Search results for "exhaust gasket"

5" DPF Delete Exhaust System for 2013-2018 Ram 6.7L Cummins Turbo Diesel Unlock the full potential of your 2013-2018 Ram 2500 or 3500 with the 6.7L Cummins Turbo Diesel using this mandrel-bent DPF (Diesel Particulate Filter) delete exhaust system. The factory DPF is one of the most restrictive components in the OEM exhaust system, creating significant backpressure that robs horsepower, torque, and fuel economy. Our DPF delete pipe replaces the restrictive factory filter with a free-flowing 5" mandrel-bent exhaust for maximum performance. Why Delete Your 6.7L Cummins DPF? The Diesel Particulate Filter on the 6.7L Cummins captures soot particles and periodically burns them off through a regeneration (regen) cycle. While designed to reduce particulate emissions, the DPF system creates several well-documented problems: Excessive Backpressure: The DPF creates significant exhaust restriction, reducing turbo efficiency, increasing EGTs (Exhaust Gas Temperatures), and limiting horsepower potential. Fuel Dilution: During active regeneration, raw diesel fuel is injected into the cylinders during the exhaust stroke, washing down cylinder walls and contaminating engine oil. Reduced Fuel Economy: Regeneration cycles consume extra fuel, and DPF backpressure reduces combustion efficiency. Owners commonly report 2-4 MPG improvement after DPF delete. Regen Hassles: Short trips, idle time, and cold weather can prevent complete regeneration, leading to "Drive to Clean" messages, limp mode, and eventual DPF clogging requiring $2,000+ replacement. Turbo Lag: Reduced exhaust flow through the DPF increases turbo lag and throttles throttle response – especially noticeable when towing heavy loads. What's Included Component Material Function 5" Turbo-Back DPF Delete Pipe T409 Mandrel-Bent Stainless Steel Replaces factory DPF from turbo outlet to tailpipe section All Required Flanges CNC Laser-Cut Steel Factory-fit flanges for bolt-on installation Mounting Hardware & Clamps Grade 10.9 Steel / Stainless Clamps Complete installation hardware kit Factory Hanger Points T409 Stainless Uses OEM exhaust hanger locations – no fabrication needed Vehicle Compatibility Year Make Model Engine Cab Config 2013-2018 Ram 2500 6.7L Cummins I6 All 2013-2018 Ram 3500 6.7L Cummins I6 All Premium Build Quality T409 Stainless Steel Construction: Mandrel-bent T409 stainless steel maintains consistent 5" internal diameter throughout – no crush bends that restrict flow. Superior corrosion resistance compared to aluminized steel alternatives. Mandrel Bending Technology: Unlike crush-bent exhaust systems that reduce internal diameter at every bend, our mandrel-bent pipes maintain full 5" diameter for maximum exhaust flow and minimum backpressure. OEM Hanger Points: Pre-welded hanger brackets match factory exhaust hanger locations for a true bolt-on installation with zero fabrication. Factory-Fit Flanges: CNC laser-cut flanges ensure a perfect seal at all connection points. No exhaust leaks, no gasket issues. Performance Benefits +15-25 HP / +30-50 lb-ft Torque: Eliminating DPF backpressure allows the turbo to spool faster and the engine to breathe freely. 2-4 MPG Fuel Economy Improvement: No more regeneration fuel consumption. Cleaner, more efficient combustion without DPF restriction. Lower EGTs: Free-flowing exhaust reduces exhaust gas temperatures by 100-200°F under load – critical for towing safety and turbo longevity. Improved Turbo Response: Reduced backpressure means faster turbo spool and sharper throttle response. Better Exhaust Note: Straight-pipe sound with a deep, aggressive diesel tone. Installation Overview This DPF delete exhaust system is engineered for straightforward bolt-on installation. All factory hanger points are pre-welded, and the kit includes all necessary clamps and hardware. Estimated installation time: 2-4 hours with basic hand tools, a saw or exhaust cutter (for removing the factory DPF), and a floor jack or lift. No welding required. Frequently Asked Questions Q: Will this fit my 2016 Ram 3500 Crew Cab Long Bed?A: Yes. This kit is designed to fit all 2013-2018 Ram 2500 and 3500 models with the 6.7L Cummins. It fits all cab configurations including Regular Cab, Crew Cab, and Mega Cab with both short and long bed options. Q: Do I need a tuner after DPF delete?A: Yes. The factory ECM will detect DPF removal and may trigger warning lights or limp mode. A compatible tuner is required to disable DPF-related functions and optimize the engine calibration for the new exhaust configuration. Q: Is this a complete bolt-on kit?A: Yes. The kit includes all pipes, flanges, clamps, hangers, and hardware needed for installation. No additional parts or fabrication required. Q: What's the difference between T409 and T304 stainless steel?A: T409 stainless offers excellent corrosion resistance at a better value point. For the majority of climates and applications, T409 provides decades of reliable service. T304 (used in marine environments) costs 50-70% more with minimal additional benefit for most truck owners. Q: How does DPF delete affect towing performance?A: Towing performance improves significantly. Lower EGTs mean safer heavy-load operation, and reduced backpressure allows the engine to maintain power more efficiently on long grades. Many owners report 100-200°F EGT reduction when towing after DPF delete. Q: Will this exhaust pass emissions testing?A: This product is designed for off-road and competition use only. It is not intended for use on vehicles subject to emissions regulations. Please check your local and state laws before purchase. Q: What tools do I need for installation?A: Basic hand tools (sockets, wrenches), a floor jack or lift, an exhaust cutter or reciprocating saw, and penetrating oil for factory bolts. Installation time is approximately 2-4 hours. Related Products for Your 6.7L Cummins 6.7L EGR Delete KitComplete EGR valve & cooler delete 6.7L Intake Elbow 3.5"High-flow intake manifold upgrade 6.7L Coolant Bypass KitFix the leaking coolant bypass adapter 6.7L EGR Valve Delete (2007-2018)Valve-only delete for earlier models Related Blog Posts 6.7L Cummins DPF Delete: Performance Gains, Fuel Savings & What to Expect Diesel Emissions Delete: What Owners Need to Know 6.7L Cummins Towing Upgrades: EGTs, Turbo, and Exhaust Mods

