Search results for "Pool Cleaner Parts"

Product Overview The EC781 Oil Filter Cap is a precision-engineered replacement for the OEM plastic oil filter housing cap found on 2003-2010 Ford F-Series Super Duty trucks and Excursion SUVs with the 6.0L and 6.4L Powerstroke diesel engines. Designed to replace OEM part numbers 3C3Z-6766-CA and 1840754C91, this cap provides reliable sealing and easy removal for every oil change. Key Features Precision 36mm Hex Drive: Sharp, well-defined hex flats ensure your socket grips firmly — no slipping, no rounding, unlike worn OEM plastic caps. Exact OEM Fitment: Identical thread pitch, height, and sealing surface to the factory cap. Drop-in replacement — threads into your existing oil filter housing. Includes Replacement O-Ring: New O-ring seal included. Always replace the O-ring at every service to prevent the slow oil seepage that's common when old seals are reused. Compatible with All FL2016 Cartridges: Works with Motorcraft, WIX, Baldwin, Fleetguard, and all aftermarket FL2016/PF2016-spec filter elements. Compatibility Year Make Model Engine 2003-2007 Ford F-250/F-350/F-450/F-550 Super Duty 6.0L Powerstroke V8 2008-2010 Ford F-250/F-350/F-450/F-550 Super Duty 6.4L Powerstroke V8 2003-2005 Ford Excursion 6.0L Powerstroke V8 2003-2010 Ford E-350/E-450 Super Duty Van 6.0L Powerstroke V8 Specifications Specification Value Part Number FJ-CAP03-CK OE Cross Reference 3C3Z-6766-CA, 1840754C91 Socket Size 36mm Hex Torque Specification 18-22 ft-lbs (25-30 Nm) Filter Compatibility FL2016, PF2016, 57316, BT7349, LF16161 Includes Filter Cap + Replacement O-Ring Seal Frequently Asked Questions Q: Is this the same as the OEM plastic cap?A: It's a direct dimensional replacement but made from higher-quality materials. The OEM cap (3C3Z-6766-CA) is injection-molded plastic that fails over time. Our EC781 cap is engineered for durability with precise machining for reliable socket engagement every oil change.Q: Does this cap come with an O-ring?A: Yes. A new O-ring seal is included. Always replace the O-ring at every oil change — reusing old O-rings is the #1 cause of oil filter housing leaks on 6.0L/6.4L engines.Q: What is the correct installation torque?A: Tighten to 18-22 ft-lbs (25-30 Nm). Hand-tighten until the O-ring contacts the housing, then 1/4 turn with a torque wrench and 36mm socket. Do NOT exceed 25 ft-lbs — over-torquing can damage the aluminum housing threads.Q: Does this cap fit all FL2016 filter cartridges?A: Yes. Compatible with Motorcraft FL2016, WIX 57316, Baldwin BT7349, Fleetguard LF16161, and all other FL2016/PF2016-spec cartridges.

Read more less

Product Overview Protect your fuel injection system with the 500054702 Fuel Filter for Iveco Daily V 2.3L Diesel (2011-2014) from iFJF. This premium fuel filter delivers superior contaminant removal, safeguarding your injectors, injection pump, and entire fuel system from harmful debris, water, and particulate matter. Engineered as a direct OEM replacement for 500054702, this filter features high-efficiency filtration media that captures particles as small as specified microns. Whether you're maintaining a daily driver, work truck, or fleet vehicle, this filter ensures clean fuel delivery at every RPM. Key Features Specified Micron Filtration: High-efficiency media captures contaminants before they reach your injection system Water Separation: Separates emulsified water from diesel fuel, protecting injectors from corrosion High Flow Rate: Maintains proper fuel flow under high-demand conditions — towing, hauling, highway driving Durable Construction: Heavy-duty canister resistant to pressure spikes and vibration Direct OEM Fit: Exact dimensions, thread pattern, and gasket seal match the factory filter Multi-Fuel Compatible: Works with ULSD, biodiesel blends up to B20, and gasoline Specifications Specification Detail Part Type Fuel Filter / Fuel Water Separator Filtration Rating specified Micron Nominal Media Type High-Efficiency Cellulose/Synthetic Blend OEM Cross-Reference 500054702 Fuel Type Diesel / Gasoline / Biodiesel (up to B20) Service Interval Every 15,000-25,000 miles or 12 months Installation Guide Safety First: Park on level ground, engage parking brake, allow engine to cool Relieve Pressure: Open fuel cap to relieve tank pressure Remove Old Filter: Use filter wrench if needed — have catch pan ready for fuel spillage Clean Surface: Wipe filter housing clean of debris and old gasket material Lubricate Gasket: Apply thin film of clean diesel to new filter's gasket Install: Hand-tighten until gasket contacts, then 3/4 turn more Prime System: Turn ignition ON (without starting) for 30 seconds, repeat 2-3 times Check: Start engine and check for leaks Why Choose iFJF Filters? Quality Tested: Every filter undergoes burst pressure, efficiency, and flow rate testing US-Based Support: Ships from US warehouses with real tracking Best Value: OEM-equivalent quality at a fraction of dealer pricing 30-Day Guarantee: Not satisfied? Free replacement or full refund Frequently Asked Questions Q: How often should I replace this fuel filter?A: For diesel engines: replace every 15,000-25,000 miles or annually. For vehicles operating in dusty conditions or using biodiesel, change every 10,000-15,000 miles. Q: Is this a direct OEM replacement?A: Yes. Manufactured to meet or exceed OEM specifications for fit, filtration efficiency, and flow rate. Direct drop-in replacement. Q: What micron rating is this filter?A: This filter has a specified micron filtration rating, providing excellent contaminant removal while maintaining proper fuel flow. Q: Can I use this with biodiesel?A: Yes, compatible with diesel up to B20 biodiesel blends. For B20+, more frequent changes recommended due to biodiesel's solvent properties. Q: What are signs of a clogged fuel filter?A: Hard starting, rough idle, hesitation under acceleration, decreased fuel economy, and check engine light. Replace immediately if you notice these. Q: What's included in the package?A: The package includes the fuel filter element(s) as described in the title and product images. Multi-packs provide bulk value for fleet maintenance. 🔗 Related Products Looking for more? Browse our related products or check out our Best Sellers.

