iFJF Adjustable Roll Bar Fire Extinguisher Holder for Jeep Wrangler JK 2007-2018 - 3lb Black

Description

Trail-Ready Fire Extinguisher Mount for Jeep Wrangler JK

The iFJF Adjustable Roll Bar Fire Extinguisher Holder provides a secure, quick-access mounting solution for your Jeep Wrangler JK (2007–2018). Whether you're hitting the trails, overlanding, or just want peace of mind on the road, this mount keeps a 3lb fire extinguisher within arm's reach at all times. Engineered specifically for the JK's roll bar diameter, this holder features a fully adjustable clamp design that grips firmly without scratching or damaging your roll bar's finish.

Key Features

  • Adjustable Roll Bar Fit — Compatible with Jeep Wrangler JK (2007–2018) 2-door and 4-door Unlimited roll bars
  • 3lb Fire Extinguisher Capacity — Fits standard 3lb automotive fire extinguishers (extinguisher sold separately)
  • Quick-Release Design — Rapid access in emergencies; no fumbling with straps or buckles
  • Heavy-Duty Powder-Coated Steel — Black finish resists rust, corrosion, and UV damage
  • No-Drill Installation — Clamps directly onto roll bar; no permanent modifications required
  • Rubber-Lined Clamps — Prevents scratching and provides vibration-dampening grip
  • 360-Degree Adjustable Mounting Angle — Position the extinguisher for optimal accessibility

Vehicle Compatibility

  • Jeep Wrangler JK — 2007–2018 (2-door and 4-door Unlimited)
  • Fits factory and most aftermarket roll bars
  • Compatible with hard top and soft top configurations

Why Carry a Fire Extinguisher Off-Road?

Vehicle fires can happen anywhere, but they're especially dangerous on remote trails where emergency services are far away. Common off-road fire hazards include fuel leaks, electrical shorts from aftermarket accessories, overheated brakes igniting dry brush, and catalytic converter contact with tall grass. A properly mounted fire extinguisher gives you critical seconds to respond before a small flame becomes a total loss.

Installation Guide

  1. Choose your mounting location on the roll bar — driver or passenger side, front or rear
  2. Loosen the clamp bolts to open the mounting brackets
  3. Position brackets around the roll bar at your desired angle
  4. Tighten bolts evenly until the holder is secure — do not overtighten
  5. Insert your 3lb fire extinguisher into the cradle and secure the quick-release strap
  6. Test that the extinguisher can be removed quickly and easily

Frequently Asked Questions

Q: Does this come with a fire extinguisher?
A: No, this listing is for the mounting bracket only. You'll need a standard 3lb automotive fire extinguisher (sold separately).

Q: Will this fit a 4-door JK Unlimited?
A: Yes! The roll bar diameter is the same on both 2-door and 4-door (Unlimited) Wrangler JK models from 2007–2018.

Q: Can I install this on the driver or passenger side?
A: Yes. The mount is fully reversible and 360-degree adjustable — install it wherever provides the quickest access for you.

Q: Will this scratch my roll bar?
A: No. The clamps feature rubber-lined contact surfaces that protect your roll bar's paint or powder coat finish.

Q: Is this legal for on-road use?
A: Yes. Carrying a fire extinguisher is legal and recommended in all 50 states. It's also required equipment for many organized off-road events.

Related Products

Complete your build with these complementary iFJF products:

Frequently Asked Questions

Q: Will this fit my 2007-2018 Wrangler?
A: Designed for 2007-2018 Jeep Wrangler Wrangler. Verify your exact year and model (2-door vs 4-door) before ordering.

Q: Is installation difficult?
A: Most Jeep accessories are designed for DIY installation with basic hand tools. Average install time is 15-45 minutes.

Q: What material is this made from?
A: Manufactured from high-grade materials including billet aluminum, stainless steel, and UV-resistant polymers selected for off-road durability.

Q: Is this compatible with aftermarket modifications?
A: Most accessories work with stock and mildly modified Wranglers. For extensive modifications, verify fitment with product dimensions.

Q: How does this compare to OEM?
A: iFJF aftermarket accessories match or exceed OEM quality at a more accessible price point with rigorous quality control for harsh off-road conditions.

Q: What is the warranty?
A: All iFJF products come with a 1-year warranty against manufacturing defects.