Read more less

Product Overview The iFJF 2004.5-2010 6.6L Chevy GMC Duramax Passenger Side Up-Pipe & 3'' Downpipe Exhaust is a premium-quality aftermarket replacement part engineered for 2004 Chevrolet / GMC Duramax_6.6L LBZ vehicles. Designed to meet or exceed OEM specifications, this Up-Pipe delivers exceptional performance, durability, and reliability for Sierra_3500HD / Silverado_2500HD owners who demand the best for their vehicles. Key Features Precision Engineering: Manufactured to exact OEM specifications using advanced CNC machining and rigorous quality control processes for perfect fitment every time. Premium Materials: Constructed from high-grade materials selected for maximum durability, corrosion resistance, and long service life under demanding conditions. Direct Fit Installation: Designed as a direct bolt-on replacement with no modifications required — simply remove the old part and install this one using basic hand tools. Quality Certified: Backed by IATF 16949 certified manufacturing standards, ensuring consistent quality and reliability across every unit produced. Comprehensive Warranty: Covered by iFJF's standard warranty against manufacturing defects, with dedicated customer support available to answer your questions. ⚠️ Off-Road Use Only Disclaimer IMPORTANT: This product is intended for OFF-ROAD / COMPETITION USE ONLY. It is NOT legal for sale or use on pollution-controlled motor vehicles operated on public roads in the United States under EPA (Environmental Protection Agency) and CARB (California Air Resources Board) regulations. By purchasing this product, you acknowledge that you understand this restriction and agree to use it solely for off-road, closed-course racing, or export applications. Please verify your local, state, and federal laws before purchasing. Compatibility Specification Details Vehicle Make Chevrolet / GMC Vehicle Models Sierra_3500HD / Silverado_2500HD Year Range 2004 Engine Duramax_6.6L LBZ Part Number iFJF 2004.5-2010 6.6L Chevy GMC Duramax Passenger Side Up-Pipe & 3'' Downpipe Exhaust Replaces OEM OEM specifications Why Choose iFJF Direct? At iFJF Direct, we specialize in providing diesel enthusiasts and professional mechanics with premium aftermarket parts that deliver genuine value. Every product we sell is carefully selected for quality, tested for performance, and backed by our commitment to customer satisfaction. Whether you're maintaining a daily driver, building a competition truck, or servicing a fleet, iFJF has the parts you need with the quality you can trust. Frequently Asked Questions Q: Will this fit my 2004? A: This Up-Pipe is specifically designed for 2004 Chevrolet / GMC Sierra_3500HD / Silverado_2500HD with the Duramax_6.6L LBZ. Always verify your vehicle's exact year, make, model, and engine specification match the compatibility information above before ordering. Q: Is professional installation required? A: Installation difficulty varies by vehicle and skill level. For most applications, this is a direct bolt-on replacement that can be completed with basic hand tools. We always recommend consulting a certified mechanic if you are unsure about any installation procedure. Q: What's included with my purchase? A: Your purchase includes the Up-Pipe as shown. Please review the product images and description carefully. If additional hardware or gaskets are required for installation, they are included where noted. Q: What is your shipping and delivery policy? A: iFJF Direct offers fast worldwide shipping. Orders are typically processed within 1-2 business days. Shipping times vary by destination. Free shipping is available on qualifying orders. Contact our support team for specific delivery estimates to your location. Q: What warranty coverage do you provide? A: All iFJF products are warranted against manufacturing defects. Our warranty covers replacement or refund of defective products. Contact our support team with your order number to initiate a warranty claim. We pride ourselves on standing behind every product we sell. Q: Will this kit cause a check engine light? A: Yes, removing or modifying emission control systems will trigger diagnostic trouble codes (DTCs) and illuminate the check engine light. ECU tuning is required to disable related DTCs and prevent the vehicle from entering limp mode. This product includes hardware only — tuning services are not included. Q: Is this legal for street use? A: No. This product is sold for OFF-ROAD / COMPETITION USE ONLY. It is NOT compliant with EPA or CARB regulations and is not legal for use on public roads in the United States. Please verify your local, state, and federal laws before purchasing. Order With Confidence When you order from iFJF Direct, you're getting more than just a Up-Pipe — you're getting our commitment to quality, reliability, and customer satisfaction. Every product is backed by our warranty and supported by our knowledgeable customer service team. Order yours today and experience the iFJF difference! 📚 Related Guides & Articles Get the most out of your purchase with these helpful resources: L5P Duramax: Downpipe Install + EGR Block-Off | Step By Step How to Install Duramax LB7 Injectors

