Products

Fuel Filter Replacement for 1992-2002 Chevy GMC 6.5L Diesel — Fits Suburban Tahoe Silverado Sierra Yukon Hummer H1 — TP1256 Premium Fuel Filter — Engineered for 6.5L Diesel The Fuel fuel filter delivers exceptional filtration performance for Chevrolet, GMC 6.5L Diesel. Built with high-efficiency media that removes 99.9% of water and contaminants, protecting your high-pressure common rail injection system from premature wear. Direct replacement for OEM specifications at a competitive aftermarket price. Key Features 10 Micron Filtration — Multi-layer cellulose/synthetic media captures particles as small as 10 microns Water Separation — Hydrophobic barrier strips emulsified water from diesel fuel, preventing injector corrosion OEM-Quality Construction — Manufactured to ISO/TS 16949 quality standards with 100% end-of-line testing Direct Fit — Precision-engineered to match OEM dimensions and mounting points — no modifications required Corrosion Resistant — Coated/plated components withstand diesel fuel, road salt, and moisture exposure Validated for Chevrolet, GMC — Confirmed fitment across all listed applications Compatibility Make Engine Year Range Model Chevrolet/GMC 6.5L Diesel 1992-2000 C/K 1500-3500 Chevrolet 6.5L Diesel 1992-1999 Suburban/Tahoe Chevrolet 6.5L Diesel 1999-2002 Silverado 2500/3500 AM General 6.5L Diesel 1994-2001 Hummer H1 Always verify fitment using the cross-reference part numbers below or contact our support team. Cross-Reference Part Numbers Brand Part Number AC Delco TP1256 GM 25170374 Stanadyne 29110 WIX WF10010 Baldwin BF7979 NAPA FIL3528 Specifications Specification Value Part Number Fuel Brand iFJF Filtration Rating 10 Micron (Nominal) Media Type Cellulose/Synthetic Blend Product Type Fuel Filter Application 6.5L Diesel Vehicle Make Chevrolet, GMC, AM General Material Steel/Plastic Composite Country of Origin China (ISO Certified) Warranty 1 Year / Unlimited Mileage Installation Guide Relieve fuel system pressure — Remove fuel cap and depressurize per vehicle service manual Remove old filter — Unscrew filter housing cap, remove old element, drain housing into approved container Clean housing — Wipe housing interior with clean lint-free cloth, inspect for debris or water Install new O-rings — Lubricate new O-rings with clean diesel fuel, seat properly in grooves Insert new element — Place new filter element into housing, ensuring proper orientation Reassemble and torque — Reinstall cap to manufacturer torque spec (typically 25-35 Nm) Prime fuel system — Cycle key to ON (not START) 3-5 times for 30 seconds each, or use manual primer pump Check for leaks — Start engine, inspect housing and connections for fuel seepage Maintenance Schedule For optimal fuel system protection, replace your fuel filter every 15,000-25,000 miles (or every other oil change) under normal operating conditions. For severe service (heavy towing, dusty environments, high-idle operation), reduce interval to 10,000-15,000 miles. Always replace both primary and secondary filters as a set on two-stage filtration systems. Frequently Asked Questions Q: How often should I replace the fuel fuel filter? For 6.5L Diesel applications, we recommend replacing the fuel filter every 15,000-25,000 miles under normal driving conditions, or every 10,000-15,000 miles for severe service (towing, dusty environments, extended idling). Always replace both primary and secondary filters as a set. Q: What are the symptoms of a clogged fuel filter? Common signs include: hard starting or no-start condition, engine misfire or hesitation under load, reduced fuel economy, check engine light (often P0087 low fuel pressure code), rough idle, and loss of power at highway speeds. Q: Is this filter a direct OEM replacement? Yes. The fuel fuel filter is manufactured to meet or exceed OEM specifications for fit, form, and function. It drops directly into the factory filter housing with no modifications required. Q: Does this filter remove water from diesel fuel? Yes. This fuel water separator filter features a hydrophobic barrier media that effectively strips emulsified water from diesel fuel. Removing water is critical for preventing injector corrosion and microbial growth in modern high-pressure common rail fuel systems. Q: How do I know when to change my fuel filter? Monitor for performance symptoms (hard starts, power loss), follow your manufacturer's recommended service interval, and consider fuel quality — poor-quality diesel or biodiesel blends may require more frequent filter changes. Related Products 🔗 Chevrolet Parts & Filters 🔗 GMC Parts & Filters 🔗 All Diesel Fuel Filters | All iFJF Products Related Blog Posts 📖 Complete Guide: When to Replace Your Diesel Fuel Filter 📖 5 Warning Signs Your Fuel Filter Is Clogged 📖 Duramax LLY/LBZ/LMM Common Issues & Fixes

Read more less

Product Overview Keep your 2008 Dodge Ram 2500 6.7L Cummins turbo diesel running at peak performance with the iFJF Fuel Filter & Crankcase Filter Maintenance Kit. This value-packed kit includes two OEM-spec fuel/water separator filters (FS43257/UF-257) and one CV52001 crankcase ventilation filter — everything you need for a complete fuel system and CCV filter service. Premium filtration media traps water, debris, and contaminants down to 5 microns, protecting your high-pressure common rail injection system from costly damage. Key Features Complete Filter Service Kit: 2x Fuel/Water Separator Filters (FS43257/UF-257) plus 1x CV52001 Crankcase Filter — one-stop maintenance for your 6.7L Cummins. 5-Micron Filtration: High-efficiency filter media captures particles as small as 5 microns, meeting or exceeding OEM filtration specifications. Water Separation: Advanced hydrophobic media separates emulsified water from diesel fuel, protecting injectors and the CP3 high-pressure pump from water damage. CV52001 CCV Filter: Direct replacement for the factory crankcase ventilation filter — maintains proper crankcase pressure and oil mist separation. OEM-Equivalent Quality: Manufactured to the same dimensional and performance specifications as Mopar factory filters at a fraction of the dealer price. Money-Saving Bundle: Purchasing the kit together saves versus buying individual filters separately. Compatibility Year Make Model Engine Filter Type 2008 Dodge / Ram Ram 2500 6.7L Cummins Fuel/Water Separator + CCV Cross-Reference Part Numbers Filter iFJF Part # OEM / Cross Reference Fuel/Water Separator FS43257 / UF-257 Mopar 68065603AA, Fleetguard FS43257, WIX WF10112, Baldwin PF7977 CCV Filter CV52001 Mopar 68002433AC, Fleetguard CV52001 Specifications Specification Detail Fuel Filter Micron Rating 5 Micron (nominal) Water Separation Efficiency >95% Fuel Filter Type Spin-on cartridge with water drain CCV Filter Type Coalescing media element Recommended Service Interval Every 15,000 miles or 12 months (fuel filter) / 60,000 miles (CCV filter) Why Choose iFJF iFJF Direct provides premium aftermarket filtration solutions engineered for the demanding duty cycles of diesel truck ownership. Our FS43257 fuel filters use high-grade cellulose/synthetic blend media that delivers the same filtration efficiency as Fleetguard OEM filters — without the dealership markup. Every filter undergoes burst-pressure testing and micron-rating verification before leaving our warehouse. Frequently Asked Questions Q: Will these filters fit my 2008 Ram 2500 6.7L?A: Yes. The FS43257/UF-257 fuel filter and CV52001 crankcase filter are exact-fit replacements for the 2008 Dodge Ram 2500 with the 6.7L Cummins turbo diesel engine. Q: How often should I change the fuel filter?A: We recommend fuel filter replacement every 15,000 miles or 12 months, whichever comes first. If you operate in dusty conditions or use biodiesel blends, consider more frequent changes at 10,000-mile intervals. Q: Does the fuel filter include a water drain?A: Yes, the FS43257/UF-257 filter housing includes a water drain valve at the bottom. Drain accumulated water during every oil change or when the Water-In-Fuel warning light illuminates. Q: What's the CCV filter for?A: The CV52001 crankcase ventilation filter separates oil mist from crankcase vapors before they're routed back to the intake. A clogged CCV filter can cause excessive crankcase pressure, oil leaks, and turbo seal failure. Q: Are these genuine Mopar filters?A: These are iFJF premium aftermarket filters manufactured to meet or exceed OEM specifications. They provide equivalent filtration performance at a more affordable price point.

