Carburetor

1.OEM Part Number: 698781.2.Applicable models: float bowl gasket, briggs, briggs S, gasket-float bowl，hipa, nikki carb rebuild kit, briggs and stratton.Grooves suitable for nylon fuel transfer tube assembly.3.Material:The product is made of rubber material, smooth and durable, with good sealing performance.4.Note: The diameter of the float bowl washer is approximately 53 millimeters/2.09 inches, and the diameter of the O-ring is approximately 8 millimeters/0.31 inches.5.Package Includes:5*Carburetor Float Bowl Gasket,10 * Seals O-Ring.

Read more less

1.Fitment:698781 Carburetor Float Bowl Gasket for Nikki Carbs Briggs & Stratton.2.Replaces Part number:Briggs & Stratton 698781.3.Attention:This gasket has a separate o-ring inlet seal,Fits in grooves formed into the nylon fuel transfer tube assembly.DOES NOT FIT 695426,which the carburetor has the gasket groove cast into the metal carburetor body.4.Package Includes:1 x Carburetor Float Bowl Gasket,2 x Seals O-Ring.5.Notice:There are hunderds engine models the product can fit,we cannot list them here,so if you cannot sure whether your engine fits ours,please contact us by e-mail.We would solve the problem ASAP.

Read more less

1.Fitment:Honda 1979-1984 CB900F/F2 Bol d'Or,Honda 1981-1982 CB900F Super Sport,Honda 1980-1982 CB900C Custom,Honda 1983 CB1000C Custom,Honda 1983 CB1100F Super Sport.2.Replaces OEM part number:16211-438-000,16212-438-000,16213-438-000,16214-438-000.3.Function:The boots are used to connect the carburetor to the intake manifold.4.Package Includes:Set of 4 rubber carburetor manifold boots without clamps as picture showed.5.Size:Manifold side I.D.:39mm,Carburetor side I.D.:43mm.

Read more less

Fitment: Fits for 1P902-0129-B1, 11P902-0129-B2, 11P902-0129-B3, 11P902-0130-B1, 11P902-0131-B1, 111P02-0002-F1, 111P02-0004-F1, 111P02-0113-F1, 111P02-0114-F1 Engine. Replaces part number: 594287, 796608, 799248 carburetor thermostat gaskets engines. Function: Maintain high performance operation of outdoor power equipment. Material: Made of cast iron material, durable and extends its service life. Package included: 1*Carburetor, 3*Gaskets, 1*O-Ring. This product does not include instructions.

Read more less

The item is for one new Arctic Cat carburetor primer cover assy.Part number:4505-050.FITS:1998 400, 454, 5001999 400, 5002000 400, 5002001 400, 500

Read more less

1.[Fitment]: Carburetor for weber 40mm carb 2 barrel Beetle Car.2.[Product parameters]: 40 IDF 2 Barrel Carb Carburetor Carburetor 40mm (Instructions not included but easy to install).3.[Package includes]:1 * Carburetor(Golden), 2 * Mounting Gaskets,1*Metal Material Fuel Filter,1*Fuel Line,4*Clamps and other accessory.(This product is a fuel filter made of metal.).4.[Function]: This carburetor product aims to improve the performance of vehicles by improving the delivery of fuel and air mixtures.5.[Material]: The carburetor is made of high-quality materials and has a durable structure, ensuring long-term use and reliable performance.

Read more less

[OEM Part Number]：9-37107 18-7222 18-7042 398729 396701 39206 [Fitment]: 18hp 1970 & Newer；20hp 1970 & Newer ；25hp 1970 & Newer；28hp 1976 & Newer；30hp 1977 & Newer ； 35hp 1978 & Newer ；40hp 2 Cyl 1979 & Newer；40hp Comm 1979 & Newer ；45hp 2 Cyl 1972 & Newer； 48hp 2 Cyl 1973 & Newer ；50hp 2 Cyl 1974 & Newer ， 50hp 3 Cyl 1972 & Newer ；55hp 2 Cyl 1975 & Newer ，55hp 3 Cyl 1970-1969； 60hp 2 Cyl 1980-1985，60hp 3 Cyl 1970-1971 ， 60hp 3 Cyl 1973 & Newer ； 65hp 3 Cyl 1974 & Newer ； 70hp 3 Cyl 1975 & Newer； 75hp 3 Cyl 1975-1988. [Note]: To find the right repair kit for your carburetor quickly and correctly, please check if we match your item before purchasing. [Function]: Directly replace the old parts of your carburetor to help keep the carburetor in the best condition. [Package includes]:3 * Carburetor Repair Kit .All kits pictured are present in the package and each kit is complete as shown. Includes float, needle, valve seat and premium gasket to restore your carburetor to peak performance.(No manual)