Read more less

Complete EGR Delete Solution for 2017-2021 Chevrolet/GMC 6.6L Duramax L5P Turbo Diesel Upgrade your 2017-2021 Chevrolet Silverado or GMC Sierra 2500HD/3500HD with the 6.6L Duramax L5P Turbo Diesel using this professional-grade EGR delete kit. The L5P engine represents GM's most advanced Duramax platform, but its factory EGR system remains a critical reliability weak point. Our CNC-machined billet aluminum delete kit eliminates the EGR valve and EGR cooler to restore engine efficiency, prevent carbon buildup, and protect against catastrophic coolant-related failures. Why Delete Your L5P Duramax EGR System? The L5P Duramax features an advanced EGR system designed to meet stringent EPA Tier 3 emissions standards. However, this system creates several well-documented issues for L5P owners: Intake Carbon Fouling: The L5P's high-pressure EGR system routes significant exhaust soot into the intake tract. Over time, carbon deposits accumulate on intake valves, swirl flaps, and the intake manifold – progressively reducing airflow and power. EGR Cooler Failure: The L5P EGR cooler operates under extreme thermal stress. Internal cooler failure allows engine coolant to enter the intake system, potentially causing hydro-lock, head gasket failure, or catastrophic engine damage. Reduced Power & Response: Hot, oxygen-depleted exhaust gas displaces clean intake air, reducing combustion efficiency and turbocharger performance. Oil Contamination: Soot particles from EGR bypass piston rings and enter the crankcase, accelerating oil degradation and increasing engine wear. Complex & Costly Repairs: L5P EGR system components are buried deep in the engine valley, requiring significant labor for service. Dealership EGR cooler replacement typically costs $3,000-$4,500. What's Included Component Material Function EGR Cooler Block-Off Plates CNC Billet 6061-T6 Aluminum Seals EGR cooler ports at both intake and exhaust sides EGR Valve Delete Plate CNC Billet 6061-T6 Aluminum Replaces EGR valve with solid billet delete plate Coolant Reroute Fittings Billet Aluminum / Stainless Maintains proper coolant flow path after cooler removal Mounting Hardware Grade 10.9 Steel Complete gaskets, bolts, O-rings, and installation hardware Vehicle Compatibility Year Make Model Engine 2017-2021 Chevrolet / GMC Silverado 2500HD / Sierra 2500HD 6.6L Duramax L5P V8 Turbo Diesel 2017-2021 Chevrolet / GMC Silverado 3500HD / Sierra 3500HD 6.6L Duramax L5P V8 Turbo Diesel Premium Build Quality CNC-Machined 6061-T6 Billet Aluminum: Precision machined to exact L5P port dimensions. Maintains perfect flatness under extreme heat cycling – no warping, no leaks. Anodized Corrosion Protection: Hard anodized finish resists oxidation, road salt, and chemical exposure in harsh under-hood environments. OEM-Spec MLS Gaskets: Multi-layer steel gaskets rated for L5P boost pressures exceeding 35 PSI. Grade 10.9 Hardware: High-strength fasteners designed to withstand the L5P's thermal expansion characteristics and diesel vibration harmonics. Performance Benefits Restored Horsepower & Torque: Eliminates intake air displacement by hot exhaust gas – cleaner, denser intake charge for improved combustion. Cooler Intake Air Temperatures: No more 400°F+ EGR gas heating the intake charge – cooler air = more power. Improved Fuel Economy: More efficient combustion without EGR dilution. Owners report 1-2 MPG improvement. Eliminated Coolant Loss Risk: No more EGR cooler failure threatening your L5P's head gaskets and rotating assembly. Cleaner Engine Oil: Zero soot contamination from EGR – extended oil life and better bearing protection. Reduced Maintenance: Eliminates the most complex and failure-prone system on the L5P platform. Installation Overview This kit is designed for experienced mechanics and professional diesel shops. The L5P's EGR system requires significant disassembly including intake manifold removal. Estimated installation time: 5-8 hours. Professional installation recommended. Requires compatible tuning solution to disable EGR-related DTCs. Frequently Asked Questions Q: Will this fit my 2020 GMC Sierra 3500HD Denali?A: Yes. This kit fits all 2017-2021 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD models equipped with the 6.6L Duramax L5P engine. Trim level (WT, LT, LTZ, High Country, Denali) does not affect fitment. Q: Do I need a tuner for the L5P EGR delete?A: Yes. The L5P ECM is highly sophisticated and will detect EGR system changes immediately. A compatible tuning solution is absolutely required to properly disable EGR functions and prevent limp mode / warning lights. Q: Is this kit reversible?A: Yes. The kit is fully bolt-on with no cutting, welding, or permanent modifications. The factory EGR system can be reinstalled if desired, though tuning will need to be restored as well. Q: How does this compare to just unplugging the EGR valve?A: Simply unplugging the EGR valve does not address the failed cooler risk, carbon buildup in the intake, or coolant routing issues. Our complete delete kit physically removes all EGR components for a permanent reliability solution. Q: What are signs my L5P EGR cooler is failing?A: Watch for unexplained coolant loss (no visible leaks), white smoke from exhaust, rough cold starts, and rising engine temperatures. Coolant in the intake can cause catastrophic engine damage – address immediately. Q: How does EGR delete affect towing with my L5P?A: Towing performance typically improves. Cooler intake temperatures, cleaner combustion, and no EGR dilution allow the engine to maintain power more efficiently under sustained heavy load. Lower EGTs are a significant benefit for mountain towing. Q: Is this product intended for on-road use?A: This product is designed for off-road and competition use only. Related Products for Your L5P Duramax L5P 3.5" DownpipeHigh-flow turbo downpipe upgrade L5P Fuel FilterTP1015 replacement filter L5P Downpipe + EGR Delete ComboComplete performance package Related Blog Posts L5P Duramax EGR Delete: Complete Guide to Reliability & Performance L5P Duramax Common Problems & Reliability Upgrades Duramax Emissions Delete: L5P vs LML vs LMM Comparison ⚠️ Off-Road Use Only: This product is intended for off-road/competition use only. Not legal for highway use on emissions-controlled vehicles. Always check local and federal regulations before purchasing. 