Read more less

Product Overview The Benz W204 C300 E350 Front Lower Forward Control Arm w/Ball Joint is a premium-quality replacement part designed for Benz. Engineered to meet or exceed OEM specifications, this part delivers reliable performance and long service life. Whether you're a professional mechanic or a DIY enthusiast, iFJF parts provide the quality and value you expect. Key Features Direct OEM replacement with precise fitment for hassle-free installation Manufactured to meet or exceed OEM specifications Rigorously tested for durability and long service life Compatibility This part is compatible with the following vehicles and applications: W204 C300 E35 Benz vehicles (see fitment guide) Important: Always verify fitment against your specific vehicle year, make, and model before ordering. Technical Specifications Brand iFJF Part Number seguler Condition New Package Includes As shown in product images — 6 images Material High-Grade Steel/Composite Warranty 30-Day Satisfaction Guarantee Why Choose iFJF? Premium Quality: Every part undergoes rigorous quality control testing Perfect Fit: Precision-engineered for seamless installation Fast Shipping: Products ship from US warehouses within 1-2 business days Customer Support: Expert technical support available for all products 30-Day Guarantee: Shop with confidence with our satisfaction guarantee Installation Notes This part is designed for straightforward installation. Professional installation is recommended for suspension and drivetrain components. Always refer to your vehicle's service manual for torque specifications and proper procedures. Frequently Asked Questions Q: What vehicles is this compatible with?A: This Benz W204 C300 E350 Front Lower Forward is designed for Benz. Please verify your specific year/make/model using the fitment guide above before ordering. Q: Is this a direct OEM replacement?A: Yes, this part is manufactured to meet or exceed OEM specifications for a direct fit without modifications. Q: What material is this made from?A: High-grade materials selected for durability and performance. Premium-grade steel and composite materials. Q: Do you offer a warranty?A: Yes, all iFJF products come with a 30-day satisfaction guarantee. If you're not satisfied, contact us for a replacement or refund. Q: How fast is shipping?A: We ship within 1-2 business days from our US warehouses. Delivery typically takes 3-7 business days depending on your location.

Read more less

Product Overview The iFJF P559803 Fuel Filter is a high-performance 4 Micron fuel filter designed specifically for Agricultural Machinery — Tractors 6650/6750/6850/678HTA/TR97. Engineered to protect your fuel injection system from harmful contaminants, water, and debris, this filter meets or exceeds OEM specifications for filtration efficiency and flow rate. Key Features 4 Micron High-Efficiency Filtration: Removes 99% of harmful particles and water from diesel fuel, protecting high-pressure common rail injectors and fuel pumps Heavy-Duty Construction: Reinforced steel housing with corrosion-resistant coating withstands extreme operating temperatures and vibration Optimal Flow Rate: Up to 100 GPH ensures consistent fuel delivery even under maximum load conditions Water Separation Technology: Advanced hydrophobic media separates emulsified water from fuel, preventing injector tip erosion and microbial growth OEM Matched Fit: Precision-engineered threads and gasket profile ensure leak-free installation every time Compatibility Make / Application Engine Year Range Agricultural Machinery Heavy-Duty Diesel Engines All Compatible Years Specifications Specification Value Part Number P559803 Filtration Rating 4 Micron Flow Rate Up to 100 GPH Filter Type Spin-On with Water Separation Material Heavy-gauge steel with anti-corrosion coating Replaces OEM AR86755, 6N7617, 4024223 Why Choose iFJF Heavy-Duty Filters Modern diesel engines with common rail injection systems operate at pressures exceeding 30,000 PSI. Contaminated fuel can destroy injectors in minutes, leading to repairs costing thousands of dollars. Our P559803 fuel filter provides the first line of defense, meeting or exceeding the filtration performance of OEM filters at a fraction of the dealership price. Every filter is manufactured in ISO 9001 certified facilities and tested to ensure consistent quality. Frequently Asked Questions Q: How often should I replace the P559803 fuel filter?A: For heavy-duty diesel applications, replace every 15,000-25,000 miles or every 500 hours of operation, whichever comes first. For agricultural equipment, replace annually or per your equipment manufacturer's schedule. Q: What happens if I don't replace my fuel filter on time?A: A clogged fuel filter restricts fuel flow, causing power loss, poor acceleration, hard starting, and reduced fuel economy. In severe cases, bypassed contaminants can damage high-pressure fuel pumps and injectors — repairs that often exceed $5,000. Q: Is this filter compatible with biodiesel blends?A: Yes. Our filter media is compatible with biodiesel blends up to B20. However, biodiesel has stronger solvent properties and may release accumulated deposits in older fuel systems, requiring more frequent filter changes initially. Q: How do I prime the fuel system after filter replacement?A: Fill the new filter with clean diesel fuel before installation. After installing, cycle the key to the "ON" position (without starting) 3-4 times to activate the electric lift pump. For engines without a lift pump, use the manual primer pump (if equipped) or consult your service manual. Q: Does this filter require any special tools for installation?A: A standard oil filter wrench or strap wrench is sufficient for most applications. Always lubricate the gasket with clean diesel fuel before installation and hand-tighten, then turn an additional 3/4 turn. Related Products Complete your diesel fuel system maintenance: FS1003 Fuel Water Separator for Cummins FS1098 Fuel Water Separator w/ PCV PF7977 Fuel Filter for Ram 5.9L Cummins

