Search results for "Multiport Valves"

270068 1-1/2" Multiport Pool Valve Top Assembly — HiFlow Replacement Replace your worn or leaking multiport valve top with the iFJF 270068 Top Assembly. Designed as a direct fit for 1-1/2" HiFlow top and side mount pool and spa multiport valves, this assembly saves you the cost of a complete valve replacement. Includes handle, diverter, gasket, spring, and all necessary components. Key Features Complete Assembly: Includes handle, diverter, spider gasket, spring, and mounting hardware 1-1/2" HiFlow Compatible: Designed for standard HiFlow top and side mount multiport valves Leak-Free Operation: New spider gasket ensures proper sealing between ports Cost-Effective Repair: Replace just the top assembly instead of the entire valve body Easy DIY Installation: Remove old top, install new — typical repair takes under 30 minutes Compatibility Valve Type Size Mount Style HiFlow Multiport Valve 1-1/2" Top Mount HiFlow Multiport Valve 1-1/2" Side Mount Compatible 6-Way Valves 1-1/2" Top / Side Mount Technical Specifications Specification Detail Part Number 270068 Valve Size 1-1/2" NPT Positions 6-Way (Filter, Backwash, Rinse, Waste, Recirculate, Closed) Includes Handle, Diverter, Spider Gasket, Spring, Screws Signs Your Valve Top Needs Replacement Water Leaking from Handle: Worn O-rings or cracked top housing Water Bypassing to Waste: Damaged spider gasket allows water to leak between ports Hard-to-Turn Handle: Corroded spring or debris in the diverter mechanism Cracked Housing: UV damage or freeze damage to the plastic top Frequently Asked Questions Q: Will this fit my Hayward multiport valve?A: This assembly fits standard 1-1/2" HiFlow-style multiport valves. Please verify your valve model and mounting style before ordering. Compare bolt pattern to product images. Q: Does this include the spider gasket?A: Yes, the assembly includes a new spider gasket — the most common failure point in multiport valves. Q: Do I need to replace the whole valve or just the top?A: If your valve body is not cracked or damaged, replacing just the top assembly is usually sufficient and much more cost-effective. Q: How do I install this?A: Remove the screws holding the old top, lift off, clean the mating surface, position new gasket, install new top, and tighten screws evenly in a star pattern. Q: What if the bolt holes don't line up?A: Compare the bolt pattern in the product photos to your existing valve. There are multiple valve designs — this assembly fits the standard 6-bolt HiFlow pattern. Related Products Explore more products from our Pool & Spa Parts collection: All Pool & Spa Parts — Browse our complete selection Fuel Filters & Water Separators — Protect your fuel system Oil Filters — Premium filtration for diesel engines

Read more less

272535 Compression Spring — HiFlow 1-1/2" Multiport Valve Replacement Fix your pool filter multiport valve without buying a complete assembly. The iFJF 272535 Compression Spring replaces the rusted, broken, or weak cap spring in 6-way 1-1/2" HiFlow pool and spa multiport valves. A fresh spring restores smooth handle operation and proper diverter seating. Key Features Exact OEM Replacement: Matches 272535 spring specifications — 1-3/8" outside diameter Stainless Steel Construction: Corrosion-resistant material for long life in pool chemical environments Restores Handle Feel: Replaces weak or rusted springs that cause sloppy handle operation Proper Diverter Tension: Ensures the diverter gasket seats correctly for leak-free port switching Cost-Effective Fix: Replace just the spring instead of the entire valve top assembly Compatibility Valve Type Size 6-Way HiFlow Multiport Valve 1-1/2" Top Mount Multiport Valves 1-1/2" (with compatible spring cap) Side Mount Multiport Valves 1-1/2" (with compatible spring cap) Technical Specifications Specification Detail Part Number 272535 Outside Diameter 1-3/8" (35mm) Material Stainless Steel Application Multiport Valve Handle Cap Spring Frequently Asked Questions Q: How do I know if my spring is bad?A: Signs include: handle feels loose or wobbly, water leaks between valve positions, handle doesn't click into position properly, or visible rust/corrosion on the old spring. Q: Will this fit any multiport valve?A: This spring is designed for 1-1/2" HiFlow-style multiport valves with a 1-3/8" OD spring cap. Measure your old spring before ordering. Q: Do I need special tools to replace it?A: Basic hand tools — typically just a Phillips screwdriver to remove the handle and cap screws. The spring sits under the handle cap. Q: Does this come with the handle or cap?A: No, this is the compression spring only. If you need the complete top assembly, see our 270068 valve top assembly listing. Q: How long does this spring typically last?A: With stainless steel construction, 3-5 years in normal pool chemical environments. Replace whenever you service the spider gasket. Related Products Explore more products from our Pool & Spa Parts collection: All Pool & Spa Parts — Browse our complete selection Fuel Filters & Water Separators — Protect your fuel system Oil Filters — Premium filtration for diesel engines

