Description
Product Overview
When the touchpad on your Speed Queen or Huebsch dryer stops responding — requiring excessive force, phantom-pressing random cycles, or going completely dead — this exact-replacement membrane switch restores full functionality. Compatible with both commercial (laundromat) and residential Speed Queen/Huebsch dryers, this touchpad replaces part numbers 511867, 510034, and 510036. It's a true plug-and-play installation requiring no programming, calibration, or modification — simply connect the ribbon cable, peel the adhesive backing, and press into place.
Key Features
-
Exact OEM-Style Replacement — Same button layout, same tactile response, same ribbon cable connector. Designed to look and function identically to the original Speed Queen/Huebsch touchpad.
-
Plug-and-Play Installation — No programming, no calibration, no software updates required. Unplug the old touchpad ribbon cable, plug in the new one, and you're done. The dryer's control board recognizes it immediately.
-
Durable Sealed Membrane Construction — Fully sealed against moisture, lint, dust, and laundry chemicals. The membrane design prevents the common failure mode where debris gets under individual mechanical buttons.
-
Multi-Part Number Coverage — One touchpad replaces multiple Speed Queen and Huebsch part numbers (511867, 510034, 510036), simplifying inventory for laundromat owners and multi-unit property managers.
-
Clear, Fade-Resistant Graphics — Button labels are printed with UV-resistant ink that won't fade or wear off, maintaining legibility through years of heavy use.
Compatibility / Fitment
| Brand |
Type |
Part Numbers Replaced |
| Speed Queen |
Commercial & Residential Dryers |
511867, 510034, 510036 |
| Huebsch |
Commercial & Residential Dryers |
511867, 510034 |
Technical Specifications
| Specification |
Value |
| Part Numbers |
511867, 510034, 510036 |
| Switch Type |
Membrane (Sealed) |
| Installation |
Plug-and-Play (No Programming) |
| Connection |
Ribbon Cable with OEM Connector |
| Application |
Speed Queen / Huebsch Electric & Gas Dryers |
Why Choose This
Speed Queen dryers are known for lasting 20+ years — but the touchpad is a common wear point, especially in commercial laundromat settings with hundreds of cycles per day. A service call to replace this $28 part typically costs $150-250. As a DIY repair, it takes about 20 minutes and requires only a Phillips screwdriver. For laundromat owners, keeping a spare touchpad on hand means zero downtime when a unit goes down — swap it in minutes and get the dryer back earning revenue. For homeowners, it restores your Speed Queen's legendary reliability at minimal cost.
Related Products
Frequently Asked Questions
Q: How do I know if my touchpad is bad?
A: Common signs of failure: buttons require excessive force to register, phantom presses (dryer starts/changes cycles on its own), certain buttons stop working while others function, display flickers or goes blank, or the touchpad is completely unresponsive. If the dryer powers on but won't respond to button input, the touchpad is the most likely cause.
Q: Does this need any programming or setup?
A: No — pure plug-and-play. The dryer's control board automatically recognizes the new touchpad. Simply connect the ribbon cable and reassemble. No software, no calibration, no technician required.
Q: What's the difference between part numbers 511867, 510034, and 510036?
A: Functionally, they're identical. 511867 is the original part number. 510034 and 510036 are revised/updated part numbers for the same assembly, with minor manufacturing improvements but the same fit and function. This touchpad replaces all three.
Q: Will this fit my specific Speed Queen model?
A: Compatible with most Speed Queen and Huebsch electric and gas dryers that use a membrane touchpad control panel. Check your dryer's service manual or look for the existing part number on the back of the current touchpad before ordering.
Q: How long does installation take?
A: 20-30 minutes for a DIY installation. Steps: unplug the dryer, remove the top panel or control panel cover (typically 2-4 screws), disconnect the ribbon cable from the old touchpad, remove the old touchpad (it may be adhered — use a plastic scraper if needed), clean the mounting surface thoroughly, connect the new touchpad cable, peel the adhesive backing, press the new touchpad into place, reassemble, and test.
Q: Is this for commercial laundromat dryers too?
A: Yes — this touchpad works in both commercial (laundromat/coin-op) and residential Speed Queen and Huebsch dryers that use this control panel design. The membrane construction is rated for high-cycle-count commercial use.
Order with Confidence
Fast shipping from our US warehouse. Dedicated customer support team ready to answer your questions. Click Add to Cart to get your order started today.
Related Guides & Articles
Check out these helpful resources from the iFJF blog:
