385311462 VacuFlush Toilet Seal Kit for Dometic Sealand 110 111 210 510 — Teflon

Description

Product Overview

Stop bowl water loss and sewer odors with this upgraded Teflon-faced toilet seal kit for Dometic Sealand VacuFlush toilets. Designed for models 110, 111, 210, and 510 — common in higher-end RVs, boats, and marine applications — this kit replaces both the 385311462 and 385310677 seal assemblies. The Teflon-faced polymer disk with raised alignment groove outperforms standard rubber seals, maintaining its shape through thousands of flush cycles and creating an odor-tight seal that lasts significantly longer.

Key Features

  • Upgraded Teflon-Faced Disk — Unlike standard rubber seals that develop compression set (permanent flattening), the Teflon surface resists deformation through thousands of flush cycles, maintaining a consistent seal.
  • Raised Alignment Groove — Precision-molded groove centers the seal on the VacuFlush ball valve for even wear distribution and consistent sealing pressure around the entire circumference.
  • Complete Seal Kit — Includes Teflon-faced seal disk, mounting ring, O-rings, and silicone lubricant packet — no additional parts needed for a complete rebuild.
  • Direct OEM Replacement — Exact replacement for Dometic/Sealand part numbers 385311462 and 385310677. Same dimensions, same fit, upgraded material.
  • Marine & RV Compatible — Works in both recreational vehicle and marine (boat/yacht) installations with VacuFlush toilet systems.

Compatibility / Fitment

Brand Series Models Replaces Part #
Dometic / Sealand VacuFlush 110, 111, 210, 510 385311462, 385310677

Technical Specifications

Specification Value
Part Numbers 385311462, 385310677
Seal Material Teflon-Faced Polymer Disk
Kit Contents Seal Disk, Mounting Ring, O-Rings, Silicone Lube
Compatible Flush Type VacuFlush (Vacuum Flush)
Installation Time 30-45 Minutes

Why Choose This

VacuFlush toilets are premium systems — and their seals demand premium materials. Standard rubber seals on these toilets often fail within 1-2 years, letting bowl water drain into the holding tank (creating sewer gas path) and allowing odors to enter the living space. The Teflon-faced design in this kit addresses both failure modes: it maintains its shape (no compression set) and creates a superior gas-tight barrier. Marine boat owners especially benefit, as salt air accelerates rubber degradation significantly.

Related Products

Frequently Asked Questions

Q: Will this fit my VacuFlush 510 Plus series?
A: Yes. The 510 series (including 510 Plus) uses this exact seal kit. The seal interface is common across all 110, 111, 210, and 510 VacuFlush toilet models from Dometic/Sealand.

Q: How is Teflon better than the standard rubber seal?
A: Teflon-faced seals resist compression set — the permanent flattening that causes rubber seals to lose their shape. This means a consistent seal over many more flush cycles. Teflon also has a lower coefficient of friction, reducing wear on the flush ball surface.

Q: Why is my toilet bowl water dropping within hours?
A: When the VacuFlush seal fails, water slowly drains from the bowl into the holding tank. This also creates an open path for sewer gases to enter the bathroom. Replace the seal to fix both issues simultaneously.

Q: How often should I replace the VacuFlush seals?
A: Under normal RV use, every 2-3 years. In marine (saltwater) environments or full-time liveaboard use, every 1-2 years. Replace sooner if you notice the bowl losing water or detect sewer odors.

Q: Does this kit include the silicone lubricant?
A: Yes. A packet of silicone lubricant is included. Apply lightly to the Teflon seal surface during installation — this helps the seal bed in and ensures smooth flush ball operation from day one.

Q: Can I install this myself or do I need a tech?
A: DIY-friendly with basic mechanical skills. Budget 30-45 minutes. Key steps: shut off water, flush to empty bowl, remove toilet from flange, replace seal components, reassemble, test with 4-5 flushes.

Order with Confidence

Fast shipping from our US warehouse. Dedicated customer support team ready to answer your questions. Click Add to Cart to get your order started today.