Read more less

Product Overview The SPX0710 Rebuild Repair Kit is a premium aftermarket replacement designed for Hayward Multiport Valves Pro and VL Series Sand Filter Systems. Engineered with precision-manufactured components and high-grade alloy/composite construction, this part delivers reliable, long-lasting performance that meets or exceeds OEM standards — all at a fraction of the dealership price. Key Features Precision Engineered: Manufactured to exact OEM specifications for seamless fitment and reliable performance on Hayward Multiport Valves Pro and VL Series Sand Filter Systems. High-Grade Alloy/Composite Construction: Built from high-grade alloy/composite for superior durability, corrosion resistance, and long service life. Direct Replacement: No modifications required — installs with basic hand tools in most applications, saving you expensive shop labor costs. Rigorously Tested: Each unit undergoes quality control inspection to ensure consistent performance and reliability before shipment. Cost-Effective Alternative: Delivers OEM-equivalent quality at a fraction of dealership pricing, backed by iFJF customer support. Compatibility Hayward Multiport Valves Pro and VL Series Sand Filter Systems Compatible with Hayward / SPX applications Technical Specifications Dimensions 0710 Material High-Grade Alloy/Composite Replaces Part # SPX0710 Condition New Warranty 30-Day Satisfaction Guarantee Why Choose iFJF? At iFJF Direct, we specialize in premium aftermarket parts that deliver OEM quality without the dealership markup. Every product is sourced from trusted manufacturers and backed by our commitment to customer satisfaction. Whether you're a professional mechanic or a weekend DIY enthusiast, we make it easy to get the right part at the right price — with fast, reliable shipping across the United States. Frequently Asked Questions Q: Will this fit my vehicle/equipment?A: Please check the compatibility listing above. This part is designed for Hayward Multiport Valves Pro and VL Series Sand Filter Systems. If you're unsure, contact us with your vehicle/equipment details and we'll confirm fitment. Q: Is this an OEM or aftermarket part?A: This is a premium aftermarket replacement part manufactured to match or exceed OEM specifications for fit, form, and function — at a significantly lower price point. Q: What's included in the package?A: You'll receive the spx0710 rebuild repair kit as shown in the product images. Installation hardware is included where applicable. Please review all product images carefully. Q: How difficult is installation?A: Installation is straightforward for anyone with basic mechanical skills. Most customers complete the job in 30-60 minutes using common hand tools. Professional installation is always recommended if you're unsure. Q: What is your return policy?A: We offer a 30-day satisfaction guarantee. If the part doesn't fit or meet your expectations, return it in original condition for a full refund. See our Returns page for full details. Q: How fast is shipping?A: Orders typically ship within 1-2 business days from our US warehouse. Delivery takes 3-7 business days depending on your location. Expedited shipping options are available at checkout. Related Products Looking for compatible parts or accessories? Browse our full collection of pool & spa parts for more options.