Read more less

Product Overview The iFJF PU 936/1 X Fuel Filter is a precision-engineered diesel fuel filter for Volkswagen and Audi TDI engines. Designed for the popular 1.9L and 2.0L TDI engines found in the VW Beetle, Golf, Jetta, and Audi A3 from 2003-2010, this filter provides critical protection for the high-pressure Pumpe Düse (PD) and common rail fuel injection systems. Manufactured to IATF 16949 quality standards for consistent, reliable filtration performance. Key Features TDI-Specific Filtration: High-efficiency filter media captures particles as fine as 3-5 microns — essential for protecting PD unit injectors and common rail systems operating at 1,800+ bar. Broad VW/Audi Coverage: Fits Beetle, Golf, Jetta (Mk4/Mk5), and Audi A3 with 1.9L TDI (BEW, BRM) and 2.0L TDI (CBEA, CJAA) engines. Water Separation: Integrated water-separating media prevents injector corrosion and microbial growth in the fuel system. Direct OEM Replacement: Precision-engineered to match factory filter dimensions — no modifications, no adapters needed. IATF 16949 Certified: Meets or exceeds VW/Audi OEM specifications for filtration efficiency and flow rate. Vehicle Compatibility Make Model Years Engine Volkswagen Beetle TDI 2003-2010 1.9L / 2.0L TDI Volkswagen Golf TDI (Mk4/Mk5) 2003-2010 1.9L / 2.0L TDI Volkswagen Jetta TDI (Mk4/Mk5) 2003-2010 1.9L / 2.0L TDI Audi A3 TDI 2003-2010 1.9L / 2.0L TDI Maintenance Interval VW recommends fuel filter replacement every 20,000 miles for PD engines and every 40,000 miles for common rail engines. However, many TDI enthusiasts and independent shops recommend replacement every 20,000 miles regardless of engine type — fuel filter cost is minimal compared to injector replacement which can exceed $2,000 per injector. Frequently Asked Questions Q: Will this fit my 2006 Jetta TDI?A: Yes. The PU 936/1 X fits 2003-2010 Jetta, Golf, Beetle TDI, and Audi A3 TDI with 1.9L or 2.0L engines. Q: How often should I change the TDI fuel filter?A: Every 20,000 miles is recommended by most TDI specialists. Fuel filter cost is minimal compared to the $2,000+ cost of replacing a single PD or CR injector. Q: What's the difference between 1.9L and 2.0L TDI filters?A: This filter fits both. The PU 936/1 X is compatible with 1.9L PD (BEW/BRM) and 2.0L common rail (CBEA/CJAA) TDI engines. Q: Can I change this myself?A: Yes. The TDI fuel filter is located in the engine bay and is a straightforward DIY job. Use VCDS or a handheld pump to prime the system, or cycle the key several times before starting. Q: Will a dirty filter cause power loss?A: Absolutely. A restricted fuel filter causes fuel starvation under load, resulting in reduced power, hesitation, and potential limp mode. Regular filter changes maintain performance and fuel economy. Related Products LR009705 Fuel Filter for Land Rover 2.7L TDV6

Read more less

Product Overview Upgrade your vehicle with this premium fuel injection pump gear puller tool, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for 1988-2012 5.9L 6.7L Engines VE P7100 VP44 CP3 and VE CGP020 Removal Tool (1988-2012), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles 1988-2012 5.9L 6.7L Engines VE P7100 VP44 CP3 and VE CGP020 Removal Tool Year Range 1988-2012 Engine Type 5.9L Replaces OEM Part # Injection, Puller, 1988-2012, Engines, CGP020, Removal iFJF SKU FJ-X-CG03 Brand iFJF Technical Specifications Specification Detail Product Type Fuel Injection Pump Gear Puller Tool — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the fuel injection pump gear puller tool and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Diesel Specialty Tools 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 12642623 Fuel Filter Head Kit w/ 1R-0750 for Duramax 6.6L 📚 Installation & Maintenance Guides 4" Straight Pipe Kit Install 05 Dodge 3500 Cummins How to Install Tie Rods on GM Truck | Dmax XD Upgrade Ball Joint Removal/Install on 2018 Ram 4500/5500 Diesel

Read more less

Product Overview Upgrade your vehicle with this premium fuel injection rail pressure sensor, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for F150, Mustang, Explorer (2004-2014), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles F150, Mustang, Explorer Year Range 2004-2014 Engine Type 2014L Replaces OEM Part # Injection, Pressure, Sensor, Mustang, Explorer, 0261230093 iFJF SKU FJ-XL-FIPSS-CM5229 Brand iFJF Technical Specifications Specification Detail Product Type Fuel Injection Rail Pressure Sensor — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the fuel injection rail pressure sensor and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Fuel System Sensors 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 12642623 Fuel Filter Head Kit w/ 1R-0750 Refit for Duramax 6.6L 12639277 Water in Fuel Sensor Duramax 6.6L 11029 Diesel Install Kit w/ Brass Rollover Valve 11025 Diesel Fuel Tank Aux Mount Kit 📚 Installation & Maintenance Guides How to Install iFJF R12T Fuel Filter/Water Separator Chevy Express / GMC Savana Duramax Diesel Van Maintenance Guide How To Perform A Cooling System Flush On Your Diesel Engine

