Description
Product Overview
Keep your Jeep Wrangler JK's doors secure with these OE-spec replacement door hinge nuts from iFJF. Designed as a direct drop-in replacement for worn, stripped, or missing factory door hinge nuts on 2007–2017 Wrangler JK and JKU models. Manufactured from corrosion-resistant stainless steel with precise DR-8 thread specification to match factory hinge bolts exactly. This 4-piece set provides enough hinge nuts to replace all critical mounting points — restoring proper door operation and eliminating door sag and rattle.
Key Features
-
OE-Spec DR-8 Thread — Precisely matches factory door hinge bolts for a direct, trouble-free replacement. No cross-threading, no loose fit.
-
4-Piece Set — Complete set covers all critical door hinge mounting points. Enough to replace one side or address multiple worn nuts.
-
Stainless Steel Construction — Corrosion-resistant material stands up to rain, mud, road salt, and off-road conditions without rusting or seizing.
-
Exact Fit — Designed specifically for Jeep Wrangler JK and JKU (2007–2017). Not a universal part — guaranteed to fit.
-
Restores Door Alignment — Properly secured hinge nuts eliminate door sag, wind noise, and rattling caused by loose or missing hardware.
-
Quick DIY Install — No special tools required. Threads on by hand and tightens with a standard socket wrench in minutes.
Compatibility
| Year |
Make |
Model |
Notes |
| 2007–2017 |
Jeep |
Wrangler JK (2-Door) |
All trims — Sport, Sahara, Rubicon |
| 2007–2017 |
Jeep |
Wrangler JKU (4-Door Unlimited) |
All trims — Sport, Sahara, Rubicon |
Specifications
| Specification |
Value |
| Material |
Stainless Steel |
| Thread Specification |
DR-8 (OE Match) |
| Quantity |
4 Pieces |
| Finish |
Natural Stainless |
| Installation |
Hand-Thread + Socket Wrench |
Installation Guide
- Remove the old/stripped hinge nut with a socket wrench if still attached.
- Clean the hinge bolt threads with a wire brush if needed.
- Thread the new stainless steel nut onto the hinge bolt by hand.
- Tighten firmly with a socket wrench. Do not over-torque.
- Open and close the door to verify smooth operation and proper alignment.
Pro Tip: Apply a small amount of anti-seize compound to the bolt threads for easier future removal if you frequently take your doors off.
Why Choose iFJF?
-
Proven Performance — Every iFJF product is engineered for measurable gains in power, efficiency, or durability over factory components.
-
Premium Materials — We use only certified materials — T-304/SS304 stainless steel, 6061-T6 aluminum, IATF 16949-certified filtration media — never cheap substitutes.
-
Perfect Fit Guarantee — Every product is jig-tested or fitment-verified on actual vehicles before release. No guesswork, no modifications required.
-
Fast Support — Fitment questions answered within 24 hours. Full installation guidance available.
-
Fast Free Shipping — Free standard shipping on orders $50+ within the continental US.
FAQ
Q: Will these fit my 2015 Wrangler JK Unlimited?
A: Yes. These nuts are designed for all 2007–2017 Jeep Wrangler JK (2-door) and JKU (4-door Unlimited) models. Exact DR-8 thread match.
Q: Are these the same as the factory nuts?
A: Yes. Manufactured to the same DR-8 thread specification as the OEM door hinge nuts. Stainless steel offers better corrosion resistance than factory carbon steel.
Q: How many do I need for a full set?
A: Each door uses 2 hinge nuts (upper and lower hinge). This 4-piece set covers one complete side, or you can buy 2 sets for all 4 doors.
Q: Can I install these myself?
A: Absolutely. Basic hand tools only — thread on by hand, finish tightening with a socket wrench. Takes less than 5 minutes per nut.
Q: Will these rust over time?
A: No. Made from stainless steel, these nuts resist rust and corrosion far better than the factory carbon steel hardware — even with frequent door removal and off-road exposure.
Related Products