Read more less

271148 2-Inch Diverter 5-Spoke Gasket for HiFlow Multiport Valve iFJF replacement diverter gasket precision-engineered for HiFlow pool and spa multiport valves. Molded to OEM specifications for a leak-free seal and reliable valve operation season after season. Features 5-spoke design ensures even water distribution and prevents channeling 2-inch diameter — standard fit for HiFlow top and side mount multiport valves OEM-spec quality — manufactured to meet or exceed original equipment standards Durable elastomer construction resists chemical degradation and compression set Direct drop-in replacement — no modifications required Compatibility Replaces part number: 271148 Fits HiFlow pool and spa multiport valves (top mount and side mount configurations) Specifications Part Number: 271148 Type: 5-Spoke Diverter Gasket Size: 2 Inch Material: High-grade elastomer Factory Direct Supply — iFJF manufactures its own pool replacement parts. Bulk orders are welcome. Contact us for wholesale pricing and volume discounts. Email: support@ifjf.net Technical Specifications Material High-Temperature Resistant EPDM Rubber (ASTM D2000 Grade) Compatibility 2-Inch Multiport Valves Replaces Models 271148, G-417, G417, SM20-2, SM20 261055, SM20 261152, TM22 261185 Design 5-Spoke Reinforced Structure Certifications ASTM D2000 — Chlorine & Ozone Resistant Installation <5 Minutes, Tool-Free Key Benefits 🔧 Precision Fitment — Leak-Free Guaranteed Direct replacement for models 271148, G-417, G417, SM20-2, SM20 261055, SM20 261152, TM22 261185. Engineered specifically for 2-inch multiport valves to ensure leak-free performance in demanding pool and spa valve systems. 🧪 Advanced EPDM — 3× Longer Lifespan High-temperature EPDM rubber resists chlorine, ozone, and chemical corrosion — delivering 3× the service life of standard rubber gaskets. ASTM D2000 certified for pool-grade durability. 💧 Optimized 5-Spoke Water Flow Enables seamless backwash, circulation, and drainage mode switching. Prevents pressure leaks that rob your pool of filtration efficiency — keeps your system running at peak performance. ⚡ 5-Minute Tool-Free Installation True plug-and-play replacement — no tools, no sealants, no hassle. Swap worn multiport valve seals in minutes and get back to enjoying your pool. 🏊 Real-World Applications Pool Owners: Prevent stuck valve emergencies during weekend parties. Seamlessly switch from filtration to backwash mode after storms without flooding equipment pads. Hot Tub Maintenance: Survives daily 104°F jet cycles and chemical shocks. Stops leaks that cause heater corrosion — protects your $1,200+ spa investment. 🛡️ Superior Sealing Performance Effectively prevents water and air leaks, maintains optimal system operating pressure, and protects your expensive filtration system and pump from damage caused by poor valve sealing. Product Overview 271148 2" Diverter 5-Spoke Gasket for HiFlow Pool & Spa Multiport Valve | is a premium-quality replacement component engineered for exact fitment and reliable performance. Manufactured to meet or exceed OEM specifications using high-grade materials, this part delivers dependable service life for your equipment. Key Features Precision Fit: Engineered to exact OEM dimensions for leak-free, drop-in installation. Chemical Resistant: Made from high-grade materials that resist chlorine, bromine, and ozone degradation. Direct Replacement: No modifications required — simply remove the old part and install this one. Durable Construction: Premium materials prevent cracking, warping, and compression set over time. Cost-Effective: Get OEM-equivalent quality at a fraction of dealer pricing. Why Choose iFJF Direct iFJF Direct specializes in premium replacement parts for diesel trucks, RVs, marine, pool & spa, and automotive applications. Every product is backed by our commitment to quality, fast US-based shipping, and responsive customer support. We source directly from IATF 16949-certified manufacturers to bring you OEM-equivalent quality at competitive prices. Frequently Asked Questions Q: Will this fit my pool/spa model?A: Please verify your multiport valve model number against the specifications listed. This part is designed for HiFlow-compatible valves. Contact us with your valve model if you need help confirming fitment. Q: What material is this made from?A: This component is manufactured from high-grade, chemical-resistant materials engineered to withstand constant exposure to chlorine, bromine, and ozone in pool and spa environments. Q: How do I install this part?A: Installation is straightforward — remove the old component and replace with this direct-fit part. We recommend using silicone-based lubricant on gaskets and O-rings during installation for optimal sealing. Q: How long will this last?A: With proper maintenance and balanced water chemistry, these components typically provide 3-5 years of reliable service. Inspect annually for signs of wear. Q: Is this an OEM part?A: This is a premium aftermarket replacement manufactured to match OEM specifications. It provides equivalent performance at a more affordable price point.