Read more less

1.Fits:Briggs & Stratton 693480 693479 694056.2.Replaces Briggs:499306,495181,495026,491429,393297,399623,392806,393286,393293.3.Replaces Briggs:394338,394503,394352,394505,396634,397245,398107,399229,491535,491427.4.Also Fits Briggs&Stratton opposed twin 4 screw fuel pump carb 692815 20 HP.

Read more less

1.【Fitment】Replacement for Mercruiser Stern Drive, Mercury Marine. This unit will work on all 4 cylinder engines 2.5 and 3.0 originally equipped with the 2 barrel Mercarb make your boat run the way it should.2.【Replaces】OEM #3310-864940A01.3.【Material】It is made of aluminum alloy, wear-resistant and long service life. Base bolt pattern is 3 3/4 x 2 inches.4.【Function】The carburetor uses the kinetic energy of the intake air flow to realize the atomization of gasoline. According to the requirements of different working conditions of the engine, the carburetor automatically proportions the corresponding concentration and outputs the corresponding amount of mixture, so that the mixture is evenly mixed, which provides power for the start and operation of the ship. 5.【Advantage】This new carburetor is an improved version of the original. We have fixed all of the issues with the original units: The Dead spot (The Bog) on hard acceleration, Fixed with Alcohol Resistant Pump. No More Vacuum leaks at the base plate from worn out flaps. Choke Flaps now have air gaps for better cold start. Interchangeable fuel inlet design.

Read more less

1.Fitment: Replacement for Mercruiser Stern Drive, Mercury Marine. This unit will work on all 4 cylinder engines 2.5 and 3.0 originally equipped with the 2 barrel Mercarb make your boat run the way it should.2.Replaces: OEM #3310-864940A01.3.Material: It is made of aluminum alloy, wear-resistant and long service life. Base bolt pattern is 3 3/4 x 2 inches. 4.Function: The carburetor uses the kinetic energy of the intake air flow to realize the atomization of gasoline. According to the requirements of different working conditions of the engine, the carburetor automatically proportions the corresponding concentration and outputs the corresponding amount of mixture, so that the mixture is evenly mixed, which provides power for the start and operation of the ship.5.Note:If you encounter the problem that the idle speed is difficult to adjust due to too loose throttle connecting rod during use, please contact us in time.

Read more less

1.【Fitment】This unit is applicable to all V6 4.3L Engines originally equipped with 2-Cylinder Mercarb Mercruiser Boats.2.【Replace Part Number】Replaces Stock 2 Barrel Mercarb 3310-807764A1.3.【Material】The carburetor is made of high-quality materials, wear-resistant and durable, and the foundation bolt type is 3 / 4 x 2 inches.4.【Function】The carburetor uses the kinetic energy of the intake air flow to realize the atomization of gasoline. According to the requirements of different working conditions of the engine, the carburetor automatically proportions the corresponding concentration and outputs the corresponding amount of mixture, so that the mixture is evenly mixed, which provides power for the start and operation of the ship.5.【Note】This product does not contain instructions. If you have any questions about this product, you can contact us in time.