Read more less

Product Overview Upgrade your vehicle with this premium common rail fuel plug, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for Ram (2003-2007), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles Ram Year Range 2003-2007 Engine Type 5.9L Replaces OEM Part # Injector, Common, Plug-1050070, 2003-2007, Fitment, Cum-mins iFJF SKU FJ-AD12-SI Brand iFJF Technical Specifications Specification Detail Product Type Common Rail Fuel Plug — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the common rail fuel plug and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Diesel Fuel System 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 12642623 Fuel Filter Head Kit w/ 1R-0750 Refit for Duramax 6.6L 12639277 Water in Fuel Sensor Duramax 6.6L 11029 Diesel Install Kit w/ Brass Rollover Valve 11025 Diesel Fuel Tank Aux Mount Kit 📚 Installation & Maintenance Guides 4" Straight Pipe Kit Install 05 Dodge 3500 Cummins Best Water Separator Fuel Filter for Diesel & Marine Engines How To Perform A Cooling System Flush On Your Diesel Engine

Read more less

Product Overview Upgrade your vehicle with this premium fuel pressure regulator gasket kit, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for Ram (2001-2024), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles Ram Year Range 2001-2024 Engine Type 05L Replaces OEM Part # Pressure, Regulator, Install, Gasket, Duramax, Number iFJF SKU FJ-HZ-WJ16 Brand iFJF Technical Specifications Specification Detail Product Type Fuel Pressure Regulator Gasket Kit — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the fuel pressure regulator gasket kit and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Fuel System 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 12642623 Fuel Filter Head Kit w/ 1R-0750 Refit for Duramax 6.6L 12639277 Water in Fuel Sensor Duramax 6.6L 11029 Diesel Install Kit w/ Brass Rollover Valve 11025 Diesel Fuel Tank Aux Mount Kit 📚 Installation & Maintenance Guides 2006-2007 LBZ Duramax Cold Air Intake Install Guide Chevy Express / GMC Savana Duramax Diesel Van Maintenance Guide How To Perform A Cooling System Flush On Your Diesel Engine

Read more less

Fuel Return Connector for 2017-2020 Ford 6.7L Powerstroke F-250-550 OEM-Spec Fuel Return Connector Replace your brittle or leaking fuel return line connector with this precision-molded replacement for 6.7L Powerstroke. Manufactured from high-temperature ABS plastic with OEM-spec quick-disconnect fittings. A leaking return connector can cause hard starts, fuel odor, and reduced efficiency — this direct-fit replacement restores factory sealing integrity. Key Features High-Temp ABS Plastic — Withstands under-hood temperatures without brittleness OEM-Quality Construction — Manufactured to ISO/TS 16949 quality standards with 100% end-of-line testing Direct Fit — Precision-engineered to match OEM dimensions and mounting points — no modifications required Corrosion Resistant — Coated/plated components withstand diesel fuel, road salt, and moisture exposure Validated for Ford — Confirmed fitment across all listed applications Compatibility Make Engine Year Range Model Ford 6.7L Powerstroke 2017-2020 F-250/350/450/550 Super Duty Always verify fitment using the cross-reference part numbers below or contact our support team. Cross-Reference Part Numbers Brand Part Number Ford HC3Z-9A564-A Motorcraft FD-4625 Dorman 904-309 Specifications Specification Value Part Number Fuel Brand iFJF Product Type Fuel Filter Parts Application 6.7L Powerstroke Vehicle Make Ford Material Steel/Plastic Composite Country of Origin China (ISO Certified) Warranty 1 Year / Unlimited Mileage Installation Guide Professional installation is recommended. Always refer to your vehicle or engine service manual for specific torque specifications and priming procedures. Replace all O-rings and seals during filter service — never reuse old seals. Maintenance Schedule Inspect during every filter service for signs of wear, cracking, or corrosion. Replace immediately if any damage is detected. Frequently Asked Questions Q: Is this compatible with my 6.7L Powerstroke fuel system? Yes, this component is designed for 6.7L Powerstroke fuel systems and matches OEM specifications for fit and function. Q: Is professional installation recommended? Installation is straightforward for experienced DIY mechanics with basic hand tools. However, since this is a fuel system component, proper installation is critical to prevent leaks. Q: What material is used in construction? Manufactured from high-grade materials rated for diesel fuel exposure and under-hood/under-vehicle conditions. Corrosion-resistant coating ensures long service life. Q: Do you offer a warranty? Yes, all iFJF products are backed by a 1-year warranty against manufacturing defects. Q: How fast is shipping? All orders ship from our US warehouse within 1-2 business days. Standard shipping is 3-7 business days. Expedited options are available at checkout. Related Products 🔗 Ford Parts & Filters 🔗 All Diesel Fuel Filters | All iFJF Products Related Blog Posts 📖 Ford Powerstroke Fuel System Maintenance

Read more less

Product Overview Upgrade your vehicle with this premium fuel tank gas cap, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for CL, CLK, CLS, GLK (2001-2018), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles CL, CLK, CLS, GLK Year Range 2001-2018 Replaces OEM Part # Assembly, 2214700605, Mercedes, Replacement, Tether, cracked iFJF SKU FJ-CAP14-2214-02 Brand iFJF Technical Specifications Specification Detail Product Type Fuel Tank Gas Cap — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the fuel tank gas cap and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Fuel System 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 📚 Installation & Maintenance Guides 1965-1967 Mustang 200ci Inline-6 Carburetor Replacement Guide How to Tune an Autolite 1101 Carburetor on Classic Ford

Read more less

Product Overview Upgrade your vehicle with this premium fuel water separator, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for 175 -300HP Mercury Outboard, this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles 175 -300HP Mercury Outboard Year Range See description Engine Type 3.4L Replaces OEM Part # Separator, Assembly, 35-8M0106635, Mercury, Outboard, quality iFJF SKU FJ-6635-ZH Brand iFJF Technical Specifications Specification Detail Product Type Fuel Water Separator — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the fuel water separator and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Fuel System 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 122-0833 Oil Filter for Cummins Onan RV Generator 122-0836 Oil Filter for Cummins Onan RV QG 5500/7000 📚 Installation & Maintenance Guides Best Water Separator Fuel Filter for Diesel & Marine Engines Cummins Onan RV Generator Fuel Pump & Filter Replacement Guide

Read more less

Product Overview Upgrade your vehicle with this premium garage door safety sensor, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for A5, this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles A5 Year Range See description Replaces OEM Part # Garage, Opener, Safety, Sensor, 41A5034, Replaces iFJF SKU FJ-LOCK-5034 Brand iFJF Technical Specifications Specification Detail Product Type Garage Door Safety Sensor — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the garage door safety sensor and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Garage & Home 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question