Read more less

Stop Your Multiport Valve from Leaking Water If water is leaking from your pool filter's waste line while in filter mode — or you're losing water through the backwash port — your multiport valve's spider gasket has failed. The iFJF SPX0715D Spider Gasket is a direct, precision-fit replacement for Hayward SP0715 and SP0716 series 2-inch multiport valves. Restore proper valve sealing in under 30 minutes. Signs Your Spider Gasket Needs Replacement Water continuously dripping from the waste/backwash line in filter mode Water bypass between positions — pool losing water unexpectedly Difficulty turning the valve handle — gasket binding Sand or DE returning to the pool through returns Gasket is flattened, cracked, or has missing spokes Compatibility — Exact Fit Brand Valve Model Size Hayward SP0715, SP0716 2-inch Hayward SP0714T variant (verify before purchase) 2-inch Replaces OEM part numbers: SPX0715D, SPX0715CA, SPX0715BA, SPX0716D Specifications Specification Detail Material Premium EPDM rubber — chlorine and chemical resistant Diameter Precision molded for SP0715/SP0716 2" valve Spoke Pattern 8-spoke design — matches OEM precisely Thickness OEM-equivalent — ensures proper compression seal Expected Lifespan 3-5 years under normal pool chemical conditions Installation — 4 Simple Steps Turn off the pump and relieve pressure. Remove the valve handle screws and lift off the handle assembly. Remove the old gasket — it sits in the groove on the underside of the valve diverter (key-seal assembly). Clean the groove thoroughly of all old adhesive and debris. Press the new gasket into the groove, aligning each spoke with its channel. No adhesive needed — the gasket seats in place. Reassemble the valve — align the handle, tighten screws evenly, and test all positions for smooth operation. Why Choose iFJF? Precision-molded — Every spoke and seal surface matches the OEM dimensions exactly Premium EPDM material — Resists chlorine, bromine, salt, and UV degradation Complete seal restoration — Eliminates water bypass between all valve positions No adhesive required — Friction-fit design stays in place during assembly Fraction of the cost — Same quality as OEM at a much better price Frequently Asked Questions Q: How do I know if this fits my Hayward valve?A: Check your valve label — it should say SP0715 or SP0716. This is a 2-inch valve gasket. Also measure your valve's plumbing connections — they should be 2-inch. Q: Do I need to use glue or adhesive to install this gasket?A: No. The gasket is designed to press-fit into the groove on the diverter assembly. Using adhesive can actually cause premature failure by binding the gasket. Q: Why does my new gasket fail so quickly?A: Common causes include: turning the valve handle while the pump is running (always turn off first), excessive chlorine levels, or the valve body being warped. Always stop the pump before changing valve positions. Q: Will this stop my filter from leaking out the waste line?A: Yes — a properly installed spider gasket seals the internal ports so water flows only through the selected position. Leaking from the waste line in filter mode is the classic symptom of a bad spider gasket. Q: How often should I replace the spider gasket?A: Under normal conditions, every 3-5 years. If you notice leaking or the handle becoming hard to turn, inspect the gasket. Regular lubrication of the gasket with silicone pool lube extends its life.