Read more less

RV Air Conditioner Soft Start Kit — 364 Compatible Most RV air conditioners draw 50-70 amps on startup — enough to trip a 30A breaker or stall a portable generator. This soft start kit reduces inrush current by up to 70%, letting you run your A/C on a small 2000W generator, 30A shore power, or even a battery/inverter setup. Compatible with popular 364 soft start systems. Perfect for boondocking, campgrounds with limited power, or saving your generator from hard starts. Key Features 70% Startup Surge Reduction — Ramps the compressor gently instead of slamming it with full current. Your generator won't stall, your breaker won't trip. Runs on 2000W Generator — A standard 13,500 BTU RV A/C normally needs 3000W+ to start. With this kit, a 2000W generator is sufficient. 364 System Compatible — Plug-and-play replacement or upgrade for 364-type soft start systems. Same wiring, same footprint. Protects Your A/C Compressor — Soft starting reduces mechanical shock on the compressor, extending its service life. DIY Friendly — Includes wiring diagram and mounting hardware. Basic electrical knowledge required. 30-60 minute install. Universal Fit — Works with most rooftop RV air conditioners: Dometic, Coleman, Advent, Atwood, Furrion, and others. Compatibility Brand Models BTU Range Dometic Brisk Air II, Penguin II, Blizzard NXT 11,000 - 15,000 BTU Coleman Mach 1, Mach 3, Mach 8, Mach 10, Mach 15 9,200 - 15,000 BTU Advent AC135, AC150 13,500 - 15,000 BTU Atwood / Dometic Air Command, 15030 13,500 - 15,000 BTU Furrion Chill, FACR 13,500 - 15,500 BTU Technical Specifications Input Voltage: 110-120V AC, 60Hz Max Compressor: Up to 16,000 BTU Startup Current Reduction: 60-70% Package Includes: Soft start module, wiring harness, mounting bracket, hardware kit, installation guide Why Choose iFJF? Without a soft start, every A/C cycle puts enormous stress on your generator, breaker panel, and compressor. The result: tripped breakers on hot days, generator overloads, and premature compressor failure. Our soft start kit gives you freedom to camp anywhere — national park with 30A only, boondocking with a small generator, or driveway camping on a 15A household outlet. Frequently Asked Questions Q: Will this work with my RV's A/C unit?A: Compatible with most single-compressor rooftop RV A/C units up to 16,000 BTU. Check the compatibility table above. If your unit isn't listed, contact us with your make/model for confirmation. Q: Can I really run my A/C on a 2000W generator?A: Yes. A 13,500 BTU A/C normally needs 2800-3000W to start. The soft start drops startup surge by 60-70%, making a 2000W generator sufficient. Still need headroom for other loads like microwave. Q: Is this hard to install?A: Basic electrical skills required. Wiring into compressor circuit on the rooftop unit. Clear wiring diagram and hardware included. Typical install: 30-60 minutes. Professional install recommended if uncomfortable with 120V AC. Q: Will this damage my A/C compressor?A: No — it protects the compressor. Soft starting reduces mechanical shock and current inrush, actually extending compressor life. Same technology used in residential HVAC. Q: Does this work with inverter generators?A: Yes, inverter generators benefit the most. Their eco-mode can't handle hard-start surges. The soft start solves this perfectly. Q: Do I need one per A/C unit?A: Yes, each rooftop A/C needs its own soft start kit. Dual A/C setups require 2 kits. Related Products Cummins Onan RV Generator Filter Kit RV Water Heater Circuit Board Coleman RV AC Hard Start Capacitor

