Off Road

Features Perfect Fitment: Compatible with 2007-2021 Jeep Wrangler JK & JL Unlimited 2-Door and 4-Door models OEM Replacement: Replaces part number 68194821AA for direct fit installation Premium Material: Made of high-quality durable rubber, corrosion-resistant and long-lasting Effective Protection: Prevents water, dirt, and sand from entering floor pan during off-road adventures Easy Installation: Plug-and-play design installs in seconds, no tools required Compatibility Fitment: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021 Jeep Wrangler JK JKU JL JLU Unlimited (2-Door & 4-Door) FAQ Q: Will these fit my 2020 Jeep Wrangler JL? A: Yes, these drain stopples are compatible with Jeep Wrangler JL models from 2018-2021. Q: Are these difficult to install? A: No, they are designed for plug-and-play installation and can be installed in seconds without any tools. Q: What material are they made of? A: They are made of high-quality durable rubber that is corrosion-resistant and built to last.

Read more less

Features Premium Construction: Made from durable anodized aluminum for heavy-duty performance and long-lasting stability Performance Upgrade: Improves torque output and increases fuel economy for better overall engine efficiency Precision Fit: Designed specifically for 4-bolt throttle bodies on 4.0L and 2.5L engines Easy Installation: Direct bolt-on design requires no modifications for a straightforward upgrade Compatibility Jeep Wrangler YJ: 1987-1995 with 4.0L or 2.5L engine (4-bolt throttle body only) Jeep Wrangler TJ: 1997-2006 with 4.0L or 2.5L engine (4-bolt throttle body only) Jeep Cherokee XJ: 1984-2001 with 4.0L or 2.5L engine (4-bolt throttle body only) Jeep Comanche MJ: 1986-1992 with 4.0L or 2.5L engine (4-bolt throttle body only) Important: Only fits vehicles with 4-bolt throttle bodies. Does not fit newer drive-by-wire throttle bodies. FAQ Q: How much performance improvement can I expect? A: While results vary, users typically see 2-4 HP gains and improved throttle response, along with better fuel economy. Q: Will this fit my 2007 JK Wrangler? A: No, this spacer only fits YJ (87-95) and TJ (97-06) models with 4-bolt throttle bodies. JK models use a different throttle body design. Q: Do I need a tuner after installing this spacer? A: A tuner is not required but can help optimize the air-fuel mixture for maximum performance gains.

Read more less

Features Stainless Steel Construction — Braided stainless steel exterior resists off-road debris, rocks, and mud that can damage factory rubber brake lines. 21.5" Front Line Length — Part #RS6249, front pair extended to 21.5" to accommodate 4-6" suspension lifts without tension or slack. DOT Approved — Meets Department of Transportation standards for safe, reliable braking performance on and off the road. No Hose Expansion — Inner Teflon layer is protected from expansion (even at 4,000 PSI) by the braided stainless exterior, giving a firmer pedal feel. Compatibility Fits 1997-2006 Jeep Wrangler TJ (4WD) Fits 2004-2006 Jeep Wrangler TJ Unlimited (4WD) Fits 1987-1995 Jeep Wrangler YJ (4WD) Fits 1984-2001 Jeep Cherokee XJ (4WD & 2WD) Technical Note: Only fits models with 4-6" of suspension lift FAQQ: What length are these brake lines?A: These are the front pair, 21.5" in length (Part #RS6249), designed for 4-6" lifted Jeeps.Q: Will these fit my stock (non-lifted) Jeep?A: No, these are specifically for vehicles with 4-6" of suspension lift. Using them on a stock height Jeep will result in excess slack.Q: Are these compatible with stock brake fittings?A: Yes, the high-quality hollow fasteners at both ends match stock brake line connections for a leak-free installation.

Read more less

Dash Tray Mount Phone Holder with Storage Box for 2018-2019 | iFJFHigh-quality Jeep Parts replacement from iFJF. Dash Tray Mount Phone Holder with Storage Box for 2018-2019.Key Features OEM-spec quality and fit Durable construction for long service life Direct replacement — no modifications needed Q: Is this OEM quality?A: Yes, manufactured to meet or exceed OEM specifications.Q: Fast shipping?A: Yes, ships from iFJF warehouse within 1 business day.