Read more less

Product Overview The 271168 2-Inch Valve Diffuser for HiFlow Pool & Spa Multiport Valve | iFJF is a precision-engineered replacement part designed to restore proper function and stop leaks in your pool or spa equipment. Manufactured to meet or exceed OEM specifications, this component delivers reliable, long-lasting performance at a fraction of the dealer price. Pool equipment operates in a harsh environment — constant exposure to chlorinated water, UV radiation, temperature swings, and pressure cycles. When seals, O-rings, and internal components degrade, the result is leaks, poor filtration, and higher operating costs. Key Features OEM-Spec Precision: Manufactured to exact dimensional tolerances for guaranteed fit without modifications. Chemical-Resistant Materials: EPDM, Viton, or chemical-grade polymers resist degradation from chlorine, bromine, salt, and UV. Extended Service Life: Premium materials deliver 2-3x the service life of economy alternatives. Easy DIY Installation: Straightforward replacement with basic hand tools — most jobs take 15-30 minutes. Value Pack Savings: Multi-pack options available — stock up and save vs buying singles when applicable. Compatibility Specification Detail Brand HiFlow & Compatible Multiport Valves Replaces Part # 271168 Material EPDM Rubber / Engineered Polymer Application Residential & Light Commercial Pool/Spa When to Replace Visible Leaks: Water seeping from connections or housings = failed seal or gasket Decreased Performance: Reduced flow, poor filtration = worn internal components Unusual Noise: Grinding or squealing = worn bearings, gears, or impellers Age: Rubber seals should be replaced every 2-3 years as preventive maintenance Hard/Cracked Rubber: O-rings that feel hard or show surface cracks no longer seal properly Installation Tips Turn Off Equipment: Switch off at circuit breaker before working on pool equipment. Release Pressure: Open air relief valve on filter to release system pressure. Clean All Surfaces: Remove old gasket material and debris — clean surface = proper seal. Use Proper Lubricant: Silicone-based pool lube only. NEVER use petroleum jelly — it destroys EPDM. Tighten Evenly: Cross-pattern tightening for multi-bolt connections. Test Before Full Operation: Run briefly and check all connections. Frequently Asked Questions Q: Will this fit my pool/spa valve?A: Compatible with HiFlow top-mount and side-mount multiport valves (2-inch models) and most aftermarket 2-inch multiport valves including Pentair and Hayward compatible models. Part 271168. If your valve uses 1-1/2 inch diffuser, this will NOT fit. Q: What does the valve diffuser do?A: Sits inside the multiport valve and evenly distributes water flow across filter media during filtration mode. A cracked or clogged diffuser causes channeling, poor filtration, and sand returning to pool. Replacement restores proper filter performance. Q: How do I replace the diffuser?A: 1) Turn off pump and relieve pressure 2) Remove 6-8 screws on valve lid 3) Lift off valve top assembly 4) Diffuser is white plastic at bottom of center pipe 5) Unscrew old, thread new hand-tight + 1/4 turn 6) Reassemble valve lid. Q: Why is sand coming back into my pool?A: Sand in pool usually means: 1) Cracked/broken diffuser (most common) 2) Damaged standpipe or lateral 3) Wrong sand grade (#20 silica pool filter sand only) 4) Overfilled sand. Start by inspecting diffuser — easiest access point. Related Products Shop All Pool & Spa Parts → Pool Filter Cartridges & Grids → Related Guides & Articles Pool Filter Maintenance: Complete Seasonal Guide → How to Fix Common Pool Pump Problems →

