Products

Brand new design: This product is an upgraded version. The original filter element is not removable, and the outer shell needs to be replaced at the same time when replaced. After upgrading, you only need to replace the internal filter element each time, which can greatly save your cost. Material upgrade: The new version of the filter element housing is made of aluminum alloy and powder coated, which can effectively prevent corrosion and rust caused by seawater when going out to sea, and has a long service life. At the same time, the more sturdy and compact design effectively avoids leakage problems. More cost-effective: In addition to the fuel water separator assembly, it comes with two replaceable filter elements. The original version of the filter element is not removable. After the upgrade, only the internal filter element needs to be replaced each time, rather than the entire metal filter element that will rust. It can greatly save money and resources. High Filtration Efficiency: High-precision filters can capture and remove particles as small as 10 microns and emulsified water in diesel fuel, protecting inboard, stern drive and outboard fuel injection systems from damage. And provide sufficient fuel flow to meet engine needs. Replace part number: Replaces 35-807172, 35-60494-1 for universal outboard motor. S3213、S3214、R25T、B32013、18-7932-1、18-7932、18-7928-1、18-7928、35-809097、MAR-24563-03-00、18-7919、18-7919-1、35604941、B32013、1879321、187932、1879281、187928、35809097、 MAR245630300、187919、1879191. Package include: 35-60494-1 Fuel Water Separating Filter*1 (with filter element installed), filter element*2, 3/8-Inch Barb*2, 1/4-Inch NPT brass fittings*2, and a roll of PTFE thread tape. It is recommended to check and replace the oil cup and filter element regularly. High cost performance Two filter cartridges will be given for free in the package, which is equivalent to buying one component and two filter cartridges, and the purchase cost is lower.The original filter cartridge cannot be removed, and the outer shell must be replaced at the same time when it is replaced. After upgrading, only the internal filter cartridge needs to be replaced each time, which can greatly save costs and resources. Corrosion protection The new filter housing is made of aluminum alloy and powder-coated, which can effectively prevent seawater corrosion and rust when going out to sea, and has a long service life. At the same time, the more solid and compact design can effectively avoid the problem of oil leakage. Fast drainage A black valve underneath the clear nylon oil catch bowl controls the draining of water, and any accumulated water can be seen through the bowl and easily drained by rotating the bowl without having to remove the entire filter element. It is recommended to check and replace the oil cup and filter element regularly.

Read more less

Fitment: The upper bearing carrier puller is replacement for Johnson, Evinrude, Mercury. Function: The upper bearing housing can be easily disassembled, reducing the time spent on dismounting the upper housing bearings. No more prying against seal surfaces, no damage potential. Advantage: The installation of the marine upper bearing puller is simple and fast, without the need for other complex assembly tools. Simply insert the screw into the sleeve and groove, align the jaws on both sides of the groove, and adjust the jaws appropriately to fit the gearbox. Material: The roller puller is made of durable steel material, sturdy and durable, with good rust and corrosion resistance. Note:1*Upper Bearing Carrier Puller, 1*MT0013 Collar Adapter, 2*Adjustable Arms, 2*Bolts. This product does not contain instructions.

Read more less

Replace OE number:13627812530, 13628509721, 13628511666, 13628576471, 13628518791 5WK96699C Apply to:335d 2009-2011, 328d 2014-2018, 328d xDrive 2014-2018, 535d 2014-2016, 535d xDrive 2014-2016, X3 2015-2017, X5 2009-2017, 740Ld xDrive 2015. The NOx sensor is composed of high-quality materials, with stable and durable output signals, meeting the detection of NOx Package includes: 1 x NOX sensor Easy installation:When the engine indicator light comes on, it indicates that there is a problem with the NOx sensor. Simply replace the parts, remove the damaged NOx sensor, and replace it with a new one

Read more less

Replace OE number:059907807C, 5WK96637B, 03L907807F Apply to:Q7, Touareg TD The NOx sensor is composed of high-quality materials, with stable and durable output signals, meeting the detection of NOx Package includes: 1 x NOX sensor Easy installation:When the engine indicator light comes on, it indicates that there is a problem with the NOx sensor. Simply replace the parts, remove the damaged NOx sensor, and replace it with a new one