Read more less

esla Model 3 Windshield Window/ Sunroof / Moonroof Wind Noise Lowering Reduction Seal Kit Version 2! Introducing a brand new item for the Tesla Model 3 is our exclusive specially made seal for the top edges between the windshield and sunroof / moonroof on the Tesla Model 3. If you notice, there is a gap between where the sunroof / moon roof and the front windshield meets on the Tesla Model 3. Tesla decided to use an under seal when they installed their window glass leaving a gap all around the top sunroof / moon-roof area, causing wind to be able to get in between the trench / gap and causing wind to enter your vehicle at higher speeds or places with higher wind velocity.

Read more less

Material: 100% pure silica gel production, Applicable for several years, high elasticity, high and low temperature resistance, ultraviolet resistanceFit: For any model 3, Precision cut and measured for direct fitment, just press it in without any tools.Function: Keeps debris such as leaves / petals / even dust from getting stuck in the window seal gap.Noise Reduction: Reduce wind noise from entering cabin at higher speeds, become a quieter model 3, Enjoyable. Car Roof Sunroof Top Window Glass Seal Strip Weatherproof for Tesla Model 3 Material: 100% pure silica gel production, Applicable for several years, high elasticity, high and low temperature resistance, ultraviolet resistance Function: Keeps debris such as leaves / petals / even dust from getting stuck in the window seal gap.

Read more less

Fitment:For Tesla Model S 2012-2021. Install position:Rear Trunk Outer Bumper Guard. Material:Made of Stainless Steel,Silver Color,Durable and great looking. Easy to install:Peel off the back release paper off the 3M tape. Make sure DO NOT let any water or dirty get on the tape.Then put the cover on the place it should be. Note:Please don't touch water and Keep dry after been install at least 24 hours.

Read more less

Features:❶ Replacement for Tesla Model 3 2017,2018,2019. it include 2pc❷ Clean the air in car，keep your car smelling fresh.❸ Contains soda and carbon to generate fresh breeze air❹ Large filtration area ,high-capacity of Dust ,long lifespan❺ Enhanced HVAC performance, Recommended replacement every 12 months or 12,000 milesINSTALLATION 1.Open the glove compartment.2.Pull the arm free from the glove compartment.3.Press inward on the sides of the glove compartment to disconnect the stops.4.Slide the filter frame out from the housing 5.Remove the old filter from the frame carefully 6.Install the new filter in the frame and make sure the direction of air flow is the same as the arrow on the side of filter indicates. 7.Slide the frame back into the housing and make sure it snaps securely

Read more less

100% brand new & High quality● Car Interior Center Console Cup Holder Gate Slot Mats● Made of high quality material, durable and practical to use● No-Slip, dirty-proof, wear-resistant, keep the car clean● Perfect designed for Tesla ● It can be placed in the door groove of the car and the water tank of the armrest to reduce the noise of small things. And can prevent Xiaodongdong from grinding the original plastic panel of the car, the first choice of car lovers!● Door slot mat. With water storage (dust, mud, snow) tank design, easy to clean. Imported high-quality environmental protection silica gel, with flame retardancy, durability and high quality, is not comparable to ordinary products. Beautiful, sporty and never slipping!

Read more less

100% new components and manufactured from high quality Deliver a flat-cornering feel and agile road handling. Added corrosion protection for longer service life. Manufactured to strict standards using sturdy safe materials Easy to install!Comes with all necessary hardware for easy, fast installation Highly precise engineering, precision-machined forged, to make sure assemble hole , and installation sizes are proper. Fitment:Tesla Model S 2012-2018 Electric Sedan Front Left Lower ForwardPackage includes:2x Control ArmFeatures:Part Number: 1041570-00-B,1041570-00-A,104157000B,104157000A,1041570,1041575-00-A,1041575-00-B,6006664-00-CHigh quality, brand new control armsQuality tested to ensure easy installation, optimal performance, and enhanced durabilityBuilt to meet or exceed your vehicles requirements for fitment, structural configuration, strength, and torqueHelp Save Time and More ProfessionalNote:Please make sure that whether the control arm fits your vehicle or not before placing order.The product already contained grease and no additional addition is required.Any question, please email us freely.

Read more less