Read more less

Product Overview The iFJF EGR Delete Kit for 6.6L Duramax LML diesel engines provides a complete, bolt-on solution to eliminate the problematic exhaust gas recirculation (EGR) system from your 2011–2016 Chevrolet Silverado or GMC Sierra 2500HD/3500HD. Crafted from stainless steel and billet aluminum, this kit replaces the failure-prone factory EGR valve, cooler, and all associated plumbing with high-quality block-off plates and a bypass hose. Key Features Stainless Steel & Billet Aluminum — Premium materials, corrosion resistant Complete EGR System Removal — Valve, cooler, and all plumbing eliminated No More Plugged or Leaking EGR — Permanent solution to common LML EGR failures Quicker Turbo Spool — Lower EGTs, better throttle response Faster Coolant Recirculation — Lower overall coolant temperatures Longer Lasting — Stronger and more durable than OEM EGR components Direct Bolt-On Replacement — Retains stock intake and exhaust manifolds Vehicle Compatibility Year Make Model Engine 2011–2016 Chevrolet / GMC Silverado / Sierra 2500HD 6.6L Duramax LML 2011–2016 Chevrolet / GMC Silverado / Sierra 3500HD 6.6L Duramax LML Package Includes 1 × Air Intake Closing Plate 1 × Exhaust Block-Off Plate 1 × Three-Terminal Cooling Hose 4 × Hose Clamps 8 × Mounting Screws Complete Hardware Kit Note: This kit deletes the EGR actuator valve and cooler while retaining your factory intake and exhaust manifold. Direct replacement — no modification needed. Installation instructions are not included; professional installation is highly recommended. Performance Benefits Eliminates Soot Buildup — No more clogged EGR valves restricting flow Lower Coolant Temperatures — Faster recirculation without the EGR cooler in the loop Quicker Turbo Spool — Reduced exhaust restriction = faster boost response Lower EGTs — Exhaust gas temps run cooler without EGR recirculation No More EGR Cooler Failures — Most common LML failure point eliminated entirely Installation Professional installation is highly recommended. A tuner with EGR-delete capability is required to prevent check engine lights and diagnostic trouble codes. This kit is a direct bolt-on replacement — no modification to factory components is needed beyond removing the EGR system. Frequently Asked Questions Q: Will my truck throw a check engine light after installing this?A: Yes, unless you use an EGR-delete-capable tuner to suppress the related diagnostic trouble codes. Q: Can I install this without removing the intake manifold?A: The intake manifold stays in place. This kit is designed to work while retaining your factory intake and exhaust manifolds. Q: Is this compatible with a DPF delete?A: Yes, this kit works perfectly alongside a DPF/CAT delete pipe. In fact, many customers install both as a complete emissions delete package. Q: How long does installation take?A: Approximately 2–3 hours for a professional mechanic. DIY installers should budget 3–5 hours depending on experience. Related Products Shop DPF Delete Pipes for Duramax LML Shop All EGR Delete Kits Duramax LML Intake Elbow Bridge ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Duramax Diesel Resources & Maintenance 📖 Related Guides: L5P Duramax Fuel Filter Housing Cap Replacement — Complete DIY Guide Duramax Fuel Filter Housing: Compatibility Guide (2001–2024) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🔍 Shop All Duramax 6.6L Parts → | EGR Delete Parts → | Exhaust System →

Read more less

Product Overview The iFJF 1901R Quadrajet 4MV 750 CFM carburetor is a premium replacement for 1968-1973 Chevrolet and GMC trucks equipped with 327, 350, 396, 402, and 454 V8 engines. Featuring vacuum secondaries, manual choke, and a distinctive golden finish, this carburetor delivers the legendary Quadrajet spread-bore design in a brand new, ready-to-run package — no core charge, no rebuilding hassles. Key Features 750 CFM Spread-Bore Design — Small primaries for fuel economy and crisp part-throttle response; massive secondaries for full-throttle power when towing or hauling. Vacuum Secondary Operation — Secondaries open only when the engine demands it, preventing bogging and improving fuel economy compared to mechanical secondary carbs. Manual Choke — Cable-operated choke for reliable cold starts. Simple mechanical operation with no vacuum diaphragms or electrical connections to fail. Golden Chromate Finish — Corrosion-resistant coating that maintains its appearance and protects the aluminum body from fuel degradation and oxidation. Complete Assembly — Pre-calibrated and wet-flow tested. Includes base gasket and mounting hardware. Compatibility Year Make Models Engine 1968-1972 Chevrolet C10, C20, C30, K10, K20, K30 327, 350, 396, 402, 454 1973 Chevrolet C10, C20, C30, K10, K20 350, 454 1968-1972 GMC 1500, 2500, 3500, C15, C25, K15, K25 327, 350, 396, 402 1973 GMC 1500, 2500, C15, C25, K15, K25 350, 454 1968-1973 Chevrolet Suburban, Blazer 350, 396, 454 Specifications Parameter Value Part Number 1901R OEM Cross-Reference 7026202, 7026203, 7026210, 7027202, 7027203, 7042202 CFM Rating 750 CFM Barrel Configuration 4-Barrel (Spread Bore / Square Bore Compatible) Choke Type Manual Choke Secondary Vacuum-Operated Air Valve Body Material Die-Cast Aluminum (Golden Chromate) Why iFJF 1901R for Your Classic Truck? The Quadrajet was GM's workhorse carburetor for over two decades. But original units are now 50+ years old — warped air horns, leaking well plugs, and worn throttle shafts are common problems. Our 1901R gives you the legendary Quadrajet design with modern manufacturing: precision CNC-machined metering circuits, properly sealed well plugs, and a brand new casting that hasn't been through 50 years of heat cycling. The result is a carburetor that starts easier, idles smoother, and delivers the fuel economy these trucks were known for when new. Frequently Asked Questions Q: Will this fit my 1970 C10 with a 350?A: Yes, this is a direct replacement for your 1970 C10 350. The 1901R bolts to the factory Quadrajet intake manifold and uses the same throttle linkage and fuel line connection. Q: Do I need to change my intake manifold?A: No. The 1901R fits the factory cast iron Quadrajet intake manifold found on 1968-1973 GM trucks. No adapter needed. Q: How do I connect the throttle linkage?A: The throttle lever accepts the factory GM throttle cable and transmission kickdown cable (TH350/TH400). The geometry matches OEM specifications. Q: Is this carburetor good for towing?A: Absolutely. The Quadrajet's small primaries provide excellent fuel economy during cruise while the massive secondaries deliver full power for towing and hauling heavy loads. Q: Can I convert this to electric choke?A: This model is manual choke only by design. If you prefer electric choke, see our other Quadrajet-style options. Q: What fuel pressure do I need?A: 5-6 PSI maximum. Stock mechanical fuel pumps are ideal. If using an electric pump, install a regulator set to 5 PSI.