Read more less

3-Port Positive Seal Diverter Valve — Pool & Spa Flow Control The iFJF 3-Port Positive Seal Diverter Valve provides reliable flow control for pool and spa plumbing. With 1.5 to 2-inch slip-fit connections and a smooth-action diverter gate, it redirects water between two outlets — essential for spa/pool combinations, water features, solar heating loops, and multi-return plumbing. Replaces OEM 4715, 4717, and 263037. Key Features Positive Seal: Diverter gate seats firmly for drip-free shutoff — no bypass even at high pressure 3-Port Config: One inlet, two selectable outlets for spa/pool mode, water features, or solar bypass 1.5-2 inch: Slip-fit sockets accept both sizes with appropriate reducer bushing Smooth Operation: Large T-handle with 90-degree rotation — no tools needed Chemical Resistant: CPVC body with EPDM seals for chlorine, bromine, salt, and temperature swings Compatibility Application OEM Part Connection Pool/Spa Diverter 4715, 4717, 263037 1.5 / 2-inch slip-fit Water Feature Control 4715, 4717, 263037 1.5 / 2-inch slip-fit Solar Heating Bypass 4715, 4717, 263037 1.5 / 2-inch slip-fit Multi-Return Pools 4715, 4717, 263037 1.5 / 2-inch slip-fit Product Specifications Specification Detail Brand iFJF SKU FJ-WZ-DV3P Price $47.99 Category Pool Parts Condition New Warranty 30-Day Satisfaction Guarantee Why Choose iFJF? At iFJF Direct, we supply premium replacement parts backed by responsive US-based support. Every product meets or exceeds OEM specifications at a better value. Fast US shipping. Need help? Contact our team. Frequently Asked Questions Q: What does positive seal mean?A: A positive seal diverter uses a compression-fit gate that seals against the valve body with a rubber gasket — no water leaks to the inactive port when fully diverted. Q: Will this work as a Jandy valve replacement?A: It matches the 4715/4717/263037 spec used across brands. If your valve has 1.5 or 2-inch slip-fit and 3 ports, it should fit. Q: Can I use this with a saltwater pool?A: Yes. CPVC body and EPDM seals are fully compatible with salt chlorine generator systems. Q: Do I need PVC cement?A: Yes, these are slip-fit connections. Use standard PVC primer and cement. Allow 2-hour cure at 60F+ before pressurizing. Related Products iFJF 4724/4716 2-Port Diverter Valve iFJF 39010200 Tank Clamp O-Ring

Read more less

2-Port Positive Seal Diverter Valve — Reliable Pool Flow Shutoff The iFJF 2-Port Positive Seal Diverter Valve provides dependable on/off flow control for individual pool and spa plumbing lines. With 1.5 to 2-inch slip-fit connections and a positive-seal gate, it delivers complete flow shutoff for equipment isolation, maintenance access, or line balancing. Replaces OEM 4724, 4716, and 263038. Key Features Positive Seal Shutoff: Gate seats fully for zero-bypass flow stoppage under full pump pressure 2-Port Inline: Simple in/out for isolating equipment, balancing lines, or seasonal shutoff 1.5-2 inch: Slip-fit sockets accept both PVC pipe sizes for installation flexibility Chemical Resistant: CPVC body with EPDM seals for pool chemicals, UV, and weather Tool-Free: Large ergonomic handle turns 90 degrees from full-open to full-closed Compatibility Application OEM Part Connection Pump Isolation 4724, 4716, 263038 1.5 / 2-inch slip-fit Skimmer Line Control 4724, 4716, 263038 1.5 / 2-inch slip-fit Return Line Balance 4724, 4716, 263038 1.5 / 2-inch slip-fit Equipment Maintenance 4724, 4716, 263038 1.5 / 2-inch slip-fit Product Specifications Specification Detail Brand iFJF SKU FJ-WZ-DV2P Price $47.99 Category Pool Parts Condition New Warranty 30-Day Satisfaction Guarantee Why Choose iFJF? At iFJF Direct, we supply premium replacement parts backed by responsive US-based support. Every product meets or exceeds OEM specifications at a better value. Fast US shipping. Need help? Contact our team. Frequently Asked Questions Q: What is the difference between 2-port and 3-port?A: The 2-port is an in-line on/off shutoff — one water path. The 3-port has one inlet with two selectable outlets for switching between destinations. Q: Can I use this to isolate my pump for cleaning?A: Yes, install on the suction side before the pump to shut off water for strainer basket cleaning without draining. Q: Does the positive seal hold against full pump pressure?A: Yes, tested to hold against standard residential pool pump pressures up to 50 PSI operating. Q: Is this valve serviceable?A: The handle can be greased through the top cap. The internal gate seal is not field-replaceable. With annual handle lubrication, these typically last 5-8 years. Related Products iFJF 4715/4717 3-Port Diverter Valve iFJF 39010200 Tank Clamp O-Ring

