Search results for "Multiport Valves"
iFJF Dellorto DRLA Carburetor Rebuild Kit — 36/40/45/48mm Gaskets & Diaphragms
Dellorto DRLA Carburetor Rebuild & Tune-Up Kit — 36/40/45/48mm Restore your Dellorto DRLA carburetor to factory performance with the iFJF Complete Rebuild Kit. This comprehensive kit contains all gaskets, O-rings, needle valve assemblies, and diaphragms needed to service Dellorto DRLA 36mm, 40mm, 45mm, and 48mm carburetors. Whether you're tuning for performance or fixing fuel leaks, this kit has everything you need. Key Features Complete Kit: Includes all gaskets, O-rings, needle valve, and diaphragm as shown Multiple Needle Valve Sizes: Includes 150, 170, 200, 225, and 250 needle valve options for tuning flexibility Hardware Included: 5 top cover screws and 4 pump diaphragm housing screws Direct Fit: Precision-manufactured to Dellorto DRLA OEM specifications Restore Performance: Eliminates vacuum leaks, fuel leaks, and rough idle caused by worn gaskets Compatibility Carburetor Model Size Type Dellorto DRLA 36mm Dual Barrel Downdraft Dellorto DRLA 40mm Dual Barrel Downdraft Dellorto DRLA 45mm Dual Barrel Downdraft Dellorto DRLA 48mm Dual Barrel Downdraft Kit Contents Component Quantity Top Cover Gasket 2 Float Bowl Gasket 2 Pump Diaphragm 2 Needle Valve Assembly 5 (150/170/200/225/250) O-Ring Set Complete Top Cover Screws 5 Pump Housing Screws 4 Why Rebuild Your Dellorto DRLA? Fix Fuel Leaks: Worn gaskets and O-rings are the #1 cause of fuel leaks on aging DRLA carbs Smooth Idle: Replace hardened diaphragms to restore proper idle and acceleration pump function Better Fuel Economy: Properly sealed carb runs more efficiently Tune for Performance: Multiple needle valve sizes let you dial in fuel delivery for different engine setups Frequently Asked Questions Q: Will this kit work with my 40mm DRLA?A: Yes, this kit is compatible with all DRLA sizes — 36mm, 40mm, 45mm, and 48mm. Q: What needle valve size should I use?A: It depends on your engine setup and fuel pressure. 200-225 is typical for most applications. Start with 200 and adjust based on fuel level in the bowl. Q: Are instructions included?A: Basic diagram included. We recommend referencing a Dellorto DRLA service manual for complete rebuild steps and float height specifications. Q: Does this kit fit Dellorto DHLA carbs?A: This kit is specifically for DRLA downdraft carbs. DHLA sidedraft carbs use different gaskets. Please check your carb model before ordering. Q: How often should I rebuild my Dellorto carb?A: Every 2-3 years for daily drivers, or whenever you notice fuel leaks, rough idle, or hesitation on acceleration. Related Products Explore more products from our Carburetors & Fuel System collection: All Carburetors & Fuel System — Browse our complete selection Fuel Filters & Water Separators — Protect your fuel system Oil Filters — Premium filtration for diesel engines
$39.99
iFJF Duramax LMM EGR Delete Kit — 2007.5–2010 Chevy Silverado GMC Sierra 2500HD 3500HD 6.6L V8 Turbo Diesel | iFJF
Product Overview The Duramax LMM EGR Delete Kit is a comprehensive emissions system bypass solution for 2007.5-2010 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks equipped with the 6.6L LMM Duramax turbo diesel. This kit eliminates the failure-prone EGR cooler and valve system — the leading cause of coolant loss, intake carbon buildup, and reduced performance on LMM-platform trucks. For off-road/competition use only. Key Features Stainless Steel Passenger Up-Pipe: T304 stainless steel mandrel-bent up-pipe replaces the restrictive EGR-equipped factory pipe. Precision TIG-welded for leak-free exhaust flow. CNC Billet Aluminum Block-Off Plates: 6061-T6 aluminum plates with laser-cut gaskets seal the EGR valve and EGR cooler ports permanently. Complete Gasket & Hardware Kit: Includes MLS (multi-layer steel) exhaust gaskets and Grade 10.9 hardware — everything needed for installation. Eliminates EGR Cooler Failure: The LMM EGR cooler is a known catastrophic failure point — when it cracks internally, coolant enters the intake and can hydrolock the engine. Delete it, delete the risk. Improved Intake Cleanliness: No more carbon/soot recirculation into the intake manifold. Keeps intake runners, valves, and MAP sensor clean for consistent performance. Compatibility Year Make Model Engine 2007.5-2010 Chevrolet Silverado 2500HD 6.6L LMM Duramax V8 Turbo Diesel 2007.5-2010 Chevrolet Silverado 3500HD 6.6L LMM Duramax V8 Turbo Diesel 2007.5-2010 GMC Sierra 2500HD 6.6L LMM Duramax V8 Turbo Diesel 2007.5-2010 GMC Sierra 3500HD 6.6L LMM Duramax V8 Turbo Diesel Important Notes ⚠️ OFF-ROAD / COMPETITION USE ONLY — Not legal for on-road vehicles under EPA/CARB regulations. ⚠️ ECU TUNING REQUIRED — This kit includes hardware only. You must use an aftermarket tuner (EFILive, EZ Lynk, HPTuners) to disable EGR-related DTCs or the check engine light will illuminate. ⚠️ Professional Installation Recommended — Up-pipe replacement requires turbocharger removal on LMM models. Budget 4-6 hours for installation. Frequently Asked Questions Q: What's included in this LMM EGR delete kit?A: This kit includes: (1) Passenger-side EGR