Read more less

Product Overview The iFJF Downstream NOx Sensor 5WK96645H is a direct replacement for 2011-2016 GM Duramax 6.6L LML and LGH diesel engines. This sensor monitors nitrogen oxide (NOx) levels after the Selective Catalytic Reduction (SCR) system to verify proper DEF fluid dosing and emissions compliance. A failed NOx sensor triggers the check engine light, derates engine power, and may force the truck into limp mode — replace it promptly to restore full engine performance. Key Features Exact Fit for LML/LGH Duramax: Designed specifically for 2011-2016 Chevrolet Silverado and GMC Sierra 2500HD/3500HD with the 6.6L LML or LGH Duramax diesel. Downstream (post-SCR) position. True Plug-and-Play: Pre-calibrated from the factory — no dealer programming, VIN coding, or scan tool subscription required. Install, clear DTCs, and the ECU recognizes the sensor automatically. OE-Grade Sensing Element: Uses the same wideband zirconia sensing technology as the OEM Continental/VDO sensor for accurate, consistent NOx concentration readings to the ECU. OEM Cross-Reference: Directly replaces GM part numbers 12669595 and 12671388, as well as the Continental 5WK96645H sensor. Severe-Duty Construction: Sealed 6-pin connector with gold-plated terminals resists corrosion from road salt and under-hood chemicals. Stainless steel probe body withstands extreme diesel exhaust temperatures. Compatibility Make Model Engine Years Chevrolet Silverado 2500HD / 3500HD 6.6L LML Duramax 2011-2016 GMC Sierra 2500HD / 3500HD 6.6L LML Duramax 2011-2016 Chevrolet Express / Savana 2500/3500 6.6L LGH Duramax 2011-2016 Note: This is the DOWNSTREAM sensor (post-SCR catalyst). Verify your fault code indicates downstream position before ordering. For off-road and competition use only. Specifications Specification Details Part Number 5WK96645H GM OE Numbers 12669595, 12671388 Position Downstream (Post-SCR Catalyst) Connector Type 6-Pin Sealed, Gold-Plated Terminals Probe Material Stainless Steel Application Off-Road / Competition Use Only Why Choose iFJF NOx sensor failure is one of the most common LML Duramax issues — and GM dealer replacement can exceed $500 per sensor. Our 5WK96645H provides identical functionality at a fraction of the dealer price, with no programming required. Save hundreds and get your truck out of limp mode today. 90-day satisfaction guarantee. Frequently Asked Questions Q: How do I know if my NOx sensor is bad?A: Common symptoms include check engine light with DTCs P2200-P2203 or P229E-P22A0, reduced engine power / limp mode, poor fuel economy, excessive DEF consumption, or failed emissions test. A scan tool reading showing the sensor stuck at a fixed value or out of normal range confirms failure. Q: Do I need to program this sensor after installation?A: No. This sensor arrives pre-calibrated. After installation, use any OBD-II scan tool to clear the fault codes. The ECU recognizes the new sensor automatically — no dealer visit or VIN programming required. Q: Upstream vs downstream — which sensor failed?A: The upstream sensor is before the SCR catalyst, downstream is after. Your DTC description will specify. Common downstream codes: P2200, P2201, P229E. Common upstream: P2202, P2203, P229F. Verify before ordering. Q: How long do NOx sensors typically last?A: Factory NOx sensors typically last 80,000-120,000 miles. Premature failure can be caused by coolant leaking into the exhaust from EGR cooler failure, excessive soot from a failing DPF, or poor-quality DEF fluid. Diagnose the root cause to prevent repeat sensor failure. Related Products Explore more from our full catalog. iFJF Direct offers thousands of quality replacement parts, tools, and accessories for your vehicle. Related Guide Read: Duramax NOx Sensor Replacement: 5WK96645H Diagnostic & Install Guide 📖 Related Guides L5P Duramax Billet vs OEM Fuel Filter Cap Comparison EGR Simulator vs Block-Off Plate: Ford Truck Guide