Read more less

Replace OE number:A0101531928, EA0101531928, 5WK9 7341A Apply to:Detroit DD13 DD15 DD16 2010-2016 The NOx sensor is composed of high-quality materials, with stable and durable output signals, meeting the detection of NOx Package includes: 1 x NOX sensor Easy installation:When the engine indicator light comes on, it indicates that there is a problem with the NOx sensor. Simply replace the parts, remove the damaged NOx sensor, and replace it with a new one

Read more less

1.Fitment: Perfect fits for most UTVs and ATVs, such as Polaris RZR / Ranger, Can-Am Maverick X3 / Outlander / Defender. Also suitable for most Trailer, RV, Truck, Golf Cart, Snowmobile, Boat and etc.2.Material: Made of high quality HDPE plastic with sturdy construction. Not easy to produce cracks and scratches, will not be easily broken. Compared with the aluminum license plate holder, it will not cause friction damage to the license plate. It can be used for a long time and adapt to various weather conditions.3.LED Light: The holder equipped with waterproof and bright LED light, so it can be used for a long time. And even in the dark night, your license plate can be seen clearly.4.Function: Holds your license plate firmly in place, make your vehicle street legal.5.Installation: Easy to install, drilling may be required. Plug and play. Package include one license plate bracket, necessary hardware and instruction.

Read more less

1.Wide Fitment: Perfect fits for 2021 Polaris RZR Trail 900/S 900/S 1000, 2014-2020 Pioneer 500/700/1000, 2019-2020 Talon 1000R/1000X/1000X-4, 2011-2018 Can-Am Commander 800/1000/Max, Can-Am Maverick Max/ Outlander,Arctic Cat Prowler/ Wildcat/ Wildcat 4, Kawasaki Teryx/ Teryx 4. ( See specific year and model in FITMENT on description )2.Turn Signal Switch: The universal turn signal switch is pressure casting and chrome-plating. It needs to be clamped on the steering column without drilling or cutting. With amber LED light, your vehicle can be noticed in dark night or foggy weather.3.Long Wiring Harness: The long wiring hardness can fits 2 seat and 4 seat vehicles. Each color line indicates the corresponding installation position to improve installation efficiency. Avoid unnecessary wrong installation.4.105D Horn: The loud and clear 105D horn can remind the nearby vehicles and pedestrians. Enhance their vigilance, so as to improve their safety awareness. 5.Installation and Package: Easy to install, plug and play. Package mainly includes turn signal switch kit, Amber LED signal lights, horn, wiring harness, wire tie, instruction and other necessary parts.

Read more less

Fit Engine Codes: CBUA, CBTA, CEPA, CEPB, BPS, BPR BGP, CEPB, BGQ. Fit for VW, Audi ,Jetta, Beetle, New Beetle, Golf, Rabbit, Passat. Part Number: 07K145100C. Easy to use and store. Interchange Part Number: 07K 145 215A, 07K 145 100H, 07K 145 100 H.

Read more less

Applicable models: 765 1 "and 1-1/4" pressure vacuum circuit breaker valves, 905-212. High quality materials: Made of high-quality plastic and rubber, the valve stem is made of high-quality brass. Easy to install: No special tools are required. Please apply lubricating grease to the valve cover components and bronze valve threads. You can choose to use appropriate tools to tighten. Kit composition: valve cover assembly (valve cover, valve stem, O-ring, E-ring, spring, gasket, nut), lifting valve assembly (lifting valve, rubber ring).

Read more less

1.This valve cover oil cap fit for LEXUS LS1/ LS6 LS2/ LS3 LS7.2.This billet black valve cover cap is made of high quality material and durable in use. It adopts premium material and advanced technology, which having high performance and longer service lives.3.The prominent advantage of the valve cover cap is easy and simple installation, which convenient for assembly and disassemble.4.This valve cover adapter replaces the original oil fill tube on the valve cover.5.It is CNC machined from billet aluminum for precise fit, and the included silicone O-ring is specially designed to prevent oil seepage at the base of the adapter.