up-pipe (stainless steel), (2) EGR valve block-off plate (billet aluminum), (3) EGR cooler block-off plates, (4) All required gaskets and hardware. ECU tuning is required to prevent DTCs and check engine light.Q: Do I need ECU tuning after installing this kit?A: Yes. Removing the EGR system will trigger diagnostic trouble codes (P0401-P0408). You will need a tuner or custom ECU tune to disable EGR-related DTCs and prevent limp mode. This kit includes hardware only — not tuning.Q: Is this legal for street use?A: No. This EGR delete kit is intended for OFF-ROAD / COMPETITION USE ONLY. Removing emissions equipment from on-road vehicles violates EPA Clean Air Act regulations. Please check your local laws before purchase.Q: What are the benefits of deleting the EGR on an LMM Duramax?A: EGR delete eliminates carbon/soot recirculation into the intake — preventing intake manifold clogging, reducing EGTs, improving throttle response, and eliminating the failure-prone EGR cooler (a known failure point that can cause coolant loss and hydrolock on LMM engines).
$157.39
iFJF 6.6L Duramax LLY EGR Delete Kit for 2004-2005 Chevy GMC Silverado Sierra 2500HD 3500HD
Product Overview The iFJF 6.6L Duramax LLY EGR Delete Kit is engineered specifically for 2004-2005 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD trucks equipped with the 6.6L Duramax LLY turbo diesel engine. The LLY was the first Duramax generation to include an EGR system, and the EGR cooler — mounted in the valley of the engine — is prone to cracking and leaking coolant into the intake. This comprehensive kit provides everything needed to permanently remove the EGR valve, EGR cooler, and associated plumbing, dramatically improving engine reliability. For off-road and competition use only. Key Features Complete EGR System Removal — Includes block-off plates for the exhaust up-pipe, intake manifold EGR port, and coolant passages. Removes EGR valve and EGR cooler entirely. Eliminates LLY EGR Cooler Failure — The LLY EGR cooler is located in the engine valley and is notorious for cracking internally. When it fails, coolant floods the intake — potentially causing hydrolock and catastrophic engine damage. Precision-Machined Steel Plates — CNC-manufactured block-off plates with anti-corrosion coating ensure a permanent, leak-free seal on all mating surfaces. High-Temperature Gaskets — Multi-layer gaskets designed to withstand Duramax exhaust temperatures without degradation. Lower EGTs & Cooler Operation — Removing EGR flow drops exhaust gas temperatures by 100-200°F under load, reducing thermal stress on turbocharger and pistons. Improved Throttle Response & Fuel Economy — Clean, cool intake air burns more efficiently, delivering better throttle feel and measurable MPG improvements. Compatibility Year Make Model Engine 2004-2005 Chevrolet Silverado 2500HD / 3500HD 6.6L Duramax LLY V8 Turbo Diesel 2004-2005 GMC Sierra 2500HD / 3500HD 6.6L Duramax LLY V8 Turbo Diesel Note: This kit is for the LLY engine (VIN code "2", 8th digit). It does NOT fit LB7 (2001-2004), LBZ (2006-2007), LMM (2007.5-2010), or LML (2011-2016) Duramax engines. Specifications Specification Detail Plate Material CNC-Machined Steel, Anti-Corrosion Finish Gasket Type Multi-Layer High-Temp Rated Application EGR Valve + EGR Cooler Delete Engine 6.6L Duramax LLY (VIN Code 2) Estimated Install Time 4-6 Hours Difficulty Level Advanced (Professional Recommended) Tuning Required Yes — EFILive / HP Tuners / EZ Lynk Compatible SKU ER-0028 What's Included Exhaust up-pipe block-off plate with gasket Intake manifold EGR port block-off plate with gasket EGR cooler coolant passage block-off plates (pair) All required mounting bolts, studs, and washers (Grade 10.9) Detailed installation instructions with torque specifications The Duramax LLY EGR Problem When GM introduced the LLY Duramax in 2004, it added an EGR system to meet tightening emissions standards. The EGR cooler — a heat exchanger mounted in the hot engine valley — became one of the most problematic components ever fitted to a Duramax engine. The extreme temperature cycling (ambient to 1,200°F exhaust and back) causes the internal brazed joints to fatigue and crack. When this happens, pressurized coolant from the engine's cooling system leaks directly into the intake manifold. The result can range from white smoke and coolant loss to complete engine hydrolock. Replacing a failed EGR cooler with another OEM unit costs $800-$1,200 in parts alone — and the replacement will eventually fail the same way. Deleting the system is the only permanent fix. Frequently Asked Questions Q: Will this fit my 2006 LBZ Duramax?A: No. This kit is specifically for the 2004-2005 LLY engine (VIN code "2"). The LBZ (2006-2007) has a different EGR system and intake manifold design. We offer separate EGR delete kits for LBZ and LMM Duramax engines. Q: Is this a complete kit or do I need additional parts?A: This is a complete hardware kit — everything you need to physically delete the EGR system is included. You will also need a custom ECU tune (sold separately) to disable EGR-related DTCs. We recommend replacing the intake