Read more less

Product Overview Upgrade your vehicle with this premium fuel tank gas cap, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for Gladiator (2019-2023), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles Gladiator Year Range 2019-2023 Replaces OEM Part # Holder, Compatible, 2019-2023, Gladiator, PERFECT, Designed iFJF SKU FJ-JP-GCH01-CK Brand iFJF Technical Specifications Specification Detail Product Type Fuel Tank Gas Cap — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the fuel tank gas cap and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Fuel System 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 12642623 Fuel Filter Head Kit w/ 1R-0750 Refit for Duramax 6.6L 12639277 Water in Fuel Sensor Duramax 6.6L 11029 Diesel Install Kit w/ Brass Rollover Valve 11025 Diesel Fuel Tank Aux Mount Kit 📚 Installation & Maintenance Guides Why You Need a Bluetooth Kill Switch for Your RV or Truck

Read more less

GF652/FF5026 Fuel Filter 1988-2006 GM C/K Silverado Sierra Yukon Tahoe Premium Fuel Filter — Engineered for 5.7L V8, 7.4L V8 The GF652/FF5026 fuel filter delivers exceptional filtration performance for Chevrolet, GMC 5.7L V8, 7.4L V8. Built with high-efficiency media that removes 99.9% of water and contaminants, protecting your high-pressure common rail injection system from premature wear. Direct replacement for OEM specifications at a competitive aftermarket price. Key Features 10 Micron Filtration — Multi-layer cellulose/synthetic media captures particles as small as 10 microns Water Separation — Hydrophobic barrier strips emulsified water from diesel fuel, preventing injector corrosion OEM-Quality Construction — Manufactured to ISO/TS 16949 quality standards with 100% end-of-line testing Direct Fit — Precision-engineered to match OEM dimensions and mounting points — no modifications required Corrosion Resistant — Coated/plated components withstand diesel fuel, road salt, and moisture exposure Validated for Chevrolet, GMC — Confirmed fitment across all listed applications Compatibility Make Engine Year Range Model Chevrolet/GMC 5.7L/7.4L/6.5L 1988-2000 C/K 1500-3500 Chevrolet 5.7L/6.5L 1992-2006 Suburban/Tahoe GMC 5.7L/7.4L 1992-2006 Yukon/Yukon XL Always verify fitment using the cross-reference part numbers below or contact our support team. Cross-Reference Part Numbers Brand Part Number AC Delco GF652 WIX 33481 NAPA FIL3481 Fram G3727 Baldwin BF7722 GM 25010649 Specifications Specification Value Part Number GF652/FF5026 Brand iFJF Filtration Rating 10 Micron (Nominal) Media Type Cellulose/Synthetic Blend Product Type Fuel Filter Application 5.7L V8, 7.4L V8 Vehicle Make Chevrolet, GMC Material Steel/Plastic Composite Country of Origin China (ISO Certified) Warranty 1 Year / Unlimited Mileage Installation Guide Relieve fuel system pressure — Remove fuel cap and depressurize per vehicle service manual Remove old filter — Unscrew filter housing cap, remove old element, drain housing into approved container Clean housing — Wipe housing interior with clean lint-free cloth, inspect for debris or water Install new O-rings — Lubricate new O-rings with clean diesel fuel, seat properly in grooves Insert new element — Place new filter element into housing, ensuring proper orientation Reassemble and torque — Reinstall cap to manufacturer torque spec (typically 25-35 Nm) Prime fuel system — Cycle key to ON (not START) 3-5 times for 30 seconds each, or use manual primer pump Check for leaks — Start engine, inspect housing and connections for fuel seepage Maintenance Schedule For optimal fuel system protection, replace your fuel filter every 15,000-25,000 miles (or every other oil change) under normal operating conditions. For severe service (heavy towing, dusty environments, high-idle operation), reduce interval to 10,000-15,000 miles. Always replace both primary and secondary filters as a set on two-stage filtration systems. Frequently Asked Questions Q: How often should I replace the gf652/ff5026 fuel filter? For 5.7L V8 applications, we recommend replacing the fuel filter every 15,000-25,000 miles under normal driving conditions, or every 10,000-15,000 miles for severe service (towing, dusty environments, extended idling). Always replace both primary and secondary filters as a set. Q: What are the symptoms of a clogged fuel filter? Common signs include: hard starting or no-start condition, engine misfire or hesitation under load, reduced fuel economy, check engine light (often P0087 low fuel pressure code), rough idle, and loss of power at highway speeds. Q: Is this filter a direct OEM replacement? Yes. The gf652/ff5026 fuel filter is manufactured to meet or exceed OEM specifications for fit, form, and function. It drops directly into the factory filter housing with no modifications required. Q: Does this filter remove water from diesel fuel? Yes. This fuel water separator filter features a hydrophobic barrier media that effectively strips emulsified water from diesel fuel. Removing water is critical for preventing injector corrosion and microbial growth in modern high-pressure common rail fuel systems. Q: How do I know when to change my fuel filter? Monitor for performance symptoms (hard starts, power loss), follow your manufacturer's recommended service interval, and consider fuel quality — poor-quality diesel or biodiesel blends may require more frequent filter changes. Related Products 🔗 Chevrolet Parts & Filters 🔗 GMC Parts & Filters 🔗 All Diesel Fuel Filters | All iFJF Products Related Blog Posts 📖 Complete Guide: When to Replace Your Diesel Fuel Filter 📖 5 Warning Signs Your Fuel Filter Is Clogged

Read more less

Product Overview Upgrade your vehicle with this premium suspension enhancement system, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for Silverado, Sierra (1996-2010), this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles Silverado, Sierra Year Range 1996-2010 Replaces OEM Part # GMFK25S, Suspension, Enhancement, System, 1996-2010, Silverado iFJF SKU FJ-GMFK25S Brand iFJF Technical Specifications Specification Detail Product Type Suspension Enhancement System — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the suspension enhancement system and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Suspension 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 🛒 Related Products 10-Piece Front Suspension Kit for Audi A4/A5/S4/S5/Q5 10PCS Control Arm Kit for BMW X5 E53 📚 Installation & Maintenance Guides How to Install Tie Rods on GM Truck | Dmax XD Upgrade Ball Joint Removal/Install on 2018 Ram 4500/5500 Diesel How to Install a 3" Body Lift on 1995 Ford F-150