🔗 L5P Duramax Resources & Maintenance 📖 L5P Maintenance Guides: L5P Fuel Filter Housing Cap Replacement — Complete DIY Guide Duramax Fuel Filter Housing: Compatibility Guide (2001–2024) Duramax 6.6L Oil Change: Complete DIY Guide (Every Generation) 🛒 Related L5P Products: 134001 Billet Aluminum Fuel Filter Housing Cap — lifetime upgrade for L5P TP1015 Filter + 134001 Cap Kit — complete fuel filter service kit TP1015 Replacement Filter Element — 5-micron absolute, 98% water separation A3231C Air Filter for L5P Duramax — high-flow replacement 🔍 Shop All Duramax 6.6L Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview Replace your failed NOx sensor with this premium aftermarket 5WK96740B Nitrogen Oxide (NOx) Sensor, precision-engineered for Kenworth T680/T880, International ProStar/LT (2010-2019) (2010-2019) equipped with the Cummins ISX12/ISX15, PACCAR MX-13 engine. This sensor delivers OE-comparable accuracy and response time at a fraction of dealership prices. Key Features Direct Plug-and-Play Replacement — No programming or calibration required. Uses the same 5-pin connector and thread pitch as the OEM sensor. Precision Sensing Element — Multi-layer ceramic sensing element provides accurate NOx concentration readings (±10 ppm accuracy) across the full operating temperature range. OEM-Grade Construction — High-temperature stainless steel housing with sealed electronics cavity protects against moisture, vibration, and thermal shock. Pre-Calibrated & Tested — Each sensor undergoes 100% functional testing before shipping, ensuring out-of-box readiness. 1-Year Warranty — Backed by our comprehensive warranty against manufacturing defects. Compatibility & Fitment This 5WK96740B NOx sensor is compatible with the following applications: Vehicle/Engine Year Range Engine Kenworth T680/T880, International ProStar/LT (2010-2019) 2010-2019 Cummins ISX12/ISX15, PACCAR MX-13 Technical Specifications Specification Value Part Number 5WK96740B OE Reference Numbers 3687930, 4326870 Sensor Type Nitrogen Oxide (NOx) — Downstream SCR Outlet Connector Type 5-pin Thread Size M20 x 1.5 (Standard NOx Sensor Thread) Operating Voltage 12V / 24V DC Measurement Range 0-3000 ppm NOx Brand iFJF Why Choose iFJF NOx Sensors? Save 50-70% vs. Dealer Pricing — Get OE-quality performance without the OE markup. Most dealer NOx sensors cost $400-$800+; ours deliver the same function at a fraction of the cost. Fleet-Tested Reliability — Our sensors are trusted by independent repair shops and fleet operators across North America for daily-use diesel vehicles. Fast Shipping from US Stock — Orders ship within 1 business day. No 2-4 week backorder delays common with dealer parts. No Core Charge — Unlike dealer replacement programs, there's no core deposit or return requirement. Installation Tips Safety First: Allow exhaust system to cool completely before beginning (NOx sensors reach 600°C+ during operation). Locate the Sensor: Find the sensor on the exhaust pipe near the SCR catalyst. Refer to vehicle service manual for exact location. Unplug & Remove: Disconnect the electrical connector, then use a 22mm or 7/8" oxygen sensor socket to unscrew the old sensor. Install New Sensor: Thread the new sensor by hand first to avoid cross-threading. Torque to 35-45 Nm (26-33 ft-lbs). Anti-seize is pre-applied on threads. Connect & Clear Codes: Plug in the electrical connector until it clicks. Use OBD-II scanner to clear any stored NOx-related fault codes. Test Drive: Complete 1-2 drive cycles for the ECU to complete sensor readiness monitors. Frequently Asked Questions Q: What is a NOx sensor and why does it fail?A: A NOx (Nitrogen Oxide) sensor monitors the nitrogen oxide levels in your diesel engine's exhaust system, feeding data to the ECU for SCR/DPF regeneration. Common failure causes include soot contamination, thermal cycling fatigue, and sensor element degradation over 100,000+ miles. Symptoms of failure include Check Engine Light (CEL), poor fuel economy, failed emissions test, and derate mode. Q: Is this 5WK96740B NOx sensor a direct plug-and-play replacement?A: Yes. This NOx sensor is designed as a direct OE replacement for 5WK96740B. It uses the same 5-pin connector and mounting thread as the OEM unit. No programming or calibration required — simply unplug the old sensor, install the new one, and clear any stored diagnostic codes. Always verify fitment with your vehicle's VIN before purchase. Q: Will this fit my Kenworth T680/T880, International ProSta?A: This NOx sensor fits Kenworth T680/T880, International ProStar/LT (2010-2019) with the Cummins ISX12/ISX15, PACCAR MX-13 engine. It replaces OE part numbers: 3687930, 4326870. Please cross-reference your existing sensor part number before ordering. If your OEM part number is listed above, this is a guaranteed direct fit. Q: What's the difference between upstream and downstream NOx sensors?A: Upstream (inlet) NOx sensors measure pre-SCR emissions to help the ECU calculate DEF dosing. Downstream (outlet) NOx sensors measure post-SCR emissions to verify the SCR catalyst is working correctly. This is the Downstream SCR Outlet sensor. Installing the wrong position sensor will trigger diagnostic codes. Check your vehicle's service manual for the correct position. Q: How do I know if my NOx sensor is bad?A: Common symptoms include: (1) Check Engine Light with P2200-P2214 or P229E-P22A2 codes, (2) Decreased fuel economy (ECU defaults to rich mixture), (3) Failed emissions inspection, (4) Engine derate / limp mode, (5) Excessive DEF consumption, (6) Rough idle or hesitation. Use an OBD-II scanner to read specific NOx-related codes. Q: Do I need to reset the ECU after installation?A: After installing the new 5WK96740B NOx sensor, use an OBD-II scanner to clear any stored fault codes. The ECU will automatically recognize the new sensor and begin monitoring within 1-2 drive cycles. If codes persist, double-check the electrical connector is fully seated and there are no exhaust leaks near the sensor bung. Q: How long do aftermarket NOx sensors last?A: Our NOx sensors are manufactured to strict quality standards with premium sensing elements. Expected service life is 80,000-120,000 miles under normal operating conditions. Factors affecting lifespan include fuel quality, engine maintenance, and operating environment. We offer a 1-year warranty against manufacturing defects. Q: What's included in the box?A: Each order includes one (1) 5WK96740B NOx Nitrogen Oxide Sensor with pre-installed O-ring gasket, anti-seize compound on threads, and protective cap. The sensor is individually tested and calibrated before shipping. Install tool not included. 🛒 Related NOx Sensors & Diesel Emission Parts 5WK96687A Sensor — Audi/VW TDI 5WK96691 Sensor — BMW Diesel 5WK96740B Sensor — Kenworth/International 5WK97360 Sensor — Ram 2500/3500 View All Emission Sensors → 📖 Related Diesel Maintenance Guides Cummins ISX Crankcase Breather Filter Guide Diesel Fuel Filter Replacement Guide CP4 to CP3 Pump Upgrade Guide 6.7 Powerstroke Fuel Filter How-To