Related Guides & Articles

Check out these helpful resources from the iFJF blog:

385311462 VacuFlush Toilet Seal Kit for Dometic Sealand 110 111 210 510 — Teflon

Product form

SKU: FJ-SEAL16-WH

$25.99

      Description

      Product Overview

      Stop bowl water loss and sewer odors with this upgraded Teflon-faced toilet seal kit for Dometic Sealand VacuFlush toilets. Designed for models 110, 111, 210, and 510 — common in higher-end RVs, boats, and marine applications — this kit replaces both the 385311462 and 385310677 seal assemblies. The Teflon-faced polymer disk with raised alignment groove outperforms standard rubber seals, maintaining its shape through thousands of flush cycles and creating an odor-tight seal that lasts significantly longer.

      Key Features

      • Upgraded Teflon-Faced Disk — Unlike standard rubber seals that develop compression set (permanent flattening), the Teflon surface resists deformation through thousands of flush cycles, maintaining a consistent seal.
      • Raised Alignment Groove — Precision-molded groove centers the seal on the VacuFlush ball valve for even wear distribution and consistent sealing pressure around the entire circumference.
      • Complete Seal Kit — Includes Teflon-faced seal disk, mounting ring, O-rings, and silicone lubricant packet — no additional parts needed for a complete rebuild.
      • Direct OEM Replacement — Exact replacement for Dometic/Sealand part numbers 385311462 and 385310677. Same dimensions, same fit, upgraded material.
      • Marine & RV Compatible — Works in both recreational vehicle and marine (boat/yacht) installations with VacuFlush toilet systems.

      Compatibility / Fitment

      Brand Series Models Replaces Part #
      Dometic / Sealand VacuFlush 110, 111, 210, 510 385311462, 385310677

      Technical Specifications

      Specification Value
      Part Numbers 385311462, 385310677
      Seal Material Teflon-Faced Polymer Disk
      Kit Contents Seal Disk, Mounting Ring, O-Rings, Silicone Lube
      Compatible Flush Type VacuFlush (Vacuum Flush)
      Installation Time 30-45 Minutes

      Why Choose This

      VacuFlush toilets are premium systems — and their seals demand premium materials. Standard rubber seals on these toilets often fail within 1-2 years, letting bowl water drain into the holding tank (creating sewer gas path) and allowing odors to enter the living space. The Teflon-faced design in this kit addresses both failure modes: it maintains its shape (no compression set) and creates a superior gas-tight barrier. Marine boat owners especially benefit, as salt air accelerates rubber degradation significantly.

      Related Products

      Frequently Asked Questions

      Q: Will this fit my VacuFlush 510 Plus series?
      A: Yes. The 510 series (including 510 Plus) uses this exact seal kit. The seal interface is common across all 110, 111, 210, and 510 VacuFlush toilet models from Dometic/Sealand.

      Q: How is Teflon better than the standard rubber seal?
      A: Teflon-faced seals resist compression set — the permanent flattening that causes rubber seals to lose their shape. This means a consistent seal over many more flush cycles. Teflon also has a lower coefficient of friction, reducing wear on the flush ball surface.

      Q: Why is my toilet bowl water dropping within hours?
      A: When the VacuFlush seal fails, water slowly drains from the bowl into the holding tank. This also creates an open path for sewer gases to enter the bathroom. Replace the seal to fix both issues simultaneously.

      Q: How often should I replace the VacuFlush seals?
      A: Under normal RV use, every 2-3 years. In marine (saltwater) environments or full-time liveaboard use, every 1-2 years. Replace sooner if you notice the bowl losing water or detect sewer odors.

      Q: Does this kit include the silicone lubricant?
      A: Yes. A packet of silicone lubricant is included. Apply lightly to the Teflon seal surface during installation — this helps the seal bed in and ensures smooth flush ball operation from day one.

      Q: Can I install this myself or do I need a tech?
      A: DIY-friendly with basic mechanical skills. Budget 30-45 minutes. Key steps: shut off water, flush to empty bowl, remove toilet from flange, replace seal components, reassemble, test with 4-5 flushes.

      Order with Confidence

      Fast shipping from our US warehouse. Dedicated customer support team ready to answer your questions. Click Add to Cart to get your order started today.

      Related Guides & Articles

      Check out these helpful resources from the iFJF blog:

      Recently viewed products

      © 2026 iFJF Direct | Sitemap

        • American Express
        • Diners Club
        • Discover
        • Maestro
        • Mastercard
        • PayPal
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create account