Read more less

1.Fitment: Perfect fits for intake and exhaust valves of La Cathedral port cylinder heads LS1/LS2.2.Material: The compression tool of valve spring is made of aluminum alloy, which has the advantages of reliability and durability. Its long service life reduces replacement cost.3.Design: The design of the valve spring compression tool is simple and elegant, and the exquisite workmanship will not affect the performance of the whole vehicle. It is convenient to install with wrench.4.Replacement: Simply replace the rocker arm with screws, insert the square head of the standard switch lever or socket wrench into the left or right side of the tool, and then pry down on the spring.5.Easy to use: This tool makes removal and installation of new valve springs more easier and more convenient, saving your time and effort.

Read more less

Features:Installation: directly replace and easy to install;Built to strict quality standards and use superior quality parts;100% test before shipping to ensure product safety, stability and durability;Part Number:12610560, 55593172, 126617632142137, 214-2137911082, 911-082555931172,0280142548PV479, 2M1113Fitment:2010 Buick Allure 3.0L 3.6L2009-2018 Buick Enclave 3.6L2010-2016 Buick LaCrosse 3.6L2010 Buick LaCrosse 3.0L2013-2014 Cadillac ATS 3.6L2010-2015 Cadillac CTS 3.6L2010-2013 Cadillac CTS 3.0L2014-2016 Cadillac ELR 1.4L2012-2016 Cadillac SRX 3.6L2010-2011 Cadillac SRX 3.0L2013-2018 Cadillac XTS 3.6L2012-2015 Chevrolet Camaro 3.6L2012-2017 Chevrolet Caprice 3.6L2012-2015 Chevrolet Captiva Sport 3.0L2015-2016 Chevrolet Colorado 3.6L2013-2017 Chevrolet Equinox 3.6L2010-2012 Chevrolet Equinox 3.0L2012-2018 Chevrolet Impala 3.6L2014-2016 Chevrolet Impala Limited 3.6L2009-2018 Chevrolet Traverse 3.6L2011-2015 Chevrolet Volt 1.4L2009-2017 GMC Acadia 3.6L2017 GMC Acadia Limited 3.6L2015-2016 GMC Canyon 3.6L2013-2017 GMC Terrain 3.6L2010-2012 GMC Terrain 3.0L2009-2010 Saturn Outlook 3.6L

Read more less

1.【FITMENT】For wrangler JK JKU 2007-2018,Wrangler JL JLU 2018-2020,2020 JT Gladiator truck2.【MATERIAL】High mechanical strength, good toughness, high tensile and compressive strength;heat resistance; wear resistance3.【FUNCTION】A special isolation net can kept you and your pet from a safe distance.pets in the trunk will not affect your driving, protecting your driving safety4.【EASY TO INSTALL】 Simple installation, just align the product to the position of the vehicle and install it without drilling or cutting.with 4 adjustable bands and 4 hooks(2 side+2 bottom). You can install it just a few moment,easy intstalll and disassemble to clean5.【PACKAGE】 - 1 X Rear Seat Isolation Barrier Net.Notice: this unit suitable for medium, large pets, help prevent dogs moving from the bottom and sides

Read more less

Fitment:Fits Weber 40mm 44mm 48mm IDF. Material:Made of steel and chrome plated, extending service life. Dimensions:Inner diameter 1.77 inches, diameter 2.24 inches high. Function: Allow air to enter the intake channel smoothly and evenly at high speed. Package included:6*Velocity Stacks Air Horn Pipe Trumpet. This product does not contain instructions.

Read more less

Fitment: Hitch adapter is made to be used for Category 1, 3-point tractors such as snowplows, mowers, or boom poles and medium to large farm equipment. Function : Enables the Category 1 Quick Hitch to be used with implements that are not made to ASABE quick hitch standards. As long as the width of the tow bar is less than 2-3/4 inches, the connector provides a simple connection and is suitable for Class 1 three-point tractors. This top hook bracket has a 3/4 inch mounting hole and is equipped with a lynch pin. This quick hitch adapter guarantees the quality and appearance through perfect welding techniques, so that your equipment can be better connected and operating. The adjustable top bracket hitch adapter is made of heavy-duty steel structure to ensure the stability of the equipment connection to the greatest extent. Package included: 1 Set Quick hitch,1* lynch pin Fitment: Hitch adapter is made to be used for Category 1, 3-point tractors such as snowplows, mowers, or boom poles and medium to large farm equipment. Function : Enables the Category 1 Quick Hitch to be used with implements that are not made to ASABE quick hitch standards.