Read more less

Product Overview The 97188463 LB7 Injector Sleeve Cup is a premium aftermarket replacement part precision-engineered to meet or exceed OEM specifications. Designed specifically for GMC, Ram, Silverado, Sierra, Duramax, 200 2001-2004 (2001, 2004), this direct-fit component delivers reliable performance and straightforward installation — ideal for professional technicians and DIY mechanics alike. Key Features OEM-Spec Construction: Precision-engineered to match original equipment dimensions and performance standards — installs without modification. Durable Materials: Manufactured using high-grade materials selected for excellent wear resistance, corrosion protection, and long service life. Direct Fit Design: Drop-in replacement that matches factory mounting points, connectors, and clearances exactly. Quality Tested: Each unit undergoes thorough inspection and testing before shipment to ensure consistent, reliable performance. Exceptional Value: Matches dealer-part quality at a significantly lower cost — keep your vehicle running right without breaking the bank. Compatibility This injector parts is engineered to fit the following vehicles. Always verify using your VIN or existing OEM part number before ordering. Vehicle Year Range Fitment GMC 2001-2004 Direct Fit Ram 2001-2004 Direct Fit Silverado 2001-2004 Direct Fit Sierra 2001-2004 Direct Fit Duramax 2001-2004 Direct Fit 200 2001-2004 Direct Fit Specifications Specification Detail Brand iFJF Direct Condition New Category Injector Parts Warranty 1-Year Limited Why Choose iFJF Direct? iFJF Direct specializes in premium aftermarket replacement parts that deliver OEM quality without the dealer price tag. Every product is backed by our commitment to accurate fitment, responsive US-based customer support, and fast shipping from our warehouse. Whether you're maintaining a daily driver, restoring a classic, or repairing a fleet vehicle — we're here to help you get the job done right the first time. Installation Guidance Before You Begin: Verify compatibility using your vehicle VIN or existing OEM part number. Clean Work Area: Remove debris, rust, or old gasket material from mating surfaces before installation. Use Proper Tools: Refer to your vehicle's factory service manual for recommended tools and torque specifications. Safety First: Always disconnect the battery before working on electrical components. Wear safety glasses and gloves. Professional Installation: While many of our parts are DIY-friendly, we recommend professional installation if you're unsure about the procedure. Q: Is this a direct replacement for the OEM part?A: Yes, this 97188463 LB7 Injector Sleeve Cup is manufactured to OEM specifications for exact fitment and function. No modifications are required for installation on compatible vehicles. Q: How do I verify this fits my vehicle?A: Check your existing OEM part number against the replacement numbers listed in the description. You can also use the year/make/model fitment guide above or contact our support team with your VIN. Q: What is the warranty period?A: This part is covered by a 1-year limited warranty against manufacturing defects. If you experience any issues, contact us for a free replacement or full refund. Q: How quickly will my order ship?A: Most orders ship within 1-2 business days from our US warehouse. Domestic delivery typically takes 3-7 business days. Tracking information is provided as soon as your order ships. Q: What is your return policy?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're not satisfied, return it in original condition for a full refund. We stand behind every product we sell. Q: How does the quality compare to the dealership part?A: Our aftermarket parts match OEM specifications in material, fit, and performance. You get the same quality and reliability at a significantly lower price — without the dealership markup. Order With Confidence Get your vehicle back on the road with the 97188463 LB7 Injector Sleeve Cup from iFJF Direct. Premium quality, fast shipping, and expert support — all backed by our satisfaction guarantee. Add to cart now and experience the iFJF Direct difference.