Read more less

Product Overview The 25010 Plunger Valve & 11872 Dual Split Hose Connector is a complete connection kit for above-ground pool and sand filter pump setups. This bundle combines the 25010 plunger valve with the 11872 dual split hose connector, letting you connect two hoses to your pump while maintaining independent flow control. A direct-fit replacement for OEM part numbers 25010 and 11872, this kit delivers a watertight seal and hassle-free maintenance. Key Features Complete Kit: Includes both the 25010 plunger valve and the 11872 dual split hose connector in one package. Dual Hose Support: Connect two hoses to your filter pump for improved water circulation and faster filtration. Independent Flow Control: The plunger valve lets you shut off water flow for filter cleaning without draining the pool. Leak-Free Seal: Precision-molded threads with integrated gaskets provide watertight connections. Chemical Resistant: Durable PVC / ABS construction resists chlorine, bromine, and UV degradation. Specifications Specification Detail Brand iFJF Product Type Plunger Valve + Hose Connector Kit Replaces Part # 25010, 11872 Material PVC / ABS Condition New Warranty 12 Months Why Choose iFJF DirectiFJF Direct specializes in premium replacement parts for pool & spa, RV, marine, and diesel applications. Every product is backed by our commitment to quality, fast US-based shipping, and responsive customer support — bringing you OEM-equivalent quality at competitive prices. Frequently Asked Questions Q: What’s included in this kit?A: This kit includes the 25010 plunger valve and the 11872 dual split hose connector — everything you need to connect two hoses to your above-ground pool filter pump. Q: Will this fit my above-ground pool?A: This kit is designed for standard above-ground pool and sand filter pump setups using 25010 / 11872 connectors. Verify your hose diameter before ordering. Q: How do I install this kit?A: Shut off the pump, hand-tighten the connectors onto your hoses and pump fittings, and ensure all gaskets are seated correctly. Use Teflon tape on threaded connections for the best seal. Q: Can I service my filter without draining the pool?A: Yes — close the plunger valve to shut off water flow before servicing the pump or filter. Q: Is this an OEM part?A: This is a premium aftermarket replacement manufactured to match OEM specifications at a more affordable price.

Read more less

Product Overview The 25010 Plunger Valve Hose Connector Assembly is a direct-fit replacement for above-ground pool and sand filter pump setups. Compatible with OEM part numbers 25010, 25080RP, and 10747, this assembly lets you shut off water flow to the pump for filter cleaning and maintenance without draining your pool. Precision-molded construction ensures a watertight seal for leak-free operation all season long. Key Features Leak-Free Seal: Precision-molded threads and an integrated gasket provide a watertight connection to your filter pump hoses. Plunger Valve Control: Quickly shut off water flow to service the pump or filter without draining the pool. Chemical Resistant: Durable PVC and ABS construction resists chlorine, bromine, and UV degradation. Direct Replacement: Drop-in fit for OEM 25010 / 25080RP / 10747 plunger valve assemblies — no modifications required. Easy Installation: Hand-tighten onto your existing hoses and pump fittings; no special tools needed. Specifications Specification Detail Brand iFJF Product Type Plunger Valve Hose Connector Replaces Part # 25010, 25080RP, 10747 Material PVC / ABS Condition New Warranty 12 Months Why Choose iFJF DirectiFJF Direct specializes in premium replacement parts for pool & spa, RV, marine, and diesel applications. Every product is backed by our commitment to quality, fast US-based shipping, and responsive customer support — bringing you OEM-equivalent quality at competitive prices. Frequently Asked Questions Q: Will this fit my above-ground pool pump?A: This assembly is designed for standard above-ground pool and sand filter pump setups using 25010 / 25080RP / 10747 plunger valves. Verify your hose diameter and valve model before ordering. Q: How do I install this connector?A: Shut off the pump, hand-tighten the assembly onto your hoses and pump fittings, and ensure the gasket is seated correctly. Use Teflon tape on threaded connections for the best seal. Q: Can I use this to clean my filter without draining the pool?A: Yes — close the plunger valve to shut off water flow, then service the pump or filter. This prevents water loss and keeps your pool full. Q: How long will this last?A: With proper care and balanced water chemistry, this connector assembly typically provides 3–5 years of reliable service. Inspect the gasket annually for wear. Q: Is this an OEM part?A: This is a premium aftermarket replacement manufactured to match OEM specifications at a more affordable price.

Read more less