Read more less

Product Overview The iFJF EGR Valve & Cooler Delete Kit is engineered for 2007-2009 6.7L Cummins diesel engines found in Dodge Ram 2500/3500/4500/5500. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2009 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0190 Material Billet Aluminum / Stainless Steel Compatible Engine 6.7L Cummins Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.7L Cummins EGR Valve Delete Kit is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.7L Cummins truck?A: Yes. This kit is designed for 2007-2009 Dodge Ram 2500/3500/4500/5500 with the 6.7L Cummins engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.7L Cummins platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our EGR Delete collection: 6.7L Cummins EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview The iFJF EGR Delete Kit is engineered for 2007-2009 6.7L Cummins diesel engines found in Dodge Ram 2500/3500/4500/5500. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2009 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0015 Material Billet Aluminum / Stainless Steel Compatible Engine 6.7L Cummins Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.7L Cummins EGR Delete Kit is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.7L Cummins truck?A: Yes. This kit is designed for 2007-2009 Dodge Ram 2500/3500/4500/5500 with the 6.7L Cummins engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.7L Cummins platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our EGR Delete collection: 6.7L Cummins EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades

Read more less

Complete EGR Delete Solution for 2014-2019 Ram 1500 3.0L EcoDiesel V6 Upgrade your 2014-2019 Ram 1500 with the 3.0L EcoDiesel V6 using this professional-grade EGR delete kit. The VM Motori 3.0L EcoDiesel is known for its excellent fuel economy, but the factory EGR system is widely recognized as its most significant reliability weakness. This CNC-machined billet aluminum delete kit eliminates the failure-prone EGR valve and EGR cooler to protect your EcoDiesel from carbon fouling, coolant contamination, and the expensive repairs that have plagued thousands of EcoDiesel owners. Why Delete Your EcoDiesel EGR System? Intake Carbon Fouling (#1 EcoDiesel Problem): The EcoDiesel's EGR system routes heavy soot into the intake, which combines with oil vapor from the CCV system to form thick carbon deposits. This progressively chokes the intake manifold, swirl valves, and intake ports – reducing airflow and power. Cleaning requires complete intake disassembly ($1,200-$2,000 at shops). EGR Cooler Failure: The EcoDiesel's EGR cooler is susceptible to internal cracking, allowing engine coolant to enter the intake tract. Coolant in the combustion chamber can cause hydrolock and catastrophic engine damage. This is a well-documented failure point on the 3.0L EcoDiesel. Tonneau of Oil Dilution: EGR soot contamination accelerates oil degradation, requiring more frequent oil changes and increasing engine bearing wear. Reduced Fuel Economy: Diluted intake charge from EGR reduces combustion efficiency, negating some of the fuel economy benefits that make the EcoDiesel attractive. Expensive Repairs: Dealership EGR cooler replacement on EcoDiesel typically costs $2,500-$4,000, and intake cleaning adds another $1,000-$2,000. What's Included Component Material Function EGR Cooler Block-Off Plates CNC Billet 6061-T6 Aluminum Seals EGR cooler ports at intake and exhaust manifolds EGR Valve Delete Plate CNC Billet 6061-T6 Aluminum Replaces EGR valve with solid billet block-off Coolant Reroute Fittings Billet Aluminum Maintains proper coolant flow path after cooler removal Mounting Hardware Grade 10.9 Steel Complete gaskets, bolts, and installation hardware kit Vehicle Compatibility Year Make Model Engine 2014-2019 Ram 1500 3.0L EcoDiesel V6 Turbo Diesel Premium Build Quality CNC-Machined 6061-T6 Billet Aluminum: Precision-engineered for exact port matching on the EcoDiesel's compact engine architecture. Maintains perfect flatness under thermal cycling. Anodized Finish: Corrosion-resistant surface treatment for long-term durability in harsh engine bay environments. OEM-Spec Gaskets: Multi-layer steel gaskets rated for EcoDiesel boost pressures. Grade 10.9 Fasteners: High-tensile hardware designed to resist vibration and thermal cycling. Performance Benefits Eliminates Carbon Fouling: No more soot entering the intake tract – intake stays clean for the life of the engine. Cooler Intake Temperatures: No more 400°F+ EGR gas heating the intake charge. Improved Fuel Economy: Cleaner, denser intake air for more efficient combustion. 1-3 MPG improvement commonly reported. Extended Oil Life: Zero soot contamination means cleaner oil and longer intervals between changes. Eliminated Coolant Loss Risk: No EGR cooler to fail and send coolant into your cylinders. Reduced Maintenance Costs: Eliminates the most expensive and failure-prone system on the EcoDiesel. Installation Overview This kit is designed for experienced DIY mechanics and professional shops. The EcoDiesel's compact engine bay requires significant disassembly. Estimated installation time: 5-8 hours. Requires compatible tuning solution to disable EGR-related DTCs and optimize engine parameters. Professional installation recommended for most owners. Frequently Asked Questions Q: Will this fit my 2016 Ram 1500 EcoDiesel Laramie?A: Yes. This kit fits all 2014-2019 Ram 1500 models equipped with the 3.0L EcoDiesel V6 engine. Trim level (Tradesman, SLT, Big Horn, Laramie, Longhorn, Limited) does not affect fitment. Q: Do I need a tune after EGR delete on EcoDiesel?A: Yes, absolutely. The EcoDiesel ECM will detect EGR system changes and may enter limp mode or trigger persistent check engine lights. A compatible tuning solution is required to properly disable EGR functions. Q: Will this fix my EcoDiesel's carbon buildup problem?A: This kit prevents future carbon buildup by eliminating the source (EGR soot). However, existing carbon deposits in the intake manifold must be cleaned separately. We strongly recommend performing an intake cleaning at the same time as the EGR delete installation. Q: Is this a permanent fix for EcoDiesel reliability?A: The EGR system is the #1 reliability concern on the 3.0L EcoDiesel. Deleting it addresses the root cause of carbon fouling and coolant contamination. Combined with proper maintenance, this is the single most impactful reliability upgrade for EcoDiesel owners. Q: How does EGR delete affect my EcoDiesel's fuel economy?A: Most owners report a 1-3 MPG improvement. Cleaner intake air, no EGR dilution, and more efficient combustion all contribute to better fuel economy – especially in highway driving. Q: What about the CCV system – should I delete that too?A: While this kit focuses on EGR, the CCV (Crankcase Ventilation) system also contributes to intake carbon fouling by introducing oil vapor. Many EcoDiesel owners choose to install a CCV reroute or catch can system alongside the EGR delete for maximum intake cleanliness. Q: Is this product street-legal?A: This product is designed for off-road and competition use only. Not intended for use on emissions-regulated highway vehicles. Related Products for Your Ram 1500 EcoDiesel 6.7L Cummins EGR Delete KitFor Ram 2500/3500 Cummins 6.7L EGR Valve DeleteValve-only variant for 6.7L Related Blog Posts Ram EcoDiesel EGR Delete: Ultimate Reliability Guide EcoDiesel Common Problems & Prevention Guide Diesel Emissions Delete: What Owners Need to Know