Read more less

Overview The iFJF 2002244008 Freezer Door Hinge Plate Replacement Kit restores proper operation and sealing of your RV refrigerator's freezer compartment door. Over time, the original plastic hinge plates on Dometic and Norcold 2-way and 3-way absorption refrigerators become brittle, crack, or snap — leaving your freezer door sagging, misaligned, or completely detached. A door that doesn't seal properly forces the refrigerator to work harder, wastes propane or electricity, and can lead to food spoilage. This complete replacement kit includes both the upper and lower hinge plates needed to rebuild your freezer door mounting. Installation is straightforward and requires only basic hand tools — no refrigeration system knowledge or special skills needed. Save hundreds compared to the cost of replacing the entire refrigerator or paying for RV service center labor. Key Features Complete Hinge Replacement Kit — Includes upper and lower hinge plates, pivot pins, and mounting hardware for a thorough repair Restores Proper Door Seal — Correct door alignment ensures the freezer door gasket seals tightly, improving cooling efficiency Durable Construction — Manufactured from impact-resistant material superior to the brittle factory plastic that commonly fails Broad Compatibility — Fits most Dometic and Norcold 2-way (propane/120V) and 3-way (propane/120V/12V) RV refrigerators DIY-Friendly — Replace in approximately 20-30 minutes with a Phillips screwdriver — no special tools or skills required Prevents Further Damage — Addressing the hinge early prevents stress cracks from spreading to the door panel or refrigerator frame Technical Specifications Specification Details Part Number 2002244008 Compatible Refrigerators Dometic & Norcold 2-Way and 3-Way RV Absorption Refrigerators Includes Upper Hinge Plate, Lower Hinge Plate, Pivot Pins, Mounting Screws Material Impact-Resistant Engineered Plastic Installation Time Approx. 20-30 Minutes Compatibility Brand Type Compatibility Dometic RM, NDR, DM Series (2-Way & 3-Way) ✅ Compatible Norcold N Series (2-Way & 3-Way) ✅ Compatible ⚠️ Verify Before Ordering: This hinge kit fits standard freezer compartment doors on most Dometic and Norcold models. Measure your existing hinge plate dimensions and compare with product photos to confirm fitment for your specific refrigerator model. Installation Guide Empty Freezer — Remove all items from the freezer compartment Remove Door — Carefully lift the freezer door off its hinge pins (may require gentle upward pressure if the bottom hinge is still intact) Remove Old Hinge Plates — Unscrew the broken hinge plates from the refrigerator frame using a Phillips screwdriver Clean Mounting Points — Remove any debris or broken plastic fragments from the hinge mounting area Install New Hinge Plates — Screw the new iFJF upper and lower hinge plates into position; do not overtighten Rehang Door — Align the door pivot points with the new hinges and lower the door into place Test Operation — Open and close the door several times to verify smooth operation and proper gasket seal FAQ Q: How do I know if my freezer door hinge is the problem?A: Signs include: the freezer door sagging or not aligning with the refrigerator frame, difficulty closing the door completely, visible cracks or breaks in the plastic hinge plates, the door falling off when opened past a certain angle, or frost buildup inside the freezer from a poor door seal. Q: Will this kit fit both upper and lower hinges?A: Yes. The kit includes both the upper and lower hinge plates, so you can replace one or both as needed. Even if only one hinge is broken, replacing both ensures even wear and proper alignment. Q: Why did my original hinge plates break?A: The original plastic hinge plates used on many RV refrigerators become brittle over time due to temperature cycling (hot during storage, cold during operation), UV exposure through RV windows, and simply age. The freezer door's weight stresses these small plastic components, and they eventually fatigue and crack. Q: Can I install this without removing the refrigerator from the RV?A: Yes. The freezer door hinge plates are accessible from the front of the refrigerator while it remains installed in the RV cabinetry. No need to disconnect propane, electrical, or remove the refrigerator from its enclosure. Q: Will this hinge kit improve my refrigerator's cooling performance?A: If your freezer door wasn't sealing properly due to hinge misalignment, yes — restoring a proper seal prevents cold air loss and reduces the refrigerator's workload. You may notice faster cool-down times and more consistent temperatures after the repair. Q: Is this compatible with both propane and electric operation?A: The hinge plates have no interaction with the cooling system — they are purely mechanical door mounting components. They work identically whether your refrigerator is operating on propane, 120V AC, or 12V DC. Q: Can I replace just the door gasket while I'm at it?A: If your freezer door gasket is also worn, cracked, or compressed, replacing it along with the hinges is a good idea. However, the gasket is a separate part and not included in this hinge kit. Inspect the gasket while the door is off and consider replacement if it shows signs of wear. Q: How does this compare to the OEM Dometic/Norcold hinge?A: This aftermarket hinge kit is manufactured to OEM specifications with equivalent or improved material durability. Many RV owners report the aftermarket replacement outlasts the OEM hinge due to improved impact-resistant material formulation. 📚 Related Guides & Articles iFJF Guides & Resources — Expert Tips, Installation Tutorials & Buying Guides

Read more less

Product Overview The iFJF P556745 Fuel Filter is a high-performance 7 Micron fuel filter designed specifically for John Deere Agricultural Machinery & Tractors. Engineered to protect your fuel injection system from harmful contaminants, water, and debris, this filter meets or exceeds OEM specifications for filtration efficiency and flow rate. Key Features 7 Micron High-Efficiency Filtration: Removes 99% of harmful particles and water from diesel fuel, protecting high-pressure common rail injectors and fuel pumps Heavy-Duty Construction: Reinforced steel housing with corrosion-resistant coating withstands extreme operating temperatures and vibration Optimal Flow Rate: Up to 90 GPH ensures consistent fuel delivery even under maximum load conditions Water Separation Technology: Advanced hydrophobic media separates emulsified water from fuel, preventing injector tip erosion and microbial growth OEM Matched Fit: Precision-engineered threads and gasket profile ensure leak-free installation every time Compatibility Make / Application Engine Year Range John Deere Agricultural Machinery & Tractors John Deere Diesel Engines All Compatible Years Specifications Specification Value Part Number P556745 Filtration Rating 7 Micron Flow Rate Up to 90 GPH Filter Type Spin-On with Water Separation Material Heavy-gauge steel with anti-corrosion coating Replaces OEM John Deere AR86745, BF959, FF5045, 26667, TP1149, 716974 Why Choose iFJF Heavy-Duty Filters Modern diesel engines with common rail injection systems operate at pressures exceeding 30,000 PSI. Contaminated fuel can destroy injectors in minutes, leading to repairs costing thousands of dollars. Our P556745 fuel filter provides the first line of defense, meeting or exceeding the filtration performance of OEM filters at a fraction of the dealership price. Every filter is manufactured in ISO 9001 certified facilities and tested to ensure consistent quality. Frequently Asked Questions Q: How often should I replace the P556745 fuel filter?A: For heavy-duty diesel applications, replace every 15,000-25,000 miles or every 500 hours of operation, whichever comes first. For agricultural equipment, replace annually or per your equipment manufacturer's schedule. Q: What happens if I don't replace my fuel filter on time?A: A clogged fuel filter restricts fuel flow, causing power loss, poor acceleration, hard starting, and reduced fuel economy. In severe cases, bypassed contaminants can damage high-pressure fuel pumps and injectors — repairs that often exceed $5,000. Q: Is this filter compatible with biodiesel blends?A: Yes. Our filter media is compatible with biodiesel blends up to B20. However, biodiesel has stronger solvent properties and may release accumulated deposits in older fuel systems, requiring more frequent filter changes initially. Q: How do I prime the fuel system after filter replacement?A: Fill the new filter with clean diesel fuel before installation. After installing, cycle the key to the "ON" position (without starting) 3-4 times to activate the electric lift pump. For engines without a lift pump, use the manual primer pump (if equipped) or consult your service manual. Q: Does this filter require any special tools for installation?A: A standard oil filter wrench or strap wrench is sufficient for most applications. Always lubricate the gasket with clean diesel fuel before installation and hand-tighten, then turn an additional 3/4 turn. Related Products Complete your diesel fuel system maintenance: FS1003 Fuel Water Separator for Cummins FS1098 Fuel Water Separator w/ PCV PF7977 Fuel Filter for Ram 5.9L Cummins

