Description
4036ER2004A 4036ER4001B Front Load Washer Tub Bearings and Seal Kit — LG Kenmore Sears
Is your front-load washer roaring like a jet engine during the spin cycle? That's the sound of failed tub bearings — and ignoring it leads to shaft damage, water leaks, and eventually a dead washer. The iFJF 4036ER2004A / 4036ER4001B Tub Bearing and Seal Kit is a complete OEM-spec replacement set that restores smooth, quiet operation to your LG, Kenmore, or Sears front-load washer. Precision-manufactured with high-grade bearing steel, proper heat treatment, and factory pre-lubrication. Complete kit includes both bearings, the water seal, and all necessary hardware — everything you need for a full tub bearing replacement at a fraction of the cost of a new machine.
Key Features
-
Complete Kit: Both bearings, water seal, and hardware in one package — no hunting for separate parts numbers.
-
OEM-Grade Precision: Bearings manufactured to the same tolerances and material specifications as factory LG/Kenmore components. No adapter plates or modifications needed.
-
High-Grade Bearing Steel: Properly heat-treated for hardness and wear resistance. Withstands years of high-RPM spin cycles without brinelling or spalling.
-
Pre-Lubricated: Factory-packed with high-temperature, water-resistant grease — ready to install. No additional lubrication needed on initial install.
-
Complete Water Seal: Triple-lip seal design prevents water and detergent intrusion — the #1 cause of premature bearing failure in front-load washers.
-
Cost-Effective Repair: Save $500-$1,200 vs. a new washer or professional repair. This is a ~$45 fix vs. replacement.
Compatibility
| Brand |
Part Numbers |
Models |
| LG |
4036ER2004A, 4036ER4001B |
Most LG front-load washers using these bearing numbers |
| Kenmore |
4036ER2004A, 4036ER4001B |
Kenmore front-load washers manufactured by LG |
| Sears |
4036ER2004A, 4036ER4001B |
Sears-branded front-load washers using LG components |
⚠ Verify Compatibility: Your exact washer model number is on a label inside the door, on the back panel, or under the lid. Compare part numbers before ordering. Contact support if unsure.
Specifications
| Specification |
Detail |
| Replacement For |
4036ER2004A, 4036ER4001B |
| Type |
Direct OEM Replacement |
| Condition |
Brand New |
| Material |
High-Grade Bearing Steel / Triple-Lip Seal |
| Pre-Lubricated |
Yes — High-Temp Water-Resistant Grease |
Signs Your Tub Bearings Are Failing
- Loud roaring or grinding noise during spin cycle — gets worse over time
- Excessive drum wobble — drum moves up/down significantly when pressed by hand
- Water leaking from bottom of the washer — failed bearing has damaged the seal
- Metal shavings or rust residue visible below the outer tub
- Washer becomes progressively noisier at lower spin speeds
Installation Tips
-
Skill Level: Intermediate to Advanced — requires full washer disassembly
-
Time: 2-5 hours for first-time DIY
-
Tools: Socket set, screwdrivers, pliers, bearing press or driver kit (DO NOT hammer — it damages bearings)
-
Safety First: UNPLUG the washer and shut off water supply before starting
-
Document: Take photos at every disassembly step — reassembly is the hard part
-
Clean Thoroughly: Remove all old grease, debris, and corrosion from the bearing housing before pressing in new bearings
-
Press, Don't Hammer: Use a bearing press or driver. Hammering damages the precision-ground bearing races and guarantees early failure
Why Choose iFJF?
iFJF bearing kits use the same steel grade and heat treatment as OEM bearings, with an upgraded triple-lip water seal that provides better protection against the detergent-laden water that kills front-load washer bearings. US-based support and fast shipping from our American warehouse.
Related Products
Frequently Asked Questions
Q: Will this kit fit my specific LG washer model?
A: This kit fits LG, Kenmore, and Sears front-load washers that use 4036ER2004A and 4036ER4001B bearing/part numbers. Your washer model number is on a label inside the door or on the back panel. Contact support with your model number for verification.
Q: What's included in the kit?
A: Both tub bearings, the water seal, and all necessary mounting hardware. Everything needed for a complete tub bearing replacement.
Q: Do I need special tools?
A: A bearing press or bearing driver set is strongly recommended. Hammering bearings into place damages the races and causes premature failure. Many auto parts stores rent bearing press kits.
Q: How long do these bearings last?
A: Comparable to OEM bearings when properly installed — typically 5-10 years of normal use. The upgraded triple-lip water seal provides better protection against the #1 failure cause: water/detergent intrusion.
Q: Is it worth fixing or should I buy a new washer?
A: This kit costs ~$45 vs. $500-$1,200 for a new front-load washer. If your washer's electronics and drum are otherwise in good condition, bearing replacement is highly cost-effective.
Q: Can I run the washer while waiting for parts?
A: We strongly advise against it. Running on failed bearings can damage the shaft, spider arm, and outer tub — turning a $45 bearing job into a much more expensive repair.
📚 Related Guides & Articles
