Description
Product Overview
The 6 Port Module with Valve Shell O-Ring for Paramount Pool Systems 004302440800 is a precision-engineered replacement part designed to restore proper function and stop leaks in your pool or spa equipment. Manufactured to meet or exceed OEM specifications, this component delivers reliable, long-lasting performance at a fraction of the dealer price.
Pool equipment operates in a harsh environment — constant exposure to chlorinated water, UV radiation, temperature swings, and pressure cycles. When seals, O-rings, and internal components degrade, the result is leaks, poor filtration, and higher operating costs.
Key Features
-
OEM-Spec Precision: Manufactured to exact dimensional tolerances for guaranteed fit without modifications.
-
Chemical-Resistant Materials: EPDM, Viton, or chemical-grade polymers resist degradation from chlorine, bromine, salt, and UV.
-
Extended Service Life: Premium materials deliver 2-3x the service life of economy alternatives.
-
Easy DIY Installation: Straightforward replacement with basic hand tools — most jobs take 15-30 minutes.
-
Value Pack Savings: Multi-pack options available — stock up and save vs buying singles when applicable.
Compatibility
| Specification |
Detail |
| Brand |
Paramount In-Floor Cleaning Systems |
| Replaces Part # |
004302440800, 004-302-440-800 |
| Material |
EPDM Rubber / Engineered Polymer |
| Application |
Residential & Light Commercial Pool/Spa |
When to Replace
-
Visible Leaks: Water seeping from connections or housings = failed seal or gasket
-
Decreased Performance: Reduced flow, poor filtration = worn internal components
-
Unusual Noise: Grinding or squealing = worn bearings, gears, or impellers
-
Age: Rubber seals should be replaced every 2-3 years as preventive maintenance
-
Hard/Cracked Rubber: O-rings that feel hard or show surface cracks no longer seal properly
Installation Tips
-
Turn Off Equipment: Switch off at circuit breaker before working on pool equipment.
-
Release Pressure: Open air relief valve on filter to release system pressure.
-
Clean All Surfaces: Remove old gasket material and debris — clean surface = proper seal.
-
Use Proper Lubricant: Silicone-based pool lube only. NEVER use petroleum jelly — it destroys EPDM.
-
Tighten Evenly: Cross-pattern tightening for multi-bolt connections.
-
Test Before Full Operation: Run briefly and check all connections.
Frequently Asked Questions
Q: How do I know if my 6-port module needs replacement?
A: Symptoms: pop-up heads staying up or not popping up, uneven cleaning coverage, gear grinding noise from valve, water leaking from housing, pop-ups cycling wrong order. If cleaning coverage decreased noticeably, module gears are likely worn.
Q: Is this genuine Paramount?
A: Premium aftermarket replacement manufactured to meet or exceed Paramount OEM specifications. Fully compatible with Paramount PCC-2000, PV3, and Cyclean in-floor systems using 004302440800 module.
Q: Can I install this myself?
A: Yes — straightforward DIY. 1) Turn off pump 2) Remove valve lid (6-8 screws) 3) Lift out old module 4) Install new O-ring on valve shell 5) Drop in new module aligning drive pin 6) Replace lid evenly 7) Run pump to test. 15-20 minutes.
Q: Will this fit older Paramount systems?
A: Fits Paramount in-floor systems from 1990s through current models using 6-port water distribution valve. Compatible with PCC-2000, PV3, Cyclean, and SDX. If your system uses 8-port valve, this is NOT compatible.
Related Products
Related Guides & Articles