Read more less

1.【Fitment】This unit is applicable to all V6 4.3L Engines originally equipped with 2-Cylinder Mercarb Mercruiser Boats.2.【Replace Part Number】Replaces Stock 2 Barrel Mercarb 3310-807764A1.3.【Material】The carburetor is made of high-quality materials, wear-resistant and durable, and the foundation bolt type is 3 / 4 x 2 inches.4.【Function】The carburetor uses the kinetic energy of the intake air flow to realize the atomization of gasoline. According to the requirements of different working conditions of the engine, the carburetor automatically proportions the corresponding concentration and outputs the corresponding amount of mixture, so that the mixture is evenly mixed, which provides power for the start and operation of the ship.5.【Note】This product does not contain instructions. If you have any questions about this product, you can contact us in time.

Read more less

This item for sale is an excellent condition used Venturi for Mercruiser TKS carburetors.Mercury Marine/Mercruiser PN: 3302-850423001 Fits Mercruiser TKS engines:3.0L (181ci) GM Serial Numbers 1G404114 & Up3.0L (181ci) GM Serial Numbers 0L097000 Thru Serial Numbers 0W3019993.0L (181ci) GM Serial Numbers 0W302000 Thru 1A00199993.0L (181ci) GM Serial Numbers 1A002000 Thru 1A0205433.0L (181ci) GM Serial Numbers 1A020544 & Up

Read more less

1.This kit works on all mercarb 2 BBL carburetor.2.Kit for Mercury Marine 3310-861448A1,3310-864940A01,3310-864941A01,3310-864942A01,3310-864943A01,3310-866140A02,3310-866141A02,3310-866142A03.3.It does come with everything as shown in the picture.

Read more less

1.Fit:Quick Fuel 3-200 Holley 4160 Carburetor.2.Fit:390 600 750 CFM,such as 1841849,1850,3310,6619,6909,8007,9834,80457,80463,80508, 80529.3.Fit:ROAD DEMON JR tm,ROAD DEMON tm,and vacuum secondary SPEED DEMON tm.4.Includes:O-rings,pump diaphragm,needle and seat,and power valve.5.Replace:Barry Grant kit P/N 190003 and Holley kits P/N 37-119,37-720,37-754,37-1542.

Read more less

1.Fits Yamaha BLASTER YFS200 1988-2006.2.Replaces OEM number:2XJ-13565-00-00.3.Package includes a set of 2 carburetor intake manifold boots.4.Original quality and durable quality, it fits well.Installation and disassembly are very convenient. Please confirm the model before purchasing.

Read more less

1.Fitment: Perfect fits for Hon-da 1997-2001 TRX250, TRX250 Recon, 2001-2005 TRX250EX Sportrax 250, 2002-2007 TRX250TE, TRX250TM Recon ES, 2003-2014 CFR150F. ATV Go-Karts Dirt Bike CG 150cc, 200cc, 250cc ( Not compatible with GY6 motors ), Taotao, Buyang, Lifan, Kazuma, Sunl, Zongshen.2.Function: The carburetor can mix fuel and air nicely to help provide optimum engine performance, keep the engine running smoothly and prevent the engine from running out of fuel or overflowing.3.Carburetor Size: Inlet inner diameter: 27mm/1.06inch. Inside diameter of air filter: 35mm/1.38inch. Outer diameter of air filter: 38mm/1.5inch. Distance between bolt holes: 48mm/1.89inch.4.Material: Made of high quality aluminum alloy material, so that is durable, sturdy and long service life. Goof working condition and easy to install.5.Package Include: 1 x PZ27 carburetor, 1 x air filter. Please confirm your vehicle model before placing an order.

Read more less

1.Fits Harley-Davidson Carburetors,Super Carburetor Master Rebuild Kit.2.Rebuild kits are available in master kits, body-only kits and accelerator pump kits, with Keihin CV 27006-88.3.Replacement pads, O-rings and components are made from the highest-quality materials available.4.Carburetor Rebuild Kit for Harley 1990-2006 Big Twin or 1988-2006 XL models using the CV carb Repl.Harley #27006-88,for Harley 1990-2006 Big Twin or 1988-2006 XL models using the CV carb.5.Package includes as the picture,please check it