manifold gaskets and performing a coolant flush during installation. Q: How difficult is LLY EGR delete compared to 6.0L Powerstroke?A: The LLY EGR cooler is mounted in the engine valley, requiring removal of the intake manifold, fuel rails, and various brackets and wiring. It is more labor-intensive than the 6.0L Powerstroke EGR delete. Expect 4-6 hours for a competent DIY mechanic, or 3-4 hours of shop labor. Q: Will my truck pass emissions after EGR delete?A: No. EGR system removal will cause the vehicle to fail any emissions inspection. This kit is strictly for OFF-ROAD / COMPETITION USE ONLY. It is the purchaser's responsibility to ensure compliance with all applicable federal, state, and local laws. Q: What are the signs that my LLY EGR cooler is failing?A: Watch for unexplained coolant loss, white smoke from the exhaust (especially at cold start), a sweet smell from the exhaust, coolant residue around the EGR valve, and rising engine temperatures. If you observe these symptoms, stop driving immediately — continued operation risks hydrolock and complete engine destruction. Q: Do I need to upgrade anything else when deleting the EGR?A: Deleting the EGR is a great time to address other LLY weak points: consider upgrading the turbo mouthpiece (the OEM plastic piece cracks), installing a lift pump (the LLY CP3 injection pump is sensitive to fuel supply issues), and adding an EGT gauge to monitor post-delete temperatures. ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Duramax Diesel Resources & Maintenance 📖 Related Guides: L5P Duramax Fuel Filter Housing Cap Replacement — Complete DIY Guide Duramax Fuel Filter Housing: Compatibility Guide (2001–2024) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🔍 Shop All Duramax 6.6L Parts → | EGR Delete Parts → | Exhaust System →
$69.99
iFJF iFJF 0203-1061 Kompact Dual Port Exhaust Valve For Ford Focus ST 2.0L Turbo
Product Overview High-quality aftermarket 0203-1061 Kompact Dual Port Exhaust Valve For Ford Focus ST 2.0L Turbo — precision-engineered for reliable fuel/air metering and direct bolt-on fitment. Manufactured to meet or exceed OEM specifications at a fraction of dealer pricing. Key Features Precision Manufacturing: CNC-machined components ensure exact tolerances and smooth throttle response OEM-Spec Materials: Constructed from durable die-cast aluminum and corrosion-resistant components that withstand high temperatures and fuel exposure Direct Fitment: Designed as a direct bolt-on replacement — no modifications or adapters required for installation Flow-Tested: Each unit undergoes quality control testing to verify proper fuel and air metering calibration Complete Assembly: Comes fully assembled and pre-adjusted for out-of-the-box installation — saves hours of setup time Compatibility Information This carburetor & fuel system is designed to replace the factory original equipment on compatible vehicles. Please verify your vehicle's year, make, model, and engine specifications before ordering. Contact our support team if you need assistance confirming fitment for your specific application. Technical Specifications Specification Details Product Type Carburetor & Fuel System Condition New Aftermarket Installation Direct Bolt-On Replacement Warranty 1-Year Replacement Warranty Shipping Same-Day on Orders Before 2 PM EST Why Choose iFJF Direct? At iFJF Direct, we specialize in high-quality aftermarket automotive parts for gasoline and diesel engines. Every product is sourced from trusted manufacturers and backed by our satisfaction guarantee. We stock inventory in our US warehouse and ship same-day on orders placed before 2 PM EST. Installation Tips Always disconnect the battery before starting any fuel system work Use new gaskets and seals — reusing old gaskets is the #1 cause of vacuum leaks and poor idle Double-check all linkage connections and throttle operation before starting the engine Perform a final fuel leak check after installation with the engine running at idle and under throttle Allow a short break-in period for gaskets to fully seat before final tuning adjustments Frequently Asked Questions Q: Will this fit my vehicle?A: Please verify your specific year, make, model, and engine against the compatibility information listed in the product title. If unsure, contact our support team with your VIN. Q: Is this a genuine OEM part?A: This is a high-quality aftermarket replacement manufactured to OEM specifications. It offers equivalent or superior performance at significantly lower cost than OEM dealer parts. Q: Does this come pre-tuned?A: Yes, the unit comes pre-adjusted from the factory for typical applications. Minor idle mixture and speed adjustments may be needed for your specific engine setup and altitude. Q: What's included in the box?A: The complete assembly as shown in product images, mounting gasket(s), and basic installation instructions. Verify included components match your application before installation. Q: What is your return policy?A: 90-day return policy for unused items in original packaging. Defective products covered under 1-year warranty. See our Returns page for full details.
$69.99