage and distortion.The drain flange is suitable for T3/T4 turbines and has 2 inch bolt spacing.The extended turbine oil drain fitting makes it easy to connect or remove the 10AN drain hose to the turbocharge.Made of aluminum alloy material with anodizing and anti-rust treatment, lightweight and high hardness, anti-rust and corrosion resistance.Package include 1 x Flange adapter, 2 x M8*1.25mm Bolts, 1 x O-ring.

Read more less

1.The product replacement for 717 Sea Doo HX 1995-1997 SPX 1996 GTI 1996 XP 1995 GP800/GP800R 1998-2005 XL 800/XLT 800 2000-2004.2.Includes:2 Needle Valves Seats,as the picture.3.Works only on exact Years / Models listed below SEA-DOO HX 1995-1997 XP 1995 (717 ONLY) SPX 1996 GTI 1996 GP800 / GP800R 1998-2005 XL 800 / XLT 800 2000-2004.4.SEA-DOO XP 1994 XP 1995-1997 (787 ONLY) GTX 1995-1997 SPX 1997-1999 GSX 1996-1997 XL 700 1999-2004 SUPER JET 1996-2014 WAVE RAIDER 1994-1995 WAVE BLASTER 1996 WAVE VENTURE 1995-1998.5.SEA-DOO GT 1991 SPX 1993-1995 XP 1991-1993 GTX 1992-1994 XP / XP LTD. 1998-2002 GTX LTD. 1998-1999 GTX 2000-2002 GSX LTD. 1998-1999 LRV 2000-2001 RX / RXX 2000-2002.

Read more less

1.NEW KEIHIN CDK-2 TWIN CARB REBUILD KIT.2.Includes: 2 Complete Carburetor rebuild kits OEM quality replacement kit Fits all Keihin CDK-2 38-44mm carbs.3.All parts included for complete rebuild of 2 carbs.4.Evertyhing needed as shown: o-rings, spring, diaphragms, check valve Includes viton tip needle Exact kits you will receiveare pictured.5.Replacemnet for KAWASAKI ZXI 1100 1996-1997 ZXI 900 1995-1997 ZXI 750 1995-1997 STX 1100 1997 STX 750 1997-1998 SUPER SPORT XI 1994 SUPER SPORT 1992-1995 SXI PRO 750 2000-2001 SXI 750 1995 ST 750 1994 XI 750 1995 XI SPORT 1998-1999 XIR 1995, 1999 TS 1994-1996 X2 1994-1995 SX 1992-1995 POLARIS OCTANE 2002-2004 GENESIS 1999-2002 FREEDOM 2002-2004 VIRAGE TX 2000-2002 VIRAGE 2001-2004 PRO 1200 2000-2001 SLH 1998-2003 SLHX 1998 SLX 1999-2001 SLTH 1998-1999 SLT1996-1997 SL 900 1996-1997 XL 1050 1997.

Read more less

Fitment: 2002-2006 Escalade Avalanche, 1999-2006 Silverado, 2000-2006 Tahoe Suburban Yukon Sierra, 2003-2014 Express GMC Savana. Replacement Instructions: The front control arm bumper replaces part number 15153958 or 905-208. The rear control bumper replaces the part number 15039397. You can get 2 front arm bumpers + 2 rear bumpers (as shown). What It Does: Four bumpers protect the suspension and extend the life of the car by helping to reduce stress during bumps. Material: Bumpers are made of good quality anti-crack and compressive material processing, each batch of products have been strictly tested before leaving the factory, the shock absorption effect will make you more comfortable on the way. Simple Installation: Just remove the old or bad bumpers and replace the new bumpers. Considering safety, professional installation is strongly recommended.

Read more less

Type: Filter Model Number: uf-10k UF-10K Fuel Filter Easy installation Corrosion resistant colour:yellow Material:filter paper Package Contents: 1*Fuel Filter elements

Read more less

【Engines Fitment&Replace OEM#】High quality aftermarket filters fits for yacht diesel gasoline engine. Replaces UF-10K. 【High Performance】The filter media reduces the number of harmful particles reaching the engine injectors, reduces equipment downtime and reduces the total cost of ownership (TCO). The penetration of hard particles is reduced by 10 times, which can fully protect the injector from progressive damage and extend the service life. It has twice the pollutant absorption capacity of traditional filters and is designed to deliver clean fuel to the high-pressure common rail (HPCR). The filtration efficiency exceeds 99.6%. 【Notice】There are many types of filters to choose from in our shop. Please carefully identify the filters you need to avoid buying mistakes. The quality of our filter products meets or exceeds OEM parts, please rest assured to buy. 【Installation】No modification to the electrical system is required, plug-and-play, direct fit.Please always pre-fill clean fuel on the dirty side of the filter without opening the fuel cap.Do not reuse the old filter, it will cause great damage to the car engine. After installing the new filter, prime and start the engine, wait a few minutes, and then check for leaks. 【Quality Assurance】Our shop guarantees to provide the best quality filters, where you can spend the least money to buy the best products. In addition, we will provide you with lifetime technical services. If you have any questions, you can contact us and we will solve it for you. Besides, you can also enjoy a 12-month warranty in our shop.

Read more less

Function: The urea pump filter optimizes engine performance and fuel consumption, enabling exhaust emissions to meet or exceed EPA emission standards. Reference Part NO#: UF101, 83121350520, 6658167A1, 4601354, 8821335, 98350716, 23381558, 21516231, 5303604, 2888182, 2880298, 5802310802, 2014774PE, 2014774, RE554498, 1457436088, S17K030011, F00BH40428E5Z, F00BH40343, 1457436033, 97177027, 11503650, 40041200003, K6087337AA, 20452LC40A. Compatible vehicles: Compatible with 2008-2020 Freightliner trucks, compatible with 2008-2021 International trucks, compatible with 2009-2015 Ford trucks, compatible with 2001-2021 Peterbill trucks, compatible with 2008-2021 Kenworth trucks, compatible with 2008-2021 Mack trucks, compatible with 2010-2016 Cummins. For more vehicle models, please refer to the OE number. Package Includes:Urea pump filter * 1, bracket * 1. Note: It is a replacement part. To better fuel consumption and protect your engine, please replace the filter regularly.

Read more less