Read more less

Product Overview Upgrade your vehicle with this premium golf cart wheel covers, precision-engineered for exact fitment and long-lasting performance. Designed as a direct replacement for CL, this aftermarket component meets or exceeds OEM specifications for durability, reliability, and ease of installation. Whether you're a professional mechanic or a weekend DIYer, this is the cost-effective alternative to dealership pricing. Key Features & Benefits Direct Bolt-On Fit: Precision-manufactured to factory tolerances — no modifications required for installation. Premium-Grade Materials: Constructed from high-strength materials with anti-corrosion treatment for maximum service life in all climates. OEM-Spec Engineering: Manufactured to match or exceed original equipment specifications — guaranteed compatibility and performance. Complete Replacement Kit: Includes all necessary hardware, seals, and gaskets for a complete installation. Quality Tested: Each unit passes multi-point inspection before shipment to ensure dependable, trouble-free operation. Vehicle Compatibility Attribute Specification Compatible Vehicles CL Year Range See description Replaces OEM Part # Covers, Replacement, Y-amaha, Chrome, Design, Silver iFJF SKU FJ-SSCC-SI Brand iFJF Technical Specifications Specification Detail Product Type Golf Cart Wheel Covers — Aftermarket Replacement Condition Brand New — Never Installed Construction Premium-grade materials — rust, corrosion & heat resistant Installation Type Direct bolt-on replacement — professional installation recommended Warranty 30-day satisfaction guarantee — hassle-free returns Why Choose iFJF Parts? OEM-Grade Quality: Every iFJF component is manufactured to meet or exceed factory specifications — no compromises on materials, tolerances, or durability. Multi-Point QC Inspection: Each unit undergoes rigorous quality testing before leaving our facility, ensuring reliable performance right out of the box. US-Based Inventory: Products ship from US warehouses — no 30-day overseas wait times. Most orders ship within 1-2 business days. Dedicated Support Team: Our automotive specialists are available to answer fitment questions and provide installation guidance. Risk-Free Purchase: 30-day hassle-free return policy — if it doesn't fit or you're not satisfied, we'll make it right. Installation Guidelines Verify Fitment: Check the compatibility table above and compare with your vehicle's year, make, model, and engine before ordering. Compare Parts: Before installation, compare the new part side-by-side with your old unit to confirm identical fitment. Surface Preparation: Clean all mounting surfaces thoroughly to ensure proper seating and seal integrity. Torque Specifications: Use the torque values specified in your vehicle's factory service manual — do not over-tighten. Professional Installation: While DIY-friendly, we recommend professional installation for safety and optimal results. Frequently Asked Questions Q: Will this fit my specific vehicle?A: Please verify using the compatibility table above. Match your vehicle's year, make, model, and engine. If you're still unsure, send us your VIN or vehicle details — we'll confirm compatibility within 24 hours. Q: Is this a genuine OEM part?A: This is a premium aftermarket replacement manufactured to OEM specifications. It delivers equivalent or better quality at a fraction of dealership pricing. Q: What tools do I need for installation?A: Most installations require only basic hand tools. We recommend checking your vehicle's service manual for any specialized tools needed for your specific application. Q: What's included in the package?A: The package includes the golf cart wheel covers and all necessary components as shown in product images. Hardware, seals, and gaskets are included where applicable. Q: How fast is shipping?A: Orders ship from our US warehouses within 1-2 business days. Standard delivery is typically 3-7 business days. Express shipping options are available at checkout. Q: What if it doesn't fit?A: We offer a 30-day hassle-free return policy. If the part doesn't fit or you're unsatisfied for any reason, contact us for a prepaid return label and full refund. 🔗 Related Products & Resources Complete your setup and get the most from your purchase: 📦 Browse All Golf Cart Accessories 🛒 Shop All iFJF Parts 📖 Read Installation & Maintenance Guides ❓ Ask a Fitment Question 📖 Related Articles Club Car Wheel Hub Bearing Replacement Guide Step-by-step DIY with torque specs, tools list, and OEM cross-reference for DS & Precedent. Read Guide → Golf Cart Wheel Covers Installation Guide 15-minute chrome hub cap upgrade for EZGO, Club Car & Yamaha. No tools needed. Read Guide →

Read more less

EZGO Front Wheel Hub Assembly — 19932G1 Replacement (2-Pack) The iFJF 19932G1 front wheel hub assembly is a precision-engineered direct replacement for EZGO golf carts manufactured from 1979 through 2001.5. These heavy-duty hubs restore smooth steering and eliminate bearing noise on older fleet and personal carts. Each hub comes with bearing races pre-installed for a straightforward bolt-on installation. Key Features Complete Assembly: Bearing races pre-installed — no press work required 2-Pack Kit: Includes driver and passenger side hubs for complete front-end service Forged Steel: Heavy-duty construction with rust-resistant black coating Exact OEM Fit: Precision CNC-machined to EZGO 19932G1 specifications Gas & Electric Compatible: Works on both engine types Lug Studs Installed: 4-lug pattern, ready to mount Compatibility Vehicle Year Range Engine Type EZGO Marathon 1979–1994 Gas & Electric EZGO Medalist 1994–1999 Gas & Electric EZGO TXT (DCS) 1995–2001.5 Gas & Electric ⚠️ NOT compatible with 2001.5 and newer EZGO models — use part number 70895G01 for those. Specifications Specification Value Part Number 19932G1 Bolt Pattern 4 x 4" (4 x 101.6mm) Lug Stud Size 1/2"-20 Bearing Type Tapered roller (pre-installed) Material Forged steel Quantity 2 hubs (left + right) Finish Black corrosion-resistant coating Why Replace Your Wheel Hubs? Worn front hubs on older EZGO carts are a leading cause of steering vibration, uneven tire wear, and bearing failure. Telltale signs you need replacement: Humming or grinding noise from front wheels during operation Steering wheel vibration, especially at higher speeds Uneven tire wear on front tires Noticeable wheel play when rocking at 12 and 6 o'clock Grease leaking from bearing area Installation Guide Bolt-on replacement — no bearing press needed. Typical install time: 30–45 minutes per side. Jack up front end, secure with jack stands Remove front wheel (4 lug nuts) Remove cotter pin, castle nut, washer from spindle Slide off old hub assembly Clean spindle, apply fresh bearing grease Slide new 19932G1 hub onto spindle Install washer and castle nut, torque to specification Install new cotter pin, remount wheel Frequently Asked Questions Q: How do I know if I need 19932G1 or 70895G01? A: If your EZGO is 2001.5 or newer, you need 70895G01. If it's 1979 through early 2001, you need 19932G1. Check the serial number plate under the glove box. Q: Are the bearings included? A: Yes, each hub comes with tapered roller bearing races pre-installed — no press required. Q: Will this fit my 1998 EZGO TXT electric? A: Yes! The 19932G1 fits 1995–2001.5 TXT models including DCS electric carts. Q: Do you recommend replacing both sides? A: Absolutely. Replacing both front hubs at the same time ensures even wear and consistent handling. Q: Are inner seals included? A: Inner bearing seals are not included. We recommend replacing worn seals at the same time for best results. Related Products & Resources Shop More Golf Cart Parts Browse our full selection at unbeatable prices. View All Golf Cart Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts

Read more less

EZGO Front Wheel Hub Assembly — 70895G01 Replacement (2-Pack) The iFJF 70895G01 front wheel hub assembly is a precision-engineered direct replacement for EZGO golf carts manufactured from 2001.5 and up. Whether you're maintaining a fleet vehicle or restoring your personal cart, these heavy-duty hubs eliminate wobble, grinding, and premature bearing failure caused by worn OEM units. Key Features Complete Assembly: Each hub comes with bearing races pre-installed — no pressing required 2-Pack Value: Includes both driver and passenger side hubs in one kit Heavy-Duty Construction: Forged steel construction with corrosion-resistant finish Precision Fit: CNC-machined to exact EZGO 70895G01 specifications Universal Fitment: Works on both gas and electric EZGO models Lug Studs Included: 4-lug pattern pre-installed, ready to bolt on Compatibility Vehicle Year Range Engine Type EZGO TXT 2001.5–2013 Gas & Electric EZGO RXV 2008–2022 Gas & Electric EZGO Valor 2018–2022 Gas & Electric EZGO Express S4/L6 2013–2022 Gas & Electric ⚠️ NOT compatible with pre-2001.5 EZGO models (Marathon, Medalist, early TXT). For 1979–2001.5 models, use part number 19932G1. Specifications Specification Value Part Number 70895G01 Bolt Pattern 4 x 4" (4 x 101.6mm) Lug Stud Size 1/2"-20 Bearing Type Tapered roller (pre-installed) Material Forged steel Quantity 2 hubs (left + right) Finish Black corrosion-resistant coating Why Replace Your Wheel Hubs? Worn front wheel hubs are one of the most common sources of steering vibration and uneven tire wear on EZGO golf carts. Symptoms include: Grinding or humming noise from front wheels while driving Steering wheel wobble or vibration at speed Uneven front tire wear patterns Excessive play when rocking the tire at 12 and 6 o'clock positions Loose-feeling steering response Installation Overview This is a bolt-on replacement requiring basic mechanical skills. Typical installation time is 30–45 minutes per side with standard hand tools. No bearing press required — the races come pre-installed in each hub assembly. Jack up the front of the cart and secure with jack stands Remove the front wheel (4 lug nuts) Remove the cotter pin, castle nut, and washer from the spindle Slide the old hub assembly off the spindle Clean the spindle surface and apply fresh grease Slide the new 70895G01 hub onto the spindle Install the washer and castle nut, torque to spec Insert a new cotter pin and reinstall the wheel Pro Tip: Always replace both sides at the same time for even wear and consistent handling. Frequently Asked Questions Q: Will this fit my 2008 EZGO RXV? A: Yes! The 70895G01 hub fits all EZGO RXV models from 2008 to 2022, both gas and electric. Q: Are the bearings already pressed in? A: Yes, each hub assembly comes with tapered roller bearing races pre-installed from the factory. No press needed. Q: What's the difference between 70895G01 and 19932G1? A: The 70895G01 fits 2001.5 and newer EZGO models, while the 19932G1 fits 1979–2001.5 EZGO models. Check your cart's year before ordering. Q: Do I need to replace the inner seals too? A: The inner bearing seals are not included in this hub assembly kit. If your seals are worn, we recommend replacing them at the same time (sold separately). Q: Does this include lug nuts? A: No, lug nuts are not included. The hub comes with lug studs pre-installed — reuse your existing lug nuts. Q: How long do these hubs typically last? A: With proper bearing lubrication and normal golf course use, these forged steel hubs typically last 3–5 years or more before needing replacement. Related Products & Resources Shop More Golf Cart Parts Browse our full selection at unbeatable prices. View All Golf Cart Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts

Read more less

GP500520 Pressure Balancing Cartridge — Kohler Rite-Temp Replacement The iFJF GP500520 cartridge is a precision-engineered replacement for Kohler Rite-Temp pressure balancing shower valves. When your shower temperature swings wildly between hot and cold — especially when someone flushes a toilet or runs the washing machine — the pressure balancing cartridge is almost always the culprit. This direct-fit replacement restores stable, comfortable shower temperature control. Key Features Pressure Balancing Technology: Maintains consistent water temperature even when water pressure fluctuates Direct Replacement: Drop-in fit for Kohler Rite-Temp valves — no modifications needed Premium Materials: High-grade plastic body with brass stem and ceramic disc internals Smooth Operation: Precision-engineered spool valve eliminates sticking and stiff handle operation Anti-Scald Protection: Automatically adjusts mix ratio to prevent sudden hot water surges DIY-Friendly: Installs in 15–20 minutes with basic tools Compatibility Brand Valve System Part Numbers Kohler Rite-Temp GP500520 Kohler Rite-Temp GP76851 Kohler Rite-Temp K-304 All variants Kohler Rite-Temp K-8300 Series K-8304, K-8305, K-8306 Specifications Specification Value Part Number GP500520 Valve Type Pressure Balancing Stem Material Brass Body Material High-grade engineered plastic Connection Size 1/2" Application Single-handle shower valve Symptoms of a Bad Cartridge Shower temperature suddenly goes hot or cold without adjusting the handle Water temperature changes when other fixtures are used (toilet flush, dishwasher, etc.) Handle is stiff or difficult to turn Water continues to drip from the shower head when the valve is off Uneven hot/cold mix — can't find a comfortable temperature Installation Overview Turn off water supply to the shower valve (main shut-off or integral stops) Remove the handle, trim plate, and any retaining clips Pull out the old cartridge using pliers or a cartridge puller tool Clean the valve body interior, removing any debris or mineral buildup Insert the new GP500520 cartridge, ensuring proper alignment Reinstall the retaining clip, trim plate, and handle Turn water back on and test for leaks and smooth operation Pro Tip: Apply a thin layer of silicone plumber's grease to the O-rings before installation for easier future removal. Frequently Asked Questions Q: How do I know if I have a Rite-Temp valve? A: Kohler Rite-Temp valves have a single handle and are labeled "Rite-Temp" on the trim plate. They were installed in millions of homes from the 1990s to present. Remove the handle and trim — the cartridge shape will match the GP500520. Q: Is this an OEM Kohler part? A: This is a high-quality aftermarket replacement manufactured to meet or exceed OEM GP500520 specifications at a fraction of the dealer price. Q: What's the difference between GP500520 and GP76851? A: The GP500520 is the cartridge only. The GP76851 includes both the cartridge and the mixer cap. If your cap is also worn or leaking, consider the combo kit for a complete rebuild. Q: Can I install this myself or do I need a plumber? A: Most DIYers with basic home repair experience can replace this cartridge in 15–20 minutes. No specialty tools required beyond a screwdriver and adjustable wrench. Q: My water is very hard — will this cartridge last? A: Hard water can shorten cartridge life. We recommend installing a whole-house water softener or regularly cleaning the cartridge every 12–18 months in hard water areas. Related Products & Resources Shop More Plumbing Parts Browse our full selection at unbeatable prices. View All Plumbing Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts

Read more less

GP51487 Tank Bolt Assembly Kit — Kohler Wellworth Replacement The iFJF GP51487 tank bolt assembly kit provides everything you need to stop leaks and re-secure your Kohler toilet tank. Designed specifically for the Kohler Wellworth triangle-shaped tank-to-bowl connection, this kit replaces worn-out bolts, gaskets, and washers that cause water pooling around the base of your toilet tank. Key Features Complete Kit: Includes all bolts, gaskets, washers, and nuts for a full tank-to-bowl rebuild Triangle Gasket Design: Precision-molded rubber gasket matches the unique Kohler Wellworth tank shape Corrosion-Resistant Bolts: Solid brass bolts won't rust or seize like steel alternatives Leak-Proof Seal: High-quality rubber washers compress evenly for a watertight fit Direct OEM Replacement: Identical fit to Kohler GP51487 assembly 15-Minute Install: All parts included — no extra trips to the hardware store Compatibility Brand Model Tank Shape Kohler Wellworth Triangle Kohler Wellworth Lite Triangle ⚠️ Verify your tank-to-bowl connection is triangular before ordering. Standard round/oval gasket toilets require a different kit. What's Included Component Material Quantity Tank Bolts Brass 2 Flat Washers Stainless Steel 2 Rubber Washers EPDM Rubber 2 Hex Nuts Brass 2 Triangle Tank Gasket Rubber 1 Signs You Need a New Tank Bolt Kit Water pooling around the base of the toilet tank (not the floor — that's a wax ring issue) Visible rust or corrosion on existing tank bolts Tank wobbles or shifts when you sit on the toilet Constant condensation or dampness at the tank-to-bowl joint Bolts are seized and cannot be tightened further Installation Steps Shut off the water supply valve and flush to empty the tank Disconnect the water supply line from the fill valve Remove the old tank bolts — you may need penetrating oil if seized Lift the tank off the bowl and clean both mating surfaces thoroughly Remove the old gasket and any residue Place the new triangle gasket into the tank opening Insert new brass bolts through the tank holes with rubber washers underneath Carefully lower the tank onto the bowl, guiding the bolts through the bowl holes Install flat washers and nuts from below, hand-tighten evenly Use a wrench to snug both nuts equally — DO NOT overtighten (cracks porcelain!) Reconnect the water supply, turn on the valve, and check for leaks Frequently Asked Questions Q: How do I know if my toilet needs the triangle or round gasket? A: The Kohler Wellworth uses a distinct triangular tank-to-bowl seal. If you shine a flashlight between the tank and bowl and see a triangular shape, this kit is correct for your toilet. Q: Can I use this on non-Kohler toilets? A: This kit is specifically designed for the Kohler Wellworth's unique triangle connection. It will not properly seal round-gasket toilets from other brands. Q: How tight should I make the tank bolts? A: Hand-tighten plus 1/4 to 1/2 turn with a wrench. Overtightening is the #1 cause of cracked toilet tanks. Tighten both bolts evenly in small increments. Q: Do I need to replace the fill valve at the same time? A: Not required, but if your toilet is over 5 years old, replacing the fill valve and flapper while the tank is off is a smart preventive maintenance step. Related Products & Resources Shop More Plumbing Parts Browse our full selection at unbeatable prices. View All Plumbing Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts Related Guide Read: Fix Your Kohler Rite-Temp Shower Valve

Read more less

Kohler Rite-Temp Mixer Cap & Cartridge Kit — GP76851 The iFJF GP76851 complete service kit includes both the pressure balancing cartridge unit and mixer cap, providing everything needed to restore proper function to your Kohler Rite-Temp shower valve. This comprehensive kit addresses the three most common Rite-Temp failure modes: temperature fluctuation, handle stiffness, and shower head dripping. What's Included Pressure Balancing Unit Cartridge: The main valve cartridge that controls water mixing and maintains consistent temperature Mixer Cap: The retaining cap that secures the cartridge and provides the temperature limit stop adjustment All Required O-Rings & Seals: Pre-installed for easy installation Key Features OEM Equivalent: Manufactured to match Kohler's exact specifications for pressure balance performance Temperature Limit Stop: Adjustable mixer cap allows setting maximum hot water temperature for anti-scald safety Smooth Handle Operation: Precision-machined stem ensures effortless rotation without binding Drip-Free Sealing: Advanced elastomer seals prevent the nuisance dripping common with worn OEM cartridges Compatibility Brand Valve Type Common Models Kohler Rite-Temp Pressure Balance K-304, K-8300, K-8304, K-8310, K-T9477, K-TS396 FAQ Q: What's the difference between this and just the cartridge alone?A: This kit includes both the cartridge AND the mixer cap. The mixer cap can wear separately and cause temperature control issues even with a new cartridge. Replacing both ensures a complete fix. Q: How long does a Kohler cartridge typically last?A: 5-10 years depending on water quality. Hard water or high chlorine content can reduce lifespan to 3-5 years. If your home is 10+ years old and the cartridge has never been replaced, it's due. Q: Do I need plumber's grease for installation?A: The cartridge comes pre-lubricated. However, applying a thin coat of silicone plumber's grease to the O-rings before installation ensures smooth insertion and prevents seal damage. Frequently Asked Questions Q: What exactly comes in this combo kit? A: You get three items: the GP76851 pressure balancing unit cartridge, the GP500520 cartridge, and the GP77759 mixer balance cap — everything for a complete Rite-Temp rebuild. Q: Do I need all three parts, or can I buy just the cartridge? A: If you're experiencing temperature fluctuations AND handle stiffness/leaking, replacing all three at once ensures a complete fix. For cartridge-only issues, we also sell the GP500520 individually. Q: How do I know which Rite-Temp model I have? A: Remove the handle and trim plate — look for "Rite-Temp" branding or the K-304/K-8300 valve body. If you see a single brass stem with a plastic body, this kit fits. Q: Will this stop my shower from going cold when the toilet flushes? A: Yes! Temperature fluctuations during other water use is the #1 symptom of a failing pressure balancing unit — the core function this kit restores. Q: What tools do I need? A: Phillips screwdriver, adjustable wrench, needle-nose pliers, and optionally a cartridge puller tool. Most DIYers have everything they need. Related Products & Resources Shop More Plumbing Parts Browse our full selection at unbeatable prices. View All Plumbing Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts Related Guide Read: Fix Your Kohler Rite-Temp Shower Valve