Read more less

Made of durable material,this voltage regulator has great performance and not easy to be damaged. Designed with heat sink fins,so it will have a better heat dissipation to prevent overheat. Designed with 12V rated voltage,the motorcycle battery can directly power it. The silicone potting process makes the rectifiers reach the IP65 waterproof rating, and the rectifiers will not be damaged by rain due to long-term use. Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service.

Read more less

Function: The fuel pump sucks the fuel from the fuel tank, filters it through the filter element, pressurizes it, and delivers it to the fuel supply pipe to ensure continuous fuel supply to the injector. Make driver's driving safer and more comfortable Replacement Part Number: Electric fuel pump assembly replacement for 21608511, 21545138, 3594444, 3861355, 3860210. Please find the product you need accurately according to the OE number. Fitment:  Volvo Penta 4.3GXI, 4.3OSI, 5.0GXI, 5.0OSI, 5.7OSXI, 5.7OSI, 5.7GI, 4.3L, 5.0L, 5.7L. 100% Satisfaction Guaranteed With Every Order. MONEY BACK GUARANTEE We want you to be 100% satisfied with the products you buy from us. If for ANY reason you are not satisfied with your purchase, we offer an iron-clad money back guarantee. Buying online can be a daunting task, so we want you to realize that there is absolutely ZERO risk in buying something and trying it out. If you don’t like it, we’ll make it right… It’s our promise!

Read more less

1.Before purchase: There are 3 leds in your refrigerator.ceiling(w10515058 main led light), mid section of the cooler side(w10515057),freezer side(w10515057).Any of the leds are defective, all three will NOT work.If this part not work,that means this three may have short circuit. Please to buy another 2 pieces of W10515057 and replace all three to have working leds.2.Replacement for:W10515057, W10398007, PS11755866,AP6022533,EAP11755866.3.Compatible Models:WRS325FDAT02, WRS325FDAM02, WRS325FDAM04 WRS325FDAM01, WRS331FDDB01, WRS331FDDW01, WRS331FDDM01.4.Compatible Models:10641122213, 10641122211 10641122212, 10641122210.5.NOTE:Make sure to DISCONNECT the refrigerator power supply before replacing the led board.

Read more less

1.Before purchase: There are 3 leds in your refrigerator.ceiling(w10515058 main led light), mid section of the cooler side(w10515057),freezer side(w10515057).Any of the leds are defective, all three will NOT work.If this part not work,that means this three may have short circuit. Please to buy another 2 pieces of W10515057 and replace all three to have working leds.2.W10515058 led light driver replaces these part numbers - WPW10515058,W10522611,W10465957,WPW10515058VP,PS11755867,AP6022534,30211423.W10515057 led light driver replaces these part numbers - W10515057, W10398007, PS11755866,AP6022533,EAP11755866. 4.Simple installation: DiSimple installation: Directly replace the old circuit board inside your original plastic cover(our package no plastic cover include). It will effectively solve common lighting issues in your fridge, such as flickering or dimming lights. Always unplug your fridge before attempting any repairs.5.Package includes:1* W10515058 led light driver and 2* W10515057 led light drivers.