Read more less

Product Overview The iFJF EGR Delete Plug Kit is engineered for 2007-2018 6.7L Cummins diesel engines found in Dodge Ram 2500/3500/4500/5500. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2018 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0177 Material Billet Aluminum / Stainless Steel Compatible Engine 6.7L Cummins Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.7L Cummins Plug Kit is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.7L Cummins truck?A: Yes. This kit is designed for 2007-2018 Dodge Ram 2500/3500/4500/5500 with the 6.7L Cummins engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.7L Cummins platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our Diesel Performance Parts collection: 6.7L Cummins EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades ⚠️ Off-Road / Competition Use Only: This product is intended for off-road or competition vehicles only. Not legal for highway use on emissions-controlled vehicles in the US and many other jurisdictions. Check local and federal regulations before purchasing. Removal of emissions equipment may void your vehicle warranty. 🔗 Cummins Diesel Resources & Maintenance 📖 Related Guides: Ram 6.7L Cummins Fuel Filter Replacement: Complete DIY Guide (2013–2018) Diesel Fuel Filter Maintenance — When to Replace (Duramax, Powerstroke & Cummins) 🔍 Shop All Cummins Parts → | EGR Delete Parts → | Fuel Filters →

Read more less

Product Overview The iFJF EGR Delete Plug Kit is engineered for 2007-2018 6.7L Cummins diesel engines found in Dodge Ram 2500/3500/4500/5500. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2018 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0114 Material Billet Aluminum / Stainless Steel Compatible Engine 6.7L Cummins Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.7L Cummins Plug Kit is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.7L Cummins truck?A: Yes. This kit is designed for 2007-2018 Dodge Ram 2500/3500/4500/5500 with the 6.7L Cummins engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.7L Cummins platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our EGR Delete collection: 6.7L Cummins EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades

Read more less

Product Overview Replace your failed NOx sensor with this premium aftermarket 5WK97403 Nitrogen Oxide (NOx) Sensor, precision-engineered for Detroit Diesel DD13, DD15, DD16 (2017-2023), Freightliner Cascadia (2017-2023) equipped with the Detroit Diesel DD13/DD15/DD16 GHG17 engine. This sensor delivers OE-comparable accuracy and response time at a fraction of dealership prices. Key Features Direct Plug-and-Play Replacement — No programming or calibration required. Uses the same 5-pin connector and thread pitch as the OEM sensor. Precision Sensing Element — Multi-layer ceramic sensing element provides accurate NOx concentration readings (±10 ppm accuracy) across the full operating temperature range. OEM-Grade Construction — High-temperature stainless steel housing with sealed electronics cavity protects against moisture, vibration, and thermal shock. Pre-Calibrated & Tested — Each sensor undergoes 100% functional testing before shipping, ensuring out-of-box readiness. 1-Year Warranty — Backed by our comprehensive warranty against manufacturing defects. Compatibility & Fitment This 5WK97403 NOx sensor is compatible with the following applications: Vehicle/Engine Year Range Engine Detroit Diesel DD13, DD15, DD16 (2017-2023), Freightliner Cascadia 2017-2023 Detroit Diesel DD13/DD15/DD16 GHG17 Technical Specifications Specification Value Part Number 5WK97403 OE Reference Numbers A0101538128, A2C98009700, EA0101538128 Sensor Type Nitrogen Oxide (NOx) — Outlet NOx Sensor (GHG17) Connector Type 5-pin Thread Size M20 x 1.5 (Standard NOx Sensor Thread) Operating Voltage 12V / 24V DC Measurement Range 0-3000 ppm NOx Brand iFJF Why Choose iFJF NOx Sensors? Save 50-70% vs. Dealer Pricing — Get OE-quality performance without the OE markup. Most dealer NOx sensors cost $400-$800+; ours deliver the same function at a fraction of the cost. Fleet-Tested Reliability — Our sensors are trusted by independent repair shops and fleet operators across North America for daily-use diesel vehicles. Fast Shipping from US Stock — Orders ship within 1 business day. No 2-4 week backorder delays common with dealer parts. No Core Charge — Unlike dealer replacement programs, there's no core deposit or return requirement. Installation Tips Safety First: Allow exhaust system to cool completely before beginning (NOx sensors reach 600°C+ during operation). Locate the Sensor: Find the sensor on the exhaust pipe near the SCR catalyst. Refer to vehicle service manual for exact location. Unplug & Remove: Disconnect the electrical connector, then use a 22mm or 7/8" oxygen sensor socket to unscrew the old sensor. Install New Sensor: Thread the new sensor by hand first to avoid cross-threading. Torque to 35-45 Nm (26-33 ft-lbs). Anti-seize is pre-applied on threads. Connect & Clear Codes: Plug in the electrical connector until it clicks. Use OBD-II scanner to clear any stored NOx-related fault codes. Test Drive: Complete 1-2 drive cycles for the ECU to complete sensor readiness monitors. Frequently Asked Questions Q: What is a NOx sensor and why does it fail?A: A NOx (Nitrogen Oxide) sensor monitors the nitrogen oxide levels in your diesel engine's exhaust system, feeding data to the ECU for SCR/DPF regeneration. Common failure causes include soot contamination, thermal cycling fatigue, and sensor element degradation over 100,000+ miles. Symptoms of failure include Check Engine Light (CEL), poor fuel economy, failed emissions test, and derate mode. Q: Is this 5WK97403 NOx sensor a direct plug-and-play replacement?A: Yes. This NOx sensor is designed as a direct OE replacement for 5WK97403. It uses the same 5-pin connector and mounting thread as the OEM unit. No programming or calibration required — simply unplug the old sensor, install the new one, and clear any stored diagnostic codes. Always verify fitment with your vehicle's VIN before purchase. Q: Will this fit my Detroit Diesel DD13, DD15, DD16 (2017-20?A: This NOx sensor fits Detroit Diesel DD13, DD15, DD16 (2017-2023), Freightliner Cascadia with the Detroit Diesel DD13/DD15/DD16 GHG17 engine. It replaces OE part numbers: A0101538128, A2C98009700, EA0101538128. Please cross-reference your existing sensor part number before ordering. If your OEM part number is listed above, this is a guaranteed direct fit. Q: What's the difference between upstream and downstream NOx sensors?A: Upstream (inlet) NOx sensors measure pre-SCR emissions to help the ECU calculate DEF dosing. Downstream (outlet) NOx sensors measure post-SCR emissions to verify the SCR catalyst is working correctly. This is the Outlet NOx Sensor (GHG17) sensor. Installing the wrong position sensor will trigger diagnostic codes. Check your vehicle's service manual for the correct position. Q: How do I know if my NOx sensor is bad?A: Common symptoms include: (1) Check Engine Light with P2200-P2214 or P229E-P22A2 codes, (2) Decreased fuel economy (ECU defaults to rich mixture), (3) Failed emissions inspection, (4) Engine derate / limp mode, (5) Excessive DEF consumption, (6) Rough idle or hesitation. Use an OBD-II scanner to read specific NOx-related codes. Q: Do I need to reset the ECU after installation?A: After installing the new 5WK97403 NOx sensor, use an OBD-II scanner to clear any stored fault codes. The ECU will automatically recognize the new sensor and begin monitoring within 1-2 drive cycles. If codes persist, double-check the electrical connector is fully seated and there are no exhaust leaks near the sensor bung. Q: How long do aftermarket NOx sensors last?A: Our NOx sensors are manufactured to strict quality standards with premium sensing elements. Expected service life is 80,000-120,000 miles under normal operating conditions. Factors affecting lifespan include fuel quality, engine maintenance, and operating environment. We offer a 1-year warranty against manufacturing defects. Q: What's included in the box?A: Each order includes one (1) 5WK97403 NOx Nitrogen Oxide Sensor with pre-installed O-ring gasket, anti-seize compound on threads, and protective cap. The sensor is individually tested and calibrated before shipping. Install tool not included. 🛒 Related NOx Sensors & Diesel Emission Parts 5WK96687A Sensor — Audi/VW TDI 5WK96691 Sensor — BMW Diesel 5WK96740B Sensor — Kenworth/International 5WK97360 Sensor — Ram 2500/3500 View All Emission Sensors → 📖 Related Diesel Maintenance Guides Cummins ISX Crankcase Breather Filter Guide Diesel Fuel Filter Replacement Guide CP4 to CP3 Pump Upgrade Guide 6.7 Powerstroke Fuel Filter How-To

