Description
Product Overview
The iFJF 6PK1170 is a premium 6-rib EPDM serpentine belt engineered to deliver reliable, quiet, and long-lasting performance for your vehicle's accessory drive system. Measuring 40.06" (1018mm) in effective length with 6 ribs, this serpentine drive belt is manufactured from high-grade ethylene propylene diene monomer (EPDM) rubber — the same material used by OEM manufacturers — ensuring superior resistance to heat, ozone, and wear compared to traditional neoprene belts.
Whether you need a replacement serpentine belt for daily driving or a heavy-duty belt for demanding conditions, the iFJF 6PK1170 provides OE-spec fit, form, and function at a fraction of dealership pricing. Every belt undergoes rigorous quality testing to meet or exceed SAE J1459 standards for automotive V-ribbed belts.
Key Features
-
Premium EPDM Construction: Heat-resistant (-40°F to +275°F), ozone-resistant, and crack-resistant for extended service life — outperforms neoprene belts by 2-3x
-
Precision Fit: 6-rib profile with 40.06" (1018mm) effective length ensures perfect pulley engagement and minimal slippage
-
Quiet Operation: Advanced rib geometry and fabric backing reduce noise, vibration, and harshness (NVH) for a smooth, quiet drive
-
OE-Spec Performance: Meets or exceeds OEM specifications for dimensional accuracy, tensile strength, and wear resistance
-
Universal Application: Compatible with multiple makes and models — verify your vehicle's belt routing diagram before installation
-
Cost-Effective: Dealer-quality performance without dealer pricing — save 40-60% vs. OEM dealership belts
Vehicle Compatibility
This 6PK1170 serpentine drive belt is compatible with the following vehicles (verify part number and belt length before ordering):
| Make / Model |
Year Range |
| RDX |
2016-2018 |
| TLX |
2015-2020 |
| MDX |
2014-2016 |
| RLX |
2014-2017 |
| Accord |
2013-2017 |
| Crosstour |
2013-2015 |
Note: Always confirm your existing belt's part number and rib count before ordering. Belt length can vary by engine configuration and accessory options.
Technical Specifications
| Part Number |
6PK1170 |
| Belt Type |
Serpentine / V-Ribbed / Multi-Rib |
| Rib Count |
6 Ribs |
| Effective Length |
40.06" (1018mm) |
| Material |
EPDM (Ethylene Propylene Diene Monomer) Rubber |
| Temperature Range |
-40°F to +275°F (-40°C to +135°C) |
| Standards |
SAE J1459, ISO 9981 Compliant |
| Cross References |
K1170 |
| Brand |
iFJF Direct |
Why Choose the iFJF 6PK1170?
When your serpentine belt fails, it takes your alternator, power steering, A/C compressor, and water pump with it. The iFJF 6PK1170 is built to prevent that failure — with EPDM rubber that resists cracking, glazing, and stretching far longer than economy neoprene belts. Our precision-engineered rib profile ensures maximum contact area with pulleys, reducing slippage by up to 30% compared to generic replacement belts.
Every iFJF serpentine belt is manufactured in ISO 9001-certified facilities and undergoes dimensional verification, tensile testing, and thermal cycling before packaging. The result? A belt you can install with confidence and drive for thousands of miles without worry.
Installation Tips
-
Check the Belt Routing Diagram: Locate the belt routing sticker under your hood or in your owner's manual before removing the old belt
-
Use a Serpentine Belt Tool: A serpentine belt tensioner tool makes removal and installation significantly easier and safer
-
Inspect Pulleys & Tensioner: Worn pulleys or a weak tensioner can cause premature belt failure — inspect and replace as needed
-
Clean Pulley Grooves: Remove debris and old rubber residue from all pulley grooves before installing the new belt
-
Verify Alignment: Ensure the belt sits squarely in all pulley grooves — misalignment causes noise and rapid wear
-
Rotate by Hand: After installation, rotate the engine by hand (wrench on crank bolt) through two full revolutions to verify proper seating
Frequently Asked Questions
Q: How do I know if this belt fits my vehicle?
A: Check your vehicle's belt routing diagram for the correct part number and rib count. The 6PK1170 is a 6-rib serpentine belt measuring 40.06" (1018mm). Match these specifications plus verify cross-reference part numbers. When in doubt, measure your existing belt's length and count the ribs.
Q: What's the difference between EPDM and neoprene belts?
A: EPDM (ethylene propylene diene monomer) rubber offers superior heat resistance (-40°F to +275°F), ozone resistance, and crack resistance compared to neoprene. Most OEM serpentine belts are EPDM. EPDM belts typically last 50,000-100,000 miles, while neoprene belts may fail at 30,000-50,000 miles. EPDM also stays quieter as it ages.
Q: How often should I replace my serpentine belt?
A: Most manufacturers recommend serpentine belt inspection at 60,000 miles and replacement at 90,000-100,000 miles. However, belts can wear faster in extreme heat, dusty conditions, or with aggressive driving. Signs of wear include squealing, cracking, glazing, fraying, or visible rib separation.
Q: What are the symptoms of a failing serpentine belt?
A: Common symptoms include: squealing or chirping noise from the engine bay (especially on startup or when turning the A/C on), loss of power steering assist, battery warning light (alternator not charging), engine overheating (water pump not spinning), and visible cracks, fraying, or glazing on the belt surface.
Q: Does this belt come with a warranty?
A: Yes. All iFJF serpentine belts are backed by our 1-year warranty against manufacturing defects and premature wear under normal use. If you experience any issues, contact our support team for a replacement or refund.
Q: Can I install this serpentine belt myself?
A: Yes — replacing a serpentine belt is a DIY-friendly job for most vehicles. You'll need basic hand tools (ratchet/socket set) and a serpentine belt tensioner tool. Typical installation takes 30-60 minutes for first-timers, 15-20 minutes for experienced DIYers. Always follow your vehicle's belt routing diagram.
Q: Why is my new serpentine belt squealing?
A: A squealing new belt typically indicates one of three issues: (1) misaligned or worn pulleys, (2) a weak or failing belt tensioner that can't maintain proper tension, or (3) contamination (oil, coolant, or debris) on the pulleys. Clean all pulley surfaces and check tensioner function before assuming the belt is defective.
Q: What's the difference between a serpentine belt and a V-belt?
A: A serpentine belt (also called a multi-rib or V-ribbed belt) has multiple longitudinal ribs that drive all engine accessories (alternator, power steering, A/C, water pump) from a single belt with an automatic tensioner. A traditional V-belt has a single V-shaped cross-section, and vehicles with V-belts typically use multiple separate belts. Serpentine belts are more efficient, quieter, and last longer.
Ready to replace your worn serpentine belt? Order the iFJF 6PK1170 today and get back on the road with confidence!
Related Serpentine Belts
Looking for other 6PK EPDM serpentine belts? Check these compatible options:
Related Maintenance Guides
Complement your serpentine belt replacement with these essential maintenance guides from our blog:
