Description
Product Overview
The 5-Pack 9-100-3105 Pool Cleaner Sweep Tail Hose Scrubber for Polaris 180/280 is a precision-engineered replacement part designed to restore proper function and stop leaks in your pool or spa equipment. Manufactured to meet or exceed OEM specifications, this component delivers reliable, long-lasting performance at a fraction of the dealer price.
Pool equipment operates in a harsh environment — constant exposure to chlorinated water, UV radiation, temperature swings, and pressure cycles. When seals, O-rings, and internal components degrade, the result is leaks, poor filtration, and higher operating costs.
Key Features
-
OEM-Spec Precision: Manufactured to exact dimensional tolerances for guaranteed fit without modifications.
-
Chemical-Resistant Materials: EPDM, Viton, or chemical-grade polymers resist degradation from chlorine, bromine, salt, and UV.
-
Extended Service Life: Premium materials deliver 2-3x the service life of economy alternatives.
-
Easy DIY Installation: Straightforward replacement with basic hand tools — most jobs take 15-30 minutes.
-
Value Pack Savings: Multi-pack options available — stock up and save vs buying singles when applicable.
Compatibility
| Specification |
Detail |
| Brand |
Polaris Automatic Pool Cleaners |
| Replaces Part # |
9-100-3105 |
| Material |
EPDM Rubber / Engineered Polymer |
| Application |
Residential & Light Commercial Pool/Spa |
When to Replace
-
Visible Leaks: Water seeping from connections or housings = failed seal or gasket
-
Decreased Performance: Reduced flow, poor filtration = worn internal components
-
Unusual Noise: Grinding or squealing = worn bearings, gears, or impellers
-
Age: Rubber seals should be replaced every 2-3 years as preventive maintenance
-
Hard/Cracked Rubber: O-rings that feel hard or show surface cracks no longer seal properly
Installation Tips
-
Turn Off Equipment: Switch off at circuit breaker before working on pool equipment.
-
Release Pressure: Open air relief valve on filter to release system pressure.
-
Clean All Surfaces: Remove old gasket material and debris — clean surface = proper seal.
-
Use Proper Lubricant: Silicone-based pool lube only. NEVER use petroleum jelly — it destroys EPDM.
-
Tighten Evenly: Cross-pattern tightening for multi-bolt connections.
-
Test Before Full Operation: Run briefly and check all connections.
Frequently Asked Questions
Q: How many scrubbers does one Polaris 280 need?
A: Standard Polaris 280 sweep hose uses 3-4 scrubbers depending on hose length. 5-pack covers one complete replacement with 1-2 spares. Spread evenly along sweep hose for balanced protection.
Q: How do I install these?
A: 1) Remove old scrubbers 2) Open new scrubber along split seam 3) Wrap around hose at desired position 4) Press firmly until clip snaps closed. No tools. Space scrubbers 12-18 inches apart for even wall protection.
Q: How long do they last?
A: Typically 6-12 months in normal residential use depending on cleaner runtime, water chemistry, and sun exposure. Replace when foam thins, cracks, or no longer stays clipped. High chlorine accelerates wear.
Q: Will these fit aftermarket sweep hoses?
A: Yes if aftermarket hose has same OD as OEM Polaris hose (~1 inch). Scrubber wraps around and clips to itself — slight diameter variations accommodated. Thicker hoses may need slight stretching during install.
Related Products
Related Guides & Articles