Read more less

Kohler Rite-Temp Pressure Balancing Unit — GP76851 The iFJF GP76851 pressure balancing unit cartridge is a precision-engineered replacement for Kohler Rite-Temp shower valves. This critical component maintains consistent water temperature by automatically balancing hot and cold water pressure — preventing the sudden temperature spikes that occur when a toilet flushes or a dishwasher starts elsewhere in the house. Includes the mixer cap for complete service. Key Features Pressure Balancing Diaphragm: Compensates for pressure fluctuations in both hot and cold lines — maintains ±2°F temperature stability Anti-Scald Protection: Automatically reduces hot water flow if cold water pressure drops, preventing dangerous temperature spikes Complete Kit: Includes GP76851 cartridge assembly AND GP76851 mixer cap — everything needed for a full service Direct OEM Replacement: Precision-molded to exact Kohler specifications for guaranteed fit and function Brass Internal Components: Corrosion-resistant brass construction for long service life in all water conditions Compatibility Valve Series Models Kohler Rite-Temp K-304, K-8304, K-8305, K-11748, K-T9477 Kohler Rite-Temp Pressure Balance K-8300, K-8303, K-8310, K-8313, K-TS396 Symptoms Your Pressure Balancing Unit Needs Replacement Water temperature fluctuates during shower without you touching the handle Sudden bursts of hot or cold water when other fixtures are used Shower handle is stiff or difficult to turn Dripping from the shower head when the valve is off Water doesn't get hot enough, even when handle is at maximum Installation Instructions Turn off water supply to the shower valve (main shutoff or integral stops) Remove handle trim — typically secured with a set screw under the decorative cap Remove the retainer clip securing the cartridge Pull out old cartridge — use a cartridge puller if stuck (mineral buildup) Clean valve body interior — remove any debris or mineral deposits Insert new GP76851 cartridge — ensure alignment tab engages properly Reinstall retainer clip, trim, and handle Turn water back on and test for leaks and temperature stability FAQ Q: How do I know if I have a Kohler Rite-Temp valve?A: Rite-Temp valves have a single handle that rotates to control temperature (not separate hot/cold handles). The trim plate typically says "Kohler" and the valve body is brass. Most Kohler shower valves installed since the 1990s are Rite-Temp. Q: What if my old cartridge is stuck?A: Mineral deposits can seize the cartridge. Apply penetrating oil (WD-40) to the valve body and let sit for 30 minutes. Use a Kohler cartridge puller tool for stubborn cases. Never use pliers directly on the cartridge stem — it will snap. Q: Is this compatible with hard water areas?A: Yes. The brass internal components resist mineral buildup better than plastic OEM cartridges. Still recommend annual exercising of the valve (turn full hot to full cold) to prevent sticking. Frequently Asked Questions Q: What's included: cartridge, cap, or both? A: This kit includes both the pressure balancing cartridge unit AND the mixer cap — everything you need for a complete Rite-Temp valve rebuild in one box. Q: How long does installation take? A: Most homeowners complete the swap in 15–25 minutes with basic tools — a screwdriver, adjustable wrench, and pliers. No soldering or pipe cutting required. Q: My shower handle is hard to turn — will this fix it? A: Yes! A stiff handle is a classic sign of a worn GP76851 cartridge. The new unit restores smooth, easy handle operation. Q: Do I need plumber's grease for installation? A: While not strictly required, applying a thin layer of silicone plumber's grease to the O-rings makes installation easier and helps with future removal. Q: Is this compatible with K-8304 valves? A: Yes, the GP76851 fits all Kohler Rite-Temp valves including K-304, K-8300, K-8304, and K-8305 series. Related Products & Resources Shop More Plumbing Parts Browse our full selection at unbeatable prices. View All Plumbing Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts

Read more less

GP77759 Mixer Balance Cap Stem — Kohler Rite-Temp Replacement The iFJF GP77759 mixer balance cap stem is a precision-machined replacement for worn or leaking Kohler Rite-Temp valve stems. When water starts seeping from around your shower handle or the temperature adjustment becomes imprecise, this component is often the root cause. Direct drop-in replacement — no modifications needed. Key Features Precision-Machined Brass Stem: Corrosion-resistant brass construction for decades of reliable service OEM-Spec Fit: Identical dimensions to Kohler GP77759 for seamless installation Complete Stem Assembly: Includes stem, O-rings, and seals — ready to install Smooth Temperature Control: Restores precise hot/cold mixing at the handle Leak-Free Seal: Fresh O-rings eliminate handle-area water seepage DIY Installation: Replaces in 10–15 minutes with basic hand tools Compatibility Brand Valve Series Size Kohler Rite-Temp K-304 1/2" Kohler Rite-Temp K-8300 Series 1/2" Specifications Specification Value Part Number GP77759 Stem Material Brass Valve Compatibility K-304, K-8300 Series Connection 1/2" Includes Stem, O-rings, seals Signs You Need a New GP77759 Water dripping from behind the shower handle Temperature dial feels loose or doesn't stay in position Difficulty finding the right water temperature mix Visible corrosion or mineral buildup on the existing stem Handle spins freely without changing water temperature Installation Steps Turn off water supply to shower valve Remove the shower handle (typically a set screw underneath) Remove the trim/escutcheon plate Unscrew and remove the old GP77759 stem using an adjustable wrench Clean the valve body threads and seating surface Apply plumber's grease to the new stem O-rings Thread the new GP77759 stem into the valve body — hand-tighten first, then 1/4 turn with wrench Reassemble the trim plate and handle Turn water back on and test for leaks and smooth operation Frequently Asked Questions Q: Is this just the cap/stem, or does it include the cartridge too? A: This is the GP77759 mixer balance cap stem only. For a complete rebuild including the pressure balancing cartridge, see our GP76851 combo kit. Q: Will this fit my K-8304 shower valve? A: Yes, the GP77759 fits all Kohler Rite-Temp K-304 and K-8300 series 1/2" pressure balance valves. Q: Can I replace just the O-rings instead of the whole stem? A: While possible, the brass stem itself wears over time. Given the low cost of this complete assembly, replacing the entire stem ensures a reliable, long-lasting fix. Q: How tight should I install the new stem? A: Hand-tighten until snug, then add no more than 1/4 turn with a wrench. Overtightening can crack the valve body or strip the threads. Related Products & Resources Shop More Plumbing Parts Browse our full selection at unbeatable prices. View All Plumbing Parts → Helpful Articles Installation Guides & How-Tos Maintenance Tips & Troubleshooting Buying Guide: Choosing the Right Parts

Read more less