Read more less

1.Fitment: Perfect fits Hon-da ATC185, ATC200,ATC200X,Big Red 200 ATC200E, CB125, CFR100F, TRX250, XR100, XR200R, XL100S, XL125S. GY6 150cc ATV Go-Kart Buggy & Dirt Bike. AIM-EX, Buyang, Coolsort, Kazuma, Roketa, SunL, Taotao. 2.Function: The carburetor can mix fuel and air nicely to help provide optimum engine performance, keep the engine running smoothly and prevent the engine from running out of fuel or overflowing.3.Carburetor Size: Inlet inner diameter: 26mm/1.02inch. Outer diameter of air filter: 42mm/1.65inch. Distance between bolt holes: 48mm/1.89inch.4.Material: Made of high quality aluminum alloy material, so that is durable, sturdy and long service life. Goof working condition and easy to install.5.Package Include: 1 x PZ26 carburetor, 1 x air filter. Please confirm your vehicle model before placing an order.

Read more less

1.Fitment: CV18S CV20S CV22S CV725 CV725S Engines CV18-61510, CV20-65501, CV20-65511, CV20-65514, CV20-65515, CV18-61501, CV18-61510,CV18-61512, CV18-61513, CV18-61516, CV18S-61569, CV20-65501, CV20-65511, CV20-65514,CV20-65515.2.Replace for CV18S CV20S CV22S CV725 Command Engine 24 853 255-S 24 24 053 50-S 24 853 50-S 24 853 43-S.3.Replacement for 2485332-S 2485335-S engine carb.4.Please check your part with our picture and part number before purchase to ensure that the part conforms to your model.5.Package includes:1x carburetor(As shown in the picture).

Read more less

1.Fitments:Carburetor for Toyota 22R.2.Replaces part number:21100-35520,2110035520.3.Function:Can directly replace the old/broken carburetor,Add 5-10% Horsepower.4.Type of Choke:Electric choke.5.Package includes:1 x carburetor for Toyota 22R.

Read more less

1.Fitment:Carburetor Fit For Toyota 22R Engine,1988-1990 Pickup,1981-1988 Hilux,1981-1984 Celica,1984-1988 4runner.2.Replaces part number:21100-35463,21100-35570,TOY-507,2110035463,2110035570.3.Package includes:1 x carburetor for Toyota 22R with square plug.4.Feature:Replacement and maintenance carburetor parts. To keep your outdoor power equipment running at peak performance.Add 5~10% horsepower and maintain fuel mileage close to new truck.5.Other details:For Toyota 22R 2.4L 2366CC l4 GAS SOHC Naturally Aspirated.Will not work for engines with dual row timing chain (81-83).

Read more less

[Material]: Aluminum. [Function]: The carburetor has an optimized street calibration function. Factory preset electric choke for easy startups. [Features]: Vibration polishing, beautiful, bright finish. [Product parameters]: Specification: double tube carburetor CFM:350 Main nozzle: 61 Main force valve: 8.5 Main pump nozzle size: 28 Choke: electric Vacuum port: 1 timing (spark) port and 1 PCV port [Package includes]: Carburetor, oil filter, metering nozzle, throttle wire, oil pipe and other necessary parts. (Without Instructions)

Read more less

1.[Fitment]:Suitable for small and large engines, either biplane or single plane intake manifolds.Including EPS, RPM, RPM Air Gap, Torker II and other similar design brands.2.[Function]: The product has the calibration function, which can improve the idling and cruising performance of the vehicle and achieve a smooth transition from partial to full throttle.3.[Product parameters]: The main Jet is 0.101 inches, and the secondary Jet is 0.098 inches.Primary Bore 1.44; Secondary Bore 1.75.4.[Note]: Choke:Electric Carburetor Flange:Square bore Carburetor Color:Satin Booster Type:Annular Throttle Linkage Type:Universal.5.[Package includes]:1*carburetor,2*fuel filter,1*fuel line,1*Air cleaner stud,4*clamps,1*Red choke positive wire,1*Black choke ground wire ,1*Square-bore base gasket,1*Air horn gasket,1*Hex nut,2*Vacuum caps,1*Vacuum “T”,1*Throttle cable ball end stud.Other necessary components.

Read more less