Read more less

Complete EGR Delete Solution for 2013-2018 Dodge Ram 6.7L Cummins Turbo Diesel Upgrade your 2013-2018 Dodge Ram 2500 or 3500 with the 6.7L Cummins Turbo Diesel using this professional-grade EGR delete kit. Designed to eliminate the restrictive and failure-prone factory EGR (Exhaust Gas Recirculation) system, this kit restores engine efficiency, reduces carbon buildup, and unlocks the full performance potential of your Cummins powerplant. Why Delete Your 6.7L Cummins EGR System? The factory EGR system on the 6.7L Cummins recirculates hot exhaust gases back into the intake manifold. While intended to reduce NOx emissions, this system causes: Carbon Buildup: Soot and carbon deposits accumulate in the intake manifold, throttle valve, and EGR cooler, restricting airflow and reducing power over time. Coolant Contamination: The EGR cooler is prone to internal failure, allowing coolant to mix with exhaust gases and enter cylinders – a leading cause of head gasket failure on 6.7L Cummins engines. Reduced Fuel Economy: Recirculated exhaust gas displaces clean intake air, reducing combustion efficiency and increasing fuel consumption by 1-3 MPG. Throttle Valve Restriction: The factory throttle valve creates unnecessary intake restriction, limiting turbo spool and throttle response. Increased Maintenance Costs: EGR-related repairs on 6.7L Cummins engines are well-documented, with cooler replacements averaging $1,500-$2,500 at dealerships. What's Included in This Kit Component Material Function EGR Cooler Block-Off Plates CNC Billet 6061-T6 Aluminum Seals EGR cooler ports at intake and exhaust manifold Throttle Valve Delete CNC Billet 6061-T6 Aluminum Replaces restrictive factory throttle valve with straight-flow design Coolant Bypass Adapter CNC Billet 6061-T6 Aluminum Maintains proper coolant routing after EGR cooler removal Mounting Hardware Grade 10.9 Steel All gaskets, bolts, and O-rings for complete installation Vehicle Compatibility Year Make Model Engine 2013-2018 Dodge / Ram 2500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 3500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 4500 6.7L Cummins Turbo Diesel I6 2013-2018 Dodge / Ram 5500 6.7L Cummins Turbo Diesel I6 Premium Build Quality CNC-Machined 6061-T6 Billet Aluminum: Precision-engineered for exact fitment. Unlike stamped steel competitors, our billet plates won't warp under extreme heat cycling. Corrosion-Resistant Finish: Anodized surface treatment protects against oxidation and road salt corrosion in harsh environments. OEM-Spec Gaskets: Multi-layer steel (MLS) gaskets provide a leak-free seal rated for turbo diesel boost pressures exceeding 40 PSI. Grade 10.9 Hardware: High-tensile bolts and studs designed to withstand the thermal expansion and vibration of the 6.7L Cummins platform. Installation Overview This EGR delete kit is designed for experienced DIY mechanics and professional shops. Estimated installation time: 3-5 hours with basic hand tools. No welding or permanent modifications required – the kit is fully bolt-on and reversible. We recommend referencing a Cummins 6.7L service manual and following all safety procedures when working on your vehicle's emissions system. Performance Benefits Increased Horsepower & Torque: Eliminates intake restriction, allowing the turbocharger to spool faster and the engine to breathe cleaner, denser air. Improved Fuel Economy: Owners report 1-3 MPG improvement after EGR delete on 6.7L Cummins applications. Lower EGTs: Reduced exhaust gas temperatures by eliminating hot EGR recirculation – critical for towing and heavy-load operation. Cleaner Engine Oil: No more soot contamination from EGR, extending oil life and protecting critical engine bearings. Eliminated Coolant Loss Risk: Removes the EGR cooler – a known failure point that can lead to catastrophic head gasket damage. Frequently Asked Questions Q: Will this kit fit my 2018 Ram 3500 with the 6.7L Cummins?A: Yes. This kit is designed for all 2013-2018 Ram 2500, 3500, 4500, and 5500 trucks equipped with the 6.7L Cummins Turbo Diesel engine. It fits both the 68RFE automatic and G56 manual transmission variants. Q: Do I need a tuner after installing this EGR delete kit?A: Yes. The factory ECM will detect EGR system changes and may trigger a check engine light. A compatible tuner or ECM calibration is recommended to disable EGR-related diagnostic trouble codes (DTCs) and optimize engine parameters for the delete configuration. Q: Is this a complete kit with everything I need?A: Yes. This kit includes all EGR cooler block-off plates, throttle valve delete, coolant bypass adapter (where applicable), gaskets, O-rings, and Grade 10.9 mounting hardware. No additional parts required. Q: How does this compare to cheaper stamped steel kits?A: Our CNC-machined 6061-T6 billet aluminum plates maintain perfect flatness under extreme heat cycling – a critical advantage over stamped steel plates that can warp and leak over time. The premium anodized finish also provides superior corrosion resistance. Q: What are the signs my 6.7L Cummins EGR cooler is failing?A: Common symptoms include unexplained coolant loss, white smoke from the exhaust (coolant burning in cylinders), rough idle, and rising engine temperatures. If you notice these signs, replacing the EGR system should be a priority. Q: Can I install this kit myself?A: This kit is designed for DIY installation by mechanically inclined owners. Basic hand tools, a torque wrench, and mechanical experience are required. Estimated installation time is 3-5 hours. Professional installation is recommended if you're not comfortable working on diesel engine intake and exhaust systems. Q: Is this kit reversible?A: Yes. The kit is a bolt-on design with no cutting, welding, or permanent modifications. The factory EGR system can be reinstalled if desired. Q: What torque specifications should I use?A: All fasteners should be torqued to OEM specifications. Refer to your vehicle's service manual for exact values. Generally, EGR flange bolts require 18-22 ft-lbs on the 6.7L Cummins platform. Related Products for Your 6.7L Cummins 6.7L EGR Valve Delete Kit (2007-2018)Valve-only variant for earlier models 6.7L EGR Plate Cooler & Throttle Valve DeleteComplete EGR & throttle delete 6.7L DPF Delete Exhaust (2013+)4" Cab & Chassis exhaust 6.7L High-Flow Intake Elbow3.5" intake manifold upgrade Related Blog Posts 6.7L Cummins Common Problems & Solutions – EGR, DPF, and Reliability Guide Diesel Emissions Delete: What Owners Need to Know How to Improve 6.7L Cummins Fuel Economy – 10 Proven Mods