🔧 Related Products

📖 Helpful Resources

iFJF Adjustable Roll Bar Fire Extinguisher Holder for Jeep Wrangler JK 2007-2018 - 3lb Black

Product form

SKU: FJ-FIREH-CK

$39.99

      Description

      Trail-Ready Fire Extinguisher Mount for Jeep Wrangler JK

      The iFJF Adjustable Roll Bar Fire Extinguisher Holder provides a secure, quick-access mounting solution for your Jeep Wrangler JK (2007–2018). Whether you're hitting the trails, overlanding, or just want peace of mind on the road, this mount keeps a 3lb fire extinguisher within arm's reach at all times. Engineered specifically for the JK's roll bar diameter, this holder features a fully adjustable clamp design that grips firmly without scratching or damaging your roll bar's finish.

      Key Features

      • Adjustable Roll Bar Fit — Compatible with Jeep Wrangler JK (2007–2018) 2-door and 4-door Unlimited roll bars
      • 3lb Fire Extinguisher Capacity — Fits standard 3lb automotive fire extinguishers (extinguisher sold separately)
      • Quick-Release Design — Rapid access in emergencies; no fumbling with straps or buckles
      • Heavy-Duty Powder-Coated Steel — Black finish resists rust, corrosion, and UV damage
      • No-Drill Installation — Clamps directly onto roll bar; no permanent modifications required
      • Rubber-Lined Clamps — Prevents scratching and provides vibration-dampening grip
      • 360-Degree Adjustable Mounting Angle — Position the extinguisher for optimal accessibility

      Vehicle Compatibility

      • Jeep Wrangler JK — 2007–2018 (2-door and 4-door Unlimited)
      • Fits factory and most aftermarket roll bars
      • Compatible with hard top and soft top configurations

      Why Carry a Fire Extinguisher Off-Road?

      Vehicle fires can happen anywhere, but they're especially dangerous on remote trails where emergency services are far away. Common off-road fire hazards include fuel leaks, electrical shorts from aftermarket accessories, overheated brakes igniting dry brush, and catalytic converter contact with tall grass. A properly mounted fire extinguisher gives you critical seconds to respond before a small flame becomes a total loss.

      Installation Guide

      1. Choose your mounting location on the roll bar — driver or passenger side, front or rear
      2. Loosen the clamp bolts to open the mounting brackets
      3. Position brackets around the roll bar at your desired angle
      4. Tighten bolts evenly until the holder is secure — do not overtighten
      5. Insert your 3lb fire extinguisher into the cradle and secure the quick-release strap
      6. Test that the extinguisher can be removed quickly and easily

      Frequently Asked Questions

      Q: Does this come with a fire extinguisher?
      A: No, this listing is for the mounting bracket only. You'll need a standard 3lb automotive fire extinguisher (sold separately).

      Q: Will this fit a 4-door JK Unlimited?
      A: Yes! The roll bar diameter is the same on both 2-door and 4-door (Unlimited) Wrangler JK models from 2007–2018.

      Q: Can I install this on the driver or passenger side?
      A: Yes. The mount is fully reversible and 360-degree adjustable — install it wherever provides the quickest access for you.

      Q: Will this scratch my roll bar?
      A: No. The clamps feature rubber-lined contact surfaces that protect your roll bar's paint or powder coat finish.

      Q: Is this legal for on-road use?
      A: Yes. Carrying a fire extinguisher is legal and recommended in all 50 states. It's also required equipment for many organized off-road events.

      Related Products

      Complete your build with these complementary iFJF products:

      Frequently Asked Questions

      Q: Will this fit my 2007-2018 Wrangler?
      A: Designed for 2007-2018 Jeep Wrangler Wrangler. Verify your exact year and model (2-door vs 4-door) before ordering.

      Q: Is installation difficult?
      A: Most Jeep accessories are designed for DIY installation with basic hand tools. Average install time is 15-45 minutes.

      Q: What material is this made from?
      A: Manufactured from high-grade materials including billet aluminum, stainless steel, and UV-resistant polymers selected for off-road durability.

      Q: Is this compatible with aftermarket modifications?
      A: Most accessories work with stock and mildly modified Wranglers. For extensive modifications, verify fitment with product dimensions.

      Q: How does this compare to OEM?
      A: iFJF aftermarket accessories match or exceed OEM quality at a more accessible price point with rigorous quality control for harsh off-road conditions.

      Q: What is the warranty?
      A: All iFJF products come with a 1-year warranty against manufacturing defects.

      🔧 Related Products

      📖 Helpful Resources

      Recently viewed products

      © 2026 iFJF Direct | Sitemap

        • American Express
        • Diners Club
        • Discover
        • Maestro
        • Mastercard
        • PayPal
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account