Read more less

Fuel Filter Pump for Cummins Onan RV Generators — 149-2341-01 Genuine-Spec Fuel Filter Pump Restore reliable fuel priming to your Cummins Onan generator or RV with this direct-replacement fuel filter pump. Essential for proper fuel system bleeding after filter service — a failing primer pump can leave you stranded with a fuel-starved engine. Precision-machined piston and check valves ensure consistent priming performance in all conditions. Key Features Precision-Machined Piston — Reliable check valve operation for consistent priming 10 Micron Filtration — Multi-layer cellulose/synthetic media captures particles as small as 10 microns Water Separation — Hydrophobic barrier strips emulsified water from diesel fuel, preventing injector corrosion OEM-Quality Construction — Manufactured to ISO/TS 16949 quality standards with 100% end-of-line testing Direct Fit — Precision-engineered to match OEM dimensions and mounting points — no modifications required Corrosion Resistant — Coated/plated components withstand diesel fuel, road salt, and moisture exposure Validated for Cummins Onan — Confirmed fitment across all listed applications Compatibility Make Engine Year Range Model Onan RV QG 5500/7000 2000-2025 HGJAB/HGJAC/HGJAD Onan Marquis Gold 2000-2020 BGM/NHM Always verify fitment using the cross-reference part numbers below or contact our support team. Cross-Reference Part Numbers Brand Part Number Cummins Onan 149-2341-01 Cummins 149-2341 Specifications Specification Value Part Number Fuel Brand iFJF Filtration Rating 10 Micron (Nominal) Media Type Cellulose/Synthetic Blend Product Type Fuel Filter Application RV Generator QG 5500/7000, Marquis Gold BGM/NHM Vehicle Make Cummins Onan Material Steel/Plastic Composite Country of Origin China (ISO Certified) Warranty 1 Year / Unlimited Mileage Installation Guide Relieve fuel system pressure — Remove fuel cap and depressurize per vehicle service manual Remove old filter — Unscrew filter housing cap, remove old element, drain housing into approved container Clean housing — Wipe housing interior with clean lint-free cloth, inspect for debris or water Install new O-rings — Lubricate new O-rings with clean diesel fuel, seat properly in grooves Insert new element — Place new filter element into housing, ensuring proper orientation Reassemble and torque — Reinstall cap to manufacturer torque spec (typically 25-35 Nm) Prime fuel system — Cycle key to ON (not START) 3-5 times for 30 seconds each, or use manual primer pump Check for leaks — Start engine, inspect housing and connections for fuel seepage Maintenance Schedule For optimal fuel system protection, replace your fuel filter every 15,000-25,000 miles (or every other oil change) under normal operating conditions. For severe service (heavy towing, dusty environments, high-idle operation), reduce interval to 10,000-15,000 miles. Always replace both primary and secondary filters as a set on two-stage filtration systems. Frequently Asked Questions Q: What are the benefits of upgrading to this filter head? Upgrading to this billet aluminum filter head eliminates the common failure points of OEM plastic housings: cracking, thread stripping, and air leaks. It also provides easier bleeding with the integrated bleeder screw. Q: Will this work with my existing RV Generator QG 5500/7000 filter element? Yes, this filter head is designed to accept standard RV Generator QG 5500/7000 filter elements. It maintains OEM thread specifications and seal dimensions. Q: Does this include installation hardware? Yes, this assembly includes the filter head, bleeder screw, heater element connector, and all necessary O-rings and mounting hardware for a complete installation. Q: Is professional installation recommended? While experienced DIY mechanics can install this component, we recommend professional installation due to the critical nature of the fuel system. Improper installation can lead to fuel leaks and engine damage. Q: How do I prime the fuel system after installation? Use the integrated hand-primer pump (if equipped) to fill the filter housing and bleed air from the system. Alternatively, cycle the ignition key to the ON position (not START) for 30 seconds, 3-5 times, to allow the electric lift pump to prime the system. Related Products 🔗 Cummins Onan Parts & Filters 🔗 All Diesel Fuel Filters | All iFJF Products Related Blog Posts 📖 Complete Guide: When to Replace Your Diesel Fuel Filter 📖 5 Warning Signs Your Fuel Filter Is Clogged 📖 Cummins Diesel Maintenance Schedule & Tips 📖 RV Generator Maintenance: Essential Filter Service Guide 📖 Related Guide 122-0836 Oil Filter Buying Guide & Cross-Reference — Complete compatibility list for Onan QG 5500/7000 generators. Includes DIY oil change procedure and full maintenance filter table.

Read more less