Read more less

1.Before purchase: There are 3 leds in your refrigerator.ceiling(w10515058 main led light), mid section of the cooler side(w10515057),freezer side(w10515057).Any of the leds are defective, all three will NOT work.If this part not work,that means this three may have short circuit. Please to buy another 2 pieces of W10515057 and replace all three to have working leds.By replacing the driver, you can avoid the expense of hiring a repair technician or purchasing a new fridge.2.Replaces parts: W10515058 led light driver replaces these part numbers - WPW10515058,W10522611,W10465957,WPW10515058VP,PS11755867,AP6022534,30211423.Compatible models: WRS322FDAB,WRS322FDAD,WRS322FDAM,WRS322FDAT,WRS322FDAW,WRS322FNAB,WRS322FNAE,WRS322FNAH,WRS322FNAM,WRS325FDAB,WRS325FDAD,WRS325FDAM,WRS325FDAT,WRS325FDAW,WRS325FNAB 4.Compatible models: WRS325FNAE,WRS325FNAH,WRS325FNAM,WRS331FDDB,WRS331FDDM,WRS331FDDW,WRS335FDDB,WRS335FDDM.8MSF25,MSF21,MSF22,MSF25,MSF2127,1065,10645.Simple installation: Directly replace the old circuit board inside your original plastic cover(our package no plastic cover include). It will effectively solve common lighting issues in your fridge, such as flickering or dimming lights. Always unplug your fridge before attempting any repairs.

Read more less

LED Upgrade: Upgrade your refrigerator lighting with the compatible LED light Board (W10843353) for flicker-free, bright illumination. Not compatible with W11483116, W10695459, 4961291, or AP6990551. Say goodbye to dim or non-illuminating lights - replace now for improved visibility.Replacement Part: W10695459, W11205083, W11126053, W10660728, W10843353, W10279030.Compatible Models: W10412708, W10279030, W10660728, W10843353, W11126053, W11205083, 4259980A, P5971112, EAP11702378, PS11702378 refrigerator LED light board module.Durable Performance: The W10843353 LED Light Board is built to last. It is made from high-quality materials that are resistant to wear and tear, ensuring a long service life. so you won't have to worry about frequent replacements.Easy Installation: Direct replace your old or faulty light board,saving you time and effort.Only led PCB board include without plastic cover.

Read more less

1.Replacement Required: If your refrigerator led lights flicker, dim or not illuminate,you can choose this.Our led light board matches the original natural white light,perfectly solve the above problems,bring new visual effects.2.Part Number: Replace W11043011, AP6047972, W10866538, PS12070396, W10866538 Refrigerator LED Light Board.3.Compatible Models: WRF555SDHV01,WRF555SDHW00,WRX735SDHZ00,WRX735SDBM04,WRX735SDHW00,MFI2570FEZ06,MFI2570FEB01,AFI2539ERB02,AFI2539ERM03,AFI2539ERW02,WRX7 4.Compatible Models: WRF555SDHB00,WRF555SDHV02,WRX735SDHV00,WRX735SDBE02,MFI2570FEZ05,MFI2570FEZ04,MFI2570FEZ03,WRX735SDBH02, IX7DDEXGZ002, MFI2570FEW01, IX7DDEXGZ0015.PCB Board Only: No white plastic housing include,just snap the new board into your existing plastic housing.

Read more less

{Widely Application} Pool vacuum vac locks perfect for suction pool cleaners W400BWHP, W400BBKP, W400BLGP, GW9530, K12500{Material Reliable} Pool vacuum connectors made of high quality plastic material with strong spring to keep it closed.Smooth surface,sturdy and wear resistant material not easy snap for long term use.{Easy to Install} Perfect fit 1-1/2" female threaded suction port.{Safety Device} Important Safety Device to Prevent Suction of Swimmers' Hair ,or keeps little ones from being sucked & stuck into the wall.{Notices} Before purchase,please make sure your model.

Read more less

🔧 3-Second Problem Solver » Fix "Washing Machine Leaks When Agitating" & Noisy Grinding in Whirlpool/Maytag Washers » Ends Maytag Bravos Drive Hub Wobbling with Triple-Lock Zinc Alloy Structure ✅ Perfect Fit Guarantee » Direct Whirlpool Cabrio Washer Basket Replacement (W10291415 Series) » Solves "Drive Hub Wobbling" on Maytag Bravos Models (EA2581262/PS2581262 Compatible) ⚙️ OEM-Level Engineering » CNC-Machined Teeth Prevent Agitation Leaks (Seal-Tight Fit for 2.5" Shafts) » 0.02mm Precision Eliminates Bravos Series Wobble in 98% Test Cases 🛠️Easy To Install » Simply connect the accessories to the pivot of the laundry basket, tighten and secure them, and you can easily install them.

Read more less