Read more less

Product Overview The iFJF EGR Valve & Cooler Delete Kit is engineered for 2007-2010 6.6L Duramax LMM diesel engines found in Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD. This precision-machined kit is designed to replace restrictive factory components, improving exhaust flow, reducing exhaust gas temperatures (EGTs), and enhancing overall engine efficiency. Manufactured from high-grade materials with exact fitment tolerances, this kit delivers reliable performance for off-road and competition applications. Key Features Precision CNC-Machined: Manufactured to exact OEM specifications for seamless bolt-on installation Heavy-Duty Construction: Crafted from premium materials for maximum durability under extreme conditions Improved Airflow Dynamics: Optimized internal geometry reduces turbulence and enhances flow efficiency Corrosion-Resistant Finish: Advanced surface treatment prevents rust and oxidation in harsh environments Complete Installation Kit: Includes all necessary gaskets, bolts, and hardware for straightforward installation EGT Reduction: Lowers exhaust gas temperatures for improved engine longevity Vehicle Compatibility Year Make Model Engine 2007 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax 2010 Chevrolet Silverado 2500HD/3500HD 6.6L Duramax Technical Specifications Part Number ER-0086 Material Billet Aluminum / Stainless Steel Compatible Engine 6.6L Duramax LMM Application Off-Road / Competition Use Only Installation Bolt-On (Professional Recommended) Why Choose iFJF? With years of experience in the diesel performance aftermarket, iFJF delivers components that meet or exceed OEM specifications. Every product undergoes rigorous quality control inspection before shipping. Our 6.6L Duramax LMM EGR Valve Delete Kit is trusted by diesel enthusiasts and professional mechanics across North America for its reliability and performance gains. Installation Notes Professional installation is recommended. Basic hand tools required. Estimated installation time: 2-4 hours depending on vehicle configuration. Always disconnect the battery before beginning installation. ⚠️ Off-Road Disclaimer: This product is intended for off-road / competition vehicles only. Not for use on public highways. Please check your local regulations before installation. Frequently Asked Questions Q: Will this fit my 2007 6.6L Duramax LMM truck?A: Yes. This kit is designed for 2007-2010 Chevrolet Silverado 2500HD/3500HD and GMC Sierra 2500HD/3500HD with the 6.6L Duramax LMM engine. Please verify your exact year and model before ordering. Q: Is professional installation required?A: While experienced DIY mechanics can install this kit, we recommend professional installation due to the complexity of accessing EGR components. Q: What tools are needed for installation?A: Standard metric socket set, wrenches, torque wrench, and basic hand tools. Some models may require specialty tools for hard-to-reach bolts. Q: Does this kit come with gaskets and hardware?A: Yes. All necessary gaskets, bolts, nuts, and installation hardware are included in the package. Q: Will this improve fuel economy?A: Many users report improved fuel economy after installation, though results vary based on driving conditions and vehicle configuration. Q: Is this compatible with aftermarket tuners?A: Yes. This hardware kit is compatible with most aftermarket tuning solutions for the 6.6L Duramax LMM platform. Q: What is the warranty on this product?A: iFJF offers a 1-year warranty against manufacturing defects. Please retain your purchase receipt. Related Products Explore more diesel performance parts in our EGR Delete collection: 6.6L Duramax LMM EGR Delete Kits — Complete selection of EGR solutions Diesel Exhaust Systems — Upgrade your exhaust for maximum flow Intake Manifolds & Elbows — High-flow intake upgrades

Read more less