Description
Product Overview
The 4560 1-1/4" to 1-1/2" Pool Filter Hose Conversion Kit for Filter Pump — Set A is a precision-engineered replacement part designed to restore proper function and stop leaks in your pool or spa equipment. Manufactured to meet or exceed OEM specifications, this component delivers reliable, long-lasting performance at a fraction of the dealer price.
Pool equipment operates in a harsh environment — constant exposure to chlorinated water, UV radiation, temperature swings, and pressure cycles. When seals, O-rings, and internal components degrade, the result is leaks, poor filtration, and higher operating costs.
Key Features
-
OEM-Spec Precision: Manufactured to exact dimensional tolerances for guaranteed fit without modifications.
-
Chemical-Resistant Materials: EPDM, Viton, or chemical-grade polymers resist degradation from chlorine, bromine, salt, and UV.
-
Extended Service Life: Premium materials deliver 2-3x the service life of economy alternatives.
-
Easy DIY Installation: Straightforward replacement with basic hand tools — most jobs take 15-30 minutes.
-
Value Pack Savings: Multi-pack options available — stock up and save vs buying singles when applicable.
Compatibility
| Specification |
Detail |
| Replaces Part # |
4560 |
| Material |
EPDM Rubber / Engineered Polymer |
| Application |
Residential & Light Commercial Pool/Spa |
When to Replace
-
Visible Leaks: Water seeping from connections or housings = failed seal or gasket
-
Decreased Performance: Reduced flow, poor filtration = worn internal components
-
Unusual Noise: Grinding or squealing = worn bearings, gears, or impellers
-
Age: Rubber seals should be replaced every 2-3 years as preventive maintenance
-
Hard/Cracked Rubber: O-rings that feel hard or show surface cracks no longer seal properly
Installation Tips
-
Turn Off Equipment: Switch off at circuit breaker before working on pool equipment.
-
Release Pressure: Open air relief valve on filter to release system pressure.
-
Clean All Surfaces: Remove old gasket material and debris — clean surface = proper seal.
-
Use Proper Lubricant: Silicone-based pool lube only. NEVER use petroleum jelly — it destroys EPDM.
-
Tighten Evenly: Cross-pattern tightening for multi-bolt connections.
-
Test Before Full Operation: Run briefly and check all connections.
Frequently Asked Questions
Q: What is the difference between Set A and Set B?
A: Set A covers one pump-to-filter connection (suction or return side). Set B covers the other. Most above-ground pool filter pumps need BOTH Set A and Set B for complete 1-1/4 to 1-1/2 inch conversion. Check which connections you need.
Q: Why upgrade to 1-1/2 inch hoses?
A: Larger diameter reduces flow restriction: better circulation, improved filtration, less pump strain, potentially lower electricity costs. 1-1/2 inch can improve flow rate 15-20% vs 1-1/4 inch on same pump.
Q: Will this fit my Intex pool pump?
A: Yes, compatible with most Intex filter pump models (1000-4000 GPH) with 1-1/4 inch threaded connections. Also fits Bestway, Coleman, and generic above-ground filter pumps. Verify 1-1/4 inch threaded port.
Q: Do I need Teflon tape?
A: Kit includes rubber gaskets for sealing — Teflon tape not required on adapter threads. However, applying silicone pool lubricant to gasket helps sealing and prevents binding. Hand-tighten firmly but do not over-tighten.
Related Products
Related Guides & Articles
